Hi!

> PinePhone uses PWM backlight and a XBD599 LCD panel over DSI for
> display.
> 
> Backlight levels curve was optimized by Martijn Braam using a
> lux meter.

If it was possible to preserve lux values for individual settings in
the comment somewhere... that would be nice :-).

One day, it would be nice to have brightness settings in lux, so I
could easily set matching levels on multiple devices, for example...

Best regards,

								Pavel

> +
> +&backlight {
> +	power-supply = <&reg_ldo_io0>;
> +	/*
> +	 * PWM backlight circuit on this PinePhone revision was changed since
> +	 * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight
> +	 * being off is around 20%. Duty cycle for the lowest brightness level
> +	 * also varries quite a bit between individual boards, so the lowest
> +	 * value here was chosen as a safe default.
> +	 */
> +	brightness-levels = <
> +		774  793  814  842
> +		882  935  1003 1088
> +		1192 1316 1462 1633
> +		1830 2054 2309 2596
> +		2916 3271 3664 4096>;
> +	num-interpolated-steps = <50>;
> +	default-brightness-level = <400>;

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html