From: Robin van der Gracht <robin@protonic.nl>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Robin van der Gracht <robin@protonic.nl>,
Adam Ford <aford173@gmail.com>,
Marco Felsch <m.felsch@pengutronix.de>,
"linux-kernel @ vger . kernel . org"
<linux-kernel@vger.kernel.org>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
"linux-input @ vger . kernel . org" <linux-input@vger.kernel.org>,
RobinGong <yibin.gong@nxp.com>, Shawn Guo <shawnguo@kernel.org>,
"linux-arm-kernel @ lists . infradead . org"
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v4] input: keyboard: snvs_pwrkey: Send key events for i.MX6 S, DL and Q
Date: Mon, 25 Nov 2019 17:12:10 +0100 [thread overview]
Message-ID: <20191125161210.8275-1-robin@protonic.nl> (raw)
The first generation i.MX6 processors does not send an interrupt when the
power key is pressed. It sends a power down request interrupt if the key is
released before a hard shutdown (5 second press). This should allow
software to bring down the SoC safely.
For this driver to work as a regular power key with the older SoCs, we need
to send a keypress AND release when we get the power down request irq.
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
---
Changes v3 -> v4:
* The key release irq handler is now emitting the press and release
events directly, instead of the debounce timer handler.
drivers/input/keyboard/Kconfig | 2 +-
drivers/input/keyboard/snvs_pwrkey.c | 28 +++++++++++++++++++++++++---
2 files changed, 26 insertions(+), 4 deletions(-)
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 7c4f19dab34f..937e58da5ce1 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -436,7 +436,7 @@ config KEYBOARD_SNVS_PWRKEY
depends on OF
help
This is the snvs powerkey driver for the Freescale i.MX application
- processors that are newer than i.MX6 SX.
+ processors.
To compile this driver as a module, choose M here; the
module will be called snvs_pwrkey.
diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
index 5342d8d45f81..4888e137cc5d 100644
--- a/drivers/input/keyboard/snvs_pwrkey.c
+++ b/drivers/input/keyboard/snvs_pwrkey.c
@@ -19,6 +19,7 @@
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
+#define SNVS_HPVIDR1_REG 0xF8
#define SNVS_LPSR_REG 0x4C /* LP Status Register */
#define SNVS_LPCR_REG 0x38 /* LP Control Register */
#define SNVS_HPSR_REG 0x14
@@ -37,6 +38,7 @@ struct pwrkey_drv_data {
int wakeup;
struct timer_list check_timer;
struct input_dev *input;
+ u8 minor_rev;
};
static void imx_imx_snvs_check_for_events(struct timer_list *t)
@@ -67,13 +69,29 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
{
struct platform_device *pdev = dev_id;
struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+ struct input_dev *input = pdata->input;
u32 lp_status;
- pm_wakeup_event(pdata->input->dev.parent, 0);
+ pm_wakeup_event(input->dev.parent, 0);
regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status);
- if (lp_status & SNVS_LPSR_SPO)
- mod_timer(&pdata->check_timer, jiffies + msecs_to_jiffies(DEBOUNCE_TIME));
+ if (lp_status & SNVS_LPSR_SPO) {
+ if (pdata->minor_rev == 0) {
+ /*
+ * The first generation i.MX6 SoCs only sends an
+ * interrupt on button release. To mimic power-key
+ * usage, we'll prepend a press event.
+ */
+ input_report_key(input, pdata->keycode, 1);
+ input_sync(input);
+ input_report_key(input, pdata->keycode, 0);
+ input_sync(input);
+ pm_relax(input->dev.parent);
+ } else {
+ mod_timer(&pdata->check_timer,
+ jiffies + msecs_to_jiffies(DEBOUNCE_TIME));
+ }
+ }
/* clear SPO status */
regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO);
@@ -94,6 +112,7 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
struct input_dev *input = NULL;
struct device_node *np;
int error;
+ u32 vid;
/* Get SNVS register Page */
np = pdev->dev.of_node;
@@ -123,6 +142,9 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
return -EINVAL;
}
+ regmap_read(pdata->snvs, SNVS_HPVIDR1_REG, &vid);
+ pdata->minor_rev = vid & 0xff;
+
regmap_update_bits(pdata->snvs, SNVS_LPCR_REG, SNVS_LPCR_DEP_EN, SNVS_LPCR_DEP_EN);
/* clear the unexpected interrupt before driver ready */
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-11-25 16:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-25 16:12 Robin van der Gracht [this message]
2019-11-25 21:13 ` [PATCH v4] input: keyboard: snvs_pwrkey: Send key events for i.MX6 S, DL and Q Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191125161210.8275-1-robin@protonic.nl \
--to=robin@protonic.nl \
--cc=aford173@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.felsch@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=yibin.gong@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).