From: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
To: linux-pm@vger.kernel.org, linux-acpi@vger.kernel.org,
netdev@vger.kernel.org, linux-wireless@vger.kernel.org,
platform-driver-x86@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-renesas-soc@vger.kernel.org,
linux-rockchip@lists.infradead.org
Cc: "Emmanuel Grumbach" <emmanuel.grumbach@intel.com>,
"Heiko Stuebner" <heiko@sntech.de>,
"Rafael J . Wysocki" <rjw@rjwysocki.net>,
"Vishal Kulkarni" <vishal@chelsio.com>,
"Luca Coelho" <luciano.coelho@intel.com>,
"Miquel Raynal" <miquel.raynal@bootlin.com>,
kernel@collabora.com, "Fabio Estevam" <festevam@gmail.com>,
"Amit Kucheria" <amit.kucheria@verdurent.com>,
"Chunyan Zhang" <zhang.lyra@gmail.com>,
"Daniel Lezcano" <daniel.lezcano@linaro.org>,
"Allison Randal" <allison@lohutok.net>,
"NXP Linux Team" <linux-imx@nxp.com>,
"Darren Hart" <dvhart@infradead.org>,
"Zhang Rui" <rui.zhang@intel.com>,
"Gayatri Kammela" <gayatri.kammela@intel.com>,
"Len Brown" <lenb@kernel.org>,
"Johannes Berg" <johannes.berg@intel.com>,
"Intel Linux Wireless" <linuxwifi@intel.com>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Ido Schimmel" <idosch@mellanox.com>,
"Baolin Wang" <baolin.wang7@gmail.com>,
"Jiri Pirko" <jiri@mellanox.com>,
"Orson Zhai" <orsonzhai@gmail.com>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Kalle Valo" <kvalo@codeaurora.org>,
"Support Opensource" <support.opensource@diasemi.com>,
"Enrico Weigelt" <info@metux.net>,
"Peter Kaestle" <peter@piie.net>,
"Sebastian Reichel" <sre@kernel.org>,
"Andrzej Pietrasiewicz" <andrzej.p@collabora.com>,
"Bartlomiej Zolnierkiewicz" <b.zolnierkie@samsung.com>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
"Shawn Guo" <shawnguo@kernel.org>,
"David S . Miller" <davem@davemloft.net>,
"Andy Shevchenko" <andy@infradead.org>
Subject: [PATCH v4 04/11] thermal: Store device mode in struct thermal_zone_device
Date: Thu, 28 May 2020 21:20:44 +0200 [thread overview]
Message-ID: <20200528192051.28034-5-andrzej.p@collabora.com> (raw)
In-Reply-To: <20200528192051.28034-1-andrzej.p@collabora.com>
Prepare for eliminating get_mode().
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
---
drivers/acpi/thermal.c | 18 ++++++----------
.../ethernet/mellanox/mlxsw/core_thermal.c | 21 +++++++------------
drivers/platform/x86/acerhdf.c | 15 ++++++-------
drivers/thermal/da9062-thermal.c | 6 ++----
drivers/thermal/imx_thermal.c | 17 +++++++--------
.../intel/int340x_thermal/int3400_thermal.c | 12 +++--------
.../thermal/intel/intel_quark_dts_thermal.c | 16 +++++++-------
drivers/thermal/thermal_of.c | 10 +++------
8 files changed, 44 insertions(+), 71 deletions(-)
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index fb46070c66d8..4ba273f49d87 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -172,7 +172,6 @@ struct acpi_thermal {
struct acpi_thermal_trips trips;
struct acpi_handle_list devices;
struct thermal_zone_device *thermal_zone;
- enum thermal_device_mode mode;
int kelvin_offset; /* in millidegrees */
struct work_struct thermal_check_work;
};
@@ -500,7 +499,7 @@ static void acpi_thermal_check(void *data)
{
struct acpi_thermal *tz = data;
- if (tz->mode != THERMAL_DEVICE_ENABLED)
+ if (tz->thermal_zone->mode != THERMAL_DEVICE_ENABLED)
return;
thermal_zone_device_update(tz->thermal_zone,
@@ -529,12 +528,7 @@ static int thermal_get_temp(struct thermal_zone_device *thermal, int *temp)
static int thermal_get_mode(struct thermal_zone_device *thermal,
enum thermal_device_mode *mode)
{
- struct acpi_thermal *tz = thermal->devdata;
-
- if (!tz)
- return -EINVAL;
-
- *mode = tz->mode;
+ *mode = thermal->mode;
return 0;
}
@@ -556,11 +550,11 @@ static int thermal_set_mode(struct thermal_zone_device *thermal,
if (mode == THERMAL_DEVICE_DISABLED)
pr_warn("thermal zone will be disabled\n");
- if (mode != tz->mode) {
- tz->mode = mode;
+ if (mode != tz->thermal_zone->mode) {
+ tz->thermal_zone->mode = mode;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"%s kernel ACPI thermal control\n",
- tz->mode == THERMAL_DEVICE_ENABLED ?
+ tz->thermal_zone->mode == THERMAL_DEVICE_ENABLED ?
"Enable" : "Disable"));
acpi_thermal_check(tz);
}
@@ -912,7 +906,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
goto remove_dev_link;
}
- tz->mode = THERMAL_DEVICE_ENABLED;
+ tz->thermal_zone->mode = THERMAL_DEVICE_ENABLED;
dev_info(&tz->device->dev, "registered as thermal_zone%d\n",
tz->thermal_zone->id);
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
index ce0a6837daa3..aa082e8a0b13 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
@@ -98,7 +98,6 @@ struct mlxsw_thermal_module {
struct mlxsw_thermal *parent;
struct thermal_zone_device *tzdev;
struct mlxsw_thermal_trip trips[MLXSW_THERMAL_NUM_TRIPS];
- enum thermal_device_mode mode;
int module; /* Module or gearbox number */
};
@@ -110,7 +109,6 @@ struct mlxsw_thermal {
struct thermal_cooling_device *cdevs[MLXSW_MFCR_PWMS_MAX];
u8 cooling_levels[MLXSW_THERMAL_MAX_STATE + 1];
struct mlxsw_thermal_trip trips[MLXSW_THERMAL_NUM_TRIPS];
- enum thermal_device_mode mode;
struct mlxsw_thermal_module *tz_module_arr;
u8 tz_module_num;
struct mlxsw_thermal_module *tz_gearbox_arr;
@@ -280,9 +278,7 @@ static int mlxsw_thermal_unbind(struct thermal_zone_device *tzdev,
static int mlxsw_thermal_get_mode(struct thermal_zone_device *tzdev,
enum thermal_device_mode *mode)
{
- struct mlxsw_thermal *thermal = tzdev->devdata;
-
- *mode = thermal->mode;
+ *mode = tzdev->mode;
return 0;
}
@@ -299,9 +295,9 @@ static int mlxsw_thermal_set_mode(struct thermal_zone_device *tzdev,
else
tzdev->polling_delay = 0;
+ tzdev->mode = mode;
mutex_unlock(&tzdev->lock);
- thermal->mode = mode;
thermal_zone_device_update(tzdev, THERMAL_EVENT_UNSPECIFIED);
return 0;
@@ -469,9 +465,7 @@ static int mlxsw_thermal_module_unbind(struct thermal_zone_device *tzdev,
static int mlxsw_thermal_module_mode_get(struct thermal_zone_device *tzdev,
enum thermal_device_mode *mode)
{
- struct mlxsw_thermal_module *tz = tzdev->devdata;
-
- *mode = tz->mode;
+ *mode = tzdev->mode;
return 0;
}
@@ -489,9 +483,10 @@ static int mlxsw_thermal_module_mode_set(struct thermal_zone_device *tzdev,
else
tzdev->polling_delay = 0;
+ tzdev->mode = mode;
+
mutex_unlock(&tzdev->lock);
- tz->mode = mode;
thermal_zone_device_update(tzdev, THERMAL_EVENT_UNSPECIFIED);
return 0;
@@ -765,7 +760,7 @@ mlxsw_thermal_module_tz_init(struct mlxsw_thermal_module *module_tz)
return err;
}
- module_tz->mode = THERMAL_DEVICE_ENABLED;
+ module_tz->tzdev->mode = THERMAL_DEVICE_ENABLED;
return 0;
}
@@ -881,7 +876,7 @@ mlxsw_thermal_gearbox_tz_init(struct mlxsw_thermal_module *gearbox_tz)
if (IS_ERR(gearbox_tz->tzdev))
return PTR_ERR(gearbox_tz->tzdev);
- gearbox_tz->mode = THERMAL_DEVICE_ENABLED;
+ gearbox_tz->tzdev->mode = THERMAL_DEVICE_ENABLED;
return 0;
}
@@ -1050,7 +1045,7 @@ int mlxsw_thermal_init(struct mlxsw_core *core,
if (err)
goto err_unreg_modules_tzdev;
- thermal->mode = THERMAL_DEVICE_ENABLED;
+ thermal->tzdev->mode = THERMAL_DEVICE_ENABLED;
*p_thermal = thermal;
return 0;
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 830a8b060e74..97b288485837 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -68,7 +68,6 @@ static int kernelmode = 1;
#else
static int kernelmode;
#endif
-static enum thermal_device_mode thermal_mode;
static unsigned int interval = 10;
static unsigned int fanon = 60000;
@@ -398,15 +397,16 @@ static inline void acerhdf_revert_to_bios_mode(void)
{
acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
kernelmode = 0;
- thermal_mode = THERMAL_DEVICE_DISABLED;
- if (thz_dev)
+ if (thz_dev) {
+ thz_dev->mode = THERMAL_DEVICE_DISABLED;
thz_dev->polling_delay = 0;
+ }
pr_notice("kernel mode fan control OFF\n");
}
static inline void acerhdf_enable_kernelmode(void)
{
kernelmode = 1;
- thermal_mode = THERMAL_DEVICE_ENABLED;
+ thz_dev->mode = THERMAL_DEVICE_ENABLED;
thz_dev->polling_delay = interval*1000;
thermal_zone_device_update(thz_dev, THERMAL_EVENT_UNSPECIFIED);
@@ -419,7 +419,7 @@ static int acerhdf_get_mode(struct thermal_zone_device *thermal,
if (verbose)
pr_notice("kernel mode fan control %d\n", kernelmode);
- *mode = thermal_mode;
+ *mode = thermal->mode;
return 0;
}
@@ -741,8 +741,6 @@ static int __init acerhdf_register_thermal(void)
if (IS_ERR(cl_dev))
return -EINVAL;
- thermal_mode = kernelmode ?
- THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED;
thz_dev = thermal_zone_device_register("acerhdf", 2, 0, NULL,
&acerhdf_dev_ops,
&acerhdf_zone_params, 0,
@@ -750,6 +748,9 @@ static int __init acerhdf_register_thermal(void)
if (IS_ERR(thz_dev))
return -EINVAL;
+ thz_dev->mode = kernelmode ?
+ THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED;
+
if (strcmp(thz_dev->governor->name,
acerhdf_zone_params.governor_name)) {
pr_err("Didn't get thermal governor %s, perhaps not compiled into thermal subsystem.\n",
diff --git a/drivers/thermal/da9062-thermal.c b/drivers/thermal/da9062-thermal.c
index c32709badeda..a14c7981c7c7 100644
--- a/drivers/thermal/da9062-thermal.c
+++ b/drivers/thermal/da9062-thermal.c
@@ -49,7 +49,6 @@ struct da9062_thermal {
struct da9062 *hw;
struct delayed_work work;
struct thermal_zone_device *zone;
- enum thermal_device_mode mode;
struct mutex lock; /* protection for da9062_thermal temperature */
int temperature;
int irq;
@@ -124,8 +123,7 @@ static irqreturn_t da9062_thermal_irq_handler(int irq, void *data)
static int da9062_thermal_get_mode(struct thermal_zone_device *z,
enum thermal_device_mode *mode)
{
- struct da9062_thermal *thermal = z->devdata;
- *mode = thermal->mode;
+ *mode = z->mode;
return 0;
}
@@ -233,7 +231,6 @@ static int da9062_thermal_probe(struct platform_device *pdev)
thermal->config = match->data;
thermal->hw = chip;
- thermal->mode = THERMAL_DEVICE_ENABLED;
thermal->dev = &pdev->dev;
INIT_DELAYED_WORK(&thermal->work, da9062_thermal_poll_on);
@@ -248,6 +245,7 @@ static int da9062_thermal_probe(struct platform_device *pdev)
ret = PTR_ERR(thermal->zone);
goto err;
}
+ thermal->zone->mode = THERMAL_DEVICE_ENABLED;
dev_dbg(&pdev->dev,
"TJUNC temperature polling period set at %d ms\n",
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index e761c9b42217..9a1114d721b6 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -197,7 +197,6 @@ struct imx_thermal_data {
struct cpufreq_policy *policy;
struct thermal_zone_device *tz;
struct thermal_cooling_device *cdev;
- enum thermal_device_mode mode;
struct regmap *tempmon;
u32 c1, c2; /* See formula in imx_init_calib() */
int temp_passive;
@@ -256,7 +255,7 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
bool wait;
u32 val;
- if (data->mode == THERMAL_DEVICE_ENABLED) {
+ if (tz->mode == THERMAL_DEVICE_ENABLED) {
/* Check if a measurement is currently in progress */
regmap_read(map, soc_data->temp_data, &val);
wait = !(val & soc_data->temp_valid_mask);
@@ -283,7 +282,7 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
regmap_read(map, soc_data->temp_data, &val);
- if (data->mode != THERMAL_DEVICE_ENABLED) {
+ if (tz->mode != THERMAL_DEVICE_ENABLED) {
regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
soc_data->measure_temp_mask);
regmap_write(map, soc_data->sensor_ctrl + REG_SET,
@@ -334,9 +333,7 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
static int imx_get_mode(struct thermal_zone_device *tz,
enum thermal_device_mode *mode)
{
- struct imx_thermal_data *data = tz->devdata;
-
- *mode = data->mode;
+ *mode = tz->mode;
return 0;
}
@@ -376,7 +373,7 @@ static int imx_set_mode(struct thermal_zone_device *tz,
}
}
- data->mode = mode;
+ tz->mode = mode;
thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return 0;
@@ -831,7 +828,7 @@ static int imx_thermal_probe(struct platform_device *pdev)
data->socdata->measure_temp_mask);
data->irq_enabled = true;
- data->mode = THERMAL_DEVICE_ENABLED;
+ data->tz->mode = THERMAL_DEVICE_ENABLED;
ret = devm_request_threaded_irq(&pdev->dev, data->irq,
imx_thermal_alarm_irq, imx_thermal_alarm_irq_thread,
@@ -885,7 +882,7 @@ static int __maybe_unused imx_thermal_suspend(struct device *dev)
data->socdata->measure_temp_mask);
regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
data->socdata->power_down_mask);
- data->mode = THERMAL_DEVICE_DISABLED;
+ data->tz->mode = THERMAL_DEVICE_DISABLED;
clk_disable_unprepare(data->thermal_clk);
return 0;
@@ -905,7 +902,7 @@ static int __maybe_unused imx_thermal_resume(struct device *dev)
data->socdata->power_down_mask);
regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
data->socdata->measure_temp_mask);
- data->mode = THERMAL_DEVICE_ENABLED;
+ data->tz->mode = THERMAL_DEVICE_ENABLED;
return 0;
}
diff --git a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
index e84faaadff87..f65b2fc09198 100644
--- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
+++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
@@ -48,7 +48,6 @@ struct int3400_thermal_priv {
struct acpi_device *adev;
struct platform_device *pdev;
struct thermal_zone_device *thermal;
- enum thermal_device_mode mode;
int art_count;
struct art *arts;
int trt_count;
@@ -381,12 +380,7 @@ static int int3400_thermal_get_temp(struct thermal_zone_device *thermal,
static int int3400_thermal_get_mode(struct thermal_zone_device *thermal,
enum thermal_device_mode *mode)
{
- struct int3400_thermal_priv *priv = thermal->devdata;
-
- if (!priv)
- return -EINVAL;
-
- *mode = priv->mode;
+ *mode = thermal->mode;
return 0;
}
@@ -404,8 +398,8 @@ static int int3400_thermal_set_mode(struct thermal_zone_device *thermal,
mode != THERMAL_DEVICE_DISABLED)
return -EINVAL;
- if (mode != priv->mode) {
- priv->mode = mode;
+ if (mode != thermal->mode) {
+ thermal->mode = mode;
result = int3400_thermal_run_osc(priv->adev->handle,
priv->current_uuid_index,
mode == THERMAL_DEVICE_ENABLED);
diff --git a/drivers/thermal/intel/intel_quark_dts_thermal.c b/drivers/thermal/intel/intel_quark_dts_thermal.c
index d704fc104cfd..d77cb3df5ade 100644
--- a/drivers/thermal/intel/intel_quark_dts_thermal.c
+++ b/drivers/thermal/intel/intel_quark_dts_thermal.c
@@ -103,7 +103,6 @@ struct soc_sensor_entry {
bool locked;
u32 store_ptps;
u32 store_dts_enable;
- enum thermal_device_mode mode;
struct thermal_zone_device *tzone;
};
@@ -128,7 +127,7 @@ static int soc_dts_enable(struct thermal_zone_device *tzd)
return ret;
if (out & QRK_DTS_ENABLE_BIT) {
- aux_entry->mode = THERMAL_DEVICE_ENABLED;
+ tzd->mode = THERMAL_DEVICE_ENABLED;
return 0;
}
@@ -139,9 +138,9 @@ static int soc_dts_enable(struct thermal_zone_device *tzd)
if (ret)
return ret;
- aux_entry->mode = THERMAL_DEVICE_ENABLED;
+ tzd->mode = THERMAL_DEVICE_ENABLED;
} else {
- aux_entry->mode = THERMAL_DEVICE_DISABLED;
+ tzd->mode = THERMAL_DEVICE_DISABLED;
pr_info("DTS is locked. Cannot enable DTS\n");
ret = -EPERM;
}
@@ -161,7 +160,7 @@ static int soc_dts_disable(struct thermal_zone_device *tzd)
return ret;
if (!(out & QRK_DTS_ENABLE_BIT)) {
- aux_entry->mode = THERMAL_DEVICE_DISABLED;
+ tzd->mode = THERMAL_DEVICE_DISABLED;
return 0;
}
@@ -173,9 +172,9 @@ static int soc_dts_disable(struct thermal_zone_device *tzd)
if (ret)
return ret;
- aux_entry->mode = THERMAL_DEVICE_DISABLED;
+ tzd->mode = THERMAL_DEVICE_DISABLED;
} else {
- aux_entry->mode = THERMAL_DEVICE_ENABLED;
+ tzd->mode = THERMAL_DEVICE_ENABLED;
pr_info("DTS is locked. Cannot disable DTS\n");
ret = -EPERM;
}
@@ -312,8 +311,7 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
static int sys_get_mode(struct thermal_zone_device *tzd,
enum thermal_device_mode *mode)
{
- struct soc_sensor_entry *aux_entry = tzd->devdata;
- *mode = aux_entry->mode;
+ *mode = tzd->mode;
return 0;
}
diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c
index ddf88dbe7ba2..c495b1e48ef2 100644
--- a/drivers/thermal/thermal_of.c
+++ b/drivers/thermal/thermal_of.c
@@ -51,7 +51,6 @@ struct __thermal_bind_params {
/**
* struct __thermal_zone - internal representation of a thermal zone
- * @mode: current thermal zone device mode (enabled/disabled)
* @passive_delay: polling interval while passive cooling is activated
* @polling_delay: zone polling interval
* @slope: slope of the temperature adjustment curve
@@ -65,7 +64,6 @@ struct __thermal_bind_params {
*/
struct __thermal_zone {
- enum thermal_device_mode mode;
int passive_delay;
int polling_delay;
int slope;
@@ -272,9 +270,7 @@ static int of_thermal_unbind(struct thermal_zone_device *thermal,
static int of_thermal_get_mode(struct thermal_zone_device *tz,
enum thermal_device_mode *mode)
{
- struct __thermal_zone *data = tz->devdata;
-
- *mode = data->mode;
+ *mode = tz->mode;
return 0;
}
@@ -296,7 +292,7 @@ static int of_thermal_set_mode(struct thermal_zone_device *tz,
mutex_unlock(&tz->lock);
- data->mode = mode;
+ tz->mode = mode;
thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return 0;
@@ -979,7 +975,6 @@ __init *thermal_of_build_thermal_zone(struct device_node *np)
finish:
of_node_put(child);
- tz->mode = THERMAL_DEVICE_DISABLED;
return tz;
@@ -1134,6 +1129,7 @@ int __init of_parse_thermal_zones(void)
of_thermal_free_zone(tz);
/* attempting to build remaining zones still */
}
+ zone->mode = THERMAL_DEVICE_DISABLED;
}
of_node_put(np);
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-05-28 19:25 UTC|newest]
Thread overview: 139+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Message-ID: <4493c0e4-51aa-3907-810c-74949ff27ca4@samsung.com>
2020-05-28 19:20 ` [PATCH v4 00/11] Stop monitoring disabled devices Andrzej Pietrasiewicz
2020-05-28 19:20 ` [PATCH v4 01/11] acpi: thermal: Fix error handling in the register function Andrzej Pietrasiewicz
2020-05-29 14:50 ` Guenter Roeck
2020-06-24 8:16 ` Bartlomiej Zolnierkiewicz
2020-06-24 12:54 ` Rafael J. Wysocki
2020-06-26 17:31 ` Andrzej Pietrasiewicz
2020-06-26 17:36 ` Rafael J. Wysocki
2020-05-28 19:20 ` [PATCH v4 02/11] thermal: Store thermal mode in a dedicated enum Andrzej Pietrasiewicz
2020-05-29 14:48 ` Guenter Roeck
2020-05-29 15:13 ` Andrzej Pietrasiewicz
2020-05-29 15:34 ` Guenter Roeck
2020-06-24 9:38 ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20 ` [PATCH v4 03/11] thermal: Add current mode to thermal zone device Andrzej Pietrasiewicz
2020-05-29 14:51 ` Guenter Roeck
2020-06-24 9:39 ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20 ` Andrzej Pietrasiewicz [this message]
2020-06-24 9:40 ` [PATCH v4 04/11] thermal: Store device mode in struct thermal_zone_device Bartlomiej Zolnierkiewicz
2020-05-28 19:20 ` [PATCH v4 05/11] thermal: remove get_mode() operation of drivers Andrzej Pietrasiewicz
2020-06-24 9:47 ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20 ` [PATCH v4 06/11] thermal: Add mode helpers Andrzej Pietrasiewicz
2020-06-24 9:49 ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20 ` [PATCH v4 07/11] thermal: Use mode helpers in drivers Andrzej Pietrasiewicz
2020-06-24 9:51 ` Bartlomiej Zolnierkiewicz
2020-06-26 16:08 ` Andrzej Pietrasiewicz
2020-05-28 19:20 ` [PATCH v4 08/11] thermal: Explicitly enable non-changing thermal zone devices Andrzej Pietrasiewicz
2020-06-24 10:00 ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20 ` [PATCH v4 09/11] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-06-24 10:02 ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20 ` [PATCH v4 10/11] thermal: Simplify or eliminate unnecessary set_mode() methods Andrzej Pietrasiewicz
2020-06-24 10:03 ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20 ` [PATCH v4 11/11] thermal: Rename set_mode() to change_mode() Andrzej Pietrasiewicz
2020-06-24 10:03 ` Bartlomiej Zolnierkiewicz
2020-06-01 11:36 ` [PATCH v4 02/11] thermal: Store thermal mode in a dedicated enum Peter Kästle
2020-06-01 11:36 ` [PATCH v4 04/11] thermal: Store device mode in struct thermal_zone_device Peter Kästle
2020-06-01 11:37 ` [PATCH v4 05/11] thermal: remove get_mode() operation of drivers Peter Kästle
2020-06-01 11:37 ` [PATCH v4 07/11] thermal: Use mode helpers in drivers Peter Kästle
2020-06-01 11:38 ` [PATCH v4 10/11] thermal: Simplify or eliminate unnecessary set_mode() methods Peter Kästle
2020-06-01 11:38 ` [PATCH v4 11/11] thermal: Rename set_mode() to change_mode() Peter Kästle
2020-06-23 14:37 ` [PATCH v4 00/11] Stop monitoring disabled devices Daniel Lezcano
2020-06-26 17:37 ` [PATCH v5 " Andrzej Pietrasiewicz
2020-06-26 17:37 ` [PATCH v5 01/11] acpi: thermal: Fix error handling in the register function Andrzej Pietrasiewicz
2020-06-29 7:19 ` Amit Kucheria
2020-06-26 17:37 ` [PATCH v5 02/11] thermal: Store thermal mode in a dedicated enum Andrzej Pietrasiewicz
2020-06-29 7:19 ` Amit Kucheria
2020-06-26 17:37 ` [PATCH v5 03/11] thermal: Add current mode to thermal zone device Andrzej Pietrasiewicz
2020-06-29 7:19 ` Amit Kucheria
2020-06-26 17:37 ` [PATCH v5 04/11] thermal: Store device mode in struct thermal_zone_device Andrzej Pietrasiewicz
2020-06-29 7:19 ` Amit Kucheria
2020-06-26 17:37 ` [PATCH v5 05/11] thermal: remove get_mode() operation of drivers Andrzej Pietrasiewicz
2020-06-29 7:20 ` Amit Kucheria
2020-06-26 17:37 ` [PATCH v5 06/11] thermal: Add mode helpers Andrzej Pietrasiewicz
2020-06-26 20:50 ` kernel test robot
2020-06-26 20:50 ` [RFC PATCH] thermal: thermal_zone_device_set_mode() can be static kernel test robot
2020-06-26 20:55 ` [PATCH v5 06/11] thermal: Add mode helpers kernel test robot
2020-06-29 7:04 ` Amit Kucheria
2020-06-29 11:16 ` [PATCH v6 00/11] Stop monitoring disabled devices Andrzej Pietrasiewicz
2020-06-29 11:16 ` [PATCH v6 01/11] acpi: thermal: Fix error handling in the register function Andrzej Pietrasiewicz
2020-06-29 11:16 ` [PATCH v6 02/11] thermal: Store thermal mode in a dedicated enum Andrzej Pietrasiewicz
2020-06-29 11:16 ` [PATCH v6 03/11] thermal: Add current mode to thermal zone device Andrzej Pietrasiewicz
2020-06-29 11:16 ` [PATCH v6 04/11] thermal: Store device mode in struct thermal_zone_device Andrzej Pietrasiewicz
2020-06-29 11:16 ` [PATCH v6 05/11] thermal: remove get_mode() operation of drivers Andrzej Pietrasiewicz
2020-06-29 11:16 ` [PATCH v6 06/11] thermal: Add mode helpers Andrzej Pietrasiewicz
2020-06-29 12:08 ` Daniel Lezcano
2020-06-29 11:16 ` [PATCH v6 07/11] thermal: Use mode helpers in drivers Andrzej Pietrasiewicz
2020-06-29 11:16 ` [PATCH v6 08/11] thermal: Explicitly enable non-changing thermal zone devices Andrzej Pietrasiewicz
2020-06-29 11:16 ` [PATCH v6 09/11] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-06-29 11:16 ` [PATCH v6 10/11] thermal: Simplify or eliminate unnecessary set_mode() methods Andrzej Pietrasiewicz
2020-06-29 11:16 ` [PATCH v6 11/11] thermal: Rename set_mode() to change_mode() Andrzej Pietrasiewicz
2020-06-26 17:37 ` [PATCH v5 07/11] thermal: Use mode helpers in drivers Andrzej Pietrasiewicz
2020-06-26 17:37 ` [PATCH v5 08/11] thermal: Explicitly enable non-changing thermal zone devices Andrzej Pietrasiewicz
2020-06-26 17:37 ` [PATCH v5 09/11] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-06-26 17:37 ` [PATCH v5 10/11] thermal: Simplify or eliminate unnecessary set_mode() methods Andrzej Pietrasiewicz
2020-06-26 17:37 ` [PATCH v5 11/11] thermal: Rename set_mode() to change_mode() Andrzej Pietrasiewicz
2020-06-01 10:02 ` [PATCH v4 00/11] Stop monitoring disabled devices Peter Kästle
2020-06-01 10:20 ` Andrzej Pietrasiewicz
[not found] <20200529154205.GA157653@roeck-us.net>
2020-05-29 16:08 ` [PATCH v4 04/11] thermal: Store device mode in struct thermal_zone_device Andrzej Pietrasiewicz
2020-05-29 17:21 ` Andrzej Pietrasiewicz
2020-05-29 19:08 ` Guenter Roeck
2020-04-07 17:49 [RFC 0/8] Stop monitoring disabled devices Andrzej Pietrasiewicz
2020-04-07 17:49 ` [RFC 1/8] thermal: int3400_thermal: Statically initialize .get_mode()/.set_mode() ops Andrzej Pietrasiewicz
[not found] ` <CGME20200415091204eucas1p1983548c2db52d8d0c2a5367034ec80dd@eucas1p1.samsung.com>
2020-04-15 9:12 ` Bartlomiej Zolnierkiewicz
2020-04-07 17:49 ` [RFC 2/8] thermal: Properly handle mode values in .set_mode() Andrzej Pietrasiewicz
[not found] ` <CGME20200415100543eucas1p24e24293da39844ca8791db86af5365a7@eucas1p2.samsung.com>
2020-04-15 10:05 ` Bartlomiej Zolnierkiewicz
2020-04-07 17:49 ` [RFC 3/8] thermal: Store thermal mode in a dedicated enum Andrzej Pietrasiewicz
[not found] ` <CGME20200415100944eucas1p1dcfeb784e790ca2fc3417fd2797e3f5d@eucas1p1.samsung.com>
2020-04-15 10:09 ` Bartlomiej Zolnierkiewicz
2020-04-07 17:49 ` [RFC 4/8] thermal: core: Introduce THERMAL_DEVICE_INITIAL Andrzej Pietrasiewicz
2020-04-07 17:49 ` [RFC 5/8] thermal: core: Monitor thermal zone after mode change Andrzej Pietrasiewicz
2020-04-07 17:49 ` [RFC 6/8] thermal: Set initial state to THERMAL_DEVICE_INITIAL Andrzej Pietrasiewicz
2020-04-07 17:49 ` [RFC 7/8] thermal: of: Monitor thermal zone after enabling it Andrzej Pietrasiewicz
[not found] ` <CGME20200415101829eucas1p18e21324d3c39926fffc6c8b5dc52f206@eucas1p1.samsung.com>
2020-04-15 10:18 ` Bartlomiej Zolnierkiewicz
2020-04-07 17:49 ` [RFC 8/8] thermal: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-04-09 10:29 ` [RFC 0/8] Stop monitoring disabled devices Daniel Lezcano
2020-04-09 11:10 ` Andrzej Pietrasiewicz
[not found] ` <CGME20200415104010eucas1p101278e53e34a2e56dfc7c82b533a9122@eucas1p1.samsung.com>
2020-04-15 10:40 ` Bartlomiej Zolnierkiewicz
2020-04-17 16:23 ` Andrzej Pietrasiewicz
2020-04-19 11:42 ` Bartlomiej Zolnierkiewicz
2020-04-17 21:11 ` Peter Kästle
2020-04-14 18:00 ` [RFC v2 0/9] " Andrzej Pietrasiewicz
2020-04-14 18:00 ` [RFC v2 1/9] thermal: int3400_thermal: Statically initialize .get_mode()/.set_mode() ops Andrzej Pietrasiewicz
2020-04-15 9:23 ` Daniel Lezcano
2020-04-14 18:00 ` [RFC v2 2/9] thermal: Eliminate an always-false condition Andrzej Pietrasiewicz
2020-04-14 18:00 ` [RFC v2 3/9] thermal: Properly handle mode values in .set_mode() Andrzej Pietrasiewicz
2020-04-14 22:14 ` Daniel Lezcano
2020-04-14 18:01 ` [RFC v2 4/9] thermal: core: Let thermal zone device's mode be stored in its struct Andrzej Pietrasiewicz
2020-04-14 22:30 ` Daniel Lezcano
2020-04-14 18:01 ` [RFC v2 5/9] thermal: Store mode in thermal_zone_device Andrzej Pietrasiewicz
2020-04-15 10:55 ` Daniel Lezcano
2020-04-17 16:20 ` [RFC v3 0/2] Stop monitoring disabled devices Andrzej Pietrasiewicz
2020-04-17 16:20 ` [RFC v3 1/2] thermal: core: Let thermal zone device's mode be stored in its struct Andrzej Pietrasiewicz
2020-04-17 20:44 ` Andy Shevchenko
2020-04-19 11:38 ` Bartlomiej Zolnierkiewicz
2020-04-19 13:10 ` Bartlomiej Zolnierkiewicz
2020-04-20 18:17 ` [PATCH 0/2] Stop monitoring disabled devices Andrzej Pietrasiewicz
2020-04-20 18:17 ` [PATCH 1/2] thermal: core: Let thermal zone device's mode be stored in its struct Andrzej Pietrasiewicz
2020-04-20 18:17 ` [PATCH 2/2] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-04-22 16:12 ` [PATCH RESEND 1/2] thermal: core: Let thermal zone device's mode be stored in its struct Andrzej Pietrasiewicz
2020-04-23 14:39 ` Bartlomiej Zolnierkiewicz
2020-04-23 16:57 ` [PATCH v3 0/2] Stop monitoring disabled devices Andrzej Pietrasiewicz
2020-04-23 16:57 ` [PATCH v3 1/2] thermal: core: Let thermal zone device's mode be stored in its struct Andrzej Pietrasiewicz
2020-05-04 7:00 ` Bartlomiej Zolnierkiewicz
2020-04-23 16:57 ` [PATCH v3 2/2] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-04-24 9:03 ` Zhang, Rui
2020-04-27 14:20 ` Zhang, Rui
2020-04-27 18:34 ` Andrzej Pietrasiewicz
2020-04-28 13:55 ` Zhang, Rui
2020-04-20 11:03 ` [RFC v3 1/2] thermal: core: Let thermal zone device's mode be stored in its struct Andrzej Pietrasiewicz
2020-04-20 18:19 ` Andrzej Pietrasiewicz
2020-05-23 21:24 ` Daniel Lezcano
2020-05-25 19:35 ` Andrzej Pietrasiewicz
2020-05-25 22:08 ` Daniel Lezcano
2020-05-26 16:56 ` Andrzej Pietrasiewicz
2020-05-27 13:30 ` Bartlomiej Zolnierkiewicz
2020-04-17 16:20 ` [RFC v3 2/2] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-04-19 13:50 ` [RFC v3 1/2] thermal: core: Let thermal zone device's mode be stored in its struct Peter Kästle
2020-04-14 18:01 ` [RFC v2 6/9] thermal: Remove get_mode() method Andrzej Pietrasiewicz
2020-04-14 18:01 ` [RFC v2 7/9] thermal: core: Monitor thermal zone after mode change Andrzej Pietrasiewicz
2020-04-14 18:01 ` [RFC v2 8/9] thermal: of: Monitor thermal zone after enabling it Andrzej Pietrasiewicz
2020-04-14 18:01 ` [RFC v2 9/9] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-04-14 21:52 ` [RFC v2 0/9] Stop monitoring disabled devices Ezequiel Garcia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200528192051.28034-5-andrzej.p@collabora.com \
--to=andrzej.p@collabora.com \
--cc=allison@lohutok.net \
--cc=amit.kucheria@verdurent.com \
--cc=andy@infradead.org \
--cc=b.zolnierkie@samsung.com \
--cc=baolin.wang7@gmail.com \
--cc=daniel.lezcano@linaro.org \
--cc=davem@davemloft.net \
--cc=dvhart@infradead.org \
--cc=emmanuel.grumbach@intel.com \
--cc=festevam@gmail.com \
--cc=gayatri.kammela@intel.com \
--cc=heiko@sntech.de \
--cc=idosch@mellanox.com \
--cc=info@metux.net \
--cc=jiri@mellanox.com \
--cc=johannes.berg@intel.com \
--cc=kernel@collabora.com \
--cc=kernel@pengutronix.de \
--cc=kvalo@codeaurora.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-pm@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linuxwifi@intel.com \
--cc=luciano.coelho@intel.com \
--cc=miquel.raynal@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=niklas.soderlund@ragnatech.se \
--cc=orsonzhai@gmail.com \
--cc=peter@piie.net \
--cc=platform-driver-x86@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=rui.zhang@intel.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=sre@kernel.org \
--cc=support.opensource@diasemi.com \
--cc=tglx@linutronix.de \
--cc=vishal@chelsio.com \
--cc=zhang.lyra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).