Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL
@ 2020-01-16 17:33 Sasha Levin
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 043/251] ASoC: imx-sgtl5000: put of nodes if finding codec fails Sasha Levin
                   ` (32 more replies)
  0 siblings, 33 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:33 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Mauro Carvalho Chehab, Jacek Anaszewski,
	Sylwester Nawrocki, Hans Verkuil, linux-media, linux-arm-kernel,
	Pawe? Chmiel

From: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>

[ Upstream commit 19c624c6b29e244c418f8b44a711cbf5e82e3cd4 ]

This commit corrects max and step values for v4l2 control for
V4L2_CID_JPEG_RESTART_INTERVAL. Max should be 0xffff and step should be 1.
It was found by using v4l2-compliance tool and checking result of
VIDIOC_QUERY_EXT_CTRL/QUERYMENU test.
Previously it was complaining that step was bigger than difference
between max and min.

Fixes: 15f4bc3b1f42 ("[media] s5p-jpeg: Add JPEG controls support")

Signed-off-by: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/s5p-jpeg/jpeg-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
index c89922fb42ce..a63f4eec366e 100644
--- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
+++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
@@ -1963,7 +1963,7 @@ static int s5p_jpeg_controls_create(struct s5p_jpeg_ctx *ctx)
 
 		v4l2_ctrl_new_std(&ctx->ctrl_handler, &s5p_jpeg_ctrl_ops,
 				  V4L2_CID_JPEG_RESTART_INTERVAL,
-				  0, 3, 0xffff, 0);
+				  0, 0xffff, 1, 0);
 		if (ctx->jpeg->variant->version == SJPEG_S5P)
 			mask = ~0x06; /* 422, 420 */
 	}
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 043/251] ASoC: imx-sgtl5000: put of nodes if finding codec fails
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
@ 2020-01-16 17:33 ` Sasha Levin
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 046/251] clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it Sasha Levin
                   ` (31 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:33 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, alsa-devel, Daniel Baluta, linuxppc-dev,
	Stefan Agner, Nicolin Chen, Mark Brown, Fabio Estevam,
	linux-arm-kernel

From: Stefan Agner <stefan@agner.ch>

[ Upstream commit d9866572486802bc598a3e8576a5231378d190de ]

Make sure to properly put the of node in case finding the codec
fails.

Fixes: 81e8e4926167 ("ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/imx-sgtl5000.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c
index 8e525f7ac08d..3d99a8579c99 100644
--- a/sound/soc/fsl/imx-sgtl5000.c
+++ b/sound/soc/fsl/imx-sgtl5000.c
@@ -119,7 +119,8 @@ static int imx_sgtl5000_probe(struct platform_device *pdev)
 	codec_dev = of_find_i2c_device_by_node(codec_np);
 	if (!codec_dev) {
 		dev_err(&pdev->dev, "failed to find codec platform device\n");
-		return -EPROBE_DEFER;
+		ret = -EPROBE_DEFER;
+		goto fail;
 	}
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 046/251] clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 043/251] ASoC: imx-sgtl5000: put of nodes if finding codec fails Sasha Levin
@ 2020-01-16 17:33 ` Sasha Levin
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 050/251] ARM: dts: lpc32xx: add required clocks property to keypad device node Sasha Levin
                   ` (30 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:33 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Maxime Ripard, Sasha Levin, Chen-Yu Tsai, linux-clk, linux-arm-kernel

From: Chen-Yu Tsai <wens@csie.org>

[ Upstream commit 108a459ef4cd17a28711d81092044e597b5c7618 ]

The PLL-MIPI clock is somewhat special as it has its own LDOs which
need to be turned on for this PLL to actually work and output a clock
signal.

Add the 2 LDO enable bits to the gate bits.

Fixes: 5690879d93e8 ("clk: sunxi-ng: Add A23 CCU")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/sunxi-ng/ccu-sun8i-a23.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a23.c b/drivers/clk/sunxi-ng/ccu-sun8i-a23.c
index 5c6d37bdf247..765c6977484e 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-a23.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a23.c
@@ -132,7 +132,7 @@ static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_mipi_clk, "pll-mipi",
 				    8, 4,		/* N */
 				    4, 2,		/* K */
 				    0, 4,		/* M */
-				    BIT(31),		/* gate */
+				    BIT(31) | BIT(23) | BIT(22), /* gate */
 				    BIT(28),		/* lock */
 				    CLK_SET_RATE_UNGATE);
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 050/251] ARM: dts: lpc32xx: add required clocks property to keypad device node
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 043/251] ASoC: imx-sgtl5000: put of nodes if finding codec fails Sasha Levin
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 046/251] clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it Sasha Levin
@ 2020-01-16 17:33 ` Sasha Levin
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 051/251] ARM: dts: lpc32xx: reparent keypad controller to SIC1 Sasha Levin
                   ` (29 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:33 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, devicetree, linux-arm-kernel, Vladimir Zapolskiy

From: Vladimir Zapolskiy <vz@mleia.com>

[ Upstream commit 3e88bc38b9f6fe4b69cecf81badd3c19fde97f97 ]

NXP LPC32xx keypad controller requires a clock property to be defined.

The change fixes the driver initialization problem:

  lpc32xx_keys 40050000.key: failed to get clock
  lpc32xx_keys: probe of 40050000.key failed with error -2

Fixes: 93898eb775e5 ("arm: dts: lpc32xx: add clock properties to device nodes")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/lpc32xx.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 5fa3111731cb..da375813afd0 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -462,6 +462,7 @@
 			key: key@40050000 {
 				compatible = "nxp,lpc3220-key";
 				reg = <0x40050000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_KEY>;
 				interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 051/251] ARM: dts: lpc32xx: reparent keypad controller to SIC1
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (2 preceding siblings ...)
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 050/251] ARM: dts: lpc32xx: add required clocks property to keypad device node Sasha Levin
@ 2020-01-16 17:33 ` Sasha Levin
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 052/251] ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller variant Sasha Levin
                   ` (28 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:33 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, devicetree, linux-arm-kernel, Vladimir Zapolskiy

From: Vladimir Zapolskiy <vz@mleia.com>

[ Upstream commit 489261c45f0ebbc1c2813f337bbdf858267f5033 ]

After switching to a new interrupt controller scheme by separating SIC1
and SIC2 from MIC interrupt controller just one SoC keypad controller
was not taken into account, fix it now:

  WARNING: CPU: 0 PID: 1 at kernel/irq/irqdomain.c:524 irq_domain_associate+0x50/0x1b0
  error: hwirq 0x36 is too large for interrupt-controller@40008000
  ...
  lpc32xx_keys 40050000.key: failed to get platform irq
  lpc32xx_keys: probe of 40050000.key failed with error -22

Fixes: 9b8ad3fb81ae ("ARM: dts: lpc32xx: reparent SIC1 and SIC2 interrupts from MIC")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/lpc32xx.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index da375813afd0..6bd196457ccc 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -463,7 +463,8 @@
 				compatible = "nxp,lpc3220-key";
 				reg = <0x40050000 0x1000>;
 				clocks = <&clk LPC32XX_CLK_KEY>;
-				interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&sic1>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 052/251] ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller variant
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (3 preceding siblings ...)
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 051/251] ARM: dts: lpc32xx: reparent keypad controller to SIC1 Sasha Levin
@ 2020-01-16 17:33 ` Sasha Levin
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 053/251] ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller clocks property Sasha Levin
                   ` (27 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:33 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, devicetree, linux-arm-kernel, Vladimir Zapolskiy

From: Vladimir Zapolskiy <vz@mleia.com>

[ Upstream commit 7a0790a4121cbcd111cc537cdc801c46ccb789ee ]

ARM PrimeCell PL111 LCD controller is found on On NXP LPC3230
and LPC3250 SoCs variants, the original reference in compatible
property to an older one ARM PrimeCell PL110 is invalid.

Fixes: e04920d9efcb3 ("ARM: LPC32xx: DTS files for device tree conversion")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/lpc32xx.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 6bd196457ccc..3adbbaff7971 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -139,7 +139,7 @@
 		};
 
 		clcd: clcd@31040000 {
-			compatible = "arm,pl110", "arm,primecell";
+			compatible = "arm,pl111", "arm,primecell";
 			reg = <0x31040000 0x1000>;
 			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk LPC32XX_CLK_LCD>;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 053/251] ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller clocks property
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (4 preceding siblings ...)
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 052/251] ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller variant Sasha Levin
@ 2020-01-16 17:33 ` Sasha Levin
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 054/251] ARM: dts: lpc32xx: phy3250: fix SD card regulator voltage Sasha Levin
                   ` (26 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:33 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, devicetree, linux-arm-kernel, Vladimir Zapolskiy

From: Vladimir Zapolskiy <vz@mleia.com>

[ Upstream commit 30fc01bae3cda747e7d9c352b1aa51ca113c8a9d ]

The originally added ARM PrimeCell PL111 clocks property misses
the required "clcdclk" clock, which is the same as a clock to enable
the LCD controller on NXP LPC3230 and NXP LPC3250 SoCs.

Fixes: 93898eb775e5 ("arm: dts: lpc32xx: add clock properties to device nodes")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/lpc32xx.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 3adbbaff7971..2802c9565b6c 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -142,8 +142,8 @@
 			compatible = "arm,pl111", "arm,primecell";
 			reg = <0x31040000 0x1000>;
 			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk LPC32XX_CLK_LCD>;
-			clock-names = "apb_pclk";
+			clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>;
+			clock-names = "clcdclk", "apb_pclk";
 			status = "disabled";
 		};
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 054/251] ARM: dts: lpc32xx: phy3250: fix SD card regulator voltage
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (5 preceding siblings ...)
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 053/251] ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller clocks property Sasha Levin
@ 2020-01-16 17:33 ` Sasha Levin
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 058/251] thermal: mediatek: fix register index error Sasha Levin
                   ` (25 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:33 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, devicetree, linux-arm-kernel, Vladimir Zapolskiy

From: Vladimir Zapolskiy <vz@mleia.com>

[ Upstream commit dc141b99fc36cf910a1d8d5ee30f43f2442fd1bd ]

The fixed voltage regulator on Phytec phyCORE-LPC3250 board, which
supplies SD/MMC card's power, has a constant output voltage level
of either 3.15V or 3.3V, the actual value depends on JP4 position,
the power rail is referenced as VCC_SDIO in the board hardware manual.

Fixes: d06670e96267 ("arm: dts: phy3250: add SD fixed regulator")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/lpc3250-phy3250.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts
index b7bd3a110a8d..dd0bdf765599 100644
--- a/arch/arm/boot/dts/lpc3250-phy3250.dts
+++ b/arch/arm/boot/dts/lpc3250-phy3250.dts
@@ -49,8 +49,8 @@
 		sd_reg: regulator@2 {
 			compatible = "regulator-fixed";
 			regulator-name = "sd_reg";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio 5 5 0>;
 			enable-active-high;
 		};
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 058/251] thermal: mediatek: fix register index error
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (6 preceding siblings ...)
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 054/251] ARM: dts: lpc32xx: phy3250: fix SD card regulator voltage Sasha Levin
@ 2020-01-16 17:33 ` Sasha Levin
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 085/251] clocksource/drivers/sun5i: Fail gracefully when clock rate is unavailable Sasha Levin
                   ` (24 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:33 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, linux-pm, Michael Kao, Eduardo Valentin,
	linux-mediatek, linux-arm-kernel

From: Michael Kao <michael.kao@mediatek.com>

[ Upstream commit eb9aecd90d1a39601e91cd08b90d5fee51d321a6 ]

The index of msr and adcpnp should match the sensor
which belongs to the selected bank in the for loop.

Fixes: b7cf0053738c ("thermal: Add Mediatek thermal driver for mt2701.")
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/mtk_thermal.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 34169c32d495..ea9558679634 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -348,7 +348,8 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
 	u32 raw;
 
 	for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
-		raw = readl(mt->thermal_base + conf->msr[i]);
+		raw = readl(mt->thermal_base +
+			    conf->msr[conf->bank_data[bank->id].sensors[i]]);
 
 		temp = raw_to_mcelsius(mt,
 				       conf->bank_data[bank->id].sensors[i],
@@ -485,7 +486,8 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
 
 	for (i = 0; i < conf->bank_data[num].num_sensors; i++)
 		writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]],
-		       mt->thermal_base + conf->adcpnp[i]);
+		       mt->thermal_base +
+		       conf->adcpnp[conf->bank_data[num].sensors[i]]);
 
 	writel((1 << conf->bank_data[num].num_sensors) - 1,
 	       mt->thermal_base + TEMP_MONCTL0);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 085/251] clocksource/drivers/sun5i: Fail gracefully when clock rate is unavailable
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (7 preceding siblings ...)
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 058/251] thermal: mediatek: fix register index error Sasha Levin
@ 2020-01-16 17:33 ` Sasha Levin
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 086/251] clocksource/drivers/exynos_mct: Fix error path in timer resources initialization Sasha Levin
                   ` (23 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:33 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Maxime Ripard, Sasha Levin, Chen-Yu Tsai, Daniel Lezcano,
	linux-arm-kernel

From: Chen-Yu Tsai <wens@csie.org>

[ Upstream commit e7e7e0d7beafebd11b0c065cd5fbc1e5759c5aab ]

If the clock tree is not fully populated when the timer-sun5i init code
is called, attempts to get the clock rate for the timer would fail and
return 0.

Make the init code for both clock events and clocksource check the
returned clock rate and fail gracefully if the result is 0, instead of
causing a divide by 0 exception later on.

Fixes: 4a59058f0b09 ("clocksource/drivers/sun5i: Refactor the current code")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/timer-sun5i.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c
index 4f87f3e76d83..c3e96de525a2 100644
--- a/drivers/clocksource/timer-sun5i.c
+++ b/drivers/clocksource/timer-sun5i.c
@@ -201,6 +201,11 @@ static int __init sun5i_setup_clocksource(struct device_node *node,
 	}
 
 	rate = clk_get_rate(clk);
+	if (!rate) {
+		pr_err("Couldn't get parent clock rate\n");
+		ret = -EINVAL;
+		goto err_disable_clk;
+	}
 
 	cs->timer.base = base;
 	cs->timer.clk = clk;
@@ -274,6 +279,11 @@ static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem
 	}
 
 	rate = clk_get_rate(clk);
+	if (!rate) {
+		pr_err("Couldn't get parent clock rate\n");
+		ret = -EINVAL;
+		goto err_disable_clk;
+	}
 
 	ce->timer.base = base;
 	ce->timer.ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 086/251] clocksource/drivers/exynos_mct: Fix error path in timer resources initialization
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (8 preceding siblings ...)
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 085/251] clocksource/drivers/sun5i: Fail gracefully when clock rate is unavailable Sasha Levin
@ 2020-01-16 17:33 ` Sasha Levin
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 087/251] mmc: sdhci-brcmstb: handle mmc_of_parse() errors during probe Sasha Levin
                   ` (22 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:33 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, linux-samsung-soc, Daniel Lezcano,
	Krzysztof Kozlowski, Chanwoo Choi, linux-arm-kernel,
	Marek Szyprowski

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit b9307420196009cdf18bad55e762ac49fb9a80f4 ]

While freeing interrupt handlers in error path, don't assume that all
requested interrupts are per-processor interrupts and properly release
standard interrupts too.

Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Fixes: 56a94f13919c ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/exynos_mct.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index d32248e2ceab..ae3cbaeffd9c 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -563,7 +563,19 @@ static int __init exynos4_timer_resources(struct device_node *np, void __iomem *
 	return 0;
 
 out_irq:
-	free_percpu_irq(mct_irqs[MCT_L0_IRQ], &percpu_mct_tick);
+	if (mct_int_type == MCT_INT_PPI) {
+		free_percpu_irq(mct_irqs[MCT_L0_IRQ], &percpu_mct_tick);
+	} else {
+		for_each_possible_cpu(cpu) {
+			struct mct_clock_event_device *pcpu_mevt =
+				per_cpu_ptr(&percpu_mct_tick, cpu);
+
+			if (pcpu_mevt->evt.irq != -1) {
+				free_irq(pcpu_mevt->evt.irq, pcpu_mevt);
+				pcpu_mevt->evt.irq = -1;
+			}
+		}
+	}
 	return err;
 }
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 087/251] mmc: sdhci-brcmstb: handle mmc_of_parse() errors during probe
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (9 preceding siblings ...)
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 086/251] clocksource/drivers/exynos_mct: Fix error path in timer resources initialization Sasha Levin
@ 2020-01-16 17:33 ` Sasha Levin
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 088/251] ARM: 8847/1: pm: fix HYP/SVC mode mismatch when MCPM is used Sasha Levin
                   ` (21 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:33 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Stefan Wahren, Sasha Levin, Ulf Hansson, linux-mmc,
	bcm-kernel-feedback-list, linux-arm-kernel

From: Stefan Wahren <stefan.wahren@i2se.com>

[ Upstream commit 1e20186e706da8446f9435f2924cd65ab1397e73 ]

We need to handle mmc_of_parse() errors during probe otherwise the
MMC driver could start without proper initialization (e.g. power sequence).

Fixes: 476bf3d62d5c ("mmc: sdhci-brcmstb: Add driver for Broadcom BRCMSTB SoCs")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-brcmstb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c
index 159f6f64c68e..ed6473731b45 100644
--- a/drivers/mmc/host/sdhci-brcmstb.c
+++ b/drivers/mmc/host/sdhci-brcmstb.c
@@ -90,7 +90,9 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev)
 	host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
 
 	sdhci_get_of_property(pdev);
-	mmc_of_parse(host->mmc);
+	res = mmc_of_parse(host->mmc);
+	if (res)
+		goto err;
 
 	/*
 	 * Supply the existing CAPS, but clear the UHS modes. This
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 088/251] ARM: 8847/1: pm: fix HYP/SVC mode mismatch when MCPM is used
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (10 preceding siblings ...)
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 087/251] mmc: sdhci-brcmstb: handle mmc_of_parse() errors during probe Sasha Levin
@ 2020-01-16 17:33 ` Sasha Levin
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 089/251] ARM: 8848/1: virt: Align GIC version check with arm64 counterpart Sasha Levin
                   ` (20 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:33 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Nicolas Pitre, linux-pm, Russell King,
	linux-arm-kernel, Marek Szyprowski

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit ca70ea43f80c98582f5ffbbd1e6f4da2742da0c4 ]

MCPM does a soft reset of the CPUs and uses common cpu_resume() routine to
perform low-level platform initialization. This results in a try to install
HYP stubs for the second time for each CPU and results in false HYP/SVC
mode mismatch detection. The HYP stubs are already installed at the
beginning of the kernel initialization on the boot CPU (head.S) or in the
secondary_startup() for other CPUs. To fix this issue MCPM code should use
a cpu_resume() routine without HYP stubs installation.

This change fixes HYP/SVC mode mismatch on Samsung Exynos5422-based Odroid
XU3/XU4/HC1 boards.

Fixes: 3721924c8154 ("ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/common/mcpm_entry.c   |  2 +-
 arch/arm/include/asm/suspend.h |  1 +
 arch/arm/kernel/sleep.S        | 12 ++++++++++++
 3 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c
index a923524d1040..8617323eb273 100644
--- a/arch/arm/common/mcpm_entry.c
+++ b/arch/arm/common/mcpm_entry.c
@@ -379,7 +379,7 @@ static int __init nocache_trampoline(unsigned long _arg)
 	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
 	phys_reset_t phys_reset;
 
-	mcpm_set_entry_vector(cpu, cluster, cpu_resume);
+	mcpm_set_entry_vector(cpu, cluster, cpu_resume_no_hyp);
 	setup_mm_for_reboot();
 
 	__mcpm_cpu_going_down(cpu, cluster);
diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h
index 6c7182f32cef..e6c2f426f8c8 100644
--- a/arch/arm/include/asm/suspend.h
+++ b/arch/arm/include/asm/suspend.h
@@ -7,6 +7,7 @@ struct sleep_save_sp {
 };
 
 extern void cpu_resume(void);
+extern void cpu_resume_no_hyp(void);
 extern void cpu_resume_arm(void);
 extern int cpu_suspend(unsigned long, int (*)(unsigned long));
 
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index 0f6c1000582c..c8569390e7e7 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -119,6 +119,14 @@ ENDPROC(cpu_resume_after_mmu)
 	.text
 	.align
 
+#ifdef CONFIG_MCPM
+	.arm
+THUMB(	.thumb			)
+ENTRY(cpu_resume_no_hyp)
+ARM_BE8(setend be)			@ ensure we are in BE mode
+	b	no_hyp
+#endif
+
 #ifdef CONFIG_MMU
 	.arm
 ENTRY(cpu_resume_arm)
@@ -134,6 +142,7 @@ ARM_BE8(setend be)			@ ensure we are in BE mode
 	bl	__hyp_stub_install_secondary
 #endif
 	safe_svcmode_maskall r1
+no_hyp:
 	mov	r1, #0
 	ALT_SMP(mrc p15, 0, r0, c0, c0, 5)
 	ALT_UP_B(1f)
@@ -162,6 +171,9 @@ ENDPROC(cpu_resume)
 
 #ifdef CONFIG_MMU
 ENDPROC(cpu_resume_arm)
+#endif
+#ifdef CONFIG_MCPM
+ENDPROC(cpu_resume_no_hyp)
 #endif
 
 	.align 2
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 089/251] ARM: 8848/1: virt: Align GIC version check with arm64 counterpart
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (11 preceding siblings ...)
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 088/251] ARM: 8847/1: pm: fix HYP/SVC mode mismatch when MCPM is used Sasha Levin
@ 2020-01-16 17:33 ` Sasha Levin
  2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 104/251] ARM: OMAP2+: Fix potentially uninitialized return value for _setup_reset() Sasha Levin
                   ` (19 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:33 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Marc Zyngier, Sasha Levin, Russell King, Vladimir Murzin,
	linux-arm-kernel

From: Vladimir Murzin <vladimir.murzin@arm.com>

[ Upstream commit 9db043d36bd379f4cc99054c079de0dabfc38d03 ]

arm64 has got relaxation on GIC version check at early boot stage due
to update of the GIC architecture let's align ARM with that.

To help backports (even though the code was correct at the time of writing)
Fixes: e59941b9b381 ("ARM: 8527/1: virt: enable GICv3 system registers")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/kernel/hyp-stub.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S
index 15d073ae5da2..f5e5e3e19659 100644
--- a/arch/arm/kernel/hyp-stub.S
+++ b/arch/arm/kernel/hyp-stub.S
@@ -179,8 +179,8 @@ ARM_BE8(orr	r7, r7, #(1 << 25))     @ HSCTLR.EE
 	@ Check whether GICv3 system registers are available
 	mrc	p15, 0, r7, c0, c1, 1	@ ID_PFR1
 	ubfx	r7, r7, #28, #4
-	cmp	r7, #1
-	bne	2f
+	teq	r7, #0
+	beq	2f
 
 	@ Enable system register accesses
 	mrc	p15, 4, r7, c12, c9, 5	@ ICC_HSRE
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 104/251] ARM: OMAP2+: Fix potentially uninitialized return value for _setup_reset()
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (12 preceding siblings ...)
  2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 089/251] ARM: 8848/1: virt: Align GIC version check with arm64 counterpart Sasha Levin
@ 2020-01-16 17:34 ` Sasha Levin
  2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 110/251] soc/fsl/qe: Fix an error code in qe_pin_request() Sasha Levin
                   ` (18 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:34 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Paul Walmsley, Tony Lindgren, Tero Kristo,
	linux-omap, linux-arm-kernel

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 7f0d078667a494466991aa7133f49594f32ff6a2 ]

Commit 747834ab8347 ("ARM: OMAP2+: hwmod: revise hardreset behavior") made
the call to _enable() conditional based on no oh->rst_lines_cnt. This
caused the return value to be potentially uninitialized. Curiously we see
no compiler warnings for this, probably as this gets inlined.

We call _setup_reset() from _setup() and only _setup_postsetup() if the
return value is zero. Currently the return value can be uninitialized for
cases where oh->rst_lines_cnt is set and HWMOD_INIT_NO_RESET is not set.

Fixes: 747834ab8347 ("ARM: OMAP2+: hwmod: revise hardreset behavior")
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/omap_hwmod.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index bfc74954540c..9421b78f869d 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2588,7 +2588,7 @@ static void _setup_iclk_autoidle(struct omap_hwmod *oh)
  */
 static int _setup_reset(struct omap_hwmod *oh)
 {
-	int r;
+	int r = 0;
 
 	if (oh->_state != _HWMOD_STATE_INITIALIZED)
 		return -EINVAL;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 110/251] soc/fsl/qe: Fix an error code in qe_pin_request()
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (13 preceding siblings ...)
  2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 104/251] ARM: OMAP2+: Fix potentially uninitialized return value for _setup_reset() Sasha Levin
@ 2020-01-16 17:34 ` Sasha Levin
  2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 111/251] spi: bcm2835aux: fix driver to not allow 65535 (=-1) cs-gpios Sasha Levin
                   ` (17 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:34 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, linuxppc-dev, linux-arm-kernel, Dan Carpenter, Li Yang

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 5674a92ca4b7e5a6a19231edd10298d30324cd27 ]

We forgot to set "err" on this error path.

Fixes: 1a2d397a6eb5 ("gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/fsl/qe/gpio.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/fsl/qe/gpio.c b/drivers/soc/fsl/qe/gpio.c
index 0aaf429f31d5..b5a7107a9c0a 100644
--- a/drivers/soc/fsl/qe/gpio.c
+++ b/drivers/soc/fsl/qe/gpio.c
@@ -152,8 +152,10 @@ struct qe_pin *qe_pin_request(struct device_node *np, int index)
 	if (err < 0)
 		goto err0;
 	gc = gpio_to_chip(err);
-	if (WARN_ON(!gc))
+	if (WARN_ON(!gc)) {
+		err = -ENODEV;
 		goto err0;
+	}
 
 	if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) {
 		pr_debug("%s: tried to get a non-qe pin\n", __func__);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 111/251] spi: bcm2835aux: fix driver to not allow 65535 (=-1) cs-gpios
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (14 preceding siblings ...)
  2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 110/251] soc/fsl/qe: Fix an error code in qe_pin_request() Sasha Levin
@ 2020-01-16 17:34 ` Sasha Levin
  2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 114/251] ARM: pxa: ssp: Fix "WARNING: invalid free of devm_ allocated data" Sasha Levin
                   ` (16 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:34 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Stefan Wahren, Sasha Levin, linux-spi, Mark Brown,
	bcm-kernel-feedback-list, linux-rpi-kernel, Martin Sperl,
	linux-arm-kernel

From: Martin Sperl <kernel@martin.sperl.org>

[ Upstream commit 509c583620e9053e43d611bf1614fc3d3abafa96 ]

The original driver by default defines num_chipselects as -1.
This actually allicates an array of 65535 entries in
of_spi_register_master.

There is a side-effect for buggy device trees that (contrary to
dt-binding documentation) have no cs-gpio defined.

This mode was never supported by the driver due to limitations
of native cs and additional code complexity and is explicitly
not stated to be implemented.

To keep backwards compatibility with such buggy DTs we limit
the number of chip_selects to 1, as for all practical purposes
it is only ever realistic to use a single chip select in
native cs mode without negative side-effects.

Fixes: 1ea29b39f4c812ec ("spi: bcm2835aux: add bcm2835 auxiliary spi device...")
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-bcm2835aux.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c
index 5c89bbb05441..e075712c501e 100644
--- a/drivers/spi/spi-bcm2835aux.c
+++ b/drivers/spi/spi-bcm2835aux.c
@@ -416,7 +416,18 @@ static int bcm2835aux_spi_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, master);
 	master->mode_bits = (SPI_CPOL | SPI_CS_HIGH | SPI_NO_CS);
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
-	master->num_chipselect = -1;
+	/* even though the driver never officially supported native CS
+	 * allow a single native CS for legacy DT support purposes when
+	 * no cs-gpio is configured.
+	 * Known limitations for native cs are:
+	 * * multiple chip-selects: cs0-cs2 are all simultaniously asserted
+	 *     whenever there is a transfer -  this even includes SPI_NO_CS
+	 * * SPI_CS_HIGH: is ignores - cs are always asserted low
+	 * * cs_change: cs is deasserted after each spi_transfer
+	 * * cs_delay_usec: cs is always deasserted one SCK cycle after
+	 *     a spi_transfer
+	 */
+	master->num_chipselect = 1;
 	master->transfer_one = bcm2835aux_spi_transfer_one;
 	master->handle_err = bcm2835aux_spi_handle_err;
 	master->prepare_message = bcm2835aux_spi_prepare_message;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 114/251] ARM: pxa: ssp: Fix "WARNING: invalid free of devm_ allocated data"
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (15 preceding siblings ...)
  2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 111/251] spi: bcm2835aux: fix driver to not allow 65535 (=-1) cs-gpios Sasha Levin
@ 2020-01-16 17:34 ` Sasha Levin
  2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 118/251] ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect Sasha Levin
                   ` (15 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:34 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Robert Jarzmik, YueHaibing, linux-arm-kernel

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 9ee8578d953023cc57e7e736ae48502c707c0210 ]

Since commit 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions")
kfree, iounmap, clk_put etc are not needed anymore in remove path.

Fixes: 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
[ commit message spelling fix ]
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/plat-pxa/ssp.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index b92673efffff..97bd43c16cd8 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -230,18 +230,12 @@ static int pxa_ssp_probe(struct platform_device *pdev)
 
 static int pxa_ssp_remove(struct platform_device *pdev)
 {
-	struct resource *res;
 	struct ssp_device *ssp;
 
 	ssp = platform_get_drvdata(pdev);
 	if (ssp == NULL)
 		return -ENODEV;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
-	clk_put(ssp->clk);
-
 	mutex_lock(&ssp_lock);
 	list_del(&ssp->node);
 	mutex_unlock(&ssp_lock);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 118/251] ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (16 preceding siblings ...)
  2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 114/251] ARM: pxa: ssp: Fix "WARNING: invalid free of devm_ allocated data" Sasha Levin
@ 2020-01-16 17:34 ` Sasha Levin
  2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 138/251] pwm: meson: Don't disable PWM when setting duty repeatedly Sasha Levin
                   ` (14 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:34 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, devicetree, Li Yang, Claudiu Manoil,
	Vladimir Oltean, Shawn Guo, linux-arm-kernel

From: Vladimir Oltean <olteanv@gmail.com>

[ Upstream commit c7861adbe37f576931650ad8ef805e0c47564b9a ]

Each eTSEC MAC has its own TBI (SGMII) PCS and private MDIO bus.
But due to a DTS oversight, both SGMII-compatible MACs of the LS1021 SoC
are pointing towards the same internal PCS. Therefore nobody is
controlling the internal PCS of eTSEC0.

Upon initial ndo_open, the SGMII link is ok by virtue of U-boot
initialization. But upon an ifdown/ifup sequence, the code path from
ndo_open -> init_phy -> gfar_configure_serdes does not get executed for
the PCS of eTSEC0 (and is executed twice for MAC eTSEC1). So the SGMII
link remains down for eTSEC0. On the LS1021A-TWR board, to signal this
failure condition, the PHY driver keeps printing
'803x_aneg_done: SGMII link is not ok'.

Also, it changes compatible of mdio0 to "fsl,etsec2-mdio" to match
mdio1 device.

Fixes: 055223d4d22d ("ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ls1021a-twr.dts |  9 ++++++++-
 arch/arm/boot/dts/ls1021a.dtsi    | 11 ++++++++++-
 2 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index 44715c8ef756..72a3fc63d0ec 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -143,7 +143,7 @@
 };
 
 &enet0 {
-	tbi-handle = <&tbi1>;
+	tbi-handle = <&tbi0>;
 	phy-handle = <&sgmii_phy2>;
 	phy-connection-type = "sgmii";
 	status = "okay";
@@ -222,6 +222,13 @@
 	sgmii_phy2: ethernet-phy@2 {
 		reg = <0x2>;
 	};
+	tbi0: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&mdio1 {
 	tbi1: tbi-phy@1f {
 		reg = <0x1f>;
 		device_type = "tbi-phy";
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 825f6eae3d1c..27133c3a4b12 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -505,13 +505,22 @@
 		};
 
 		mdio0: mdio@2d24000 {
-			compatible = "gianfar";
+			compatible = "fsl,etsec2-mdio";
 			device_type = "mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2d24000 0x0 0x4000>;
 		};
 
+		mdio1: mdio@2d64000 {
+			compatible = "fsl,etsec2-mdio";
+			device_type = "mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2d64000 0x0 0x4000>,
+			      <0x0 0x2d50030 0x0 0x4>;
+		};
+
 		ptp_clock@2d10e00 {
 			compatible = "fsl,etsec-ptp";
 			reg = <0x0 0x2d10e00 0x0 0xb0>;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 138/251] pwm: meson: Don't disable PWM when setting duty repeatedly
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (17 preceding siblings ...)
  2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 118/251] ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect Sasha Levin
@ 2020-01-16 17:34 ` Sasha Levin
  2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 139/251] ARM: riscpc: fix lack of keyboard interrupts after irq conversion Sasha Levin
                   ` (13 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:34 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, linux-pwm, Neil Armstrong, Martin Blumenstingl,
	Bichao Zheng, Thierry Reding, linux-amlogic, linux-arm-kernel

From: Bichao Zheng <bichao.zheng@amlogic.com>

[ Upstream commit a279345807e1e0ae79567a52cfdd9d30c9174a3c ]

There is an abnormally low about 20ms,when setting duty repeatedly.
Because setting the duty will disable PWM and then enable. Delete
this operation now.

Fixes: 211ed630753d2f ("pwm: Add support for Meson PWM Controller")
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
[ Dropped code instead of hiding it behind a comment ]
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-meson.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index f58a4867b519..a196439ee14c 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -320,11 +320,6 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	if (state->period != channel->state.period ||
 	    state->duty_cycle != channel->state.duty_cycle ||
 	    state->polarity != channel->state.polarity) {
-		if (channel->state.enabled) {
-			meson_pwm_disable(meson, pwm->hwpwm);
-			channel->state.enabled = false;
-		}
-
 		if (state->polarity != channel->state.polarity) {
 			if (state->polarity == PWM_POLARITY_NORMAL)
 				meson->inverter_mask |= BIT(pwm->hwpwm);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 139/251] ARM: riscpc: fix lack of keyboard interrupts after irq conversion
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (18 preceding siblings ...)
  2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 138/251] pwm: meson: Don't disable PWM when setting duty repeatedly Sasha Levin
@ 2020-01-16 17:34 ` Sasha Levin
  2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 146/251] serial: stm32: fix transmit_chars when tx is stopped Sasha Levin
                   ` (12 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:34 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Sasha Levin, Russell King, linux-arm-kernel

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 63a0666bca9311f35017be454587f3ba903644b8 ]

Fix lack of keyboard interrupts for RiscPC due to incorrect conversion.

Fixes: e8d36d5dbb6a ("ARM: kill off set_irq_flags usage")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-rpc/irq.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
index 66502e6207fe..fce7fecbd8fa 100644
--- a/arch/arm/mach-rpc/irq.c
+++ b/arch/arm/mach-rpc/irq.c
@@ -117,7 +117,7 @@ extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end;
 
 void __init rpc_init_irq(void)
 {
-	unsigned int irq, clr, set = 0;
+	unsigned int irq, clr, set;
 
 	iomd_writeb(0, IOMD_IRQMASKA);
 	iomd_writeb(0, IOMD_IRQMASKB);
@@ -129,6 +129,7 @@ void __init rpc_init_irq(void)
 
 	for (irq = 0; irq < NR_IRQS; irq++) {
 		clr = IRQ_NOREQUEST;
+		set = 0;
 
 		if (irq <= 6 || (irq >= 9 && irq <= 15))
 			clr |= IRQ_NOPROBE;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 146/251] serial: stm32: fix transmit_chars when tx is stopped
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (19 preceding siblings ...)
  2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 139/251] ARM: riscpc: fix lack of keyboard interrupts after irq conversion Sasha Levin
@ 2020-01-16 17:34 ` Sasha Levin
  2020-01-16 17:35 ` [PATCH AUTOSEL 4.9 184/251] ASoC: sun4i-i2s: RX and TX counter registers are swapped Sasha Levin
                   ` (11 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:34 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Greg Kroah-Hartman, Erwan Le Ray, linux-serial,
	linux-stm32, linux-arm-kernel

From: Erwan Le Ray <erwan.leray@st.com>

[ Upstream commit b83b957c91f68e53f0dc596e129e8305761f2a32 ]

Disables the tx irq  when the transmission is ended and updates stop_tx
conditions for code cleanup.

Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/stm32-usart.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 033856287ca2..ea8b591dd46f 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -293,13 +293,8 @@ static void stm32_transmit_chars(struct uart_port *port)
 		return;
 	}
 
-	if (uart_tx_stopped(port)) {
-		stm32_stop_tx(port);
-		return;
-	}
-
-	if (uart_circ_empty(xmit)) {
-		stm32_stop_tx(port);
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		stm32_clr_bits(port, ofs->cr1, USART_CR1_TXEIE);
 		return;
 	}
 
@@ -312,7 +307,7 @@ static void stm32_transmit_chars(struct uart_port *port)
 		uart_write_wakeup(port);
 
 	if (uart_circ_empty(xmit))
-		stm32_stop_tx(port);
+		stm32_clr_bits(port, ofs->cr1, USART_CR1_TXEIE);
 }
 
 static irqreturn_t stm32_interrupt(int irq, void *ptr)
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 184/251] ASoC: sun4i-i2s: RX and TX counter registers are swapped
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (20 preceding siblings ...)
  2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 146/251] serial: stm32: fix transmit_chars when tx is stopped Sasha Levin
@ 2020-01-16 17:35 ` Sasha Levin
  2020-01-16 17:35 ` [PATCH AUTOSEL 4.9 205/251] net: stmmac: dwmac-meson8b: Fix signedness bug in probe Sasha Levin
                   ` (10 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:35 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Maxime Ripard, Sasha Levin, alsa-devel, Mark Brown, linux-arm-kernel

From: Maxime Ripard <maxime.ripard@bootlin.com>

[ Upstream commit cf2c0e1ce9544df42170fb921f12da82dc0cc8d6 ]

The RX and TX counters registers offset have been swapped, fix that.

Fixes: fa7c0d13cb26 ("ASoC: sunxi: Add Allwinner A10 Digital Audio driver")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/8b26477560ad5fd8f69e037b167c5e61de5c26a3.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sunxi/sun4i-i2s.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 15c92400cea4..02c373c65e19 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -78,8 +78,8 @@
 #define SUN4I_I2S_CLK_DIV_MCLK_MASK		GENMASK(3, 0)
 #define SUN4I_I2S_CLK_DIV_MCLK(mclk)			((mclk) << 0)
 
-#define SUN4I_I2S_RX_CNT_REG		0x28
-#define SUN4I_I2S_TX_CNT_REG		0x2c
+#define SUN4I_I2S_TX_CNT_REG		0x28
+#define SUN4I_I2S_RX_CNT_REG		0x2c
 
 #define SUN4I_I2S_TX_CHAN_SEL_REG	0x30
 #define SUN4I_I2S_TX_CHAN_SEL(num_chan)		(((num_chan) - 1) << 0)
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 205/251] net: stmmac: dwmac-meson8b: Fix signedness bug in probe
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (21 preceding siblings ...)
  2020-01-16 17:35 ` [PATCH AUTOSEL 4.9 184/251] ASoC: sun4i-i2s: RX and TX counter registers are swapped Sasha Levin
@ 2020-01-16 17:35 ` Sasha Levin
  2020-01-16 17:35 ` [PATCH AUTOSEL 4.9 207/251] net: ethernet: stmmac: Fix signedness bug in ipq806x_gmac_of_parse() Sasha Levin
                   ` (9 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:35 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Martin Blumenstingl, netdev, linux-stm32,
	Dan Carpenter, linux-amlogic, David S . Miller, linux-arm-kernel

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit f10210517a2f37feea2edf85eb34c98977265c16 ]

The "dwmac->phy_mode" is an enum and in this context GCC treats it as
an unsigned int so the error handling is never triggered.

Fixes: 566e82516253 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index f356a44bcb81..6704d3e0392d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -280,7 +280,7 @@ static int meson8b_dwmac_probe(struct platform_device *pdev)
 
 	dwmac->pdev = pdev;
 	dwmac->phy_mode = of_get_phy_mode(pdev->dev.of_node);
-	if (dwmac->phy_mode < 0) {
+	if ((int)dwmac->phy_mode < 0) {
 		dev_err(&pdev->dev, "missing phy-mode property\n");
 		ret = -EINVAL;
 		goto err_remove_config_dt;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 207/251] net: ethernet: stmmac: Fix signedness bug in ipq806x_gmac_of_parse()
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (22 preceding siblings ...)
  2020-01-16 17:35 ` [PATCH AUTOSEL 4.9 205/251] net: stmmac: dwmac-meson8b: Fix signedness bug in probe Sasha Levin
@ 2020-01-16 17:35 ` Sasha Levin
  2020-01-16 17:35 ` [PATCH AUTOSEL 4.9 210/251] net: stmmac: gmac4+: Not all Unicast addresses may be available Sasha Levin
                   ` (8 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:35 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, netdev, linux-stm32, Dan Carpenter,
	David S . Miller, linux-arm-kernel

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 231042181dc9d6122c6faba64e99ccb25f13cc6c ]

The "gmac->phy_mode" variable is an enum and in this context GCC will
treat it as an unsigned int so the error handling will never be
triggered.

Fixes: b1c17215d718 ("stmmac: add ipq806x glue layer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
index 866444b6c82f..11a4a81b0397 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -203,7 +203,7 @@ static int ipq806x_gmac_of_parse(struct ipq806x_gmac *gmac)
 	struct device *dev = &gmac->pdev->dev;
 
 	gmac->phy_mode = of_get_phy_mode(dev->of_node);
-	if (gmac->phy_mode < 0) {
+	if ((int)gmac->phy_mode < 0) {
 		dev_err(dev, "missing phy mode property\n");
 		return -EINVAL;
 	}
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 210/251] net: stmmac: gmac4+: Not all Unicast addresses may be available
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (23 preceding siblings ...)
  2020-01-16 17:35 ` [PATCH AUTOSEL 4.9 207/251] net: ethernet: stmmac: Fix signedness bug in ipq806x_gmac_of_parse() Sasha Levin
@ 2020-01-16 17:35 ` Sasha Levin
  2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 214/251] net: stmmac: fix length of PTP clock's name string Sasha Levin
                   ` (7 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:35 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Jose Abreu, Sasha Levin, netdev, David S . Miller, linux-stm32,
	linux-arm-kernel

From: Jose Abreu <Jose.Abreu@synopsys.com>

[ Upstream commit 25683bab09a70542b9f8e3e28f79b3369e56701f ]

Some setups may not have all Unicast addresses filters available. Check
the number of available filters before trying to setup it.

Fixes: 477286b53f55 ("stmmac: add GMAC4 core support")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index f46f2bfc2cc0..4216c0a5eaf5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -168,7 +168,7 @@ static void dwmac4_set_filter(struct mac_device_info *hw,
 	}
 
 	/* Handle multiple unicast addresses */
-	if (netdev_uc_count(dev) > GMAC_MAX_PERFECT_ADDRESSES) {
+	if (netdev_uc_count(dev) > hw->unicast_filter_entries) {
 		/* Switch to promiscuous mode if more than 128 addrs
 		 * are required
 		 */
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 214/251] net: stmmac: fix length of PTP clock's name string
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (24 preceding siblings ...)
  2020-01-16 17:35 ` [PATCH AUTOSEL 4.9 210/251] net: stmmac: gmac4+: Not all Unicast addresses may be available Sasha Levin
@ 2020-01-16 17:36 ` Sasha Levin
  2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 218/251] dmaengine: imx-sdma: fix size check for sdma script_number Sasha Levin
                   ` (6 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:36 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Jakub Kicinski, Antonio Borneo, netdev, linux-stm32,
	linux-arm-kernel

From: Antonio Borneo <antonio.borneo@st.com>

[ Upstream commit 5da202c88f8c355ad79bc2e8eb582e6d433060e7 ]

The field "name" in struct ptp_clock_info has a fixed size of 16
chars and is used as zero terminated string by clock_name_show()
in drivers/ptp/ptp_sysfs.c
The current initialization value requires 17 chars to fit also the
null termination, and this causes overflow to the next bytes in
the struct when the string is read as null terminated:
	hexdump -C /sys/class/ptp/ptp0/clock_name
	00000000  73 74 6d 6d 61 63 5f 70  74 70 5f 63 6c 6f 63 6b  |stmmac_ptp_clock|
	00000010  a0 ac b9 03 0a                                    |.....|
where the extra 4 bytes (excluding the newline) after the string
represent the integer 0x03b9aca0 = 62500000 assigned to the field
"max_adj" that follows "name" in the same struct.

There is no strict requirement for the "name" content and in the
comment in ptp_clock_kernel.h it's reported it should just be 'A
short "friendly name" to identify the clock'.
Replace it with "stmmac ptp".

Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
index 3eb281d1db08..231330809037 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
@@ -158,7 +158,7 @@ static int stmmac_enable(struct ptp_clock_info *ptp,
 /* structure describing a PTP hardware clock */
 static struct ptp_clock_info stmmac_ptp_clock_ops = {
 	.owner = THIS_MODULE,
-	.name = "stmmac_ptp_clock",
+	.name = "stmmac ptp",
 	.max_adj = 62500000,
 	.n_alarm = 0,
 	.n_ext_ts = 0,
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 218/251] dmaengine: imx-sdma: fix size check for sdma script_number
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (25 preceding siblings ...)
  2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 214/251] net: stmmac: fix length of PTP clock's name string Sasha Levin
@ 2020-01-16 17:36 ` Sasha Levin
  2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 224/251] mt7601u: fix bbp version check in mt7601u_wait_bbp_ready Sasha Levin
                   ` (5 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:36 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Jurgen Lambrecht, Vinod Koul, dmaengine, stable,
	Robin Gong, linux-arm-kernel

From: Robin Gong <yibin.gong@nxp.com>

[ Upstream commit bd73dfabdda280fc5f05bdec79b6721b4b2f035f ]

Illegal memory will be touch if SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3
(41) exceed the size of structure sdma_script_start_addrs(40),
thus cause memory corrupt such as slob block header so that kernel
trap into while() loop forever in slob_free(). Please refer to below
code piece in imx-sdma.c:
for (i = 0; i < sdma->script_number; i++)
	if (addr_arr[i] > 0)
		saddr_arr[i] = addr_arr[i]; /* memory corrupt here */
That issue was brought by commit a572460be9cf ("dmaengine: imx-sdma: Add
support for version 3 firmware") because SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3
(38->41 3 scripts added) not align with script number added in
sdma_script_start_addrs(2 scripts).

Fixes: a572460be9cf ("dmaengine: imx-sdma: Add support for version 3 firmware")
Cc: stable@vger.kernel
Link: https://www.spinics.net/lists/arm-kernel/msg754895.html
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reported-by: Jurgen Lambrecht <J.Lambrecht@TELEVIC.com>
Link: https://lore.kernel.org/r/1569347584-3478-1-git-send-email-yibin.gong@nxp.com
[vkoul: update the patch title]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/imx-sdma.c                     | 8 ++++++++
 include/linux/platform_data/dma-imx-sdma.h | 3 +++
 2 files changed, 11 insertions(+)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 9f240b2d85a5..558d509b7d85 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1441,6 +1441,14 @@ static void sdma_add_scripts(struct sdma_engine *sdma,
 	if (!sdma->script_number)
 		sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1;
 
+	if (sdma->script_number > sizeof(struct sdma_script_start_addrs)
+				  / sizeof(s32)) {
+		dev_err(sdma->dev,
+			"SDMA script number %d not match with firmware.\n",
+			sdma->script_number);
+		return;
+	}
+
 	for (i = 0; i < sdma->script_number; i++)
 		if (addr_arr[i] > 0)
 			saddr_arr[i] = addr_arr[i];
diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h
index 2d08816720f6..5bb0a119f39a 100644
--- a/include/linux/platform_data/dma-imx-sdma.h
+++ b/include/linux/platform_data/dma-imx-sdma.h
@@ -50,7 +50,10 @@ struct sdma_script_start_addrs {
 	/* End of v2 array */
 	s32 zcanfd_2_mcu_addr;
 	s32 zqspi_2_mcu_addr;
+	s32 mcu_2_ecspi_addr;
 	/* End of v3 array */
+	s32 mcu_2_zqspi_addr;
+	/* End of v4 array */
 };
 
 /**
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 224/251] mt7601u: fix bbp version check in mt7601u_wait_bbp_ready
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (26 preceding siblings ...)
  2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 218/251] dmaengine: imx-sdma: fix size check for sdma script_number Sasha Levin
@ 2020-01-16 17:36 ` Sasha Levin
  2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 229/251] spi: atmel: fix handling of cs_change set on non-last xfer Sasha Levin
                   ` (4 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:36 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Jakub Kicinski, netdev, linux-wireless,
	linux-mediatek, linux-arm-kernel, Lorenzo Bianconi, Kalle Valo

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit 15e14f76f85f4f0eab3b8146e1cd3c58ce272823 ]

Fix bbp ready check in mt7601u_wait_bbp_ready. The issue is reported by
coverity with the following error:

Logical vs. bitwise operator
The expression's value does not depend on the operands; inadvertent use
of the wrong operator is a likely logic error.

Addresses-Coverity-ID: 1309441 ("Logical vs. bitwise operator")
Fixes: c869f77d6abb ("add mt7601u driver")
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt7601u/phy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt7601u/phy.c b/drivers/net/wireless/mediatek/mt7601u/phy.c
index ca09a5d4305e..71a47459bf8a 100644
--- a/drivers/net/wireless/mediatek/mt7601u/phy.c
+++ b/drivers/net/wireless/mediatek/mt7601u/phy.c
@@ -221,7 +221,7 @@ int mt7601u_wait_bbp_ready(struct mt7601u_dev *dev)
 
 	do {
 		val = mt7601u_bbp_rr(dev, MT_BBP_REG_VERSION);
-		if (val && ~val)
+		if (val && val != 0xff)
 			break;
 	} while (--i);
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 229/251] spi: atmel: fix handling of cs_change set on non-last xfer
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (27 preceding siblings ...)
  2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 224/251] mt7601u: fix bbp version check in mt7601u_wait_bbp_ready Sasha Levin
@ 2020-01-16 17:36 ` Sasha Levin
  2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 232/251] clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume Sasha Levin
                   ` (3 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:36 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Mans Rullgard, Gregory CLEMENT, Nicolas Ferre,
	linux-spi, Mark Brown, linux-arm-kernel

From: Mans Rullgard <mans@mansr.com>

[ Upstream commit fed8d8c7a6dc2a76d7764842853d81c770b0788e ]

The driver does the wrong thing when cs_change is set on a non-last
xfer in a message.  When cs_change is set, the driver deactivates the
CS and leaves it off until a later xfer again has cs_change set whereas
it should be briefly toggling CS off and on again.

This patch brings the behaviour of the driver back in line with the
documentation and common sense.  The delay of 10 us is the same as is
used by the default spi_transfer_one_message() function in spi.c.
[gregory: rebased on for-5.5 from spi tree]
Fixes: 8090d6d1a415 ("spi: atmel: Refactor spi-atmel to use SPI framework queue")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20191018153504.4249-1-gregory.clement@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-atmel.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 691c04b3e5b6..938840af9c50 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -315,7 +315,6 @@ struct atmel_spi {
 	struct atmel_spi_dma	dma;
 
 	bool			keep_cs;
-	bool			cs_active;
 
 	u32			fifo_size;
 };
@@ -1404,11 +1403,9 @@ static int atmel_spi_one_transfer(struct spi_master *master,
 				 &msg->transfers)) {
 			as->keep_cs = true;
 		} else {
-			as->cs_active = !as->cs_active;
-			if (as->cs_active)
-				cs_activate(as, msg->spi);
-			else
-				cs_deactivate(as, msg->spi);
+			cs_deactivate(as, msg->spi);
+			udelay(10);
+			cs_activate(as, msg->spi);
 		}
 	}
 
@@ -1431,7 +1428,6 @@ static int atmel_spi_transfer_one_message(struct spi_master *master,
 	atmel_spi_lock(as);
 	cs_activate(as, spi);
 
-	as->cs_active = true;
 	as->keep_cs = false;
 
 	msg->status = 0;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 232/251] clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (28 preceding siblings ...)
  2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 229/251] spi: atmel: fix handling of cs_change set on non-last xfer Sasha Levin
@ 2020-01-16 17:36 ` Sasha Levin
  2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 235/251] media: exynos4-is: Fix recursive locking in isp_video_release() Sasha Levin
                   ` (2 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:36 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, linux-samsung-soc, Sylwester Nawrocki,
	Marian Mihailescu, linux-clk, linux-arm-kernel

From: Marian Mihailescu <mihailescu2m@gmail.com>

[ Upstream commit e21be0d1d7bd7f78a77613f6bcb6965e72b22fc1 ]

Save and restore top PLL related configuration registers for big (APLL)
and LITTLE (KPLL) cores during suspend/resume cycle. So far, CPU clocks
were reset to default values after suspend/resume cycle and performance
after system resume was affected when performance governor has been selected.

Fixes: 773424326b51 ("clk: samsung: exynos5420: add more registers to restore list")
Signed-off-by: Marian Mihailescu <mihailescu2m@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/samsung/clk-exynos5420.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 2bb88d125113..7f8c7cf3c2ab 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -170,6 +170,8 @@ static const unsigned long exynos5x_clk_regs[] __initconst = {
 	GATE_BUS_CPU,
 	GATE_SCLK_CPU,
 	CLKOUT_CMU_CPU,
+	APLL_CON0,
+	KPLL_CON0,
 	CPLL_CON0,
 	DPLL_CON0,
 	EPLL_CON0,
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 235/251] media: exynos4-is: Fix recursive locking in isp_video_release()
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (29 preceding siblings ...)
  2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 232/251] clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume Sasha Levin
@ 2020-01-16 17:36 ` Sasha Levin
  2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 240/251] tty: serial: imx: use the sg count from dma_map_sg Sasha Levin
  2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 249/251] arm64: dts: juno: Fix UART frequency Sasha Levin
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:36 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, linux-samsung-soc, Seung-Woo Kim,
	Sylwester Nawrocki, Hans Verkuil, Mauro Carvalho Chehab,
	linux-arm-kernel, linux-media

From: Seung-Woo Kim <sw0312.kim@samsung.com>

[ Upstream commit 704c6c80fb471d1bb0ef0d61a94617d1d55743cd ]

>From isp_video_release(), &isp->video_lock is held and subsequent
vb2_fop_release() tries to lock vdev->lock which is same with the
previous one. Replace vb2_fop_release() with _vb2_fop_release() to
fix the recursive locking.

Fixes: 1380f5754cb0 ("[media] videobuf2: Add missing lock held on vb2_fop_release")
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/exynos4-is/fimc-isp-video.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/exynos4-is/fimc-isp-video.c b/drivers/media/platform/exynos4-is/fimc-isp-video.c
index e00fa03ddc3e..0c0eec671d49 100644
--- a/drivers/media/platform/exynos4-is/fimc-isp-video.c
+++ b/drivers/media/platform/exynos4-is/fimc-isp-video.c
@@ -316,7 +316,7 @@ static int isp_video_release(struct file *file)
 		ivc->streaming = 0;
 	}
 
-	vb2_fop_release(file);
+	_vb2_fop_release(file, NULL);
 
 	if (v4l2_fh_is_singular_file(file)) {
 		fimc_pipeline_call(&ivc->ve, close);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 240/251] tty: serial: imx: use the sg count from dma_map_sg
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (30 preceding siblings ...)
  2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 235/251] media: exynos4-is: Fix recursive locking in isp_video_release() Sasha Levin
@ 2020-01-16 17:36 ` Sasha Levin
  2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 249/251] arm64: dts: juno: Fix UART frequency Sasha Levin
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:36 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Greg Kroah-Hartman, Peng Fan, linux-arm-kernel,
	linux-serial

From: Peng Fan <peng.fan@nxp.com>

[ Upstream commit 596fd8dffb745afcebc0ec6968e17fe29f02044c ]

The dmaengine_prep_slave_sg needs to use sg count returned
by dma_map_sg, not use sport->dma_tx_nents, because the return
value of dma_map_sg is not always same with "nents".

Fixes: b4cdc8f61beb ("serial: imx: add DMA support for imx6q")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1573108875-26530-1-git-send-email-peng.fan@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/imx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 6d596c635159..e75bd8d7e6f6 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -548,7 +548,7 @@ static void imx_dma_tx(struct imx_port *sport)
 		dev_err(dev, "DMA mapping error for TX.\n");
 		return;
 	}
-	desc = dmaengine_prep_slave_sg(chan, sgl, sport->dma_tx_nents,
+	desc = dmaengine_prep_slave_sg(chan, sgl, ret,
 					DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
 	if (!desc) {
 		dma_unmap_sg(dev, sgl, sport->dma_tx_nents,
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH AUTOSEL 4.9 249/251] arm64: dts: juno: Fix UART frequency
  2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
                   ` (31 preceding siblings ...)
  2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 240/251] tty: serial: imx: use the sg count from dma_map_sg Sasha Levin
@ 2020-01-16 17:36 ` Sasha Levin
  32 siblings, 0 replies; 34+ messages in thread
From: Sasha Levin @ 2020-01-16 17:36 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, devicetree, Andre Przywara, Liviu Dudau,
	Sudeep Holla, linux-arm-kernel

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit 39a1a8941b27c37f79508426e27a2ec29829d66c ]

Older versions of the Juno *SoC* TRM [1] recommended that the UART clock
source should be 7.2738 MHz, whereas the *system* TRM [2] stated a more
correct value of 7.3728 MHz. Somehow the wrong value managed to end up in
our DT.

Doing a prime factorisation, a modulo divide by 115200 and trying
to buy a 7.2738 MHz crystal at your favourite electronics dealer suggest
that the old value was actually a typo. The actual UART clock is driven
by a PLL, configured via a parameter in some board.txt file in the
firmware, which reads 7.37 MHz (sic!).

Fix this to correct the baud rate divisor calculation on the Juno board.

[1] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0515b.b/DDI0515B_b_juno_arm_development_platform_soc_trm.pdf
[2] http://infocenter.arm.com/help/topic/com.arm.doc.100113_0000_07_en/arm_versatile_express_juno_development_platform_(v2m_juno)_technical_reference_manual_100113_0000_07_en.pdf

Fixes: 71f867ec130e ("arm64: Add Juno board device tree.")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/arm/juno-clocks.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
index 25352ed943e6..00bcbf7688c7 100644
--- a/arch/arm64/boot/dts/arm/juno-clocks.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
@@ -8,10 +8,10 @@
  */
 
 	/* SoC fixed clocks */
-	soc_uartclk: refclk7273800hz {
+	soc_uartclk: refclk7372800hz {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <7273800>;
+		clock-frequency = <7372800>;
 		clock-output-names = "juno:uartclk";
 	};
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

end of thread, back to index

Thread overview: 34+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-16 17:33 [PATCH AUTOSEL 4.9 041/251] media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL Sasha Levin
2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 043/251] ASoC: imx-sgtl5000: put of nodes if finding codec fails Sasha Levin
2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 046/251] clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it Sasha Levin
2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 050/251] ARM: dts: lpc32xx: add required clocks property to keypad device node Sasha Levin
2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 051/251] ARM: dts: lpc32xx: reparent keypad controller to SIC1 Sasha Levin
2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 052/251] ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller variant Sasha Levin
2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 053/251] ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller clocks property Sasha Levin
2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 054/251] ARM: dts: lpc32xx: phy3250: fix SD card regulator voltage Sasha Levin
2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 058/251] thermal: mediatek: fix register index error Sasha Levin
2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 085/251] clocksource/drivers/sun5i: Fail gracefully when clock rate is unavailable Sasha Levin
2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 086/251] clocksource/drivers/exynos_mct: Fix error path in timer resources initialization Sasha Levin
2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 087/251] mmc: sdhci-brcmstb: handle mmc_of_parse() errors during probe Sasha Levin
2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 088/251] ARM: 8847/1: pm: fix HYP/SVC mode mismatch when MCPM is used Sasha Levin
2020-01-16 17:33 ` [PATCH AUTOSEL 4.9 089/251] ARM: 8848/1: virt: Align GIC version check with arm64 counterpart Sasha Levin
2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 104/251] ARM: OMAP2+: Fix potentially uninitialized return value for _setup_reset() Sasha Levin
2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 110/251] soc/fsl/qe: Fix an error code in qe_pin_request() Sasha Levin
2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 111/251] spi: bcm2835aux: fix driver to not allow 65535 (=-1) cs-gpios Sasha Levin
2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 114/251] ARM: pxa: ssp: Fix "WARNING: invalid free of devm_ allocated data" Sasha Levin
2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 118/251] ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect Sasha Levin
2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 138/251] pwm: meson: Don't disable PWM when setting duty repeatedly Sasha Levin
2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 139/251] ARM: riscpc: fix lack of keyboard interrupts after irq conversion Sasha Levin
2020-01-16 17:34 ` [PATCH AUTOSEL 4.9 146/251] serial: stm32: fix transmit_chars when tx is stopped Sasha Levin
2020-01-16 17:35 ` [PATCH AUTOSEL 4.9 184/251] ASoC: sun4i-i2s: RX and TX counter registers are swapped Sasha Levin
2020-01-16 17:35 ` [PATCH AUTOSEL 4.9 205/251] net: stmmac: dwmac-meson8b: Fix signedness bug in probe Sasha Levin
2020-01-16 17:35 ` [PATCH AUTOSEL 4.9 207/251] net: ethernet: stmmac: Fix signedness bug in ipq806x_gmac_of_parse() Sasha Levin
2020-01-16 17:35 ` [PATCH AUTOSEL 4.9 210/251] net: stmmac: gmac4+: Not all Unicast addresses may be available Sasha Levin
2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 214/251] net: stmmac: fix length of PTP clock's name string Sasha Levin
2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 218/251] dmaengine: imx-sdma: fix size check for sdma script_number Sasha Levin
2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 224/251] mt7601u: fix bbp version check in mt7601u_wait_bbp_ready Sasha Levin
2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 229/251] spi: atmel: fix handling of cs_change set on non-last xfer Sasha Levin
2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 232/251] clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume Sasha Levin
2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 235/251] media: exynos4-is: Fix recursive locking in isp_video_release() Sasha Levin
2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 240/251] tty: serial: imx: use the sg count from dma_map_sg Sasha Levin
2020-01-16 17:36 ` [PATCH AUTOSEL 4.9 249/251] arm64: dts: juno: Fix UART frequency Sasha Levin

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git