From: Robert Foss <robert.foss@linaro.org>
To: Dongchun Zhu <dongchun.zhu@mediatek.com>,
Fabio Estevam <festevam@gmail.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Sakari Ailus <sakari.ailus@iki.fi>,
Tomasz Figa <tfiga@chromium.org>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Robert Foss <robert.foss@linaro.org>
Subject: [PATCH v3 3/3] media: ov8856: Implement sensor module revision identification
Date: Tue, 31 Mar 2020 15:33:46 +0200 [thread overview]
Message-ID: <20200331133346.372517-4-robert.foss@linaro.org> (raw)
In-Reply-To: <20200331133346.372517-1-robert.foss@linaro.org>
Query the sensor for its module revision, and compare it
to known revisions.
Currently only the '1B' revision has been added.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
- Changes since v2:
* Add module revision 2A
* Sakari: Remove ov8856_check_revision()
* Sakari: Stop EEPROM streaming mode
drivers/media/i2c/ov8856.c | 51 ++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c
index 260aaf332631..c7551cee2bb0 100644
--- a/drivers/media/i2c/ov8856.c
+++ b/drivers/media/i2c/ov8856.c
@@ -32,6 +32,18 @@
#define OV8856_MODE_STANDBY 0x00
#define OV8856_MODE_STREAMING 0x01
+/* define 1B module revision */
+#define OV8856_1B_MODULE 0x02
+
+/* the OTP read-out buffer is at 0x7000 and 0xf is the offset
+ * of the byte in the OTP that means the module revision
+ */
+#define OV8856_MODULE_REVISION 0x700f
+#define OV8856_OTP_MODE_CTRL 0x3d84
+#define OV8856_OTP_LOAD_CTRL 0x3d81
+#define OV8856_OTP_MODE_AUTO 0x00
+#define OV8856_OTP_LOAD_CTRL_ENABLE BIT(0)
+
/* vertical-timings from sensor */
#define OV8856_REG_VTS 0x380e
#define OV8856_VTS_MAX 0x7fff
@@ -1152,6 +1164,45 @@ static int ov8856_identify_module(struct ov8856 *ov8856)
return -ENXIO;
}
+ ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT,
+ OV8856_REG_VALUE_08BIT, OV8856_MODE_STREAMING);
+ if (ret)
+ return ret;
+
+ ret = ov8856_write_reg(ov8856, OV8856_OTP_MODE_CTRL,
+ OV8856_REG_VALUE_08BIT, OV8856_OTP_MODE_AUTO);
+ if (ret) {
+ dev_err(&client->dev, "failed to set otp mode");
+ return ret;
+ }
+
+ ret = ov8856_write_reg(ov8856, OV8856_OTP_LOAD_CTRL,
+ OV8856_REG_VALUE_08BIT,
+ OV8856_OTP_LOAD_CTRL_ENABLE);
+ if (ret) {
+ dev_err(&client->dev, "failed to enable load control");
+ return ret;
+ }
+
+ ret = ov8856_read_reg(ov8856, OV8856_MODULE_REVISION,
+ OV8856_REG_VALUE_08BIT, &val);
+ if (ret) {
+ dev_err(&client->dev, "failed to read module revision");
+ return ret;
+ }
+
+ dev_info(&client->dev, "OV8856 revision %x (%s) at address 0x%02x\n",
+ val,
+ val == OV8856_1B_MODULE ? "1B" : "unknown revision",
+ client->addr);
+
+ ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT,
+ OV8856_REG_VALUE_08BIT, OV8856_MODE_STANDBY);
+ if (ret) {
+ dev_err(&client->dev, "failed to exit streaming mode");
+ return ret;
+ }
+
return 0;
}
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2020-03-31 15:57 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-31 13:33 [PATCH v3 0/3] media: ov8856: Add devicetree support Robert Foss
2020-03-31 13:33 ` [PATCH v6 1/3] media: dt-bindings: ov8856: Document YAML bindings Robert Foss
2020-03-31 15:12 ` Marco Felsch
2020-04-02 9:57 ` Robert Foss
2020-04-03 19:21 ` Marco Felsch
2020-04-01 8:07 ` Maxime Ripard
2020-04-02 10:10 ` Robert Foss
2020-04-03 23:27 ` Sakari Ailus
2020-04-04 9:34 ` Maxime Ripard
2020-04-06 8:25 ` Robert Foss
2020-04-06 8:35 ` Sakari Ailus
2020-04-07 8:36 ` Maxime Ripard
2020-04-07 11:29 ` Robert Foss
2020-04-07 12:32 ` Maxime Ripard
2020-04-07 15:47 ` Robert Foss
2020-04-07 16:39 ` Sakari Ailus
2020-04-07 16:46 ` Tomasz Figa
2020-04-07 17:20 ` Sakari Ailus
2020-04-08 12:21 ` Maxime Ripard
2020-04-08 12:35 ` Tomasz Figa
2020-04-08 13:43 ` Maxime Ripard
2020-04-08 15:28 ` Sakari Ailus
2020-04-08 15:30 ` Sakari Ailus
2020-04-08 16:34 ` Andy Shevchenko
2020-04-15 10:18 ` Maxime Ripard
2020-04-15 11:10 ` Robert Foss
2020-04-15 16:16 ` Sakari Ailus
2020-04-20 15:02 ` Maxime Ripard
2020-04-09 8:32 ` Robert Foss
2020-04-07 16:20 ` Sakari Ailus
2020-04-04 9:23 ` Maxime Ripard
2020-03-31 13:33 ` [PATCH v3 2/3] media: ov8856: Add devicetree support Robert Foss
2020-03-31 14:01 ` Andy Shevchenko
2020-04-06 13:37 ` Robert Foss
2020-04-06 15:06 ` Andy Shevchenko
2020-04-06 15:25 ` Robert Foss
2020-04-03 23:33 ` Sakari Ailus
2020-03-31 13:33 ` Robert Foss [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200331133346.372517-4-robert.foss@linaro.org \
--to=robert.foss@linaro.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dongchun.zhu@mediatek.com \
--cc=festevam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=sakari.ailus@iki.fi \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).