Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <vkoul@kernel.org>, <robh+dt@kernel.org>, <nm@ti.com>,
	<ssantosh@kernel.org>
Cc: devicetree@vger.kernel.org, grygorii.strashko@ti.com,
	vigneshr@ti.com, lokeshvutla@ti.com, j-keerthy@ti.com,
	linux-kernel@vger.kernel.org, t-kristo@ti.com, tony@atomide.com,
	dmaengine@vger.kernel.org, dan.j.williams@intel.com,
	frowand.list@gmail.com, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 17/18] dmaengine: ti: k3-udma-glue: Allow the driver to be built as module
Date: Mon, 23 Dec 2019 13:04:57 +0200
Message-ID: <20191223110458.30766-18-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20191223110458.30766-1-peter.ujfalusi@ti.com>

The ring accelerator driver can be built as module since all depending
functions are exported.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 drivers/dma/ti/Kconfig        | 2 +-
 drivers/dma/ti/k3-udma-glue.c | 4 +++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/ti/Kconfig b/drivers/dma/ti/Kconfig
index beb000be7d1b..987339e6f517 100644
--- a/drivers/dma/ti/Kconfig
+++ b/drivers/dma/ti/Kconfig
@@ -48,7 +48,7 @@ config TI_K3_UDMA
 	  DMA engine is used in AM65x and j721e.
 
 config TI_K3_UDMA_GLUE_LAYER
-	bool "Texas Instruments UDMA Glue layer for non DMAengine users"
+	tristate "Texas Instruments UDMA Glue layer for non DMAengine users"
 	depends on ARCH_K3 || COMPILE_TEST
 	depends on TI_K3_UDMA
 	help
diff --git a/drivers/dma/ti/k3-udma-glue.c b/drivers/dma/ti/k3-udma-glue.c
index c1511298ece2..fe3f96f6e0a1 100644
--- a/drivers/dma/ti/k3-udma-glue.c
+++ b/drivers/dma/ti/k3-udma-glue.c
@@ -10,7 +10,7 @@
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
-#include <linux/init.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/soc/ti/k3-ringacc.h>
@@ -1196,3 +1196,5 @@ int k3_udma_glue_rx_get_irq(struct k3_udma_glue_rx_channel *rx_chn,
 	return flow->virq;
 }
 EXPORT_SYMBOL_GPL(k3_udma_glue_rx_get_irq);
+
+MODULE_LICENSE("GPL v2");
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-23 11:04 [PATCH v8 00/18] dmaengine/soc: Add Texas Instruments UDMA support Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 01/18] bindings: soc: ti: add documentation for k3 ringacc Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 02/18] soc: ti: k3: add navss ringacc driver Peter Ujfalusi
2019-12-23 11:38   ` Peter Ujfalusi
2020-01-13 21:28     ` santosh.shilimkar
2020-01-14  6:58       ` Peter Ujfalusi
2020-01-14  8:11         ` Sekhar Nori
2020-01-14 18:06           ` santosh.shilimkar
2020-01-15  9:44             ` Peter Ujfalusi
2020-01-15 12:24               ` Vinod Koul
2020-01-15 18:26                 ` santosh.shilimkar
2019-12-23 11:04 ` [PATCH v8 03/18] dmaengine: doc: Add sections for per descriptor metadata support Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 04/18] dmaengine: Add metadata_ops for dma_async_tx_descriptor Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 05/18] dmaengine: Add support for reporting DMA cached data amount Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 06/18] dmaengine: Add helper function to convert direction value to text Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 07/18] dmaengine: ti: Add cppi5 header for K3 NAVSS/UDMA Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 08/18] dmaengine: ti: k3 PSI-L remote endpoint configuration Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 09/18] dt-bindings: dma: ti: Add document for K3 UDMA Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 10/18] dmaengine: ti: New driver " Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 11/18] dmaengine: ti: k3-udma: Add glue layer for non DMAengine users Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 12/18] firmware: ti_sci: rm: Add support for tx_tdtype parameter for tx channel Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 13/18] dmaengine: ti: k3-udma: Wait for peer teardown completion if supported Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 14/18] of: irq: Export of_msi_get_domain Peter Ujfalusi
2019-12-23 11:36   ` Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 15/18] firmware: ti_sci: Export devm_ti_sci_get_of_resource for modules Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 16/18] dmaengine: ti: k3-udma: Allow the driver to be built as module Peter Ujfalusi
2019-12-23 11:04 ` Peter Ujfalusi [this message]
2019-12-23 11:04 ` [PATCH v8 18/18] soc: ti: k3-ringacc: " Peter Ujfalusi
2020-01-21  7:41 ` [PATCH v8 00/18] dmaengine/soc: Add Texas Instruments UDMA support Vinod Koul

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191223110458.30766-18-peter.ujfalusi@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=dan.j.williams@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=frowand.list@gmail.com \
    --cc=grygorii.strashko@ti.com \
    --cc=j-keerthy@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=ssantosh@kernel.org \
    --cc=t-kristo@ti.com \
    --cc=tony@atomide.com \
    --cc=vigneshr@ti.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git