From: afzal mohammed <afzal.mohd.ma@gmail.com>
To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Paul Burton <paulburton@kernel.org>,
linux-mips@vger.kernel.org, Ralf Baechle <ralf@linux-mips.org>,
linux-kernel@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
Jiaxun Yang <jiaxun.yang@flygoat.com>,
"Maciej W. Rozycki" <macro@linux-mips.org>,
John Crispin <john@phrozen.org>, Huacai Chen <chenhc@lemote.com>,
Nathan Chancellor <natechancellor@gmail.com>,
Keguang Zhang <keguang.zhang@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH] MIPS: pass non-NULL dev_id on shared request_irq()
Date: Wed, 11 Mar 2020 20:57:51 +0530 [thread overview]
Message-ID: <20200311152751.GA5044@afzalpc> (raw)
In-Reply-To: <20200311104217.GA10615@alpha.franken.de>
Recently all usages of setup_irq() was replaced by request_irq().
request_irq() does a few sanity checks that were not done in
setup_irq(), if they fail irq registration will fail. One of the check is
to ensure that non-NULL dev_id is passed in the case of shared irq. This
caused malta on qemu to hang.
Fix it by passing a dev_id to all request_irq()'s that are shared.
Fixes: ac8fd122e070 ("MIPS: Replace setup_irq() by request_irq()")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
---
Hi Thomas,
i am assuming your next tree is immutable, hence referring to the SHA-ID
of the original commit in your tree. Else if you prefer a fixup'ed
patch, let me know, i will send v5 with this fixup over v4.
REgards
afzal
arch/mips/dec/setup.c | 2 +-
arch/mips/kernel/cevt-r4k.c | 2 +-
arch/mips/loongson2ef/lemote-2f/irq.c | 2 +-
arch/mips/pmcs-msp71xx/msp_time.c | 2 +-
arch/mips/sni/a20r.c | 2 +-
arch/mips/sni/pcit.c | 4 ++--
arch/mips/sni/rm200.c | 4 ++--
7 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index c8bbac0c5051..cbbb27fbab19 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -758,7 +758,7 @@ void __init arch_init_irq(void)
/* Register the bus error interrupt. */
if (dec_interrupt[DEC_IRQ_BUS] >= 0 && busirq_handler) {
if (request_irq(dec_interrupt[DEC_IRQ_BUS], busirq_handler,
- busirq_flags, "bus error", NULL))
+ busirq_flags, "bus error", "bus error"))
pr_err("Failed to register bus error interrupt\n");
}
/* Register the HALT interrupt. */
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index 64e917dfe6b2..4b19810c67d4 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -292,7 +292,7 @@ int r4k_clockevent_init(void)
cp0_timer_irq_installed = 1;
- if (request_irq(irq, c0_compare_interrupt, flags, "timer", NULL))
+ if (request_irq(irq, c0_compare_interrupt, flags, "timer", cd))
pr_err("Failed to request irq %d (timer)\n", irq);
return 0;
diff --git a/arch/mips/loongson2ef/lemote-2f/irq.c b/arch/mips/loongson2ef/lemote-2f/irq.c
index 34e15e8b7a8f..1c99e83cabae 100644
--- a/arch/mips/loongson2ef/lemote-2f/irq.c
+++ b/arch/mips/loongson2ef/lemote-2f/irq.c
@@ -109,7 +109,7 @@ void __init mach_init_irq(void)
/* setup north bridge irq (bonito) */
if (request_irq(LOONGSON_NORTH_BRIDGE_IRQ, ip6_action,
- IRQF_SHARED | IRQF_NO_THREAD, "cascade", NULL))
+ IRQF_SHARED | IRQF_NO_THREAD, "cascade", "cascade"))
pr_err("Failed to register north bridge cascade interrupt\n");
/* setup source bridge irq (i8259) */
if (request_irq(LOONGSON_SOUTH_BRIDGE_IRQ, no_action,
diff --git a/arch/mips/pmcs-msp71xx/msp_time.c b/arch/mips/pmcs-msp71xx/msp_time.c
index baf0da8b4c98..0601a3f7f8f6 100644
--- a/arch/mips/pmcs-msp71xx/msp_time.c
+++ b/arch/mips/pmcs-msp71xx/msp_time.c
@@ -81,7 +81,7 @@ unsigned int get_c0_compare_int(void)
/* MIPS_MT modes may want timer for second VPE */
if ((get_current_vpe()) && !tim_installed) {
if (request_irq(MSP_INT_VPE1_TIMER, c0_compare_interrupt, flags,
- "timer", NULL))
+ "timer", "timer"))
pr_err("Failed to register timer interrupt\n");
tim_installed++;
}
diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
index ba966d62fb4b..1bfea4aae124 100644
--- a/arch/mips/sni/a20r.c
+++ b/arch/mips/sni/a20r.c
@@ -223,7 +223,7 @@ void __init sni_a20r_irq_init(void)
sni_hwint = a20r_hwint;
change_c0_status(ST0_IM, IE_IRQ0);
if (request_irq(SNI_A20R_IRQ_BASE + 3, sni_isa_irq_handler,
- IRQF_SHARED, "ISA", NULL))
+ IRQF_SHARED, "ISA", "ISA"))
pr_err("Failed to register ISA interrupt\n");
}
diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c
index 4a850ab03398..15080155cc9a 100644
--- a/arch/mips/sni/pcit.c
+++ b/arch/mips/sni/pcit.c
@@ -245,7 +245,7 @@ void __init sni_pcit_irq_init(void)
sni_hwint = sni_pcit_hwint;
change_c0_status(ST0_IM, IE_IRQ1);
if (request_irq(SNI_PCIT_INT_START + 6, sni_isa_irq_handler,
- IRQF_SHARED, "ISA", NULL))
+ IRQF_SHARED, "ISA", "ISA"))
pr_err("Failed to register ISA interrupt\n");
}
@@ -260,7 +260,7 @@ void __init sni_pcit_cplus_irq_init(void)
sni_hwint = sni_pcit_hwint_cplus;
change_c0_status(ST0_IM, IE_IRQ0);
if (request_irq(MIPS_CPU_IRQ_BASE + 3, sni_isa_irq_handler,
- IRQF_SHARED, "ISA", NULL))
+ IRQF_SHARED, "ISA", "ISA"))
pr_err("Failed to register ISA interrupt\n");
}
diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c
index ba1f2fc6a43e..2b4a6448b428 100644
--- a/arch/mips/sni/rm200.c
+++ b/arch/mips/sni/rm200.c
@@ -473,10 +473,10 @@ void __init sni_rm200_irq_init(void)
sni_hwint = sni_rm200_hwint;
change_c0_status(ST0_IM, IE_IRQ0);
if (request_irq(SNI_RM200_INT_START + 0, sni_rm200_i8259A_irq_handler,
- IRQF_SHARED, "onboard ISA", NULL))
+ IRQF_SHARED, "onboard ISA", "onboard ISA"))
pr_err("Failed to register onboard ISA interrupt\n");
if (request_irq(SNI_RM200_INT_START + 1, sni_isa_irq_handler,
- IRQF_SHARED, "ISA", NULL))
+ IRQF_SHARED, "ISA", "ISA"))
pr_err("Failed to register ISA interrupt\n");
}
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-03-11 15:28 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-04 0:55 [PATCH v3] MIPS: Replace setup_irq() by request_irq() afzal mohammed
2020-03-04 20:31 ` Thomas Bogendoerfer
2020-03-05 11:57 ` [PATCH v4] " afzal mohammed
2020-03-06 12:47 ` Thomas Bogendoerfer
2020-03-11 5:31 ` Nathan Chancellor
2020-03-11 7:56 ` afzal mohammed
2020-03-11 9:03 ` afzal mohammed
2020-03-11 10:42 ` Thomas Bogendoerfer
2020-03-11 13:12 ` afzal mohammed
2020-03-11 16:03 ` Thomas Bogendoerfer
2020-03-11 16:32 ` afzal mohammed
2020-03-13 12:11 ` afzal mohammed
2020-03-14 8:13 ` [PATCH v2] MIPS: pass non-NULL dev_id on shared request_irq() afzal mohammed
2020-03-14 17:19 ` Guenter Roeck
2020-03-15 7:11 ` Nathan Chancellor
2020-03-16 15:32 ` Thomas Bogendoerfer
2020-03-14 6:55 ` [PATCH v4] MIPS: Replace setup_irq() by request_irq() afzal mohammed
2020-03-11 15:27 ` afzal mohammed [this message]
2020-03-11 16:06 ` [PATCH] MIPS: pass non-NULL dev_id on shared request_irq() afzal mohammed
2020-03-13 16:47 ` [PATCH v4] MIPS: Replace setup_irq() by request_irq() Guenter Roeck
2020-03-14 1:07 ` afzal mohammed
2020-03-14 5:21 ` maobibo
2020-03-14 6:49 ` afzal mohammed
2020-03-14 10:28 ` Guenter Roeck
2020-03-14 11:42 ` afzal mohammed
2020-03-05 12:29 ` [PATCH v3] " afzal mohammed
2020-03-05 12:42 ` afzal mohammed
2020-03-04 20:38 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200311152751.GA5044@afzalpc \
--to=afzal.mohd.ma@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=chenhc@lemote.com \
--cc=f.fainelli@gmail.com \
--cc=jiaxun.yang@flygoat.com \
--cc=john@phrozen.org \
--cc=keguang.zhang@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=macro@linux-mips.org \
--cc=natechancellor@gmail.com \
--cc=paulburton@kernel.org \
--cc=ralf@linux-mips.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).