Linux-ARM-Kernel Archive on
 help / color / Atom feed
From: Heiko Stuebner <>
Cc: Heiko Stuebner <>,,,
Subject: [PATCH] arm64: dts: rockchip: fix rk3399-puma gmac reset gpio
Date: Wed,  3 Jun 2020 15:28:36 +0200
Message-ID: <> (raw)

From: Heiko Stuebner <>

The puma gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.

While on the kernel side this works ok, other DT users may get
confused - as seen with uboot right now.

So bring this in line and make both properties match, similar to the
other Rockchip board.

Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Signed-off-by: Heiko Stuebner <>
 arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index 07694b196fdb..531520e771e7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -157,7 +157,7 @@ &gmac {
 	phy-mode = "rgmii";
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
 	snps,reset-delays-us = <0 10000 50000>;
 	tx_delay = <0x10>;

linux-arm-kernel mailing list

             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-03 13:28 Heiko Stuebner [this message]
2020-06-17  8:37 ` Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on

Archives are clonable:
	git clone --mirror linux-arm-kernel/git/0.git
	git clone --mirror linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ \
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone