linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Kishon Vijay Abraham I <kishon@ti.com>,
	Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Maxime Ripard <mripard@kernel.org>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH v2 2/2] phy: Enable compile testing for some of drivers
Date: Fri,  3 Jan 2020 17:47:10 +0100	[thread overview]
Message-ID: <20200103164710.4829-2-krzk@kernel.org> (raw)
In-Reply-To: <20200103164710.4829-1-krzk@kernel.org>

Some of the phy drivers can be compile tested to increase build
coverage.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Changes since v1:
1. Add COMPILE_TEST to two Broadcom drivers.
---
 drivers/phy/allwinner/Kconfig | 3 ++-
 drivers/phy/broadcom/Kconfig  | 4 ++--
 drivers/phy/marvell/Kconfig   | 8 +++++---
 drivers/phy/mediatek/Kconfig  | 9 ++++++---
 drivers/phy/samsung/Kconfig   | 8 ++++----
 drivers/phy/ti/Kconfig        | 4 ++--
 6 files changed, 21 insertions(+), 15 deletions(-)

diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig
index 3dab79e9d52b..e760d89d3976 100644
--- a/drivers/phy/allwinner/Kconfig
+++ b/drivers/phy/allwinner/Kconfig
@@ -48,7 +48,8 @@ config PHY_SUN9I_USB
 
 config PHY_SUN50I_USB3
 	tristate "Allwinner H6 SoC USB3 PHY driver"
-	depends on ARCH_SUNXI && HAS_IOMEM && OF
+	depends on ARCH_SUNXI || COMPILE_TEST
+	depends on HAS_IOMEM && OF
 	depends on RESET_CONTROLLER
 	select GENERIC_PHY
 	help
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index d3d983c128ea..b29f11c19155 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -50,7 +50,7 @@ config PHY_BCM_NS_USB3
 
 config PHY_NS2_PCIE
 	tristate "Broadcom Northstar2 PCIe PHY driver"
-	depends on OF && MDIO_BUS_MUX_BCM_IPROC
+	depends on (OF && MDIO_BUS_MUX_BCM_IPROC) || (COMPILE_TEST && MDIO_BUS)
 	select GENERIC_PHY
 	default ARCH_BCM_IPROC
 	help
@@ -83,7 +83,7 @@ config PHY_BRCM_SATA
 
 config PHY_BRCM_USB
 	tristate "Broadcom STB USB PHY driver"
-	depends on ARCH_BRCMSTB
+	depends on ARCH_BRCMSTB || COMPILE_TEST
 	depends on OF
 	select GENERIC_PHY
 	select SOC_BRCMSTB
diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
index 005e02dd4a91..8f6273c837ec 100644
--- a/drivers/phy/marvell/Kconfig
+++ b/drivers/phy/marvell/Kconfig
@@ -10,14 +10,16 @@ config ARMADA375_USBCLUSTER_PHY
 
 config PHY_BERLIN_SATA
 	tristate "Marvell Berlin SATA PHY driver"
-	depends on ARCH_BERLIN && HAS_IOMEM && OF
+	depends on ARCH_BERLIN || COMPILE_TEST
+	depends on OF && HAS_IOMEM
 	select GENERIC_PHY
 	help
 	  Enable this to support the SATA PHY on Marvell Berlin SoCs.
 
 config PHY_BERLIN_USB
 	tristate "Marvell Berlin USB PHY Driver"
-	depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
+	depends on ARCH_BERLIN || COMPILE_TEST
+	depends on OF && HAS_IOMEM && RESET_CONTROLLER
 	select GENERIC_PHY
 	help
 	  Enable this to support the USB PHY on Marvell Berlin SoCs.
@@ -95,7 +97,7 @@ config PHY_PXA_28NM_USB2
 
 config PHY_PXA_USB
 	tristate "Marvell PXA USB PHY Driver"
-	depends on ARCH_PXA || ARCH_MMP
+	depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
 	select GENERIC_PHY
 	help
 	  Enable this to support Marvell PXA USB PHY driver for Marvell
diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
index 7d19134c6b7c..dee757c957f2 100644
--- a/drivers/phy/mediatek/Kconfig
+++ b/drivers/phy/mediatek/Kconfig
@@ -4,7 +4,8 @@
 #
 config PHY_MTK_TPHY
 	tristate "MediaTek T-PHY Driver"
-	depends on ARCH_MEDIATEK && OF
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
 	select GENERIC_PHY
 	help
 	  Say 'Y' here to add support for MediaTek T-PHY driver,
@@ -16,7 +17,8 @@ config PHY_MTK_TPHY
 
 config PHY_MTK_UFS
 	tristate "MediaTek UFS M-PHY driver"
-	depends on ARCH_MEDIATEK && OF
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
 	select GENERIC_PHY
 	help
 	  Support for UFS M-PHY on MediaTek chipsets.
@@ -26,7 +28,8 @@ config PHY_MTK_UFS
 
 config PHY_MTK_XSPHY
 	tristate "MediaTek XS-PHY Driver"
-	depends on ARCH_MEDIATEK && OF
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
 	select GENERIC_PHY
 	help
 	  Enable this to support the SuperSpeedPlus XS-PHY transceiver for
diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
index 290a6c70f570..349fcb23e5f3 100644
--- a/drivers/phy/samsung/Kconfig
+++ b/drivers/phy/samsung/Kconfig
@@ -32,7 +32,7 @@ config PHY_EXYNOS_PCIE
 config PHY_SAMSUNG_USB2
 	tristate "Samsung USB 2.0 PHY driver"
 	depends on HAS_IOMEM
-	depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
+	depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 || COMPILE_TEST
 	select GENERIC_PHY
 	select MFD_SYSCON
 	default ARCH_EXYNOS
@@ -60,7 +60,7 @@ config PHY_EXYNOS5250_USB2
 config PHY_S5PV210_USB2
 	bool "Support for S5PV210"
 	depends on PHY_SAMSUNG_USB2
-	depends on ARCH_S5PV210
+	depends on ARCH_S5PV210 || COMPILE_TEST
 	help
 	  Enable USB PHY support for S5PV210. This option requires that Samsung
 	  USB 2.0 PHY driver is enabled and means that support for this
@@ -69,7 +69,7 @@ config PHY_S5PV210_USB2
 
 config PHY_EXYNOS5_USBDRD
 	tristate "Exynos5 SoC series USB DRD PHY driver"
-	depends on ARCH_EXYNOS && OF
+	depends on (ARCH_EXYNOS && OF) || COMPILE_TEST
 	depends on HAS_IOMEM
 	depends on USB_DWC3_EXYNOS
 	select GENERIC_PHY
@@ -82,7 +82,7 @@ config PHY_EXYNOS5_USBDRD
 
 config PHY_EXYNOS5250_SATA
 	tristate "Exynos5250 Sata SerDes/PHY driver"
-	depends on SOC_EXYNOS5250
+	depends on SOC_EXYNOS5250 || COMPILE_TEST
 	depends on HAS_IOMEM
 	depends on OF
 	select GENERIC_PHY
diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
index 174888609779..e231c0e369c5 100644
--- a/drivers/phy/ti/Kconfig
+++ b/drivers/phy/ti/Kconfig
@@ -4,7 +4,7 @@
 #
 config PHY_DA8XX_USB
 	tristate "TI DA8xx USB PHY Driver"
-	depends on ARCH_DAVINCI_DA8XX
+	depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
 	select GENERIC_PHY
 	select MFD_SYSCON
 	help
@@ -14,7 +14,7 @@ config PHY_DA8XX_USB
 
 config PHY_DM816X_USB
 	tristate "TI dm816x USB PHY driver"
-	depends on ARCH_OMAP2PLUS
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 	depends on USB_SUPPORT
 	select GENERIC_PHY
 	select USB_PHY
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-01-03 16:47 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-03 16:47 [PATCH v2 1/2] phy: mediatek: Fix Kconfig indentation Krzysztof Kozlowski
2020-01-03 16:47 ` Krzysztof Kozlowski [this message]
2020-01-03 17:20   ` [PATCH v2 2/2] phy: Enable compile testing for some of drivers Florian Fainelli
2020-01-06  9:35   ` Greg KH
2020-01-06  2:10 ` [PATCH v2 1/2] phy: mediatek: Fix Kconfig indentation Chunfeng Yun
2020-01-06  2:25   ` Stanley Chu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200103164710.4829-2-krzk@kernel.org \
    --to=krzk@kernel.org \
    --cc=chunfeng.yun@mediatek.com \
    --cc=f.fainelli@gmail.com \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=mripard@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).