linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org,
	Ahmad Fatoum <a.fatoum@pengutronix.de>,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 4/8] ARM: dts: stm32: use uniform label names for sleep pinctrl phandles
Date: Thu, 26 Mar 2020 23:02:08 +0100	[thread overview]
Message-ID: <20200326220213.28632-4-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20200326220213.28632-1-a.fatoum@pengutronix.de>

Some labels follow the *_sleep_pins_* naming scheme, but some also use
*_pins_sleep_*. Because most labels use the former and for uniformity
with variants like sdmmc1_b4_pins_a and sdmmc1_dir_pins_a, adopt the
*_sleep_pins_* scheme throughout.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
v1 -> v2:
  - New Patch
---
 arch/arm/boot/dts/stm32mp15-pinctrl.dtsi     | 28 ++++++++++----------
 arch/arm/boot/dts/stm32mp157a-avenger96.dts  |  2 +-
 arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts |  4 +--
 arch/arm/boot/dts/stm32mp157c-ed1.dts        |  2 +-
 arch/arm/boot/dts/stm32mp157c-ev1.dts        |  6 ++---
 arch/arm/boot/dts/stm32mp15xx-dkx.dtsi       | 12 ++++-----
 6 files changed, 27 insertions(+), 27 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 73c07f0dfad2..1971a9603ba6 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -37,7 +37,7 @@ pins {
 		};
 	};
 
-	cec_pins_sleep_a: cec-sleep-0 {
+	cec_sleep_pins_a: cec-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */
 		};
@@ -52,7 +52,7 @@ pins {
 		};
 	};
 
-	cec_pins_sleep_b: cec-sleep-1 {
+	cec_sleep_pins_b: cec-sleep-1 {
 		pins {
 			pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */
 		};
@@ -142,7 +142,7 @@ pins3 {
 		};
 	};
 
-	ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 {
+	ethernet0_rgmii_sleep_pins_a: rgmii-sleep-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
 				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
@@ -182,7 +182,7 @@ pins2 {
 		};
 	};
 
-	ethernet0_rmii_pins_sleep_a: rmii-sleep-0 {
+	ethernet0_rmii_sleep_pins_a: rmii-sleep-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */
 				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */
@@ -250,7 +250,7 @@ pins {
 		};
 	};
 
-	i2c1_pins_sleep_a: i2c1-1 {
+	i2c1_sleep_pins_a: i2c1-1 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
 				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
@@ -267,7 +267,7 @@ pins {
 		};
 	};
 
-	i2c1_pins_sleep_b: i2c1-3 {
+	i2c1_sleep_pins_b: i2c1-3 {
 		pins {
 			pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
 				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
@@ -284,7 +284,7 @@ pins {
 		};
 	};
 
-	i2c2_pins_sleep_a: i2c2-1 {
+	i2c2_sleep_pins_a: i2c2-1 {
 		pins {
 			pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */
 				 <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
@@ -300,7 +300,7 @@ pins {
 		};
 	};
 
-	i2c2_pins_sleep_b1: i2c2-3 {
+	i2c2_sleep_pins_b1: i2c2-3 {
 		pins {
 			pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
 		};
@@ -316,7 +316,7 @@ pins {
 		};
 	};
 
-	i2c5_pins_sleep_a: i2c5-1 {
+	i2c5_sleep_pins_a: i2c5-1 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */
 				 <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */
@@ -335,7 +335,7 @@ pins {
 		};
 	};
 
-	i2s2_pins_sleep_a: i2s2-1 {
+	i2s2_sleep_pins_a: i2s2-1 {
 		pins {
 			pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */
 				 <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */
@@ -379,7 +379,7 @@ pins {
 		};
 	};
 
-	ltdc_pins_sleep_a: ltdc-a-1 {
+	ltdc_sleep_pins_a: ltdc-a-1 {
 		pins {
 			pinmux = <STM32_PINMUX('G',  7, ANALOG)>, /* LCD_CLK */
 				 <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
@@ -448,7 +448,7 @@ pins {
 		};
 	};
 
-	ltdc_pins_sleep_b: ltdc-b-1 {
+	ltdc_sleep_pins_b: ltdc-b-1 {
 		pins {
 			pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */
 				 <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */
@@ -1145,7 +1145,7 @@ pins {
 		};
 	};
 
-	i2c2_pins_sleep_b2: i2c2-1 {
+	i2c2_sleep_pins_b2: i2c2-1 {
 		pins {
 			pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */
 		};
@@ -1161,7 +1161,7 @@ pins {
 		};
 	};
 
-	i2c4_pins_sleep_a: i2c4-1 {
+	i2c4_sleep_pins_a: i2c4-1 {
 		pins {
 			pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
 				 <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
index 425175f7d83c..aba38950f2e9 100644
--- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
@@ -82,7 +82,7 @@ led6 {
 &ethernet0 {
 	status = "okay";
 	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
 	pinctrl-names = "default", "sleep";
 	phy-mode = "rgmii";
 	max-speed = <1000>;
diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
index af99e132e1b1..06ea8c1a7c56 100644
--- a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
@@ -77,7 +77,7 @@ &cec {
 &ethernet0 {
 	status = "okay";
 	pinctrl-0 = <&ethernet0_rmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rmii_pins_sleep_a>;
+	pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>;
 	pinctrl-names = "default", "sleep";
 	phy-mode = "rmii";
 	max-speed = <100>;
@@ -147,7 +147,7 @@ polytouch@38 {
 &ltdc {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&ltdc_pins_b>;
-	pinctrl-1 = <&ltdc_pins_sleep_b>;
+	pinctrl-1 = <&ltdc_sleep_pins_b>;
 	status = "okay";
 
 	port {
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index e9aad3e101ac..0aaae0df5b07 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -131,7 +131,7 @@ &gpu {
 &i2c4 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c4_pins_a>;
-	pinctrl-1 = <&i2c4_pins_sleep_a>;
+	pinctrl-1 = <&i2c4_sleep_pins_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
 	clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 26db0fe93a98..b19056557ef0 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -136,7 +136,7 @@ dsi_panel_in: endpoint {
 &ethernet0 {
 	status = "okay";
 	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
 	pinctrl-names = "default", "sleep";
 	phy-mode = "rgmii-id";
 	max-speed = <1000>;
@@ -171,7 +171,7 @@ nand@0 {
 &i2c2 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c2_pins_a>;
-	pinctrl-1 = <&i2c2_pins_sleep_a>;
+	pinctrl-1 = <&i2c2_sleep_pins_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
 	status = "okay";
@@ -225,7 +225,7 @@ joystick_pins: joystick-pins {
 &i2c5 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c5_pins_a>;
-	pinctrl-1 = <&i2c5_pins_sleep_a>;
+	pinctrl-1 = <&i2c5_sleep_pins_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index f964e2ae7d60..fcf50131e5fe 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -112,14 +112,14 @@ adc2: adc@100 {
 &cec {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cec_pins_b>;
-	pinctrl-1 = <&cec_pins_sleep_b>;
+	pinctrl-1 = <&cec_sleep_pins_b>;
 	status = "okay";
 };
 
 &ethernet0 {
 	status = "okay";
 	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
 	pinctrl-names = "default", "sleep";
 	phy-mode = "rgmii-id";
 	max-speed = <1000>;
@@ -142,7 +142,7 @@ &gpu {
 &i2c1 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c1_pins_a>;
-	pinctrl-1 = <&i2c1_pins_sleep_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
 	i2c-scl-rising-time-ns = <100>;
 	i2c-scl-falling-time-ns = <7>;
 	status = "okay";
@@ -217,7 +217,7 @@ cs42l51_rx_endpoint: endpoint@1 {
 &i2c4 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c4_pins_a>;
-	pinctrl-1 = <&i2c4_pins_sleep_a>;
+	pinctrl-1 = <&i2c4_sleep_pins_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
 	clock-frequency = <400000>;
@@ -366,7 +366,7 @@ &i2s2 {
 	clock-names = "pclk", "i2sclk", "x8k", "x11k";
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2s2_pins_a>;
-	pinctrl-1 = <&i2s2_pins_sleep_a>;
+	pinctrl-1 = <&i2s2_sleep_pins_a>;
 	status = "okay";
 
 	i2s2_port: port {
@@ -390,7 +390,7 @@ &iwdg2 {
 &ltdc {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&ltdc_pins_a>;
-	pinctrl-1 = <&ltdc_pins_sleep_a>;
+	pinctrl-1 = <&ltdc_sleep_pins_a>;
 	status = "okay";
 
 	port {
-- 
2.26.0.rc2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-03-26 22:03 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-26 22:02 [PATCH v2 1/8] ARM: dts: stm32: enable stm32mp157's &gpu by default Ahmad Fatoum
2020-03-26 22:02 ` [PATCH v2 2/8] ARM: dts: stm32: preset stm32mp15x video #address- and #size-cells Ahmad Fatoum
2020-03-26 22:02 ` [PATCH v2 3/8] ARM: dts: stm32: remove now redundant STM32MP15x video cell sizes Ahmad Fatoum
2020-03-26 22:02 ` Ahmad Fatoum [this message]
2020-03-26 22:02 ` [PATCH v2 5/8] ARM: dts: stm32: use uniform node names for sleep pinctrl groups Ahmad Fatoum
2020-03-26 22:02 ` [PATCH v2 7/8] ARM: dts: stm32: add STM32MP1-based Linux Automation MC-1 board Ahmad Fatoum
2020-03-26 22:02 ` [PATCH v2 8/8] dt-bindings: arm: stm32: document lxa, stm32mp157c-mc1 compatible Ahmad Fatoum
2020-04-01  9:06   ` [PATCH v2 8/8] dt-bindings: arm: stm32: document lxa,stm32mp157c-mc1 compatible Alexandre Torgue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200326220213.28632-4-a.fatoum@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=alexandre.torgue@st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mark.rutland@arm.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).