Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <vkoul@kernel.org>, <robh+dt@kernel.org>, <nm@ti.com>,
	<ssantosh@kernel.org>
Cc: devicetree@vger.kernel.org, grygorii.strashko@ti.com,
	vigneshr@ti.com, lokeshvutla@ti.com, j-keerthy@ti.com,
	linux-kernel@vger.kernel.org, t-kristo@ti.com, tony@atomide.com,
	dmaengine@vger.kernel.org, dan.j.williams@intel.com,
	frowand.list@gmail.com, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 08/18] dmaengine: ti: k3 PSI-L remote endpoint configuration
Date: Mon, 23 Dec 2019 13:04:48 +0200
Message-ID: <20191223110458.30766-9-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20191223110458.30766-1-peter.ujfalusi@ti.com>

In K3 architecture the DMA operates within threads. One end of the thread
is UDMAP, the other is on the peripheral side.

The UDMAP channel configuration depends on the needs of the remote
endpoint and it can be differ from peripheral to peripheral.

This patch adds database for am654 and j721e and small API to fetch the
PSI-L endpoint configuration from the database which should only used by
the DMA driver(s).

Another API is added for native peripherals to give possibility to pass new
configuration for the threads they are using, which is needed to be able to
handle changes caused by different firmware loaded for the peripheral for
example.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 drivers/dma/ti/Kconfig         |   3 +
 drivers/dma/ti/Makefile        |   1 +
 drivers/dma/ti/k3-psil-am654.c | 175 ++++++++++++++++++++++++++
 drivers/dma/ti/k3-psil-j721e.c | 222 +++++++++++++++++++++++++++++++++
 drivers/dma/ti/k3-psil-priv.h  |  39 ++++++
 drivers/dma/ti/k3-psil.c       |  93 ++++++++++++++
 include/linux/dma/k3-psil.h    |  71 +++++++++++
 7 files changed, 604 insertions(+)
 create mode 100644 drivers/dma/ti/k3-psil-am654.c
 create mode 100644 drivers/dma/ti/k3-psil-j721e.c
 create mode 100644 drivers/dma/ti/k3-psil-priv.h
 create mode 100644 drivers/dma/ti/k3-psil.c
 create mode 100644 include/linux/dma/k3-psil.h

diff --git a/drivers/dma/ti/Kconfig b/drivers/dma/ti/Kconfig
index d507c24fbf31..72f3d2728178 100644
--- a/drivers/dma/ti/Kconfig
+++ b/drivers/dma/ti/Kconfig
@@ -34,5 +34,8 @@ config DMA_OMAP
 	  Enable support for the TI sDMA (System DMA or DMA4) controller. This
 	  DMA engine is found on OMAP and DRA7xx parts.
 
+config TI_K3_PSIL
+	bool
+
 config TI_DMA_CROSSBAR
 	bool
diff --git a/drivers/dma/ti/Makefile b/drivers/dma/ti/Makefile
index 113e59ec9c32..f8d912ad7eaf 100644
--- a/drivers/dma/ti/Makefile
+++ b/drivers/dma/ti/Makefile
@@ -2,4 +2,5 @@
 obj-$(CONFIG_TI_CPPI41) += cppi41.o
 obj-$(CONFIG_TI_EDMA) += edma.o
 obj-$(CONFIG_DMA_OMAP) += omap-dma.o
+obj-$(CONFIG_TI_K3_PSIL) += k3-psil.o k3-psil-am654.o k3-psil-j721e.o
 obj-$(CONFIG_TI_DMA_CROSSBAR) += dma-crossbar.o
diff --git a/drivers/dma/ti/k3-psil-am654.c b/drivers/dma/ti/k3-psil-am654.c
new file mode 100644
index 000000000000..7da9242b6114
--- /dev/null
+++ b/drivers/dma/ti/k3-psil-am654.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ *  Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ */
+
+#include <linux/kernel.h>
+
+#include "k3-psil-priv.h"
+
+#define PSIL_PDMA_XY_TR(x)				\
+	{						\
+		.thread_id = x,				\
+		.ep_config = {				\
+			.ep_type = PSIL_EP_PDMA_XY,	\
+		},					\
+	}
+
+#define PSIL_PDMA_XY_PKT(x)				\
+	{						\
+		.thread_id = x,				\
+		.ep_config = {				\
+			.ep_type = PSIL_EP_PDMA_XY,	\
+			.pkt_mode = 1,			\
+		},					\
+	}
+
+#define PSIL_ETHERNET(x)				\
+	{						\
+		.thread_id = x,				\
+		.ep_config = {				\
+			.ep_type = PSIL_EP_NATIVE,	\
+			.pkt_mode = 1,			\
+			.needs_epib = 1,		\
+			.psd_size = 16,			\
+		},					\
+	}
+
+#define PSIL_SA2UL(x, tx)				\
+	{						\
+		.thread_id = x,				\
+		.ep_config = {				\
+			.ep_type = PSIL_EP_NATIVE,	\
+			.pkt_mode = 1,			\
+			.needs_epib = 1,		\
+			.psd_size = 64,			\
+			.notdpkt = tx,			\
+		},					\
+	}
+
+/* PSI-L source thread IDs, used for RX (DMA_DEV_TO_MEM) */
+struct psil_ep am654_src_ep_map[] = {
+	/* SA2UL */
+	PSIL_SA2UL(0x4000, 0),
+	PSIL_SA2UL(0x4001, 0),
+	PSIL_SA2UL(0x4002, 0),
+	PSIL_SA2UL(0x4003, 0),
+	/* PRU_ICSSG0 */
+	PSIL_ETHERNET(0x4100),
+	PSIL_ETHERNET(0x4101),
+	PSIL_ETHERNET(0x4102),
+	PSIL_ETHERNET(0x4103),
+	/* PRU_ICSSG1 */
+	PSIL_ETHERNET(0x4200),
+	PSIL_ETHERNET(0x4201),
+	PSIL_ETHERNET(0x4202),
+	PSIL_ETHERNET(0x4203),
+	/* PRU_ICSSG2 */
+	PSIL_ETHERNET(0x4300),
+	PSIL_ETHERNET(0x4301),
+	PSIL_ETHERNET(0x4302),
+	PSIL_ETHERNET(0x4303),
+	/* PDMA0 - McASPs */
+	PSIL_PDMA_XY_TR(0x4400),
+	PSIL_PDMA_XY_TR(0x4401),
+	PSIL_PDMA_XY_TR(0x4402),
+	/* PDMA1 - SPI0-4 */
+	PSIL_PDMA_XY_PKT(0x4500),
+	PSIL_PDMA_XY_PKT(0x4501),
+	PSIL_PDMA_XY_PKT(0x4502),
+	PSIL_PDMA_XY_PKT(0x4503),
+	PSIL_PDMA_XY_PKT(0x4504),
+	PSIL_PDMA_XY_PKT(0x4505),
+	PSIL_PDMA_XY_PKT(0x4506),
+	PSIL_PDMA_XY_PKT(0x4507),
+	PSIL_PDMA_XY_PKT(0x4508),
+	PSIL_PDMA_XY_PKT(0x4509),
+	PSIL_PDMA_XY_PKT(0x450a),
+	PSIL_PDMA_XY_PKT(0x450b),
+	PSIL_PDMA_XY_PKT(0x450c),
+	PSIL_PDMA_XY_PKT(0x450d),
+	PSIL_PDMA_XY_PKT(0x450e),
+	PSIL_PDMA_XY_PKT(0x450f),
+	PSIL_PDMA_XY_PKT(0x4510),
+	PSIL_PDMA_XY_PKT(0x4511),
+	PSIL_PDMA_XY_PKT(0x4512),
+	PSIL_PDMA_XY_PKT(0x4513),
+	/* PDMA1 - USART0-2 */
+	PSIL_PDMA_XY_PKT(0x4514),
+	PSIL_PDMA_XY_PKT(0x4515),
+	PSIL_PDMA_XY_PKT(0x4516),
+	/* CPSW0 */
+	PSIL_ETHERNET(0x7000),
+	/* MCU_PDMA0 - ADCs */
+	PSIL_PDMA_XY_TR(0x7100),
+	PSIL_PDMA_XY_TR(0x7101),
+	PSIL_PDMA_XY_TR(0x7102),
+	PSIL_PDMA_XY_TR(0x7103),
+	/* MCU_PDMA1 - MCU_SPI0-2 */
+	PSIL_PDMA_XY_PKT(0x7200),
+	PSIL_PDMA_XY_PKT(0x7201),
+	PSIL_PDMA_XY_PKT(0x7202),
+	PSIL_PDMA_XY_PKT(0x7203),
+	PSIL_PDMA_XY_PKT(0x7204),
+	PSIL_PDMA_XY_PKT(0x7205),
+	PSIL_PDMA_XY_PKT(0x7206),
+	PSIL_PDMA_XY_PKT(0x7207),
+	PSIL_PDMA_XY_PKT(0x7208),
+	PSIL_PDMA_XY_PKT(0x7209),
+	PSIL_PDMA_XY_PKT(0x720a),
+	PSIL_PDMA_XY_PKT(0x720b),
+	/* MCU_PDMA1 - MCU_USART0 */
+	PSIL_PDMA_XY_PKT(0x7212),
+};
+
+/* PSI-L destination thread IDs, used for TX (DMA_MEM_TO_DEV) */
+struct psil_ep am654_dst_ep_map[] = {
+	/* SA2UL */
+	PSIL_SA2UL(0xc000, 1),
+	PSIL_SA2UL(0xc001, 1),
+	/* PRU_ICSSG0 */
+	PSIL_ETHERNET(0xc100),
+	PSIL_ETHERNET(0xc101),
+	PSIL_ETHERNET(0xc102),
+	PSIL_ETHERNET(0xc103),
+	PSIL_ETHERNET(0xc104),
+	PSIL_ETHERNET(0xc105),
+	PSIL_ETHERNET(0xc106),
+	PSIL_ETHERNET(0xc107),
+	/* PRU_ICSSG1 */
+	PSIL_ETHERNET(0xc200),
+	PSIL_ETHERNET(0xc201),
+	PSIL_ETHERNET(0xc202),
+	PSIL_ETHERNET(0xc203),
+	PSIL_ETHERNET(0xc204),
+	PSIL_ETHERNET(0xc205),
+	PSIL_ETHERNET(0xc206),
+	PSIL_ETHERNET(0xc207),
+	/* PRU_ICSSG2 */
+	PSIL_ETHERNET(0xc300),
+	PSIL_ETHERNET(0xc301),
+	PSIL_ETHERNET(0xc302),
+	PSIL_ETHERNET(0xc303),
+	PSIL_ETHERNET(0xc304),
+	PSIL_ETHERNET(0xc305),
+	PSIL_ETHERNET(0xc306),
+	PSIL_ETHERNET(0xc307),
+	/* CPSW0 */
+	PSIL_ETHERNET(0xf000),
+	PSIL_ETHERNET(0xf001),
+	PSIL_ETHERNET(0xf002),
+	PSIL_ETHERNET(0xf003),
+	PSIL_ETHERNET(0xf004),
+	PSIL_ETHERNET(0xf005),
+	PSIL_ETHERNET(0xf006),
+	PSIL_ETHERNET(0xf007),
+};
+
+struct psil_ep_map am654_ep_map = {
+	.name = "am654",
+	.src = am654_src_ep_map,
+	.src_count = ARRAY_SIZE(am654_src_ep_map),
+	.dst = am654_dst_ep_map,
+	.dst_count = ARRAY_SIZE(am654_dst_ep_map),
+};
diff --git a/drivers/dma/ti/k3-psil-j721e.c b/drivers/dma/ti/k3-psil-j721e.c
new file mode 100644
index 000000000000..a609d496fddd
--- /dev/null
+++ b/drivers/dma/ti/k3-psil-j721e.c
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ *  Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ */
+
+#include <linux/kernel.h>
+
+#include "k3-psil-priv.h"
+
+#define PSIL_PDMA_XY_TR(x)				\
+	{						\
+		.thread_id = x,				\
+		.ep_config = {				\
+			.ep_type = PSIL_EP_PDMA_XY,	\
+		},					\
+	}
+
+#define PSIL_PDMA_XY_PKT(x)				\
+	{						\
+		.thread_id = x,				\
+		.ep_config = {				\
+			.ep_type = PSIL_EP_PDMA_XY,	\
+			.pkt_mode = 1,			\
+		},					\
+	}
+
+#define PSIL_PDMA_MCASP(x)				\
+	{						\
+		.thread_id = x,				\
+		.ep_config = {				\
+			.ep_type = PSIL_EP_PDMA_XY,	\
+			.pdma_acc32 = 1,		\
+			.pdma_burst = 1,		\
+		},					\
+	}
+
+#define PSIL_ETHERNET(x)				\
+	{						\
+		.thread_id = x,				\
+		.ep_config = {				\
+			.ep_type = PSIL_EP_NATIVE,	\
+			.pkt_mode = 1,			\
+			.needs_epib = 1,		\
+			.psd_size = 16,			\
+		},					\
+	}
+
+#define PSIL_SA2UL(x, tx)				\
+	{						\
+		.thread_id = x,				\
+		.ep_config = {				\
+			.ep_type = PSIL_EP_NATIVE,	\
+			.pkt_mode = 1,			\
+			.needs_epib = 1,		\
+			.psd_size = 64,			\
+			.notdpkt = tx,			\
+		},					\
+	}
+
+/* PSI-L source thread IDs, used for RX (DMA_DEV_TO_MEM) */
+struct psil_ep j721e_src_ep_map[] = {
+	/* SA2UL */
+	PSIL_SA2UL(0x4000, 0),
+	PSIL_SA2UL(0x4001, 0),
+	PSIL_SA2UL(0x4002, 0),
+	PSIL_SA2UL(0x4003, 0),
+	/* PRU_ICSSG0 */
+	PSIL_ETHERNET(0x4100),
+	PSIL_ETHERNET(0x4101),
+	PSIL_ETHERNET(0x4102),
+	PSIL_ETHERNET(0x4103),
+	/* PRU_ICSSG1 */
+	PSIL_ETHERNET(0x4200),
+	PSIL_ETHERNET(0x4201),
+	PSIL_ETHERNET(0x4202),
+	PSIL_ETHERNET(0x4203),
+	/* PDMA6 (PSIL_PDMA_MCASP_G0) - McASP0-2 */
+	PSIL_PDMA_MCASP(0x4400),
+	PSIL_PDMA_MCASP(0x4401),
+	PSIL_PDMA_MCASP(0x4402),
+	/* PDMA7 (PSIL_PDMA_MCASP_G1) - McASP3-11 */
+	PSIL_PDMA_MCASP(0x4500),
+	PSIL_PDMA_MCASP(0x4501),
+	PSIL_PDMA_MCASP(0x4502),
+	PSIL_PDMA_MCASP(0x4503),
+	PSIL_PDMA_MCASP(0x4504),
+	PSIL_PDMA_MCASP(0x4505),
+	PSIL_PDMA_MCASP(0x4506),
+	PSIL_PDMA_MCASP(0x4507),
+	PSIL_PDMA_MCASP(0x4508),
+	/* PDMA8 (PDMA_MISC_G0) - SPI0-1 */
+	PSIL_PDMA_XY_PKT(0x4600),
+	PSIL_PDMA_XY_PKT(0x4601),
+	PSIL_PDMA_XY_PKT(0x4602),
+	PSIL_PDMA_XY_PKT(0x4603),
+	PSIL_PDMA_XY_PKT(0x4604),
+	PSIL_PDMA_XY_PKT(0x4605),
+	PSIL_PDMA_XY_PKT(0x4606),
+	PSIL_PDMA_XY_PKT(0x4607),
+	/* PDMA9 (PDMA_MISC_G1) - SPI2-3 */
+	PSIL_PDMA_XY_PKT(0x460c),
+	PSIL_PDMA_XY_PKT(0x460d),
+	PSIL_PDMA_XY_PKT(0x460e),
+	PSIL_PDMA_XY_PKT(0x460f),
+	PSIL_PDMA_XY_PKT(0x4610),
+	PSIL_PDMA_XY_PKT(0x4611),
+	PSIL_PDMA_XY_PKT(0x4612),
+	PSIL_PDMA_XY_PKT(0x4613),
+	/* PDMA10 (PDMA_MISC_G2) - SPI4-5 */
+	PSIL_PDMA_XY_PKT(0x4618),
+	PSIL_PDMA_XY_PKT(0x4619),
+	PSIL_PDMA_XY_PKT(0x461a),
+	PSIL_PDMA_XY_PKT(0x461b),
+	PSIL_PDMA_XY_PKT(0x461c),
+	PSIL_PDMA_XY_PKT(0x461d),
+	PSIL_PDMA_XY_PKT(0x461e),
+	PSIL_PDMA_XY_PKT(0x461f),
+	/* PDMA11 (PDMA_MISC_G3) */
+	PSIL_PDMA_XY_PKT(0x4624),
+	PSIL_PDMA_XY_PKT(0x4625),
+	PSIL_PDMA_XY_PKT(0x4626),
+	PSIL_PDMA_XY_PKT(0x4627),
+	PSIL_PDMA_XY_PKT(0x4628),
+	PSIL_PDMA_XY_PKT(0x4629),
+	PSIL_PDMA_XY_PKT(0x4630),
+	PSIL_PDMA_XY_PKT(0x463a),
+	/* PDMA13 (PDMA_USART_G0) - UART0-1 */
+	PSIL_PDMA_XY_PKT(0x4700),
+	PSIL_PDMA_XY_PKT(0x4701),
+	/* PDMA14 (PDMA_USART_G1) - UART2-3 */
+	PSIL_PDMA_XY_PKT(0x4702),
+	PSIL_PDMA_XY_PKT(0x4703),
+	/* PDMA15 (PDMA_USART_G2) - UART4-9 */
+	PSIL_PDMA_XY_PKT(0x4704),
+	PSIL_PDMA_XY_PKT(0x4705),
+	PSIL_PDMA_XY_PKT(0x4706),
+	PSIL_PDMA_XY_PKT(0x4707),
+	PSIL_PDMA_XY_PKT(0x4708),
+	PSIL_PDMA_XY_PKT(0x4709),
+	/* CPSW9 */
+	PSIL_ETHERNET(0x4a00),
+	/* CPSW0 */
+	PSIL_ETHERNET(0x7000),
+	/* MCU_PDMA0 (MCU_PDMA_MISC_G0) - SPI0 */
+	PSIL_PDMA_XY_PKT(0x7100),
+	PSIL_PDMA_XY_PKT(0x7101),
+	PSIL_PDMA_XY_PKT(0x7102),
+	PSIL_PDMA_XY_PKT(0x7103),
+	/* MCU_PDMA1 (MCU_PDMA_MISC_G1) - SPI1-2 */
+	PSIL_PDMA_XY_PKT(0x7200),
+	PSIL_PDMA_XY_PKT(0x7201),
+	PSIL_PDMA_XY_PKT(0x7202),
+	PSIL_PDMA_XY_PKT(0x7203),
+	PSIL_PDMA_XY_PKT(0x7204),
+	PSIL_PDMA_XY_PKT(0x7205),
+	PSIL_PDMA_XY_PKT(0x7206),
+	PSIL_PDMA_XY_PKT(0x7207),
+	/* MCU_PDMA2 (MCU_PDMA_MISC_G2) - UART0 */
+	PSIL_PDMA_XY_PKT(0x7300),
+	/* MCU_PDMA_ADC - ADC0-1 */
+	PSIL_PDMA_XY_TR(0x7400),
+	PSIL_PDMA_XY_TR(0x7401),
+	PSIL_PDMA_XY_TR(0x7402),
+	PSIL_PDMA_XY_TR(0x7403),
+	/* SA2UL */
+	PSIL_SA2UL(0x7500, 0),
+	PSIL_SA2UL(0x7501, 0),
+};
+
+/* PSI-L destination thread IDs, used for TX (DMA_MEM_TO_DEV) */
+struct psil_ep j721e_dst_ep_map[] = {
+	/* SA2UL */
+	PSIL_SA2UL(0xc000, 1),
+	PSIL_SA2UL(0xc001, 1),
+	/* PRU_ICSSG0 */
+	PSIL_ETHERNET(0xc100),
+	PSIL_ETHERNET(0xc101),
+	PSIL_ETHERNET(0xc102),
+	PSIL_ETHERNET(0xc103),
+	PSIL_ETHERNET(0xc104),
+	PSIL_ETHERNET(0xc105),
+	PSIL_ETHERNET(0xc106),
+	PSIL_ETHERNET(0xc107),
+	/* PRU_ICSSG1 */
+	PSIL_ETHERNET(0xc200),
+	PSIL_ETHERNET(0xc201),
+	PSIL_ETHERNET(0xc202),
+	PSIL_ETHERNET(0xc203),
+	PSIL_ETHERNET(0xc204),
+	PSIL_ETHERNET(0xc205),
+	PSIL_ETHERNET(0xc206),
+	PSIL_ETHERNET(0xc207),
+	/* CPSW9 */
+	PSIL_ETHERNET(0xca00),
+	PSIL_ETHERNET(0xca01),
+	PSIL_ETHERNET(0xca02),
+	PSIL_ETHERNET(0xca03),
+	PSIL_ETHERNET(0xca04),
+	PSIL_ETHERNET(0xca05),
+	PSIL_ETHERNET(0xca06),
+	PSIL_ETHERNET(0xca07),
+	/* CPSW0 */
+	PSIL_ETHERNET(0xf000),
+	PSIL_ETHERNET(0xf001),
+	PSIL_ETHERNET(0xf002),
+	PSIL_ETHERNET(0xf003),
+	PSIL_ETHERNET(0xf004),
+	PSIL_ETHERNET(0xf005),
+	PSIL_ETHERNET(0xf006),
+	PSIL_ETHERNET(0xf007),
+	/* SA2UL */
+	PSIL_SA2UL(0xf500, 1),
+};
+
+struct psil_ep_map j721e_ep_map = {
+	.name = "j721e",
+	.src = j721e_src_ep_map,
+	.src_count = ARRAY_SIZE(j721e_src_ep_map),
+	.dst = j721e_dst_ep_map,
+	.dst_count = ARRAY_SIZE(j721e_dst_ep_map),
+};
diff --git a/drivers/dma/ti/k3-psil-priv.h b/drivers/dma/ti/k3-psil-priv.h
new file mode 100644
index 000000000000..f74420653d8a
--- /dev/null
+++ b/drivers/dma/ti/k3-psil-priv.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ */
+
+#ifndef K3_PSIL_PRIV_H_
+#define K3_PSIL_PRIV_H_
+
+#include <linux/dma/k3-psil.h>
+
+struct psil_ep {
+	u32 thread_id;
+	struct psil_endpoint_config ep_config;
+};
+
+/**
+ * struct psil_ep_map - PSI-L thread ID configuration maps
+ * @name:	Name of the map, set it to the name of the SoC
+ * @src:	Array of source PSI-L thread configurations
+ * @src_count:	Number of entries in the src array
+ * @dst:	Array of destination PSI-L thread configurations
+ * @dst_count:	Number of entries in the dst array
+ *
+ * In case of symmetric configuration for a matching src/dst thread (for example
+ * 0x4400 and 0xc400) only the src configuration can be present. If no dst
+ * configuration found the code will look for (dst_thread_id & ~0x8000) to find
+ * the symmetric match.
+ */
+struct psil_ep_map {
+	char *name;
+	struct psil_ep	*src;
+	int src_count;
+	struct psil_ep	*dst;
+	int dst_count;
+};
+
+struct psil_endpoint_config *psil_get_ep_config(u32 thread_id);
+
+#endif /* K3_PSIL_PRIV_H_ */
diff --git a/drivers/dma/ti/k3-psil.c b/drivers/dma/ti/k3-psil.c
new file mode 100644
index 000000000000..9314cf9a52e4
--- /dev/null
+++ b/drivers/dma/ti/k3-psil.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ *  Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+
+#include "k3-psil-priv.h"
+
+extern struct psil_ep_map am654_ep_map;
+extern struct psil_ep_map j721e_ep_map;
+
+static DEFINE_MUTEX(ep_map_mutex);
+static struct psil_ep_map *soc_ep_map;
+
+struct psil_endpoint_config *psil_get_ep_config(u32 thread_id)
+{
+	int i;
+
+	mutex_lock(&ep_map_mutex);
+	if (!soc_ep_map) {
+		if (of_machine_is_compatible("ti,am654")) {
+			soc_ep_map = &am654_ep_map;
+		} else if (of_machine_is_compatible("ti,j721e")) {
+			soc_ep_map = &j721e_ep_map;
+		} else {
+			pr_err("PSIL: No compatible machine found for map\n");
+			return ERR_PTR(-ENOTSUPP);
+		}
+		pr_debug("%s: Using map for %s\n", __func__, soc_ep_map->name);
+	}
+	mutex_unlock(&ep_map_mutex);
+
+	if (thread_id & K3_PSIL_DST_THREAD_ID_OFFSET && soc_ep_map->dst) {
+		/* check in destination thread map */
+		for (i = 0; i < soc_ep_map->dst_count; i++) {
+			if (soc_ep_map->dst[i].thread_id == thread_id)
+				return &soc_ep_map->dst[i].ep_config;
+		}
+	}
+
+	thread_id &= ~K3_PSIL_DST_THREAD_ID_OFFSET;
+	if (soc_ep_map->src) {
+		for (i = 0; i < soc_ep_map->src_count; i++) {
+			if (soc_ep_map->src[i].thread_id == thread_id)
+				return &soc_ep_map->src[i].ep_config;
+		}
+	}
+
+	return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL_GPL(psil_get_ep_config);
+
+int psil_set_new_ep_config(struct device *dev, const char *name,
+			   struct psil_endpoint_config *ep_config)
+{
+	struct psil_endpoint_config *dst_ep_config;
+	struct of_phandle_args dma_spec;
+	u32 thread_id;
+	int index;
+
+	if (!dev || !dev->of_node)
+		return -EINVAL;
+
+	index = of_property_match_string(dev->of_node, "dma-names", name);
+	if (index < 0)
+		return index;
+
+	if (of_parse_phandle_with_args(dev->of_node, "dmas", "#dma-cells",
+				       index, &dma_spec))
+		return -ENOENT;
+
+	thread_id = dma_spec.args[0];
+
+	dst_ep_config = psil_get_ep_config(thread_id);
+	if (IS_ERR(dst_ep_config)) {
+		pr_err("PSIL: thread ID 0x%04x not defined in map\n",
+		       thread_id);
+		of_node_put(dma_spec.np);
+		return PTR_ERR(dst_ep_config);
+	}
+
+	memcpy(dst_ep_config, ep_config, sizeof(*dst_ep_config));
+
+	of_node_put(dma_spec.np);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(psil_set_new_ep_config);
diff --git a/include/linux/dma/k3-psil.h b/include/linux/dma/k3-psil.h
new file mode 100644
index 000000000000..61d5cc0ad601
--- /dev/null
+++ b/include/linux/dma/k3-psil.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ */
+
+#ifndef K3_PSIL_H_
+#define K3_PSIL_H_
+
+#include <linux/types.h>
+
+#define K3_PSIL_DST_THREAD_ID_OFFSET 0x8000
+
+struct device;
+
+/**
+ * enum udma_tp_level - Channel Throughput Levels
+ * @UDMA_TP_NORMAL:	Normal channel
+ * @UDMA_TP_HIGH:	High Throughput channel
+ * @UDMA_TP_ULTRAHIGH:	Ultra High Throughput channel
+ */
+enum udma_tp_level {
+	UDMA_TP_NORMAL = 0,
+	UDMA_TP_HIGH,
+	UDMA_TP_ULTRAHIGH,
+	UDMA_TP_LAST,
+};
+
+/**
+ * enum psil_endpoint_type - PSI-L Endpoint type
+ * @PSIL_EP_NATIVE:	Normal channel
+ * @PSIL_EP_PDMA_XY:	XY mode PDMA
+ * @PSIL_EP_PDMA_MCAN:	MCAN mode PDMA
+ * @PSIL_EP_PDMA_AASRC: AASRC mode PDMA
+ */
+enum psil_endpoint_type {
+	PSIL_EP_NATIVE = 0,
+	PSIL_EP_PDMA_XY,
+	PSIL_EP_PDMA_MCAN,
+	PSIL_EP_PDMA_AASRC,
+};
+
+/**
+ * struct psil_endpoint_config - PSI-L Endpoint configuration
+ * @ep_type:		PSI-L endpoint type
+ * @pkt_mode:		If set, the channel must be in Packet mode, otherwise in
+ *			TR mode
+ * @notdpkt:		TDCM must be suppressed on the TX channel
+ * @needs_epib:		Endpoint needs EPIB
+ * @psd_size:		If set, PSdata is used by the endpoint
+ * @channel_tpl:	Desired throughput level for the channel
+ * @pdma_acc32:		ACC32 must be enabled on the PDMA side
+ * @pdma_burst:		BURST must be enabled on the PDMA side
+ */
+struct psil_endpoint_config {
+	enum psil_endpoint_type ep_type;
+
+	unsigned pkt_mode:1;
+	unsigned notdpkt:1;
+	unsigned needs_epib:1;
+	u32 psd_size;
+	enum udma_tp_level channel_tpl;
+
+	/* PDMA properties, valid for PSIL_EP_PDMA_* */
+	unsigned pdma_acc32:1;
+	unsigned pdma_burst:1;
+};
+
+int psil_set_new_ep_config(struct device *dev, const char *name,
+			   struct psil_endpoint_config *ep_config);
+
+#endif /* K3_PSIL_H_ */
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-23 11:04 [PATCH v8 00/18] dmaengine/soc: Add Texas Instruments UDMA support Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 01/18] bindings: soc: ti: add documentation for k3 ringacc Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 02/18] soc: ti: k3: add navss ringacc driver Peter Ujfalusi
2019-12-23 11:38   ` Peter Ujfalusi
2020-01-13 21:28     ` santosh.shilimkar
2020-01-14  6:58       ` Peter Ujfalusi
2020-01-14  8:11         ` Sekhar Nori
2020-01-14 18:06           ` santosh.shilimkar
2020-01-15  9:44             ` Peter Ujfalusi
2020-01-15 12:24               ` Vinod Koul
2020-01-15 18:26                 ` santosh.shilimkar
2019-12-23 11:04 ` [PATCH v8 03/18] dmaengine: doc: Add sections for per descriptor metadata support Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 04/18] dmaengine: Add metadata_ops for dma_async_tx_descriptor Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 05/18] dmaengine: Add support for reporting DMA cached data amount Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 06/18] dmaengine: Add helper function to convert direction value to text Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 07/18] dmaengine: ti: Add cppi5 header for K3 NAVSS/UDMA Peter Ujfalusi
2019-12-23 11:04 ` Peter Ujfalusi [this message]
2019-12-23 11:04 ` [PATCH v8 09/18] dt-bindings: dma: ti: Add document for K3 UDMA Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 10/18] dmaengine: ti: New driver " Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 11/18] dmaengine: ti: k3-udma: Add glue layer for non DMAengine users Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 12/18] firmware: ti_sci: rm: Add support for tx_tdtype parameter for tx channel Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 13/18] dmaengine: ti: k3-udma: Wait for peer teardown completion if supported Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 14/18] of: irq: Export of_msi_get_domain Peter Ujfalusi
2019-12-23 11:36   ` Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 15/18] firmware: ti_sci: Export devm_ti_sci_get_of_resource for modules Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 16/18] dmaengine: ti: k3-udma: Allow the driver to be built as module Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 17/18] dmaengine: ti: k3-udma-glue: " Peter Ujfalusi
2019-12-23 11:04 ` [PATCH v8 18/18] soc: ti: k3-ringacc: " Peter Ujfalusi
2020-01-21  7:41 ` [PATCH v8 00/18] dmaengine/soc: Add Texas Instruments UDMA support Vinod Koul

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191223110458.30766-9-peter.ujfalusi@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=dan.j.williams@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=frowand.list@gmail.com \
    --cc=grygorii.strashko@ti.com \
    --cc=j-keerthy@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=ssantosh@kernel.org \
    --cc=t-kristo@ti.com \
    --cc=tony@atomide.com \
    --cc=vigneshr@ti.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git