linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 0/5] perf cs-etm: Fix synthesizing instruction samples
@ 2020-02-13  9:41 Leo Yan
  2020-02-13  9:42 ` [PATCH v4 1/5] perf cs-etm: Swap packets for " Leo Yan
                   ` (6 more replies)
  0 siblings, 7 replies; 13+ messages in thread
From: Leo Yan @ 2020-02-13  9:41 UTC (permalink / raw)
  To: Arnaldo Carvalho de Melo, Mathieu Poirier, Suzuki K Poulose,
	Mike Leach, Robert Walker, Peter Zijlstra, Ingo Molnar,
	Mark Rutland, Alexander Shishkin, Jiri Olsa, Namhyung Kim,
	linux-arm-kernel, linux-kernel, Coresight ML
  Cc: Leo Yan

This patch series is to address issues for synthesizing instruction
samples, especially when the instruction sample period is small enough,
the current logic cannot synthesize multiple instruction samples within
one instruction range packet.

Patch 0001 is to swap packets for instruction samples, so this allow
option '--itrace=iNNN' can work well.

Patch 0002 avoids to reset the last branches for every instruction
sample; if reset the last branches for every time generating sample, the
later samples in the same range packet cannot use the last branches
anymore.

Patch 0003 is the fixing for handling different instruction periods,
especially for small sample period.

Patch 0004 is an optimization for copying last branches; it only copies
last branches once if the instruction samples share the same last
branches.

Patch 0005 is a minor fix for unsigned variable comparison to zero.

This patch set has been rebased on the latest perf/core branch; and
verified on Juno board with below commands:

  # perf script --itrace=i2
  # perf script --itrace=i2il16
  # perf inject --itrace=i2il16 -i perf.data -o perf.data.new
  # perf inject --itrace=i100il16 -i perf.data -o perf.data.new

Changes from v3:
* Refactored patch 0001 with new function cs_etm__packet_swap() (Mike);
* Refined instruction sample generation flow with single while loop,
  which completely uses Mike's suggestions (Mike);
* Added Mike's review tags for patch 01/02/04/05.

Changes from v2:
* Added patch 0001 which is to fix swapping packets for instruction
  samples;
* Refined minor commit logs and comments;
* Rebased on the latest perf/core branch.

Changes from v1:
* Rebased patch set on perf/core branch with latest commit 9fec3cd5fa4a
  ("perf map: Check if the map still has some refcounts on exit").



Leo Yan (5):
  perf cs-etm: Swap packets for instruction samples
  perf cs-etm: Continuously record last branch
  perf cs-etm: Correct synthesizing instruction samples
  perf cs-etm: Optimize copying last branches
  perf cs-etm: Fix unsigned variable comparison to zero

 tools/perf/util/cs-etm.c | 157 +++++++++++++++++++++++++++------------
 1 file changed, 111 insertions(+), 46 deletions(-)

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v4 1/5] perf cs-etm: Swap packets for instruction samples
  2020-02-13  9:41 [PATCH v4 0/5] perf cs-etm: Fix synthesizing instruction samples Leo Yan
@ 2020-02-13  9:42 ` Leo Yan
  2020-02-13  9:42 ` [PATCH v4 2/5] perf cs-etm: Continuously record last branch Leo Yan
                   ` (5 subsequent siblings)
  6 siblings, 0 replies; 13+ messages in thread
From: Leo Yan @ 2020-02-13  9:42 UTC (permalink / raw)
  To: Arnaldo Carvalho de Melo, Mathieu Poirier, Suzuki K Poulose,
	Mike Leach, Robert Walker, Peter Zijlstra, Ingo Molnar,
	Mark Rutland, Alexander Shishkin, Jiri Olsa, Namhyung Kim,
	linux-arm-kernel, linux-kernel, Coresight ML
  Cc: Leo Yan

If use option '--itrace=iNNN' with Arm CoreSight trace data, perf tool
fails inject instruction samples; the root cause is the packets are
only swapped for branch samples and last branches but not for
instruction samples, so the new coming packets cannot be properly
handled for only synthesizing instruction samples.

To fix this issue, this patch refactors the code with a new function
cs_etm__packet_swap() which is used to swap packets and adds the
condition for instruction samples.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
---
 tools/perf/util/cs-etm.c | 39 +++++++++++++++++++--------------------
 1 file changed, 19 insertions(+), 20 deletions(-)

diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
index 5471045ebf5c..84f30c2de185 100644
--- a/tools/perf/util/cs-etm.c
+++ b/tools/perf/util/cs-etm.c
@@ -363,6 +363,23 @@ struct cs_etm_packet_queue
 	return NULL;
 }
 
+static void cs_etm__packet_swap(struct cs_etm_auxtrace *etm,
+				struct cs_etm_traceid_queue *tidq)
+{
+	struct cs_etm_packet *tmp;
+
+	if (etm->sample_branches || etm->synth_opts.last_branch ||
+	    etm->sample_instructions) {
+		/*
+		 * Swap PACKET with PREV_PACKET: PACKET becomes PREV_PACKET for
+		 * the next incoming packet.
+		 */
+		tmp = tidq->packet;
+		tidq->packet = tidq->prev_packet;
+		tidq->prev_packet = tmp;
+	}
+}
+
 static void cs_etm__packet_dump(const char *pkt_string)
 {
 	const char *color = PERF_COLOR_BLUE;
@@ -1340,7 +1357,6 @@ static int cs_etm__sample(struct cs_etm_queue *etmq,
 			  struct cs_etm_traceid_queue *tidq)
 {
 	struct cs_etm_auxtrace *etm = etmq->etm;
-	struct cs_etm_packet *tmp;
 	int ret;
 	u8 trace_chan_id = tidq->trace_chan_id;
 	u64 instrs_executed = tidq->packet->instr_count;
@@ -1404,15 +1420,7 @@ static int cs_etm__sample(struct cs_etm_queue *etmq,
 		}
 	}
 
-	if (etm->sample_branches || etm->synth_opts.last_branch) {
-		/*
-		 * Swap PACKET with PREV_PACKET: PACKET becomes PREV_PACKET for
-		 * the next incoming packet.
-		 */
-		tmp = tidq->packet;
-		tidq->packet = tidq->prev_packet;
-		tidq->prev_packet = tmp;
-	}
+	cs_etm__packet_swap(etm, tidq);
 
 	return 0;
 }
@@ -1441,7 +1449,6 @@ static int cs_etm__flush(struct cs_etm_queue *etmq,
 {
 	int err = 0;
 	struct cs_etm_auxtrace *etm = etmq->etm;
-	struct cs_etm_packet *tmp;
 
 	/* Handle start tracing packet */
 	if (tidq->prev_packet->sample_type == CS_ETM_EMPTY)
@@ -1476,15 +1483,7 @@ static int cs_etm__flush(struct cs_etm_queue *etmq,
 	}
 
 swap_packet:
-	if (etm->sample_branches || etm->synth_opts.last_branch) {
-		/*
-		 * Swap PACKET with PREV_PACKET: PACKET becomes PREV_PACKET for
-		 * the next incoming packet.
-		 */
-		tmp = tidq->packet;
-		tidq->packet = tidq->prev_packet;
-		tidq->prev_packet = tmp;
-	}
+	cs_etm__packet_swap(etm, tidq);
 
 	return err;
 }
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 13+ messages in thread

* [PATCH v4 2/5] perf cs-etm: Continuously record last branch
  2020-02-13  9:41 [PATCH v4 0/5] perf cs-etm: Fix synthesizing instruction samples Leo Yan
  2020-02-13  9:42 ` [PATCH v4 1/5] perf cs-etm: Swap packets for " Leo Yan
@ 2020-02-13  9:42 ` Leo Yan
  2020-02-13  9:42 ` [PATCH v4 3/5] perf cs-etm: Correct synthesizing instruction samples Leo Yan
                   ` (4 subsequent siblings)
  6 siblings, 0 replies; 13+ messages in thread
From: Leo Yan @ 2020-02-13  9:42 UTC (permalink / raw)
  To: Arnaldo Carvalho de Melo, Mathieu Poirier, Suzuki K Poulose,
	Mike Leach, Robert Walker, Peter Zijlstra, Ingo Molnar,
	Mark Rutland, Alexander Shishkin, Jiri Olsa, Namhyung Kim,
	linux-arm-kernel, linux-kernel, Coresight ML
  Cc: Leo Yan

Every time synthesize instruction sample, the last branch recording
will be reset.  This is fine if the instruction period is big enough,
for example if use the option '--itrace=i100000', the last branch
array is reset for every sample with 100000 instructions per period;
before generate the next instruction sample, there has the sufficient
packets coming to fill the last branch array.

On the other hand, if set a very small period, the packets will be
significantly reduced between two continuous instruction samples, thus
the last branch array is almost empty for new instruction sample by
frequently resetting.

To allow the last branches to work properly for any instruction periods,
this patch avoids to reset the last branch for every instruction sample
and only reset it when flush the trace data.  The last branches will
be reset only for two cases, one is for trace starting, another case
is for discontinuous trace; other cases can keep recording last branches
for continuous instruction samples.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
---
 tools/perf/util/cs-etm.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
index 84f30c2de185..b2f31390126a 100644
--- a/tools/perf/util/cs-etm.c
+++ b/tools/perf/util/cs-etm.c
@@ -1170,9 +1170,6 @@ static int cs_etm__synth_instruction_sample(struct cs_etm_queue *etmq,
 			"CS ETM Trace: failed to deliver instruction event, error %d\n",
 			ret);
 
-	if (etm->synth_opts.last_branch)
-		cs_etm__reset_last_branch_rb(tidq);
-
 	return ret;
 }
 
@@ -1485,6 +1482,10 @@ static int cs_etm__flush(struct cs_etm_queue *etmq,
 swap_packet:
 	cs_etm__packet_swap(etm, tidq);
 
+	/* Reset last branches after flush the trace */
+	if (etm->synth_opts.last_branch)
+		cs_etm__reset_last_branch_rb(tidq);
+
 	return err;
 }
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 13+ messages in thread

* [PATCH v4 3/5] perf cs-etm: Correct synthesizing instruction samples
  2020-02-13  9:41 [PATCH v4 0/5] perf cs-etm: Fix synthesizing instruction samples Leo Yan
  2020-02-13  9:42 ` [PATCH v4 1/5] perf cs-etm: Swap packets for " Leo Yan
  2020-02-13  9:42 ` [PATCH v4 2/5] perf cs-etm: Continuously record last branch Leo Yan
@ 2020-02-13  9:42 ` Leo Yan
  2020-02-13 13:37   ` Mike Leach
  2020-02-13  9:42 ` [PATCH v4 4/5] perf cs-etm: Optimize copying last branches Leo Yan
                   ` (3 subsequent siblings)
  6 siblings, 1 reply; 13+ messages in thread
From: Leo Yan @ 2020-02-13  9:42 UTC (permalink / raw)
  To: Arnaldo Carvalho de Melo, Mathieu Poirier, Suzuki K Poulose,
	Mike Leach, Robert Walker, Peter Zijlstra, Ingo Molnar,
	Mark Rutland, Alexander Shishkin, Jiri Olsa, Namhyung Kim,
	linux-arm-kernel, linux-kernel, Coresight ML
  Cc: Leo Yan

When 'etm->instructions_sample_period' is less than
'tidq->period_instructions', the function cs_etm__sample() cannot handle
this case properly with its logic.

Let's see below flow as an example:

- If we set itrace option '--itrace=i4', then function cs_etm__sample()
  has variables with initialized values:

  tidq->period_instructions = 0
  etm->instructions_sample_period = 4

- When the first packet is coming:

  packet->instr_count = 10; the number of instructions executed in this
  packet is 10, thus update period_instructions as below:

  tidq->period_instructions = 0 + 10 = 10
  instrs_over = 10 - 4 = 6
  offset = 10 - 6 - 1 = 3
  tidq->period_instructions = instrs_over = 6

- When the second packet is coming:

  packet->instr_count = 10; in the second pass, assume 10 instructions
  in the trace sample again:

  tidq->period_instructions = 6 + 10 = 16
  instrs_over = 16 - 4 = 12
  offset = 10 - 12 - 1 = -3  -> the negative value
  tidq->period_instructions = instrs_over = 12

So after handle these two packets, there have below issues:

The first issue is that cs_etm__instr_addr() returns the address within
the current trace sample of the instruction related to offset, so the
offset is supposed to be always unsigned value.  But in fact, function
cs_etm__sample() might calculate a negative offset value (in handling
the second packet, the offset is -3) and pass to cs_etm__instr_addr()
with u64 type with a big positive integer.

The second issue is it only synthesizes 2 samples for sample period = 4.
In theory, every packet has 10 instructions so the two packets have
total 20 instructions, 20 instructions should generate 5 samples
(4 x 5 = 20).  This is because cs_etm__sample() only calls once
cs_etm__synth_instruction_sample() to generate instruction sample per
range packet.

This patch fixes the logic in function cs_etm__sample(); the basic
idea for handling coming packet is:

- To synthesize the first instruction sample, it combines the left
  instructions from the previous packet and the head of the new
  packet; then generate continuous samples with sample period;
- At the tail of the new packet, if it has the rest instructions,
  these instructions will be left for the sequential sample.

Suggested-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 tools/perf/util/cs-etm.c | 87 ++++++++++++++++++++++++++++++++--------
 1 file changed, 70 insertions(+), 17 deletions(-)

diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
index b2f31390126a..4b7d6c36ce3c 100644
--- a/tools/perf/util/cs-etm.c
+++ b/tools/perf/util/cs-etm.c
@@ -1356,9 +1356,12 @@ static int cs_etm__sample(struct cs_etm_queue *etmq,
 	struct cs_etm_auxtrace *etm = etmq->etm;
 	int ret;
 	u8 trace_chan_id = tidq->trace_chan_id;
-	u64 instrs_executed = tidq->packet->instr_count;
+	u64 instrs_prev;
 
-	tidq->period_instructions += instrs_executed;
+	/* Get instructions remainder from previous packet */
+	instrs_prev = tidq->period_instructions;
+
+	tidq->period_instructions += tidq->packet->instr_count;
 
 	/*
 	 * Record a branch when the last instruction in
@@ -1376,26 +1379,76 @@ static int cs_etm__sample(struct cs_etm_queue *etmq,
 		 * TODO: allow period to be defined in cycles and clock time
 		 */
 
-		/* Get number of instructions executed after the sample point */
-		u64 instrs_over = tidq->period_instructions -
-			etm->instructions_sample_period;
+		/*
+		 * Below diagram demonstrates the instruction samples
+		 * generation flows:
+		 *
+		 *    Instrs     Instrs       Instrs       Instrs
+		 *   Sample(n)  Sample(n+1)  Sample(n+2)  Sample(n+3)
+		 *    |            |            |            |
+		 *    V            V            V            V
+		 *   --------------------------------------------------
+		 *            ^                                  ^
+		 *            |                                  |
+		 *         Period                             Period
+		 *    instructions(Pi)                   instructions(Pi')
+		 *
+		 *            |                                  |
+		 *            \---------------- -----------------/
+		 *                             V
+		 *                 tidq->packet->instr_count
+		 *
+		 * Instrs Sample(n...) are the synthesised samples occurring
+		 * every etm->instructions_sample_period instructions - as
+		 * defined on the perf command line.  Sample(n) is being the
+		 * last sample before the current etm packet, n+1 to n+3
+		 * samples are generated from the current etm packet.
+		 *
+		 * tidq->packet->instr_count represents the number of
+		 * instructions in the current etm packet.
+		 *
+		 * Period instructions (Pi) contains the the number of
+		 * instructions executed after the sample point(n) from the
+		 * previous etm packet.  This will always be less than
+		 * etm->instructions_sample_period.
+		 *
+		 * When generate new samples, it combines with two parts
+		 * instructions, one is the tail of the old packet and another
+		 * is the head of the new coming packet, to generate
+		 * sample(n+1); sample(n+2) and sample(n+3) consume the
+		 * instructions with sample period.  After sample(n+3), the rest
+		 * instructions will be used by later packet and it is assigned
+		 * to tidq->period_instructions for next round calculation.
+		 */
 
 		/*
-		 * Calculate the address of the sampled instruction (-1 as
-		 * sample is reported as though instruction has just been
-		 * executed, but PC has not advanced to next instruction)
+		 * Get the initial offset into the current packet instructions;
+		 * entry conditions ensure that instrs_prev is less than
+		 * etm->instructions_sample_period.
 		 */
-		u64 offset = (instrs_executed - instrs_over - 1);
-		u64 addr = cs_etm__instr_addr(etmq, trace_chan_id,
-					      tidq->packet, offset);
+		u64 offset = etm->instructions_sample_period - instrs_prev;
+		u64 addr;
 
-		ret = cs_etm__synth_instruction_sample(
-			etmq, tidq, addr, etm->instructions_sample_period);
-		if (ret)
-			return ret;
+		while (tidq->period_instructions >=
+				etm->instructions_sample_period) {
+			/*
+			 * Calculate the address of the sampled instruction (-1
+			 * as sample is reported as though instruction has just
+			 * been executed, but PC has not advanced to next
+			 * instruction)
+			 */
+			addr = cs_etm__instr_addr(etmq, trace_chan_id,
+						  tidq->packet, offset - 1);
+			ret = cs_etm__synth_instruction_sample(
+				etmq, tidq, addr,
+				etm->instructions_sample_period);
+			if (ret)
+				return ret;
 
-		/* Carry remaining instructions into next sample period */
-		tidq->period_instructions = instrs_over;
+			offset += etm->instructions_sample_period;
+			tidq->period_instructions -=
+				etm->instructions_sample_period;
+		}
 	}
 
 	if (etm->sample_branches) {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 13+ messages in thread

* [PATCH v4 4/5] perf cs-etm: Optimize copying last branches
  2020-02-13  9:41 [PATCH v4 0/5] perf cs-etm: Fix synthesizing instruction samples Leo Yan
                   ` (2 preceding siblings ...)
  2020-02-13  9:42 ` [PATCH v4 3/5] perf cs-etm: Correct synthesizing instruction samples Leo Yan
@ 2020-02-13  9:42 ` Leo Yan
  2020-02-13  9:42 ` [PATCH v4 5/5] perf cs-etm: Fix unsigned variable comparison to zero Leo Yan
                   ` (2 subsequent siblings)
  6 siblings, 0 replies; 13+ messages in thread
From: Leo Yan @ 2020-02-13  9:42 UTC (permalink / raw)
  To: Arnaldo Carvalho de Melo, Mathieu Poirier, Suzuki K Poulose,
	Mike Leach, Robert Walker, Peter Zijlstra, Ingo Molnar,
	Mark Rutland, Alexander Shishkin, Jiri Olsa, Namhyung Kim,
	linux-arm-kernel, linux-kernel, Coresight ML
  Cc: Leo Yan

If an instruction range packet can generate multiple instruction
samples, these samples share the same last branches; it's not necessary
to copy the same last branches repeatedly for these samples within the
same packet.

This patch moves out the last branches copying from function
cs_etm__synth_instruction_sample(), and execute it prior to generating
instruction samples.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
---
 tools/perf/util/cs-etm.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
index 4b7d6c36ce3c..aa4b6d060ebb 100644
--- a/tools/perf/util/cs-etm.c
+++ b/tools/perf/util/cs-etm.c
@@ -1151,10 +1151,8 @@ static int cs_etm__synth_instruction_sample(struct cs_etm_queue *etmq,
 
 	cs_etm__copy_insn(etmq, tidq->trace_chan_id, tidq->packet, &sample);
 
-	if (etm->synth_opts.last_branch) {
-		cs_etm__copy_last_branch_rb(etmq, tidq);
+	if (etm->synth_opts.last_branch)
 		sample.branch_stack = tidq->last_branch;
-	}
 
 	if (etm->synth_opts.inject) {
 		ret = cs_etm__inject_event(event, &sample,
@@ -1429,6 +1427,10 @@ static int cs_etm__sample(struct cs_etm_queue *etmq,
 		u64 offset = etm->instructions_sample_period - instrs_prev;
 		u64 addr;
 
+		/* Prepare last branches for instruction sample */
+		if (etm->synth_opts.last_branch)
+			cs_etm__copy_last_branch_rb(etmq, tidq);
+
 		while (tidq->period_instructions >=
 				etm->instructions_sample_period) {
 			/*
@@ -1506,6 +1508,11 @@ static int cs_etm__flush(struct cs_etm_queue *etmq,
 
 	if (etmq->etm->synth_opts.last_branch &&
 	    tidq->prev_packet->sample_type == CS_ETM_RANGE) {
+		u64 addr;
+
+		/* Prepare last branches for instruction sample */
+		cs_etm__copy_last_branch_rb(etmq, tidq);
+
 		/*
 		 * Generate a last branch event for the branches left in the
 		 * circular buffer at the end of the trace.
@@ -1513,7 +1520,7 @@ static int cs_etm__flush(struct cs_etm_queue *etmq,
 		 * Use the address of the end of the last reported execution
 		 * range
 		 */
-		u64 addr = cs_etm__last_executed_instr(tidq->prev_packet);
+		addr = cs_etm__last_executed_instr(tidq->prev_packet);
 
 		err = cs_etm__synth_instruction_sample(
 			etmq, tidq, addr,
@@ -1558,11 +1565,16 @@ static int cs_etm__end_block(struct cs_etm_queue *etmq,
 	 */
 	if (etmq->etm->synth_opts.last_branch &&
 	    tidq->prev_packet->sample_type == CS_ETM_RANGE) {
+		u64 addr;
+
+		/* Prepare last branches for instruction sample */
+		cs_etm__copy_last_branch_rb(etmq, tidq);
+
 		/*
 		 * Use the address of the end of the last reported execution
 		 * range.
 		 */
-		u64 addr = cs_etm__last_executed_instr(tidq->prev_packet);
+		addr = cs_etm__last_executed_instr(tidq->prev_packet);
 
 		err = cs_etm__synth_instruction_sample(
 			etmq, tidq, addr,
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 13+ messages in thread

* [PATCH v4 5/5] perf cs-etm: Fix unsigned variable comparison to zero
  2020-02-13  9:41 [PATCH v4 0/5] perf cs-etm: Fix synthesizing instruction samples Leo Yan
                   ` (3 preceding siblings ...)
  2020-02-13  9:42 ` [PATCH v4 4/5] perf cs-etm: Optimize copying last branches Leo Yan
@ 2020-02-13  9:42 ` Leo Yan
  2020-02-15  3:22 ` [PATCH v4 0/5] perf cs-etm: Fix synthesizing instruction samples Leo Yan
  2020-02-18 18:49 ` Mathieu Poirier
  6 siblings, 0 replies; 13+ messages in thread
From: Leo Yan @ 2020-02-13  9:42 UTC (permalink / raw)
  To: Arnaldo Carvalho de Melo, Mathieu Poirier, Suzuki K Poulose,
	Mike Leach, Robert Walker, Peter Zijlstra, Ingo Molnar,
	Mark Rutland, Alexander Shishkin, Jiri Olsa, Namhyung Kim,
	linux-arm-kernel, linux-kernel, Coresight ML
  Cc: Leo Yan

The variable 'offset' in function cs_etm__sample() is u64 type, it's not
appropriate to check it with 'while (offset > 0)'; this patch changes to
'while (offset)'.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
---
 tools/perf/util/cs-etm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
index aa4b6d060ebb..bba969d48076 100644
--- a/tools/perf/util/cs-etm.c
+++ b/tools/perf/util/cs-etm.c
@@ -962,7 +962,7 @@ static inline u64 cs_etm__instr_addr(struct cs_etm_queue *etmq,
 	if (packet->isa == CS_ETM_ISA_T32) {
 		u64 addr = packet->start_addr;
 
-		while (offset > 0) {
+		while (offset) {
 			addr += cs_etm__t32_instr_size(etmq,
 						       trace_chan_id, addr);
 			offset--;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 13+ messages in thread

* Re: [PATCH v4 3/5] perf cs-etm: Correct synthesizing instruction samples
  2020-02-13  9:42 ` [PATCH v4 3/5] perf cs-etm: Correct synthesizing instruction samples Leo Yan
@ 2020-02-13 13:37   ` Mike Leach
  0 siblings, 0 replies; 13+ messages in thread
From: Mike Leach @ 2020-02-13 13:37 UTC (permalink / raw)
  To: Leo Yan
  Cc: Mark Rutland, Mathieu Poirier, Suzuki K Poulose, Peter Zijlstra,
	Coresight ML, linux-kernel, Arnaldo Carvalho de Melo,
	Alexander Shishkin, Ingo Molnar, Namhyung Kim, Robert Walker,
	Jiri Olsa, linux-arm-kernel

Reviewed by: Mike Leach <mike.leach@linaro.org>

On Thu, 13 Feb 2020 at 09:43, Leo Yan <leo.yan@linaro.org> wrote:
>
> When 'etm->instructions_sample_period' is less than
> 'tidq->period_instructions', the function cs_etm__sample() cannot handle
> this case properly with its logic.
>
> Let's see below flow as an example:
>
> - If we set itrace option '--itrace=i4', then function cs_etm__sample()
>   has variables with initialized values:
>
>   tidq->period_instructions = 0
>   etm->instructions_sample_period = 4
>
> - When the first packet is coming:
>
>   packet->instr_count = 10; the number of instructions executed in this
>   packet is 10, thus update period_instructions as below:
>
>   tidq->period_instructions = 0 + 10 = 10
>   instrs_over = 10 - 4 = 6
>   offset = 10 - 6 - 1 = 3
>   tidq->period_instructions = instrs_over = 6
>
> - When the second packet is coming:
>
>   packet->instr_count = 10; in the second pass, assume 10 instructions
>   in the trace sample again:
>
>   tidq->period_instructions = 6 + 10 = 16
>   instrs_over = 16 - 4 = 12
>   offset = 10 - 12 - 1 = -3  -> the negative value
>   tidq->period_instructions = instrs_over = 12
>
> So after handle these two packets, there have below issues:
>
> The first issue is that cs_etm__instr_addr() returns the address within
> the current trace sample of the instruction related to offset, so the
> offset is supposed to be always unsigned value.  But in fact, function
> cs_etm__sample() might calculate a negative offset value (in handling
> the second packet, the offset is -3) and pass to cs_etm__instr_addr()
> with u64 type with a big positive integer.
>
> The second issue is it only synthesizes 2 samples for sample period = 4.
> In theory, every packet has 10 instructions so the two packets have
> total 20 instructions, 20 instructions should generate 5 samples
> (4 x 5 = 20).  This is because cs_etm__sample() only calls once
> cs_etm__synth_instruction_sample() to generate instruction sample per
> range packet.
>
> This patch fixes the logic in function cs_etm__sample(); the basic
> idea for handling coming packet is:
>
> - To synthesize the first instruction sample, it combines the left
>   instructions from the previous packet and the head of the new
>   packet; then generate continuous samples with sample period;
> - At the tail of the new packet, if it has the rest instructions,
>   these instructions will be left for the sequential sample.
>
> Suggested-by: Mike Leach <mike.leach@linaro.org>
> Signed-off-by: Leo Yan <leo.yan@linaro.org>
> ---
>  tools/perf/util/cs-etm.c | 87 ++++++++++++++++++++++++++++++++--------
>  1 file changed, 70 insertions(+), 17 deletions(-)
>
> diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
> index b2f31390126a..4b7d6c36ce3c 100644
> --- a/tools/perf/util/cs-etm.c
> +++ b/tools/perf/util/cs-etm.c
> @@ -1356,9 +1356,12 @@ static int cs_etm__sample(struct cs_etm_queue *etmq,
>         struct cs_etm_auxtrace *etm = etmq->etm;
>         int ret;
>         u8 trace_chan_id = tidq->trace_chan_id;
> -       u64 instrs_executed = tidq->packet->instr_count;
> +       u64 instrs_prev;
>
> -       tidq->period_instructions += instrs_executed;
> +       /* Get instructions remainder from previous packet */
> +       instrs_prev = tidq->period_instructions;
> +
> +       tidq->period_instructions += tidq->packet->instr_count;
>
>         /*
>          * Record a branch when the last instruction in
> @@ -1376,26 +1379,76 @@ static int cs_etm__sample(struct cs_etm_queue *etmq,
>                  * TODO: allow period to be defined in cycles and clock time
>                  */
>
> -               /* Get number of instructions executed after the sample point */
> -               u64 instrs_over = tidq->period_instructions -
> -                       etm->instructions_sample_period;
> +               /*
> +                * Below diagram demonstrates the instruction samples
> +                * generation flows:
> +                *
> +                *    Instrs     Instrs       Instrs       Instrs
> +                *   Sample(n)  Sample(n+1)  Sample(n+2)  Sample(n+3)
> +                *    |            |            |            |
> +                *    V            V            V            V
> +                *   --------------------------------------------------
> +                *            ^                                  ^
> +                *            |                                  |
> +                *         Period                             Period
> +                *    instructions(Pi)                   instructions(Pi')
> +                *
> +                *            |                                  |
> +                *            \---------------- -----------------/
> +                *                             V
> +                *                 tidq->packet->instr_count
> +                *
> +                * Instrs Sample(n...) are the synthesised samples occurring
> +                * every etm->instructions_sample_period instructions - as
> +                * defined on the perf command line.  Sample(n) is being the
> +                * last sample before the current etm packet, n+1 to n+3
> +                * samples are generated from the current etm packet.
> +                *
> +                * tidq->packet->instr_count represents the number of
> +                * instructions in the current etm packet.
> +                *
> +                * Period instructions (Pi) contains the the number of
> +                * instructions executed after the sample point(n) from the
> +                * previous etm packet.  This will always be less than
> +                * etm->instructions_sample_period.
> +                *
> +                * When generate new samples, it combines with two parts
> +                * instructions, one is the tail of the old packet and another
> +                * is the head of the new coming packet, to generate
> +                * sample(n+1); sample(n+2) and sample(n+3) consume the
> +                * instructions with sample period.  After sample(n+3), the rest
> +                * instructions will be used by later packet and it is assigned
> +                * to tidq->period_instructions for next round calculation.
> +                */
>
>                 /*
> -                * Calculate the address of the sampled instruction (-1 as
> -                * sample is reported as though instruction has just been
> -                * executed, but PC has not advanced to next instruction)
> +                * Get the initial offset into the current packet instructions;
> +                * entry conditions ensure that instrs_prev is less than
> +                * etm->instructions_sample_period.
>                  */
> -               u64 offset = (instrs_executed - instrs_over - 1);
> -               u64 addr = cs_etm__instr_addr(etmq, trace_chan_id,
> -                                             tidq->packet, offset);
> +               u64 offset = etm->instructions_sample_period - instrs_prev;
> +               u64 addr;
>
> -               ret = cs_etm__synth_instruction_sample(
> -                       etmq, tidq, addr, etm->instructions_sample_period);
> -               if (ret)
> -                       return ret;
> +               while (tidq->period_instructions >=
> +                               etm->instructions_sample_period) {
> +                       /*
> +                        * Calculate the address of the sampled instruction (-1
> +                        * as sample is reported as though instruction has just
> +                        * been executed, but PC has not advanced to next
> +                        * instruction)
> +                        */
> +                       addr = cs_etm__instr_addr(etmq, trace_chan_id,
> +                                                 tidq->packet, offset - 1);
> +                       ret = cs_etm__synth_instruction_sample(
> +                               etmq, tidq, addr,
> +                               etm->instructions_sample_period);
> +                       if (ret)
> +                               return ret;
>
> -               /* Carry remaining instructions into next sample period */
> -               tidq->period_instructions = instrs_over;
> +                       offset += etm->instructions_sample_period;
> +                       tidq->period_instructions -=
> +                               etm->instructions_sample_period;
> +               }
>         }
>
>         if (etm->sample_branches) {
> --
> 2.17.1
>


-- 
Mike Leach
Principal Engineer, ARM Ltd.
Manchester Design Centre. UK

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v4 0/5] perf cs-etm: Fix synthesizing instruction samples
  2020-02-13  9:41 [PATCH v4 0/5] perf cs-etm: Fix synthesizing instruction samples Leo Yan
                   ` (4 preceding siblings ...)
  2020-02-13  9:42 ` [PATCH v4 5/5] perf cs-etm: Fix unsigned variable comparison to zero Leo Yan
@ 2020-02-15  3:22 ` Leo Yan
  2020-02-17 15:30   ` Mathieu Poirier
  2020-02-18 18:49 ` Mathieu Poirier
  6 siblings, 1 reply; 13+ messages in thread
From: Leo Yan @ 2020-02-15  3:22 UTC (permalink / raw)
  To: Arnaldo Carvalho de Melo, Mathieu Poirier, Suzuki K Poulose,
	Mike Leach, Robert Walker, Peter Zijlstra, Ingo Molnar,
	Mark Rutland, Alexander Shishkin, Jiri Olsa, Namhyung Kim,
	linux-arm-kernel, linux-kernel, Coresight ML

On Thu, Feb 13, 2020 at 05:41:59PM +0800, Leo Yan wrote:
> This patch series is to address issues for synthesizing instruction
> samples, especially when the instruction sample period is small enough,
> the current logic cannot synthesize multiple instruction samples within
> one instruction range packet.

Thanks a lot for Mike's review.

Hi Mathieu/Suzuki, I'd like get your green light before we can ask
Arnaldo to help merge this patch set.  Thanks!

Leo

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v4 0/5] perf cs-etm: Fix synthesizing instruction samples
  2020-02-15  3:22 ` [PATCH v4 0/5] perf cs-etm: Fix synthesizing instruction samples Leo Yan
@ 2020-02-17 15:30   ` Mathieu Poirier
  2020-02-17 15:44     ` Leo Yan
  0 siblings, 1 reply; 13+ messages in thread
From: Mathieu Poirier @ 2020-02-17 15:30 UTC (permalink / raw)
  To: Leo Yan
  Cc: Mark Rutland, Suzuki K Poulose, Peter Zijlstra, Coresight ML,
	Linux Kernel Mailing List, Arnaldo Carvalho de Melo,
	Alexander Shishkin, Ingo Molnar, Namhyung Kim, Robert Walker,
	Jiri Olsa, linux-arm-kernel, Mike Leach

On Fri, 14 Feb 2020 at 20:23, Leo Yan <leo.yan@linaro.org> wrote:
>
> On Thu, Feb 13, 2020 at 05:41:59PM +0800, Leo Yan wrote:
> > This patch series is to address issues for synthesizing instruction
> > samples, especially when the instruction sample period is small enough,
> > the current logic cannot synthesize multiple instruction samples within
> > one instruction range packet.
>
> Thanks a lot for Mike's review.
>
> Hi Mathieu/Suzuki, I'd like get your green light before we can ask
> Arnaldo to help merge this patch set.  Thanks!

At the very least, please wait 10 days before pinging maintainers
about patch reviews.  I have never failed to review coresight patches
and this time is no different.

>
> Leo

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v4 0/5] perf cs-etm: Fix synthesizing instruction samples
  2020-02-17 15:30   ` Mathieu Poirier
@ 2020-02-17 15:44     ` Leo Yan
  0 siblings, 0 replies; 13+ messages in thread
From: Leo Yan @ 2020-02-17 15:44 UTC (permalink / raw)
  To: Mathieu Poirier
  Cc: Mark Rutland, Suzuki K Poulose, Peter Zijlstra, Coresight ML,
	Linux Kernel Mailing List, Arnaldo Carvalho de Melo,
	Alexander Shishkin, Ingo Molnar, Namhyung Kim, Robert Walker,
	Jiri Olsa, linux-arm-kernel, Mike Leach

Hi Mathieu,

On Mon, Feb 17, 2020 at 08:30:37AM -0700, Mathieu Poirier wrote:
> On Fri, 14 Feb 2020 at 20:23, Leo Yan <leo.yan@linaro.org> wrote:
> >
> > On Thu, Feb 13, 2020 at 05:41:59PM +0800, Leo Yan wrote:
> > > This patch series is to address issues for synthesizing instruction
> > > samples, especially when the instruction sample period is small enough,
> > > the current logic cannot synthesize multiple instruction samples within
> > > one instruction range packet.
> >
> > Thanks a lot for Mike's review.
> >
> > Hi Mathieu/Suzuki, I'd like get your green light before we can ask
> > Arnaldo to help merge this patch set.  Thanks!
> 
> At the very least, please wait 10 days before pinging maintainers
> about patch reviews.  I have never failed to review coresight patches
> and this time is no different.

Understand and sorry for hurry pushing.  Take your time for reviewing
and no rush :)

Thanks,
Leo

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v4 0/5] perf cs-etm: Fix synthesizing instruction samples
  2020-02-13  9:41 [PATCH v4 0/5] perf cs-etm: Fix synthesizing instruction samples Leo Yan
                   ` (5 preceding siblings ...)
  2020-02-15  3:22 ` [PATCH v4 0/5] perf cs-etm: Fix synthesizing instruction samples Leo Yan
@ 2020-02-18 18:49 ` Mathieu Poirier
  2020-02-18 19:30   ` Arnaldo Carvalho de Melo
  6 siblings, 1 reply; 13+ messages in thread
From: Mathieu Poirier @ 2020-02-18 18:49 UTC (permalink / raw)
  To: Leo Yan
  Cc: Mark Rutland, Suzuki K Poulose, Peter Zijlstra, Coresight ML,
	linux-kernel, Arnaldo Carvalho de Melo, Alexander Shishkin,
	Ingo Molnar, Namhyung Kim, Robert Walker, Jiri Olsa,
	linux-arm-kernel, Mike Leach

On Thu, Feb 13, 2020 at 05:41:59PM +0800, Leo Yan wrote:
> This patch series is to address issues for synthesizing instruction
> samples, especially when the instruction sample period is small enough,
> the current logic cannot synthesize multiple instruction samples within
> one instruction range packet.
> 
> Patch 0001 is to swap packets for instruction samples, so this allow
> option '--itrace=iNNN' can work well.
> 
> Patch 0002 avoids to reset the last branches for every instruction
> sample; if reset the last branches for every time generating sample, the
> later samples in the same range packet cannot use the last branches
> anymore.
> 
> Patch 0003 is the fixing for handling different instruction periods,
> especially for small sample period.
> 
> Patch 0004 is an optimization for copying last branches; it only copies
> last branches once if the instruction samples share the same last
> branches.
> 
> Patch 0005 is a minor fix for unsigned variable comparison to zero.
> 
> This patch set has been rebased on the latest perf/core branch; and
> verified on Juno board with below commands:
> 
>   # perf script --itrace=i2
>   # perf script --itrace=i2il16
>   # perf inject --itrace=i2il16 -i perf.data -o perf.data.new
>   # perf inject --itrace=i100il16 -i perf.data -o perf.data.new
> 
> Changes from v3:
> * Refactored patch 0001 with new function cs_etm__packet_swap() (Mike);
> * Refined instruction sample generation flow with single while loop,
>   which completely uses Mike's suggestions (Mike);
> * Added Mike's review tags for patch 01/02/04/05.
> 
> Changes from v2:
> * Added patch 0001 which is to fix swapping packets for instruction
>   samples;
> * Refined minor commit logs and comments;
> * Rebased on the latest perf/core branch.
> 
> Changes from v1:
> * Rebased patch set on perf/core branch with latest commit 9fec3cd5fa4a
>   ("perf map: Check if the map still has some refcounts on exit").
> 
> 
> 
> Leo Yan (5):
>   perf cs-etm: Swap packets for instruction samples
>   perf cs-etm: Continuously record last branch
>   perf cs-etm: Correct synthesizing instruction samples
>   perf cs-etm: Optimize copying last branches
>   perf cs-etm: Fix unsigned variable comparison to zero

For all the patches in this set:

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Unless Arnaldo says otherwise, I suggest you send a new V5 with Mike's RB for
patch 3/5 and mine for all of them.  That way he doesn't have to edit the
patches when applying them.

Thanks,
Mathieu

> 
>  tools/perf/util/cs-etm.c | 157 +++++++++++++++++++++++++++------------
>  1 file changed, 111 insertions(+), 46 deletions(-)
> 
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v4 0/5] perf cs-etm: Fix synthesizing instruction samples
  2020-02-18 18:49 ` Mathieu Poirier
@ 2020-02-18 19:30   ` Arnaldo Carvalho de Melo
  2020-02-19  1:32     ` Leo Yan
  0 siblings, 1 reply; 13+ messages in thread
From: Arnaldo Carvalho de Melo @ 2020-02-18 19:30 UTC (permalink / raw)
  To: Mathieu Poirier
  Cc: Mark Rutland, Suzuki K Poulose, Peter Zijlstra, Coresight ML,
	linux-kernel, Alexander Shishkin, Ingo Molnar, Leo Yan,
	Namhyung Kim, Robert Walker, Jiri Olsa, linux-arm-kernel,
	Mike Leach

Em Tue, Feb 18, 2020 at 11:49:34AM -0700, Mathieu Poirier escreveu:
> On Thu, Feb 13, 2020 at 05:41:59PM +0800, Leo Yan wrote:
> > This patch series is to address issues for synthesizing instruction
> > samples, especially when the instruction sample period is small enough,
> > the current logic cannot synthesize multiple instruction samples within
> > one instruction range packet.
> > 
> > Patch 0001 is to swap packets for instruction samples, so this allow
> > option '--itrace=iNNN' can work well.
> > 
> > Patch 0002 avoids to reset the last branches for every instruction
> > sample; if reset the last branches for every time generating sample, the
> > later samples in the same range packet cannot use the last branches
> > anymore.
> > 
> > Patch 0003 is the fixing for handling different instruction periods,
> > especially for small sample period.
> > 
> > Patch 0004 is an optimization for copying last branches; it only copies
> > last branches once if the instruction samples share the same last
> > branches.
> > 
> > Patch 0005 is a minor fix for unsigned variable comparison to zero.
> > 
> > This patch set has been rebased on the latest perf/core branch; and
> > verified on Juno board with below commands:
> > 
> >   # perf script --itrace=i2
> >   # perf script --itrace=i2il16
> >   # perf inject --itrace=i2il16 -i perf.data -o perf.data.new
> >   # perf inject --itrace=i100il16 -i perf.data -o perf.data.new
> > 
> > Changes from v3:
> > * Refactored patch 0001 with new function cs_etm__packet_swap() (Mike);
> > * Refined instruction sample generation flow with single while loop,
> >   which completely uses Mike's suggestions (Mike);
> > * Added Mike's review tags for patch 01/02/04/05.
> > 
> > Changes from v2:
> > * Added patch 0001 which is to fix swapping packets for instruction
> >   samples;
> > * Refined minor commit logs and comments;
> > * Rebased on the latest perf/core branch.
> > 
> > Changes from v1:
> > * Rebased patch set on perf/core branch with latest commit 9fec3cd5fa4a
> >   ("perf map: Check if the map still has some refcounts on exit").
> > 
> > 
> > 
> > Leo Yan (5):
> >   perf cs-etm: Swap packets for instruction samples
> >   perf cs-etm: Continuously record last branch
> >   perf cs-etm: Correct synthesizing instruction samples
> >   perf cs-etm: Optimize copying last branches
> >   perf cs-etm: Fix unsigned variable comparison to zero
> 
> For all the patches in this set:
> 
> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> 
> Unless Arnaldo says otherwise, I suggest you send a new V5 with Mike's RB for
> patch 3/5 and mine for all of them.  That way he doesn't have to edit the
> patches when applying them.

Yeah, that would make things easier for me, always appreciated.

- Arnaldo
 
> Thanks,
> Mathieu
> 
> > 
> >  tools/perf/util/cs-etm.c | 157 +++++++++++++++++++++++++++------------
> >  1 file changed, 111 insertions(+), 46 deletions(-)
> > 
> > -- 
> > 2.17.1
> > 

-- 

- Arnaldo

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v4 0/5] perf cs-etm: Fix synthesizing instruction samples
  2020-02-18 19:30   ` Arnaldo Carvalho de Melo
@ 2020-02-19  1:32     ` Leo Yan
  0 siblings, 0 replies; 13+ messages in thread
From: Leo Yan @ 2020-02-19  1:32 UTC (permalink / raw)
  To: Arnaldo Carvalho de Melo
  Cc: Mark Rutland, Mathieu Poirier, Suzuki K Poulose, Peter Zijlstra,
	Coresight ML, linux-kernel, Alexander Shishkin, Ingo Molnar,
	Namhyung Kim, Robert Walker, Jiri Olsa, linux-arm-kernel,
	Mike Leach

Hi Mathieu, Arnaldo,

On Tue, Feb 18, 2020 at 04:30:11PM -0300, Arnaldo Carvalho de Melo wrote:

[...]

> > > Leo Yan (5):
> > >   perf cs-etm: Swap packets for instruction samples
> > >   perf cs-etm: Continuously record last branch
> > >   perf cs-etm: Correct synthesizing instruction samples
> > >   perf cs-etm: Optimize copying last branches
> > >   perf cs-etm: Fix unsigned variable comparison to zero
> > 
> > For all the patches in this set:
> > 
> > Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> > 
> > Unless Arnaldo says otherwise, I suggest you send a new V5 with Mike's RB for
> > patch 3/5 and mine for all of them.  That way he doesn't have to edit the
> > patches when applying them.

Thanks for reviewing and suggestions.

> Yeah, that would make things easier for me, always appreciated.

Sure, will send out patch set V5.

Thanks,
Leo

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, other threads:[~2020-02-19  1:32 UTC | newest]

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-13  9:41 [PATCH v4 0/5] perf cs-etm: Fix synthesizing instruction samples Leo Yan
2020-02-13  9:42 ` [PATCH v4 1/5] perf cs-etm: Swap packets for " Leo Yan
2020-02-13  9:42 ` [PATCH v4 2/5] perf cs-etm: Continuously record last branch Leo Yan
2020-02-13  9:42 ` [PATCH v4 3/5] perf cs-etm: Correct synthesizing instruction samples Leo Yan
2020-02-13 13:37   ` Mike Leach
2020-02-13  9:42 ` [PATCH v4 4/5] perf cs-etm: Optimize copying last branches Leo Yan
2020-02-13  9:42 ` [PATCH v4 5/5] perf cs-etm: Fix unsigned variable comparison to zero Leo Yan
2020-02-15  3:22 ` [PATCH v4 0/5] perf cs-etm: Fix synthesizing instruction samples Leo Yan
2020-02-17 15:30   ` Mathieu Poirier
2020-02-17 15:44     ` Leo Yan
2020-02-18 18:49 ` Mathieu Poirier
2020-02-18 19:30   ` Arnaldo Carvalho de Melo
2020-02-19  1:32     ` Leo Yan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).