Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>,
	Andre Przywara <andre.przywara@arm.com>,
	Maxime Ripard <maxime@cerno.tech>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 082/252] arm: dts: allwinner: H3: Add PMU node
Date: Fri, 14 Feb 2020 11:08:57 -0500
Message-ID: <20200214161147.15842-82-sashal@kernel.org> (raw)
In-Reply-To: <20200214161147.15842-1-sashal@kernel.org>

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit 0388a110747bec0c9d9de995842bb2a03a26aae1 ]

Add the Performance Monitoring Unit (PMU) device tree node to the H3
.dtsi, which tells DT users which interrupts are triggered by PMU
overflow events on each core. The numbers come from the manual and have
been checked in U-Boot and with perf in Linux.

Tested with perf record and taskset on an OrangePi Zero.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/sun8i-h3.dtsi | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 9233ba30a857c..11172fbdc03aa 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -80,7 +80,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
@@ -90,7 +90,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
@@ -100,7 +100,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
@@ -111,6 +111,15 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200214161147.15842-1-sashal@kernel.org>
2020-02-14 16:07 ` [PATCH AUTOSEL 4.19 004/252] soc: fsl: qe: change return type of cpm_muram_alloc() to s32 Sasha Levin
2020-02-14 16:08 ` [PATCH AUTOSEL 4.19 028/252] arm64: cpufeature: Fix the type of no FP/SIMD capability Sasha Levin
2020-02-14 16:08 ` [PATCH AUTOSEL 4.19 032/252] clocksource/drivers/bcm2835_timer: Fix memory leak of timer Sasha Levin
2020-02-14 16:08 ` [PATCH AUTOSEL 4.19 037/252] scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails Sasha Levin
2020-02-14 16:08 ` [PATCH AUTOSEL 4.19 044/252] ARM: 8952/1: Disable kmemleak on XIP kernels Sasha Levin
2020-02-14 16:08 ` [PATCH AUTOSEL 4.19 081/252] arm64: dts: allwinner: H6: Add PMU mode Sasha Levin
2020-02-14 16:08 ` Sasha Levin [this message]
2020-02-14 16:08 ` [PATCH AUTOSEL 4.19 083/252] ARM: dts: at91: Reenable UART TX pull-ups Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 088/252] ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3 Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 089/252] ARM: dts: imx6: rdu2: Limit USBH1 to Full Speed Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 091/252] PCI: iproc: Apply quirk_paxc_bridge() for module as well as built-in Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 102/252] Revert "tty/serial: atmel: fix out of range clock divider handling" Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 113/252] drm/mediatek: handle events when enabling/disabling crtc Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 118/252] dmaengine: imx-sdma: Fix memory leak Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 125/252] reset: uniphier: Add SCSSI reset control for each channel Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 127/252] clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 129/252] clk: uniphier: Add SCSSI clock gate for each channel Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 137/252] soc: fsl: qe: remove set but not used variable 'mm_gc' Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 139/252] crypto: atmel-sha - fix error handling when setting hmac key Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 140/252] ARM: dts: stm32: Add power-supply for DSI panel on stm32f469-disco Sasha Levin
2020-02-14 16:09 ` [PATCH AUTOSEL 4.19 143/252] iommu/arm-smmu-v3: Populate VMID field for CMDQ_OP_TLBI_NH_VA Sasha Levin
2020-02-14 16:10 ` [PATCH AUTOSEL 4.19 148/252] ARM: dts: at91: sama5d3: fix maximum peripheral clock rates Sasha Levin
2020-02-14 16:10 ` [PATCH AUTOSEL 4.19 149/252] ARM: dts: at91: sama5d3: define clock rate range for tcb1 Sasha Levin
2020-02-14 16:10 ` [PATCH AUTOSEL 4.19 155/252] ASoC: atmel: fix build error with CONFIG_SND_ATMEL_SOC_DMA=m Sasha Levin
2020-02-14 16:10 ` [PATCH AUTOSEL 4.19 165/252] arm64: ptrace: nofpsimd: Fail FP/SIMD regset operations Sasha Levin
2020-02-14 16:10 ` [PATCH AUTOSEL 4.19 177/252] iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE Sasha Levin
2020-02-14 16:10 ` [PATCH AUTOSEL 4.19 181/252] arm64: fix alternatives with LLVM's integrated assembler Sasha Levin
2020-02-14 16:10 ` [PATCH AUTOSEL 4.19 186/252] ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map() Sasha Levin
2020-02-14 16:11 ` [PATCH AUTOSEL 4.19 218/252] ARM: 8951/1: Fix Kexec compilation issue Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200214161147.15842-82-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=andre.przywara@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxime@cerno.tech \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git