Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] ARM: bcm2835_defconfig: Enable fixed-regulator
@ 2020-03-26 13:44 Nicolas Saenz Julienne
  2020-03-27 11:50 ` Nicolas Saenz Julienne
  0 siblings, 1 reply; 2+ messages in thread
From: Nicolas Saenz Julienne @ 2020-03-26 13:44 UTC (permalink / raw)
  To: Florian Fainelli, Ray Jui, Scott Branden,
	bcm-kernel-feedback-list, Nicolas Saenz Julienne
  Cc: Stefan Wahren, linux-kernel, Russell King, linux-arm-kernel,
	linux-rpi-kernel

This regulator is now used to control the SD card's power supply on the
Raspberry Pi 4.

Suggested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
 arch/arm/configs/bcm2835_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 8e7a3ed2a4df..44ff9cd88d81 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -103,6 +103,7 @@ CONFIG_WATCHDOG=y
 CONFIG_BCM2835_WDT=y
 CONFIG_MFD_SYSCON=y
 CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH] ARM: bcm2835_defconfig: Enable fixed-regulator
  2020-03-26 13:44 [PATCH] ARM: bcm2835_defconfig: Enable fixed-regulator Nicolas Saenz Julienne
@ 2020-03-27 11:50 ` Nicolas Saenz Julienne
  0 siblings, 0 replies; 2+ messages in thread
From: Nicolas Saenz Julienne @ 2020-03-27 11:50 UTC (permalink / raw)
  To: Florian Fainelli, Ray Jui, Scott Branden, bcm-kernel-feedback-list
  Cc: Stefan Wahren, linux-kernel, Russell King, linux-arm-kernel,
	linux-rpi-kernel

[-- Attachment #1.1: Type: text/plain, Size: 330 bytes --]

On Thu, 2020-03-26 at 14:44 +0100, Nicolas Saenz Julienne wrote:
> This regulator is now used to control the SD card's power supply on the
> Raspberry Pi 4.
> 
> Suggested-by: Stefan Wahren <stefan.wahren@i2se.com>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

Applied for-next.

Regards,
Nicolas


[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-26 13:44 [PATCH] ARM: bcm2835_defconfig: Enable fixed-regulator Nicolas Saenz Julienne
2020-03-27 11:50 ` Nicolas Saenz Julienne

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git