linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>,
	Maxime Ripard <maxime@cerno.tech>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH AUTOSEL 4.19 127/252] clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock
Date: Fri, 14 Feb 2020 11:09:42 -0500	[thread overview]
Message-ID: <20200214161147.15842-127-sashal@kernel.org> (raw)
In-Reply-To: <20200214161147.15842-1-sashal@kernel.org>

From: Icenowy Zheng <icenowy@aosc.io>

[ Upstream commit ec97faff743b398e21f74a54c81333f3390093aa ]

The A64 PLL_CPU clock has the same instability if some factor changed
without the PLL gated like other SoCs with sun6i-style CCU, e.g. A33,
H3.

Add the mux and pll notifiers for A64 CPU clock to workaround the
problem.

Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 28 ++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index dec4a130390a3..9ac6c299e0744 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -901,11 +901,26 @@ static const struct sunxi_ccu_desc sun50i_a64_ccu_desc = {
 	.num_resets	= ARRAY_SIZE(sun50i_a64_ccu_resets),
 };
 
+static struct ccu_pll_nb sun50i_a64_pll_cpu_nb = {
+	.common	= &pll_cpux_clk.common,
+	/* copy from pll_cpux_clk */
+	.enable	= BIT(31),
+	.lock	= BIT(28),
+};
+
+static struct ccu_mux_nb sun50i_a64_cpu_nb = {
+	.common		= &cpux_clk.common,
+	.cm		= &cpux_clk.mux,
+	.delay_us	= 1, /* > 8 clock cycles at 24 MHz */
+	.bypass_index	= 1, /* index of 24 MHz oscillator */
+};
+
 static int sun50i_a64_ccu_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	void __iomem *reg;
 	u32 val;
+	int ret;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	reg = devm_ioremap_resource(&pdev->dev, res);
@@ -919,7 +934,18 @@ static int sun50i_a64_ccu_probe(struct platform_device *pdev)
 
 	writel(0x515, reg + SUN50I_A64_PLL_MIPI_REG);
 
-	return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc);
+	ret = sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc);
+	if (ret)
+		return ret;
+
+	/* Gate then ungate PLL CPU after any rate changes */
+	ccu_pll_notifier_register(&sun50i_a64_pll_cpu_nb);
+
+	/* Reparent CPU during PLL CPU rate changes */
+	ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
+				  &sun50i_a64_cpu_nb);
+
+	return 0;
 }
 
 static const struct of_device_id sun50i_a64_ccu_ids[] = {
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-02-14 17:01 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200214161147.15842-1-sashal@kernel.org>
2020-02-14 16:07 ` [PATCH AUTOSEL 4.19 004/252] soc: fsl: qe: change return type of cpm_muram_alloc() to s32 Sasha Levin
2020-02-14 16:08 ` [PATCH AUTOSEL 4.19 028/252] arm64: cpufeature: Fix the type of no FP/SIMD capability Sasha Levin
2020-02-14 16:08 ` [PATCH AUTOSEL 4.19 032/252] clocksource/drivers/bcm2835_timer: Fix memory leak of timer Sasha Levin
2020-02-14 16:08 ` [PATCH AUTOSEL 4.19 037/252] scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails Sasha Levin
2020-02-14 16:08 ` [PATCH AUTOSEL 4.19 044/252] ARM: 8952/1: Disable kmemleak on XIP kernels Sasha Levin
2020-02-14 16:08 ` [PATCH AUTOSEL 4.19 081/252] arm64: dts: allwinner: H6: Add PMU mode Sasha Levin
2020-02-14 16:08 ` [PATCH AUTOSEL 4.19 082/252] arm: dts: allwinner: H3: Add PMU node Sasha Levin
2020-02-14 16:08 ` [PATCH AUTOSEL 4.19 083/252] ARM: dts: at91: Reenable UART TX pull-ups Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 088/252] ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3 Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 089/252] ARM: dts: imx6: rdu2: Limit USBH1 to Full Speed Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 091/252] PCI: iproc: Apply quirk_paxc_bridge() for module as well as built-in Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 102/252] Revert "tty/serial: atmel: fix out of range clock divider handling" Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 113/252] drm/mediatek: handle events when enabling/disabling crtc Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 118/252] dmaengine: imx-sdma: Fix memory leak Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 125/252] reset: uniphier: Add SCSSI reset control for each channel Sasha Levin
2020-02-14 16:09 ` Sasha Levin [this message]
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 129/252] clk: uniphier: Add SCSSI clock gate " Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 137/252] soc: fsl: qe: remove set but not used variable 'mm_gc' Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 139/252] crypto: atmel-sha - fix error handling when setting hmac key Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 140/252] ARM: dts: stm32: Add power-supply for DSI panel on stm32f469-disco Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 143/252] iommu/arm-smmu-v3: Populate VMID field for CMDQ_OP_TLBI_NH_VA Sasha Levin
2020-02-14 16:10 ` [PATCH AUTOSEL 4.19 148/252] ARM: dts: at91: sama5d3: fix maximum peripheral clock rates Sasha Levin
2020-02-14 16:10 ` [PATCH AUTOSEL 4.19 149/252] ARM: dts: at91: sama5d3: define clock rate range for tcb1 Sasha Levin
2020-02-14 16:10 ` [PATCH AUTOSEL 4.19 155/252] ASoC: atmel: fix build error with CONFIG_SND_ATMEL_SOC_DMA=m Sasha Levin
2020-02-14 16:10 ` [PATCH AUTOSEL 4.19 165/252] arm64: ptrace: nofpsimd: Fail FP/SIMD regset operations Sasha Levin
2020-02-14 16:10 ` [PATCH AUTOSEL 4.19 177/252] iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE Sasha Levin
2020-02-14 16:10 ` [PATCH AUTOSEL 4.19 181/252] arm64: fix alternatives with LLVM's integrated assembler Sasha Levin
2020-02-14 16:10 ` [PATCH AUTOSEL 4.19 186/252] ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map() Sasha Levin
2020-02-14 16:11 ` [PATCH AUTOSEL 4.19 218/252] ARM: 8951/1: Fix Kexec compilation issue Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200214161147.15842-127-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=icenowy@aosc.io \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxime@cerno.tech \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).