linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Calvin Johnson <calvin.johnson@oss.nxp.com>
To: linux.cj@gmail.com, Jeremy Linton <jeremy.linton@arm.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Russell King - ARM Linux admin <linux@armlinux.org.uk>,
	Cristi Sovaiala <cristian.sovaiala@nxp.com>,
	Florin Laurentiu Chiculita <florinlaurentiu.chiculita@nxp.com>,
	Ioana Ciornei <ioana.ciornei@nxp.com>,
	Madalin Bucur <madalin.bucur@oss.nxp.com>
Cc: Ioana Radulescu <ruxandra.radulescu@nxp.com>,
	"Rajesh V . Bikkina" <rajesh.bikkina@nxp.com>,
	netdev@vger.kernel.org, Pankaj Bansal <pankaj.bansal@nxp.com>,
	linux-kernel@vger.kernel.org,
	Calvin Johnson <calvin.johnson@oss.nxp.com>,
	Diana Madalina Craciun <diana.craciun@nxp.com>,
	linux-acpi@vger.kernel.org,
	Makarand Pawagi <makarand.pawagi@nxp.com>,
	Varun Sethi <V.Sethi@nxp.com>, Marcin Wojtas <mw@semihalf.com>,
	"David S. Miller" <davem@davemloft.net>,
	linux-arm-kernel@lists.infradead.org,
	Laurentiu Tudor <laurentiu.tudor@nxp.com>
Subject: [RFC net-next PATCH v2 2/2] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver
Date: Sat, 18 Apr 2020 16:24:32 +0530	[thread overview]
Message-ID: <20200418105432.11233-3-calvin.johnson@oss.nxp.com> (raw)
In-Reply-To: <20200418105432.11233-1-calvin.johnson@oss.nxp.com>

Modify dpaa2_mac_connect() to support ACPI along with DT.
Modify dpaa2_mac_get_node() to get the dpmac fwnode from either
DT or ACPI.
Replace of_get_phy_mode with fwnode_get_phy_mode to get
phy-mode for a dpmac_node.
Define and use helper functions fwnode_phy_match() and
fwnode_phy_find_device() to find phy_dev that is later
connected to mac->phylink.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---

Changes in v2:
- Major change following other network drivers supporting ACPI
- dropped v1 patches 1, 2, 4, 5 and 6 as they are no longer valid
- incorporated other v1 review comments

 .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  | 122 ++++++++++++++----
 1 file changed, 94 insertions(+), 28 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
index 3ee236c5fc37..5a03da54a67f 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
@@ -3,6 +3,9 @@
 
 #include "dpaa2-eth.h"
 #include "dpaa2-mac.h"
+#include <linux/acpi.h>
+#include <linux/phy.h>
+#include <linux/phylink.h>
 
 #define phylink_to_dpaa2_mac(config) \
 	container_of((config), struct dpaa2_mac, phylink_config)
@@ -23,38 +26,56 @@ static int phy_mode(enum dpmac_eth_if eth_if, phy_interface_t *if_mode)
 }
 
 /* Caller must call of_node_put on the returned value */
-static struct device_node *dpaa2_mac_get_node(u16 dpmac_id)
+static struct fwnode_handle *dpaa2_mac_get_node(struct device *dev,
+						u16 dpmac_id)
 {
-	struct device_node *dpmacs, *dpmac = NULL;
-	u32 id;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	struct fwnode_handle *dpmacs, *dpmac = NULL;
+	unsigned long long adr;
+	acpi_status status;
 	int err;
+	u32 id;
 
-	dpmacs = of_find_node_by_name(NULL, "dpmacs");
-	if (!dpmacs)
-		return NULL;
+	if (is_of_node(dev->parent->fwnode)) {
+		dpmacs = device_get_named_child_node(dev->parent, "dpmacs");
+		if (!dpmacs)
+			return NULL;
+
+		while ((dpmac = fwnode_get_next_child_node(dpmacs, dpmac))) {
+			err = fwnode_property_read_u32(dpmac, "reg", &id);
+			if (err)
+				continue;
+			if (id == dpmac_id)
+				return dpmac;
+		}
 
-	while ((dpmac = of_get_next_child(dpmacs, dpmac)) != NULL) {
-		err = of_property_read_u32(dpmac, "reg", &id);
-		if (err)
-			continue;
-		if (id == dpmac_id)
-			break;
+	} else if (is_acpi_node(dev->parent->fwnode)) {
+		device_for_each_child_node(dev->parent, dpmac) {
+			status = acpi_evaluate_integer(ACPI_HANDLE_FWNODE(dpmac),
+						       "_ADR", NULL, &adr);
+			if (ACPI_FAILURE(status)) {
+				pr_debug("_ADR returned %d on %s\n",
+					 status, (char *)buffer.pointer);
+				continue;
+			} else {
+				id = (u32)adr;
+				if (id == dpmac_id)
+					return dpmac;
+			}
+		}
 	}
-
-	of_node_put(dpmacs);
-
-	return dpmac;
+	return NULL;
 }
 
-static int dpaa2_mac_get_if_mode(struct device_node *node,
+static int dpaa2_mac_get_if_mode(struct fwnode_handle *dpmac_node,
 				 struct dpmac_attr attr)
 {
 	phy_interface_t if_mode;
 	int err;
 
-	err = of_get_phy_mode(node, &if_mode);
-	if (!err)
-		return if_mode;
+	err = fwnode_get_phy_mode(dpmac_node);
+	if (err > 0)
+		return err;
 
 	err = phy_mode(attr.eth_if, &if_mode);
 	if (!err)
@@ -227,13 +248,40 @@ bool dpaa2_mac_is_type_fixed(struct fsl_mc_device *dpmac_dev,
 	return fixed;
 }
 
+static int fwnode_phy_match(struct device *dev, const void *phy_fwnode)
+{
+	return dev->fwnode == phy_fwnode;
+}
+
+static struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode)
+{
+	struct device *d;
+	struct mdio_device *mdiodev;
+
+	if (!phy_fwnode)
+		return NULL;
+
+	d = bus_find_device(&mdio_bus_type, NULL, phy_fwnode, fwnode_phy_match);
+	if (d) {
+		mdiodev = to_mdio_device(d);
+		if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY)
+			return to_phy_device(d);
+		put_device(d);
+	}
+
+	return NULL;
+}
+
 int dpaa2_mac_connect(struct dpaa2_mac *mac)
 {
 	struct fsl_mc_device *dpmac_dev = mac->mc_dev;
 	struct net_device *net_dev = mac->net_dev;
-	struct device_node *dpmac_node;
+	struct fwnode_handle *dpmac_node = NULL;
+	struct fwnode_reference_args args;
+	struct phy_device *phy_dev;
 	struct phylink *phylink;
 	struct dpmac_attr attr;
+	int status;
 	int err;
 
 	err = dpmac_open(mac->mc_io, 0, dpmac_dev->obj_desc.id,
@@ -251,7 +299,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 
 	mac->if_link_type = attr.link_type;
 
-	dpmac_node = dpaa2_mac_get_node(attr.id);
+	dpmac_node = dpaa2_mac_get_node(&mac->mc_dev->dev, attr.id);
 	if (!dpmac_node) {
 		netdev_err(net_dev, "No dpmac@%d node found.\n", attr.id);
 		err = -ENODEV;
@@ -269,7 +317,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 	 * error out if the interface mode requests them and there is no PHY
 	 * to act upon them
 	 */
-	if (of_phy_is_fixed_link(dpmac_node) &&
+	if (of_phy_is_fixed_link(to_of_node(dpmac_node)) &&
 	    (mac->if_mode == PHY_INTERFACE_MODE_RGMII_ID ||
 	     mac->if_mode == PHY_INTERFACE_MODE_RGMII_RXID ||
 	     mac->if_mode == PHY_INTERFACE_MODE_RGMII_TXID)) {
@@ -282,7 +330,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 	mac->phylink_config.type = PHYLINK_NETDEV;
 
 	phylink = phylink_create(&mac->phylink_config,
-				 of_fwnode_handle(dpmac_node), mac->if_mode,
+				 dpmac_node, mac->if_mode,
 				 &dpaa2_mac_phylink_ops);
 	if (IS_ERR(phylink)) {
 		err = PTR_ERR(phylink);
@@ -290,20 +338,38 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 	}
 	mac->phylink = phylink;
 
-	err = phylink_of_phy_connect(mac->phylink, dpmac_node, 0);
+	if (is_of_node(dpmac_node))
+		err = phylink_of_phy_connect(mac->phylink,
+					     to_of_node(dpmac_node), 0);
+	else if (is_acpi_node(dpmac_node)) {
+		status = acpi_node_get_property_reference(dpmac_node,
+							  "phy-handle",
+							  0, &args);
+		if (ACPI_FAILURE(status))
+			goto err_phylink_destroy;
+		phy_dev = fwnode_phy_find_device(args.fwnode);
+		if (!phy_dev)
+			goto err_phylink_destroy;
+
+		err = phylink_connect_phy(mac->phylink, phy_dev);
+		if (err)
+			phy_detach(phy_dev);
+	}
 	if (err) {
-		netdev_err(net_dev, "phylink_of_phy_connect() = %d\n", err);
+		netdev_err(net_dev, "phylink_fwnode_phy_connect() = %d\n", err);
 		goto err_phylink_destroy;
 	}
 
-	of_node_put(dpmac_node);
+	if (is_of_node(dpmac_node))
+		of_node_put(to_of_node(dpmac_node));
 
 	return 0;
 
 err_phylink_destroy:
 	phylink_destroy(mac->phylink);
 err_put_node:
-	of_node_put(dpmac_node);
+	if (is_of_node(dpmac_node))
+		of_node_put(to_of_node(dpmac_node));
 err_close_dpmac:
 	dpmac_close(mac->mc_io, 0, dpmac_dev->mc_handle);
 	return err;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-04-18 10:56 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-18 10:54 [RFC net-next PATCH v2 0/2] ACPI support for xgmac_mdio and dpaa2-mac drivers Calvin Johnson
2020-04-18 10:54 ` [RFC net-next PATCH v2 1/2] net/fsl: add ACPI support for mdio bus Calvin Johnson
2020-04-18 11:41   ` Russell King - ARM Linux admin
2020-04-18 11:50     ` Andy Shevchenko
2020-04-18 14:39     ` Andrew Lunn
2020-04-20 15:42     ` Calvin Johnson
2020-04-18 14:46   ` Andrew Lunn
2020-04-20 15:44     ` Calvin Johnson
2020-04-18 10:54 ` Calvin Johnson [this message]
2020-04-18 11:38   ` [RFC net-next PATCH v2 2/2] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver Russell King - ARM Linux admin
2020-04-20 13:53     ` Calvin Johnson
2020-04-18 15:00   ` Andrew Lunn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200418105432.11233-3-calvin.johnson@oss.nxp.com \
    --to=calvin.johnson@oss.nxp.com \
    --cc=V.Sethi@nxp.com \
    --cc=andrew@lunn.ch \
    --cc=andy.shevchenko@gmail.com \
    --cc=cristian.sovaiala@nxp.com \
    --cc=davem@davemloft.net \
    --cc=diana.craciun@nxp.com \
    --cc=f.fainelli@gmail.com \
    --cc=florinlaurentiu.chiculita@nxp.com \
    --cc=ioana.ciornei@nxp.com \
    --cc=jeremy.linton@arm.com \
    --cc=laurentiu.tudor@nxp.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux.cj@gmail.com \
    --cc=linux@armlinux.org.uk \
    --cc=madalin.bucur@oss.nxp.com \
    --cc=makarand.pawagi@nxp.com \
    --cc=mw@semihalf.com \
    --cc=netdev@vger.kernel.org \
    --cc=pankaj.bansal@nxp.com \
    --cc=rajesh.bikkina@nxp.com \
    --cc=ruxandra.radulescu@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).