Re: [PATCH 4/5] ARM: dts: ux500: Add pin configs for UART1 CTS/RTS pins

[Stephan Gerhold <stephan@gerhold.net>]

On Mon, Nov 25, 2019 at 01:22:55PM +0100, Stephan Gerhold wrote:
> UART1 an be optionally used with additional CTS/RTS pins.

s/an/can, duh.
I will fix this if a v2 is needed for some reason; otherwise,
can you fix this when applying the patch?

Thanks!

> The pinctrl driver has an extra "u1ctsrts_a_1" pin group for them.
> 
> Add a new pin configuration to configure them correctly if needed.
> 
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
> ---
>  arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi | 26 +++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
> index b6d0a60e9aed..e85a08ad2ea7 100644
> --- a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
> @@ -65,6 +65,32 @@
>  				ste,config = <&slpm_out_wkup_pdis>;
>  			};
>  		};
> +
> +		u1ctsrts_a_1_default: u1ctsrts_a_1_default {
> +			default_mux {
> +				function = "u1";
> +				groups = "u1ctsrts_a_1";
> +			};
> +			default_cfg1 {
> +				pins = "GPIO6_AF6"; /* CTS */
> +				ste,config = <&in_pu>;
> +			};
> +			default_cfg2 {
> +				pins = "GPIO7_AG5"; /* RTS */
> +				ste,config = <&out_hi>;
> +			};
> +		};
> +
> +		u1ctsrts_a_1_sleep: u1ctsrts_a_1_sleep {
> +			sleep_cfg1 {
> +				pins = "GPIO6_AF6"; /* CTS */
> +				ste,config = <&slpm_in_wkup_pdis>;
> +			};
> +			sleep_cfg2 {
> +				pins = "GPIO7_AG5"; /* RTS */
> +				ste,config = <&slpm_out_hi_wkup_pdis>;
> +			};
> +		};
>  	};
>  
>  	uart2 {
> -- 
> 2.24.0
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel