linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Eric Anholt <eric@anholt.net>
Cc: Linus Walleij <linus.walleij@linaro.org>,
	dri-devel@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] drm: pl111: Simplify vexpress init
Date: Wed,  8 Apr 2020 19:39:46 -0600	[thread overview]
Message-ID: <20200409013947.12667-3-robh@kernel.org> (raw)
In-Reply-To: <20200409013947.12667-1-robh@kernel.org>

The init VExpress variants currently instantiates a 'muxfpga' driver for
the sole purpose of getting a regmap for it. There's no reason to
instantiate a driver and doing so just complicates things. The muxfpga
driver also isn't unregistered properly on module unload. Let's
just simplify all this this by just calling
devm_regmap_init_vexpress_config() directly.

Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
 drivers/gpu/drm/pl111/pl111_versatile.c | 21 +++----------
 drivers/gpu/drm/pl111/pl111_vexpress.c  | 42 -------------------------
 drivers/gpu/drm/pl111/pl111_vexpress.h  |  7 -----
 3 files changed, 4 insertions(+), 66 deletions(-)

diff --git a/drivers/gpu/drm/pl111/pl111_versatile.c b/drivers/gpu/drm/pl111/pl111_versatile.c
index 09aeaffb7660..8c2551088f26 100644
--- a/drivers/gpu/drm/pl111/pl111_versatile.c
+++ b/drivers/gpu/drm/pl111/pl111_versatile.c
@@ -8,6 +8,7 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/regmap.h>
+#include <linux/vexpress.h>
 
 #include "pl111_versatile.h"
 #include "pl111_vexpress.h"
@@ -325,17 +326,8 @@ int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv)
 	versatile_clcd_type = (enum versatile_clcd)clcd_id->data;
 
 	/* Versatile Express special handling */
-	if (versatile_clcd_type == VEXPRESS_CLCD_V2M) {
+	if (IS_ENABLED(CONFIG_VEXPRESS_CONFIG) && versatile_clcd_type == VEXPRESS_CLCD_V2M) {
 		struct platform_device *pdev;
-
-		/* Registers a driver for the muxfpga */
-		ret = vexpress_muxfpga_init();
-		if (ret) {
-			dev_err(dev, "unable to initialize muxfpga driver\n");
-			of_node_put(np);
-			return ret;
-		}
-
 		/* Call into deep Vexpress configuration API */
 		pdev = of_find_device_by_node(np);
 		if (!pdev) {
@@ -343,13 +335,8 @@ int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv)
 			of_node_put(np);
 			return -EPROBE_DEFER;
 		}
-		map = dev_get_drvdata(&pdev->dev);
-		if (!map) {
-			dev_err(dev, "sysreg has not yet probed\n");
-			platform_device_put(pdev);
-			of_node_put(np);
-			return -EPROBE_DEFER;
-		}
+		map = devm_regmap_init_vexpress_config(&pdev->dev);
+		platform_device_put(pdev);
 	} else {
 		map = syscon_node_to_regmap(np);
 	}
diff --git a/drivers/gpu/drm/pl111/pl111_vexpress.c b/drivers/gpu/drm/pl111/pl111_vexpress.c
index 350570fe06b5..37ed3f1da820 100644
--- a/drivers/gpu/drm/pl111/pl111_vexpress.c
+++ b/drivers/gpu/drm/pl111/pl111_vexpress.c
@@ -94,45 +94,3 @@ int pl111_vexpress_clcd_init(struct device *dev,
 
 	return 0;
 }
-
-/*
- * This sets up the regmap pointer that will then be retrieved by
- * the detection code in pl111_versatile.c and passed in to the
- * pl111_vexpress_clcd_init() function above.
- */
-static int vexpress_muxfpga_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct regmap *map;
-
-	map = devm_regmap_init_vexpress_config(&pdev->dev);
-	if (IS_ERR(map))
-		return PTR_ERR(map);
-	dev_set_drvdata(dev, map);
-
-	return 0;
-}
-
-static const struct of_device_id vexpress_muxfpga_match[] = {
-	{ .compatible = "arm,vexpress-muxfpga", },
-	{}
-};
-
-static struct platform_driver vexpress_muxfpga_driver = {
-	.driver = {
-		.name = "vexpress-muxfpga",
-		.of_match_table = of_match_ptr(vexpress_muxfpga_match),
-	},
-	.probe = vexpress_muxfpga_probe,
-};
-
-int vexpress_muxfpga_init(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&vexpress_muxfpga_driver);
-	/* -EBUSY just means this driver is already registered */
-	if (ret == -EBUSY)
-		ret = 0;
-	return ret;
-}
diff --git a/drivers/gpu/drm/pl111/pl111_vexpress.h b/drivers/gpu/drm/pl111/pl111_vexpress.h
index 5d3681bb4c00..bb54864ca91e 100644
--- a/drivers/gpu/drm/pl111/pl111_vexpress.h
+++ b/drivers/gpu/drm/pl111/pl111_vexpress.h
@@ -10,8 +10,6 @@ int pl111_vexpress_clcd_init(struct device *dev,
 			     struct pl111_drm_dev_private *priv,
 			     struct regmap *map);
 
-int vexpress_muxfpga_init(void);
-
 #else
 
 static inline int pl111_vexpress_clcd_init(struct device *dev,
@@ -21,9 +19,4 @@ static inline int pl111_vexpress_clcd_init(struct device *dev,
 	return -ENODEV;
 }
 
-static inline int vexpress_muxfpga_init(void)
-{
-	return 0;
-}
-
 #endif
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-04-09  1:40 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-09  1:39 [PATCH 0/3] drm: pl111: Fix module loading issues Rob Herring
2020-04-09  1:39 ` [PATCH 1/3] drm: pl111: Fix module autoloading Rob Herring
2020-04-09 14:12   ` Sam Ravnborg
2020-04-17 20:09   ` Linus Walleij
2020-04-09  1:39 ` Rob Herring [this message]
2020-04-09 14:16   ` [PATCH 2/3] drm: pl111: Simplify vexpress init Sam Ravnborg
2020-04-17 17:43     ` Rob Herring
2020-04-17 20:23   ` Linus Walleij
2020-04-09  1:39 ` [PATCH 3/3] drm: pl111: Move VExpress setup into versatile init Rob Herring
2020-04-09 14:34   ` Sam Ravnborg
2020-04-17 17:33     ` Rob Herring
2020-04-17 20:27   ` Linus Walleij
2020-04-19 17:12     ` Rob Herring
2020-04-17 20:28 ` [PATCH 0/3] drm: pl111: Fix module loading issues Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200409013947.12667-3-robh@kernel.org \
    --to=robh@kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=eric@anholt.net \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).