From: Andrey Lebedev <andrey.lebedev@gmail.com>
To: Maxime Ripard <maxime@cerno.tech>
Cc: airlied@linux.ie, linux-sunxi@googlegroups.com,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Andrey Lebedev <andrey@lebedev.lt>,
wens@csie.org, daniel@ffwll.ch,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 2/2] ARM: sun7i: dts: Add LVDS panel support on A20
Date: Tue, 18 Feb 2020 19:50:33 +0200 [thread overview]
Message-ID: <20200218175033.GA25850@kedthinkpad> (raw)
In-Reply-To: <20200217175135.ldtqji4mrwz2wbn5@gilmour.lan>
On Mon, Feb 17, 2020 at 06:51:35PM +0100, Maxime Ripard wrote:
> > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h
> > index cfbf4e6c1679..bc87d28ee341 100644
> > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.h
> > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h
> > @@ -235,6 +235,8 @@ struct sun4i_tcon_quirks {
> > bool needs_de_be_mux; /* sun6i needs mux to select backend */
> > bool needs_edp_reset; /* a80 edp reset needed for tcon0 access */
> > bool supports_lvds; /* Does the TCON support an LVDS output? */
> > + /* "compatible" string of TCON that exclusively supports LVDS */
> > + const char *lvds_compatible_tcon;
>
> However this is far more complicated than needed, you can simply add a
> new quirks structure associated to the tcon0 compatible in
> sun4i_tcon_of_table, and that will do
Aha! Does this look good to you?
From 4ad2978e404c63d4cca1b7890bc5bdd4d1e8965d Mon Sep 17 00:00:00 2001
From: Andrey Lebedev <andrey@lebedev.lt>
Date: Tue, 18 Feb 2020 19:47:33 +0200
Subject: [PATCH] Mark tcon0 to be the only tcon capable of LVDS on sun7i-a20
This allows to avoid warnings about reset line not provided for tcon1.
Signed-off-by: Andrey Lebedev <andrey@lebedev.lt>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 6 ++++--
drivers/gpu/drm/sun4i/sun4i_tcon.c | 14 ++++++++++++--
2 files changed, 16 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index dc4f3f249aee..d50263c1ca9a 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -405,7 +405,8 @@
};
tcon0: lcd-controller@1c0c000 {
- compatible = "allwinner,sun7i-a20-tcon";
+ compatible = "allwinner,sun7i-a20-tcon0",
+ "allwinner,sun7i-a20-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>;
@@ -460,7 +461,8 @@
};
tcon1: lcd-controller@1c0d000 {
- compatible = "allwinner,sun7i-a20-tcon";
+ compatible = "allwinner,sun7i-a20-tcon1",
+ "allwinner,sun7i-a20-tcon";
reg = <0x01c0d000 0x1000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
resets = <&ccu RST_TCON1>;
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 800a9bd86112..d9605d331010 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -1479,7 +1479,7 @@ static const struct sun4i_tcon_quirks sun6i_a31s_quirks = {
.dclk_min_div = 1,
};
-static const struct sun4i_tcon_quirks sun7i_a20_quirks = {
+static const struct sun4i_tcon_quirks sun7i_a20_tcon0_quirks = {
.supports_lvds = true,
.has_channel_0 = true,
.has_channel_1 = true,
@@ -1489,6 +1489,15 @@ static const struct sun4i_tcon_quirks sun7i_a20_quirks = {
.setup_lvds_phy = sun4i_tcon_setup_lvds_phy,
};
+static const struct sun4i_tcon_quirks sun7i_a20_tcon1_quirks = {
+ .supports_lvds = false,
+ .has_channel_0 = true,
+ .has_channel_1 = true,
+ .dclk_min_div = 4,
+ /* Same display pipeline structure as A10 */
+ .set_mux = sun4i_a10_tcon_set_mux,
+};
+
static const struct sun4i_tcon_quirks sun8i_a33_quirks = {
.has_channel_0 = true,
.has_lvds_alt = true,
@@ -1534,7 +1543,8 @@ const struct of_device_id sun4i_tcon_of_table[] = {
{ .compatible = "allwinner,sun5i-a13-tcon", .data = &sun5i_a13_quirks },
{ .compatible = "allwinner,sun6i-a31-tcon", .data = &sun6i_a31_quirks },
{ .compatible = "allwinner,sun6i-a31s-tcon", .data = &sun6i_a31s_quirks },
- { .compatible = "allwinner,sun7i-a20-tcon", .data = &sun7i_a20_quirks },
+ { .compatible = "allwinner,sun7i-a20-tcon0", .data = &sun7i_a20_tcon0_quirks },
+ { .compatible = "allwinner,sun7i-a20-tcon1", .data = &sun7i_a20_tcon1_quirks },
{ .compatible = "allwinner,sun8i-a23-tcon", .data = &sun8i_a33_quirks },
{ .compatible = "allwinner,sun8i-a33-tcon", .data = &sun8i_a33_quirks },
{ .compatible = "allwinner,sun8i-a83t-tcon-lcd", .data = &sun8i_a83t_lcd_quirks },
--
2.20.1
--
Andrey Lebedev aka -.- . -.. -.. . .-.
Software engineer
Homepage: http://lebedev.lt/
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-02-18 17:50 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-10 19:56 [PATCH 1/1] Support LVDS output on Allwinner A20 Andrey Lebedev
2020-02-11 7:20 ` Maxime Ripard
2020-02-11 20:48 ` Andrey Lebedev
2020-02-12 12:53 ` Maxime Ripard
2020-02-12 22:46 ` Andrey Lebedev
2020-02-13 9:24 ` Maxime Ripard
2020-02-13 18:11 ` Andrey Lebedev
2020-02-14 7:58 ` Maxime Ripard
2020-02-12 22:23 ` [PATCH v2 1/2] ARM: sun7i: " andrey.lebedev
2020-02-13 9:32 ` Maxime Ripard
2020-02-12 22:23 ` [PATCH v2 2/2] ARM: sun7i: dts: Add LVDS panel support on A20 andrey.lebedev
2020-02-13 9:43 ` Maxime Ripard
2020-02-13 20:08 ` Andrey Lebedev
2020-02-14 7:52 ` Maxime Ripard
2020-02-14 8:43 ` Andrey Lebedev
2020-02-14 8:53 ` Maxime Ripard
2020-02-14 21:32 ` Andrey Lebedev
2020-02-17 17:51 ` Maxime Ripard
2020-02-18 17:50 ` Andrey Lebedev [this message]
2020-02-19 12:06 ` Maxime Ripard
2020-02-13 20:18 ` [PATCH v3 1/3] drm/sun4i: tcon: Introduce LVDS setup routine setting Andrey Lebedev
2020-02-13 20:18 ` [PATCH v3 2/3] drm/sun4i: tcon: Support LVDS output on Allwinner A20 Andrey Lebedev
2020-02-13 20:18 ` [PATCH v3 3/3] ARM: dts: sun7i: Add LVDS panel support on A20 Andrey Lebedev
2020-02-14 8:55 ` Maxime Ripard
2020-02-19 18:08 ` PATCH v4 Andrey Lebedev
2020-02-19 18:08 ` [PATCH 1/5] drm/sun4i: tcon: Introduce LVDS setup routine setting Andrey Lebedev
2020-02-20 17:21 ` Maxime Ripard
2020-02-20 18:19 ` Andrey Lebedev
2020-02-19 18:08 ` [PATCH 2/5] drm/sun4i: tcon: Separate quirks for tcon0 and tcon1 on A20 Andrey Lebedev
2020-02-20 17:22 ` Maxime Ripard
2020-02-19 18:08 ` [PATCH 3/5] ARM: dts: sun7i: Add LVDS panel support " Andrey Lebedev
2020-02-20 17:23 ` Maxime Ripard
2020-02-19 18:08 ` [PATCH 4/5] dt-bindings: display: sun4i: New compatibles for A20 tcons Andrey Lebedev
2020-02-20 17:24 ` Maxime Ripard
2020-02-19 18:08 ` [PATCH 5/5] drm/sun4i: tcon: Support LVDS output on Allwinner A20 Andrey Lebedev
2020-02-20 17:25 ` Maxime Ripard
2020-04-01 10:59 ` Andrey Lebedev
2020-04-01 12:14 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200218175033.GA25850@kedthinkpad \
--to=andrey.lebedev@gmail.com \
--cc=airlied@linux.ie \
--cc=andrey@lebedev.lt \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime@cerno.tech \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).