From: Vidya Sagar <vidyas@nvidia.com>
To: <lorenzo.pieralisi@arm.com>, <bhelgaas@google.com>,
<robh+dt@kernel.org>, <thierry.reding@gmail.com>,
<jonathanh@nvidia.com>, <andrew.murray@arm.com>
Cc: devicetree@vger.kernel.org, mmaddireddy@nvidia.com,
kthota@nvidia.com, gustavo.pimentel@synopsys.com,
linux-kernel@vger.kernel.org, kishon@ti.com,
linux-pci@vger.kernel.org, linux-tegra@vger.kernel.org,
vidyas@nvidia.com, linux-arm-kernel@lists.infradead.org,
sagar.tv@gmail.com
Subject: [PATCH 4/6] arm64: tegra: Add PCIe endpoint controllers nodes for Tegra194
Date: Fri, 22 Nov 2019 16:15:03 +0530 [thread overview]
Message-ID: <20191122104505.8986-5-vidyas@nvidia.com> (raw)
In-Reply-To: <20191122104505.8986-1-vidyas@nvidia.com>
Add endpoint mode controllers nodes for the dual mode PCIe controllers
present in Tegra194 SoC.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 99 ++++++++++++++++++++++++
1 file changed, 99 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 11220d97adb8..2c8fae854a23 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -1425,6 +1425,105 @@
0x82000000 0x0 0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
};
+ pcie_ep@14160000 {
+ compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
+ reg = <0x00 0x14160000 0x0 0x00020000 /* appl registers (128K) */
+ 0x00 0x36040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */
+ 0x00 0x36080000 0x0 0x00040000 /* DBI reg space (256K) */
+ 0x14 0x00000000 0x4 0x00000000>; /* Address Space (16G) */
+ reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+ status = "disabled";
+
+ num-lanes = <4>;
+ num-ib-windows = <2>;
+ num-ob-windows = <8>;
+
+ clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>;
+ clock-names = "core";
+
+ resets = <&bpmp TEGRA194_RESET_PEX0_CORE_4_APB>,
+ <&bpmp TEGRA194_RESET_PEX0_CORE_4>;
+ reset-names = "apb", "core";
+
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "intr";
+
+ nvidia,bpmp = <&bpmp 4>;
+
+ nvidia,aspm-cmrt-us = <60>;
+ nvidia,aspm-pwr-on-t-us = <20>;
+ nvidia,aspm-l0s-entrance-latency-us = <3>;
+ };
+
+ pcie_ep@14180000 {
+ compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
+ reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */
+ 0x00 0x38040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */
+ 0x00 0x38080000 0x0 0x00040000 /* DBI reg space (256K) */
+ 0x18 0x00000000 0x4 0x00000000>; /* Address Space (16G) */
+ reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+ status = "disabled";
+
+ num-lanes = <8>;
+ num-ib-windows = <2>;
+ num-ob-windows = <8>;
+
+ clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
+ clock-names = "core";
+
+ resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
+ <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
+ reset-names = "apb", "core";
+
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "intr";
+
+ nvidia,bpmp = <&bpmp 0>;
+
+ nvidia,aspm-cmrt-us = <60>;
+ nvidia,aspm-pwr-on-t-us = <20>;
+ nvidia,aspm-l0s-entrance-latency-us = <3>;
+ };
+
+ pcie_ep@141a0000 {
+ compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+ reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */
+ 0x00 0x3a040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */
+ 0x00 0x3a080000 0x0 0x00040000 /* DBI reg space (256K) */
+ 0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */
+ reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+ status = "disabled";
+
+ num-lanes = <8>;
+ num-ib-windows = <2>;
+ num-ob-windows = <8>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&clkreq_c5_bi_dir_state>;
+
+ clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+ clock-names = "core";
+
+ resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+ <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+ reset-names = "apb", "core";
+
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "intr";
+
+ nvidia,bpmp = <&bpmp 5>;
+
+ nvidia,aspm-cmrt-us = <60>;
+ nvidia,aspm-pwr-on-t-us = <20>;
+ nvidia,aspm-l0s-entrance-latency-us = <3>;
+ };
+
sysram@40000000 {
compatible = "nvidia,tegra194-sysram", "mmio-sram";
reg = <0x0 0x40000000 0x0 0x50000>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-11-22 10:46 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-22 10:44 [PATCH 0/6] Add support for PCIe endpoint mode in Tegra194 Vidya Sagar
2019-11-22 10:45 ` [PATCH 1/6] soc/tegra: bpmp: Update ABI header Vidya Sagar
2019-11-22 10:45 ` [PATCH 2/6] dt-bindings: PCI: tegra: Add DT support for PCIe EP nodes in Tegra194 Vidya Sagar
2019-11-22 13:19 ` Thierry Reding
2019-11-25 7:23 ` Vidya Sagar
2019-11-25 7:33 ` Thierry Reding
2019-11-25 11:52 ` Gustavo Pimentel
2019-11-29 13:26 ` Vidya Sagar
2019-12-05 9:57 ` Vidya Sagar
2019-12-04 21:43 ` Rob Herring
2019-11-22 10:45 ` [PATCH 3/6] PCI: tegra: Add support for PCIe endpoint mode " Vidya Sagar
2019-11-26 21:37 ` Bjorn Helgaas
2019-11-29 13:22 ` Vidya Sagar
2019-11-22 10:45 ` Vidya Sagar [this message]
2019-11-22 10:45 ` [PATCH 5/6] arm64: tegra: Enable GPIO controllers nodes for P2972-0000 platform Vidya Sagar
2019-11-22 13:20 ` Thierry Reding
2019-11-25 6:55 ` Vidya Sagar
2019-11-22 10:45 ` [PATCH 6/6] arm64: tegra: Add support for PCIe endpoint mode in " Vidya Sagar
2019-11-22 13:25 ` Thierry Reding
2019-11-25 7:00 ` Vidya Sagar
2019-11-25 7:25 ` Thierry Reding
2019-11-25 7:33 ` Vidya Sagar
2019-11-25 7:37 ` Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191122104505.8986-5-vidyas@nvidia.com \
--to=vidyas@nvidia.com \
--cc=andrew.murray@arm.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=gustavo.pimentel@synopsys.com \
--cc=jonathanh@nvidia.com \
--cc=kishon@ti.com \
--cc=kthota@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mmaddireddy@nvidia.com \
--cc=robh+dt@kernel.org \
--cc=sagar.tv@gmail.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).