From: Clement Leger <cleger@kalray.eu>
To: Ohad Ben-Cohen <ohad@wizery.com>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Patrice Chotard <patrice.chotard@st.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>
Cc: Clement Leger <cleger@kalray.eu>,
linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com
Subject: [PATCH] remoteproc: remove rproc_elf32_sanity_check
Date: Fri, 27 Mar 2020 09:49:39 +0100 [thread overview]
Message-ID: <20200327084939.8321-1-cleger@kalray.eu> (raw)
Since checks are present in the remoteproc elf loader before calling
da_to_va, loading a elf64 will work on 32bits flavors of kernel.
Indeed, if a segment size is larger than what size_t can hold, the
loader will return an error so the functionality is equivalent to
what exists today.
Signed-off-by: Clement Leger <cleger@kalray.eu>
---
drivers/remoteproc/remoteproc_core.c | 2 +-
drivers/remoteproc/remoteproc_elf_loader.c | 21 ---------------------
drivers/remoteproc/remoteproc_internal.h | 1 -
drivers/remoteproc/st_remoteproc.c | 2 +-
drivers/remoteproc/st_slim_rproc.c | 2 +-
drivers/remoteproc/stm32_rproc.c | 2 +-
6 files changed, 4 insertions(+), 26 deletions(-)
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index a9ac1d01e09b..02ff076b0122 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -2069,7 +2069,7 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
rproc->ops->parse_fw = rproc_elf_load_rsc_table;
rproc->ops->find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table;
if (!rproc->ops->sanity_check)
- rproc->ops->sanity_check = rproc_elf32_sanity_check;
+ rproc->ops->sanity_check = rproc_elf_sanity_check;
rproc->ops->get_boot_addr = rproc_elf_get_boot_addr;
}
diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
index 16e2c496fd45..29034f99898d 100644
--- a/drivers/remoteproc/remoteproc_elf_loader.c
+++ b/drivers/remoteproc/remoteproc_elf_loader.c
@@ -112,27 +112,6 @@ int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw)
}
EXPORT_SYMBOL(rproc_elf_sanity_check);
-/**
- * rproc_elf_sanity_check() - Sanity Check ELF32 firmware image
- * @rproc: the remote processor handle
- * @fw: the ELF32 firmware image
- *
- * Make sure this fw image is sane.
- */
-int rproc_elf32_sanity_check(struct rproc *rproc, const struct firmware *fw)
-{
- int ret = rproc_elf_sanity_check(rproc, fw);
-
- if (ret)
- return ret;
-
- if (fw_elf_get_class(fw) == ELFCLASS32)
- return 0;
-
- return -EINVAL;
-}
-EXPORT_SYMBOL(rproc_elf32_sanity_check);
-
/**
* rproc_elf_get_boot_addr() - Get rproc's boot address.
* @rproc: the remote processor handle
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index b389dc79da81..31994715fd43 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -54,7 +54,6 @@ void *rproc_da_to_va(struct rproc *rproc, u64 da, size_t len);
phys_addr_t rproc_va_to_pa(void *cpu_addr);
int rproc_trigger_recovery(struct rproc *rproc);
-int rproc_elf32_sanity_check(struct rproc *rproc, const struct firmware *fw);
int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw);
u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw);
int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw);
diff --git a/drivers/remoteproc/st_remoteproc.c b/drivers/remoteproc/st_remoteproc.c
index a6cbfa452764..a3268d95a50e 100644
--- a/drivers/remoteproc/st_remoteproc.c
+++ b/drivers/remoteproc/st_remoteproc.c
@@ -233,7 +233,7 @@ static const struct rproc_ops st_rproc_ops = {
.parse_fw = st_rproc_parse_fw,
.load = rproc_elf_load_segments,
.find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
- .sanity_check = rproc_elf32_sanity_check,
+ .sanity_check = rproc_elf_sanity_check,
.get_boot_addr = rproc_elf_get_boot_addr,
};
diff --git a/drivers/remoteproc/st_slim_rproc.c b/drivers/remoteproc/st_slim_rproc.c
index 3cca8b65a8db..09bcb4d8b9e0 100644
--- a/drivers/remoteproc/st_slim_rproc.c
+++ b/drivers/remoteproc/st_slim_rproc.c
@@ -203,7 +203,7 @@ static const struct rproc_ops slim_rproc_ops = {
.da_to_va = slim_rproc_da_to_va,
.get_boot_addr = rproc_elf_get_boot_addr,
.load = rproc_elf_load_segments,
- .sanity_check = rproc_elf32_sanity_check,
+ .sanity_check = rproc_elf_sanity_check,
};
/**
diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
index 6a66dbf2df40..2e07a95439c8 100644
--- a/drivers/remoteproc/stm32_rproc.c
+++ b/drivers/remoteproc/stm32_rproc.c
@@ -505,7 +505,7 @@ static struct rproc_ops st_rproc_ops = {
.load = rproc_elf_load_segments,
.parse_fw = stm32_rproc_parse_fw,
.find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
- .sanity_check = rproc_elf32_sanity_check,
+ .sanity_check = rproc_elf_sanity_check,
.get_boot_addr = rproc_elf_get_boot_addr,
};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-03-27 8:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-27 8:49 Clement Leger [this message]
2020-03-27 16:17 ` [PATCH] remoteproc: remove rproc_elf32_sanity_check Mathieu Poirier
2020-03-30 19:11 ` Suman Anna
2020-03-31 6:51 ` Clément Leger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200327084939.8321-1-cleger@kalray.eu \
--to=cleger@kalray.eu \
--cc=alexandre.torgue@st.com \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=ohad@wizery.com \
--cc=patrice.chotard@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).