Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: "Sasha Levin" <sashal@kernel.org>,
	devicetree@vger.kernel.org,
	"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
	"Karl Rudbæk Olsen" <karl@micro-technic.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 5.4 277/459] ARM: dts: at91: sama5d3: fix maximum peripheral clock rates
Date: Fri, 14 Feb 2020 10:58:47 -0500
Message-ID: <20200214160149.11681-277-sashal@kernel.org> (raw)
In-Reply-To: <20200214160149.11681-1-sashal@kernel.org>

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit ee0aa926ddb0bd8ba59e33e3803b3b5804e3f5da ]

Currently the maximum rate for peripheral clock is calculated based on a
typical 133MHz MCK. The maximum frequency is defined in the datasheet as a
ratio to MCK. Some sama5d3 platforms are using a 166MHz MCK. Update the
device trees to match the maximum rate based on 166MHz.

Reported-by: Karl Rudbæk Olsen <karl@micro-technic.com>
Fixes: d2e8190b7916 ("ARM: at91/dt: define sama5d3 clocks")
Link: https://lore.kernel.org/r/20200110172007.1253659-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/sama5d3.dtsi      | 28 ++++++++++++++--------------
 arch/arm/boot/dts/sama5d3_can.dtsi  |  4 ++--
 arch/arm/boot/dts/sama5d3_uart.dtsi |  4 ++--
 3 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index f770aace0efd6..203d40be70a51 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -1188,49 +1188,49 @@
 					usart0_clk: usart0_clk {
 						#clock-cells = <0>;
 						reg = <12>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					usart1_clk: usart1_clk {
 						#clock-cells = <0>;
 						reg = <13>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					usart2_clk: usart2_clk {
 						#clock-cells = <0>;
 						reg = <14>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					usart3_clk: usart3_clk {
 						#clock-cells = <0>;
 						reg = <15>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					uart0_clk: uart0_clk {
 						#clock-cells = <0>;
 						reg = <16>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					twi0_clk: twi0_clk {
 						reg = <18>;
 						#clock-cells = <0>;
-						atmel,clk-output-range = <0 16625000>;
+						atmel,clk-output-range = <0 41500000>;
 					};
 
 					twi1_clk: twi1_clk {
 						#clock-cells = <0>;
 						reg = <19>;
-						atmel,clk-output-range = <0 16625000>;
+						atmel,clk-output-range = <0 41500000>;
 					};
 
 					twi2_clk: twi2_clk {
 						#clock-cells = <0>;
 						reg = <20>;
-						atmel,clk-output-range = <0 16625000>;
+						atmel,clk-output-range = <0 41500000>;
 					};
 
 					mci0_clk: mci0_clk {
@@ -1246,19 +1246,19 @@
 					spi0_clk: spi0_clk {
 						#clock-cells = <0>;
 						reg = <24>;
-						atmel,clk-output-range = <0 133000000>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 
 					spi1_clk: spi1_clk {
 						#clock-cells = <0>;
 						reg = <25>;
-						atmel,clk-output-range = <0 133000000>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 
 					tcb0_clk: tcb0_clk {
 						#clock-cells = <0>;
 						reg = <26>;
-						atmel,clk-output-range = <0 133000000>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 
 					pwm_clk: pwm_clk {
@@ -1269,7 +1269,7 @@
 					adc_clk: adc_clk {
 						#clock-cells = <0>;
 						reg = <29>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					dma0_clk: dma0_clk {
@@ -1300,13 +1300,13 @@
 					ssc0_clk: ssc0_clk {
 						#clock-cells = <0>;
 						reg = <38>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					ssc1_clk: ssc1_clk {
 						#clock-cells = <0>;
 						reg = <39>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					sha_clk: sha_clk {
diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi
index cf06a018ed0f2..2470dd3fff25e 100644
--- a/arch/arm/boot/dts/sama5d3_can.dtsi
+++ b/arch/arm/boot/dts/sama5d3_can.dtsi
@@ -36,13 +36,13 @@
 					can0_clk: can0_clk {
 						#clock-cells = <0>;
 						reg = <40>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					can1_clk: can1_clk {
 						#clock-cells = <0>;
 						reg = <41>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 				};
 			};
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
index 4316bdbdc25dd..cb62adbd28ed6 100644
--- a/arch/arm/boot/dts/sama5d3_uart.dtsi
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -41,13 +41,13 @@
 					uart0_clk: uart0_clk {
 						#clock-cells = <0>;
 						reg = <16>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					uart1_clk: uart1_clk {
 						#clock-cells = <0>;
 						reg = <17>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 				};
 			};
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200214160149.11681-1-sashal@kernel.org>
2020-02-14 15:54 ` [PATCH AUTOSEL 5.4 009/459] soc: fsl: qe: change return type of cpm_muram_alloc() to s32 Sasha Levin
2020-02-14 15:54 ` [PATCH AUTOSEL 5.4 013/459] crypto: testmgr - don't try to decrypt uninitialized buffers Sasha Levin
2020-02-14 15:54 ` [PATCH AUTOSEL 5.4 015/459] media: meson: add missing allocation failure check on new_buf Sasha Levin
2020-02-14 15:54 ` [PATCH AUTOSEL 5.4 016/459] clk: meson: g12a: fix missing uart2 in regmap table Sasha Levin
2020-02-14 15:54 ` [PATCH AUTOSEL 5.4 017/459] clk: meson: pll: Fix by 0 division in __pll_params_to_rate() Sasha Levin
2020-02-14 15:54 ` [PATCH AUTOSEL 5.4 037/459] media: sun4i-csi: Deal with DRAM offset Sasha Levin
2020-02-14 15:54 ` [PATCH AUTOSEL 5.4 038/459] media: sun4i-csi: Fix data sampling polarity handling Sasha Levin
2020-02-14 15:54 ` [PATCH AUTOSEL 5.4 040/459] media: sun4i-csi: Fix [HV]sync " Sasha Levin
2020-02-14 15:54 ` [PATCH AUTOSEL 5.4 041/459] clk: at91: sam9x60: fix programmable clock prescaler Sasha Levin
2020-02-14 15:54 ` [PATCH AUTOSEL 5.4 043/459] clk: meson: meson8b: make the CCF use the glitch-free mali mux Sasha Levin
2020-02-14 15:55 ` [PATCH AUTOSEL 5.4 050/459] arm64: dts: marvell: clearfog-gt-8k: fix switch cpu port node Sasha Levin
2020-02-14 15:55 ` [PATCH AUTOSEL 5.4 064/459] arm64: cpufeature: Fix the type of no FP/SIMD capability Sasha Levin
2020-02-14 15:55 ` [PATCH AUTOSEL 5.4 069/459] clocksource/drivers/bcm2835_timer: Fix memory leak of timer Sasha Levin
2020-02-14 15:55 ` [PATCH AUTOSEL 5.4 079/459] scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails Sasha Levin
2020-02-14 15:55 ` [PATCH AUTOSEL 5.4 090/459] ARM: 8952/1: Disable kmemleak on XIP kernels Sasha Levin
2020-02-14 15:55 ` [PATCH AUTOSEL 5.4 097/459] drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe Sasha Levin
2020-02-14 15:56 ` [PATCH AUTOSEL 5.4 148/459] arm64: dts: rockchip: Fix NanoPC-T4 cooling maps Sasha Levin
2020-02-14 15:56 ` [PATCH AUTOSEL 5.4 150/459] arm64: dts: uDPU: fix broken ethernet Sasha Levin
2020-02-14 15:56 ` [PATCH AUTOSEL 5.4 159/459] arm64: dts: allwinner: H6: Add PMU mode Sasha Levin
2020-02-14 15:56 ` [PATCH AUTOSEL 5.4 160/459] arm64: dts: allwinner: H5: Add PMU node Sasha Levin
2020-02-14 15:56 ` [PATCH AUTOSEL 5.4 161/459] arm: dts: allwinner: H3: " Sasha Levin
2020-02-14 15:56 ` [PATCH AUTOSEL 5.4 163/459] ARM: dts: at91: Reenable UART TX pull-ups Sasha Levin
2020-02-14 15:57 ` [PATCH AUTOSEL 5.4 171/459] clk: imx: Add correct failure handling for clk based helpers Sasha Levin
2020-02-14 15:57 ` [PATCH AUTOSEL 5.4 172/459] ARM: exynos_defconfig: Bring back explicitly wanted options Sasha Levin
2020-02-14 15:57 ` [PATCH AUTOSEL 5.4 173/459] ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3 Sasha Levin
2020-02-14 15:57 ` [PATCH AUTOSEL 5.4 174/459] ARM: dts: imx6: rdu2: Limit USBH1 to Full Speed Sasha Levin
2020-02-14 15:57 ` [PATCH AUTOSEL 5.4 177/459] PCI: iproc: Apply quirk_paxc_bridge() for module as well as built-in Sasha Levin
2020-02-14 15:57 ` [PATCH AUTOSEL 5.4 190/459] ARM: OMAP2+: pdata-quirks: add PRM data for reset support Sasha Levin
2020-02-14 15:57 ` [PATCH AUTOSEL 5.4 191/459] ARM: OMAP2+: Add workaround for DRA7 DSP MStandby errata i879 Sasha Levin
2020-02-14 18:32   ` Suman Anna
2020-02-14 15:57 ` [PATCH AUTOSEL 5.4 192/459] ARM: OMAP2+: use separate IOMMU pdata to fix DRA7 IPU1 boot Sasha Levin
2020-02-14 18:33   ` Suman Anna
2020-02-14 15:57 ` [PATCH AUTOSEL 5.4 195/459] Revert "tty/serial: atmel: fix out of range clock divider handling" Sasha Levin
2020-02-14 15:57 ` [PATCH AUTOSEL 5.4 212/459] drm/mediatek: handle events when enabling/disabling crtc Sasha Levin
2020-02-14 15:57 ` [PATCH AUTOSEL 5.4 226/459] dmaengine: imx-sdma: Fix memory leak Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 232/459] PM / devfreq: exynos-ppmu: Fix excessive stack usage Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 237/459] reset: uniphier: Add SCSSI reset control for each channel Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 241/459] clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 244/459] clk: uniphier: Add SCSSI clock gate for each channel Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 261/459] ARM: dts: meson8: use the actual frequency for the GPU's 182.1MHz OPP Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 262/459] ARM: dts: meson8b: use the actual frequency for the GPU's 364MHz OPP Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 263/459] soc: fsl: qe: remove set but not used variable 'mm_gc' Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 265/459] crypto: atmel-sha - fix error handling when setting hmac key Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 267/459] ARM: dts: stm32: Add power-supply for DSI panel on stm32f469-disco Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 270/459] drm/mediatek: Add gamma property according to hardware capability Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 271/459] iommu/arm-smmu-v3: Populate VMID field for CMDQ_OP_TLBI_NH_VA Sasha Levin
2020-02-14 15:58 ` Sasha Levin [this message]
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 278/459] ARM: dts: at91: sama5d3: define clock rate range for tcb1 Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 281/459] ARM: at91: pm: use SAM9X60 PMC's compatible Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 282/459] ARM: at91: pm: use of_device_id array to find the proper shdwc node Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 288/459] arm64: dts: rockchip: fix dwmmc clock name for px30 Sasha Levin
2020-02-14 15:58 ` [PATCH AUTOSEL 5.4 289/459] arm64: dts: rockchip: add reg property to brcmf sub-nodes Sasha Levin
2020-02-14 15:59 ` [PATCH AUTOSEL 5.4 290/459] ARM: dts: rockchip: add reg property to brcmf sub node for rk3188-bqedison2qc Sasha Levin
2020-02-14 15:59 ` [PATCH AUTOSEL 5.4 292/459] ASoC: atmel: fix build error with CONFIG_SND_ATMEL_SOC_DMA=m Sasha Levin
2020-02-14 15:59 ` [PATCH AUTOSEL 5.4 299/459] misc: xilinx_sdfec: fix xsdfec_poll()'s return type Sasha Levin
2020-02-15 20:52   ` Dragan Cvetic
2020-02-14 15:59 ` [PATCH AUTOSEL 5.4 305/459] arm64: cpufeature: Set the FP/SIMD compat HWCAP bits properly Sasha Levin
2020-02-14 15:59 ` [PATCH AUTOSEL 5.4 306/459] arm64: ptrace: nofpsimd: Fail FP/SIMD regset operations Sasha Levin
2020-02-14 15:59 ` [PATCH AUTOSEL 5.4 317/459] perf/imx_ddr: Fix cpu hotplug state cleanup Sasha Levin
2020-02-14 15:59 ` [PATCH AUTOSEL 5.4 322/459] iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE Sasha Levin
2020-02-14 15:59 ` [PATCH AUTOSEL 5.4 327/459] scsi: ufs: pass device information to apply_dev_quirks Sasha Levin
2020-02-14 15:59 ` [PATCH AUTOSEL 5.4 328/459] scsi: ufs-mediatek: add apply_dev_quirks variant operation Sasha Levin
2020-02-14 15:59 ` [PATCH AUTOSEL 5.4 334/459] arm64: lse: fix LSE atomics with LLVM's integrated assembler Sasha Levin
2020-02-14 15:59 ` [PATCH AUTOSEL 5.4 335/459] arm64: fix alternatives " Sasha Levin
2020-02-14 15:59 ` [PATCH AUTOSEL 5.4 342/459] arm64: dts: ti: k3-j721e-main: Add missing power-domains for smmu Sasha Levin
2020-02-14 15:59 ` [PATCH AUTOSEL 5.4 347/459] ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map() Sasha Levin
2020-02-14 16:00 ` [PATCH AUTOSEL 5.4 402/459] ARM: 8949/1: mm: mark free_memmap as __init Sasha Levin
2020-02-14 16:00 ` [PATCH AUTOSEL 5.4 403/459] ARM: 8951/1: Fix Kexec compilation issue Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200214160149.11681-277-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=karl@micro-technic.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git