linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Ludovic Desroches <ludovic.desroches@microchip.com>
To: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Cc: devicetree@vger.kernel.org, alexandre.belloni@bootlin.com,
	kamel.bouhara@bootlin.com, wsa@the-dreams.de,
	linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
	peda@axentia.se, linux@armlinux.org.uk, robh@kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 2/6] i2c: at91: implement i2c bus recovery
Date: Mon, 27 Jan 2020 09:50:49 +0100	[thread overview]
Message-ID: <20200127085049.itsxvqm5dlypzc4x@M43218.corp.atmel.com> (raw)
In-Reply-To: <20200115115422.17097-3-codrin.ciubotariu@microchip.com>

On Wed, Jan 15, 2020 at 01:54:18PM +0200, Codrin Ciubotariu wrote:
> From: Kamel Bouhara <kamel.bouhara@bootlin.com>
> 
> Implement i2c bus recovery when slaves devices might hold SDA low.
> In this case re-assign SCL/SDA to gpios and issue 9 dummy clock pulses
> until the slave release SDA.
> 
> Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>

> ---
> 
> Changes in v3:
>  - removed unnecessary condition from info print;
>  - removed unneded declarations;
> 
> Changes in v2:
>  - called i2c_recover_bus() after an error occurs, if SDA is down;
>  - release gpios if recovery information is incomplete;
> 
>  drivers/i2c/busses/i2c-at91-master.c | 78 ++++++++++++++++++++++++++++
>  drivers/i2c/busses/i2c-at91.h        |  4 ++
>  2 files changed, 82 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
> index 7a862e00b475..0aba51a7df32 100644
> --- a/drivers/i2c/busses/i2c-at91-master.c
> +++ b/drivers/i2c/busses/i2c-at91-master.c
> @@ -18,11 +18,13 @@
>  #include <linux/dma-mapping.h>
>  #include <linux/dmaengine.h>
>  #include <linux/err.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/i2c.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
>  #include <linux/of.h>
>  #include <linux/of_device.h>
> +#include <linux/pinctrl/consumer.h>
>  #include <linux/platform_device.h>
>  #include <linux/platform_data/dma-atmel.h>
>  #include <linux/pm_runtime.h>
> @@ -478,6 +480,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
>  	unsigned long time_left;
>  	bool has_unre_flag = dev->pdata->has_unre_flag;
>  	bool has_alt_cmd = dev->pdata->has_alt_cmd;
> +	struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
>  
>  	/*
>  	 * WARNING: the TXCOMP bit in the Status Register is NOT a clear on
> @@ -637,6 +640,13 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
>  		at91_twi_write(dev, AT91_TWI_CR,
>  			       AT91_TWI_THRCLR | AT91_TWI_LOCKCLR);
>  	}
> +
> +	if (rinfo->get_sda && !(rinfo->get_sda(&dev->adapter))) {
> +		dev_dbg(dev->dev,
> +			"SDA is down; clear bus using gpio\n");
> +		i2c_recover_bus(&dev->adapter);
> +	}
> +
>  	return ret;
>  }
>  
> @@ -806,6 +816,70 @@ static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
>  	return ret;
>  }
>  
> +static void at91_prepare_twi_recovery(struct i2c_adapter *adap)
> +{
> +	struct at91_twi_dev *dev = i2c_get_adapdata(adap);
> +
> +	pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio);
> +}
> +
> +static void at91_unprepare_twi_recovery(struct i2c_adapter *adap)
> +{
> +	struct at91_twi_dev *dev = i2c_get_adapdata(adap);
> +
> +	pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default);
> +}
> +
> +static int at91_init_twi_recovery_info(struct platform_device *pdev,
> +				       struct at91_twi_dev *dev)
> +{
> +	struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
> +
> +	dev->pinctrl = devm_pinctrl_get(&pdev->dev);
> +	if (!dev->pinctrl || IS_ERR(dev->pinctrl)) {
> +		dev_info(dev->dev, "can't get pinctrl, bus recovery not supported\n");
> +		return PTR_ERR(dev->pinctrl);
> +	}
> +
> +	dev->pinctrl_pins_default = pinctrl_lookup_state(dev->pinctrl,
> +							 PINCTRL_STATE_DEFAULT);
> +	dev->pinctrl_pins_gpio = pinctrl_lookup_state(dev->pinctrl,
> +						      "gpio");
> +	rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN);
> +	if (PTR_ERR(rinfo->sda_gpiod) == -EPROBE_DEFER)
> +		return -EPROBE_DEFER;
> +
> +	rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl",
> +					  GPIOD_OUT_HIGH_OPEN_DRAIN);
> +	if (PTR_ERR(rinfo->scl_gpiod) == -EPROBE_DEFER)
> +		return -EPROBE_DEFER;
> +
> +	if (IS_ERR(rinfo->sda_gpiod) ||
> +	    IS_ERR(rinfo->scl_gpiod) ||
> +	    IS_ERR(dev->pinctrl_pins_default) ||
> +	    IS_ERR(dev->pinctrl_pins_gpio)) {
> +		dev_info(&pdev->dev, "recovery information incomplete\n");
> +		if (!IS_ERR(rinfo->sda_gpiod)) {
> +			gpiod_put(rinfo->sda_gpiod);
> +			rinfo->sda_gpiod = NULL;
> +		}
> +		if (!IS_ERR(rinfo->scl_gpiod)) {
> +			gpiod_put(rinfo->scl_gpiod);
> +			rinfo->scl_gpiod = NULL;
> +		}
> +		return -EINVAL;
> +	}
> +
> +	dev_info(&pdev->dev, "using scl, sda for recovery\n");
> +
> +	rinfo->prepare_recovery = at91_prepare_twi_recovery;
> +	rinfo->unprepare_recovery = at91_unprepare_twi_recovery;
> +	rinfo->recover_bus = i2c_generic_scl_recovery;
> +	dev->adapter.bus_recovery_info = rinfo;
> +
> +	return 0;
> +}
> +
>  int at91_twi_probe_master(struct platform_device *pdev,
>  			  u32 phy_addr, struct at91_twi_dev *dev)
>  {
> @@ -838,6 +912,10 @@ int at91_twi_probe_master(struct platform_device *pdev,
>  						     "i2c-analog-filter");
>  	at91_calc_twi_clock(dev);
>  
> +	rc = at91_init_twi_recovery_info(pdev, dev);
> +	if (rc == -EPROBE_DEFER)
> +		return rc;
> +
>  	dev->adapter.algo = &at91_twi_algorithm;
>  	dev->adapter.quirks = &at91_twi_quirks;
>  
> diff --git a/drivers/i2c/busses/i2c-at91.h b/drivers/i2c/busses/i2c-at91.h
> index 977a67bc0f88..f57a6cab96b4 100644
> --- a/drivers/i2c/busses/i2c-at91.h
> +++ b/drivers/i2c/busses/i2c-at91.h
> @@ -151,6 +151,10 @@ struct at91_twi_dev {
>  	u32 fifo_size;
>  	struct at91_twi_dma dma;
>  	bool slave_detected;
> +	struct i2c_bus_recovery_info rinfo;
> +	struct pinctrl *pinctrl;
> +	struct pinctrl_state *pinctrl_pins_default;
> +	struct pinctrl_state *pinctrl_pins_gpio;
>  #ifdef CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL
>  	unsigned smr;
>  	struct i2c_client *slave;
> -- 
> 2.20.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-01-27  8:51 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-15 11:54 [PATCH v3 0/6] i2c bus recovery for Microchip SoCs Codrin Ciubotariu
2020-01-15 11:54 ` [PATCH v3 1/6] dt-bindings: i2c: at91: document optional bus recovery properties Codrin Ciubotariu
2020-01-27  8:49   ` Ludovic Desroches
2020-02-22 11:33   ` Wolfram Sang
2020-01-15 11:54 ` [PATCH v3 2/6] i2c: at91: implement i2c bus recovery Codrin Ciubotariu
2020-01-27  8:50   ` Ludovic Desroches [this message]
2020-02-22 11:33   ` Wolfram Sang
2020-01-15 11:54 ` [PATCH v3 3/6] i2c: at91: Send bus clear command if SDA is down Codrin Ciubotariu
2020-01-27  8:54   ` Ludovic Desroches
2020-02-22 11:44   ` Wolfram Sang
2020-01-15 11:54 ` [PATCH v3 4/6] ARM: at91/dt: sama5d3: add i2c gpio pinctrl Codrin Ciubotariu
2020-01-27  8:55   ` Ludovic Desroches
2020-01-15 11:54 ` [PATCH v3 5/6] ARM: at91/dt: sama5d4: " Codrin Ciubotariu
2020-01-27  8:56   ` Ludovic Desroches
2020-01-15 11:54 ` [PATCH v3 6/6] ARM: at91/dt: sama5d2: " Codrin Ciubotariu
2020-01-27  8:57   ` Ludovic Desroches

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200127085049.itsxvqm5dlypzc4x@M43218.corp.atmel.com \
    --to=ludovic.desroches@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=codrin.ciubotariu@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kamel.bouhara@bootlin.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=peda@axentia.se \
    --cc=robh@kernel.org \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).