From: Marc Zyngier <maz@kernel.org>
To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Sumit Garg <sumit.garg@linaro.org>,
Florian Fainelli <f.fainelli@gmail.com>,
Russell King <linux@arm.linux.org.uk>,
Jason Cooper <jason@lakedaemon.net>,
kernel-team@android.com, Andrew Lunn <andrew@lunn.ch>,
Catalin Marinas <catalin.marinas@arm.com>,
Gregory Clement <gregory.clement@bootlin.com>,
Thomas Gleixner <tglx@linutronix.de>,
Will Deacon <will@kernel.org>,
Valentin Schneider <Valentin.Schneider@arm.com>
Subject: [PATCH v2 09/17] irqchip/gic: Configure SGIs as standard interrupts
Date: Wed, 24 Jun 2020 20:58:03 +0100 [thread overview]
Message-ID: <20200624195811.435857-10-maz@kernel.org> (raw)
In-Reply-To: <20200624195811.435857-1-maz@kernel.org>
Change the way we deal with GIC SGIs by turning them into proper
IRQs, and calling into the arch code to register the interrupt range
instead of a callback.
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
drivers/irqchip/irq-gic.c | 101 +++++++++++++++++++++++---------------
1 file changed, 62 insertions(+), 39 deletions(-)
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 801a5a5004d6..86699761e19f 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -335,31 +335,22 @@ static void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
irqnr = irqstat & GICC_IAR_INT_ID_MASK;
- if (likely(irqnr > 15 && irqnr < 1020)) {
- if (static_branch_likely(&supports_deactivate_key))
- writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
- isb();
- handle_domain_irq(gic->domain, irqnr, regs);
- continue;
- }
- if (irqnr < 16) {
+ if (unlikely(irqnr >= 1020))
+ break;
+
+ if (static_branch_likely(&supports_deactivate_key))
writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
- if (static_branch_likely(&supports_deactivate_key))
- writel_relaxed(irqstat, cpu_base + GIC_CPU_DEACTIVATE);
-#ifdef CONFIG_SMP
- /*
- * Ensure any shared data written by the CPU sending
- * the IPI is read after we've read the ACK register
- * on the GIC.
- *
- * Pairs with the write barrier in gic_raise_softirq
- */
+ isb();
+
+ /*
+ * Ensure any shared data written by the CPU sending the IPI
+ * is read after we've read the ACK register on the GIC.
+ *
+ * Pairs with the write barrier in gic_ipi_send_mask
+ */
+ if (irqnr <= 15)
smp_rmb();
- handle_IPI(irqnr, regs);
-#endif
- continue;
- }
- break;
+ handle_domain_irq(gic->domain, irqnr, regs);
} while (1);
}
@@ -793,14 +784,14 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
return IRQ_SET_MASK_OK_DONE;
}
-static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
+static void gic_ipi_send_mask(struct irq_data *d, const struct cpumask *mask)
{
int cpu;
unsigned long flags, map = 0;
if (unlikely(nr_cpu_ids == 1)) {
/* Only one CPU? let's do a self-IPI... */
- writel_relaxed(2 << 24 | irq,
+ writel_relaxed(2 << 24 | d->hwirq,
gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
return;
}
@@ -818,7 +809,7 @@ static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
dmb(ishst);
/* this always happens on GIC0 */
- writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
+ writel_relaxed(map << 16 | d->hwirq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
gic_unlock_irqrestore(flags);
}
@@ -831,14 +822,28 @@ static int gic_starting_cpu(unsigned int cpu)
static __init void gic_smp_init(void)
{
- set_smp_cross_call(gic_raise_softirq);
+ struct irq_fwspec sgi_fwspec = {
+ .fwnode = gic_data[0].domain->fwnode,
+ .param_count = 1,
+ };
+ int base_sgi;
+
cpuhp_setup_state_nocalls(CPUHP_AP_IRQ_GIC_STARTING,
"irqchip/arm/gic:starting",
gic_starting_cpu, NULL);
+
+ base_sgi = __irq_domain_alloc_irqs(gic_data[0].domain, -1, 8,
+ NUMA_NO_NODE, &sgi_fwspec,
+ false, NULL);
+ if (WARN_ON(base_sgi <= 0))
+ return;
+
+ set_smp_ipi_range(base_sgi, 8);
}
#else
#define gic_smp_init() do { } while(0)
#define gic_set_affinity NULL
+#define gic_ipi_send_mask NULL
#endif
#ifdef CONFIG_BL_SWITCHER
@@ -985,15 +990,24 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
{
struct gic_chip_data *gic = d->host_data;
- if (hw < 32) {
+ switch (hw) {
+ case 0 ... 15:
+ irq_set_percpu_devid(irq);
+ irq_domain_set_info(d, irq, hw, &gic->chip, d->host_data,
+ handle_percpu_devid_fasteoi_ipi,
+ NULL, NULL);
+ break;
+ case 16 ... 31:
irq_set_percpu_devid(irq);
irq_domain_set_info(d, irq, hw, &gic->chip, d->host_data,
handle_percpu_devid_irq, NULL, NULL);
- } else {
+ break;
+ default:
irq_domain_set_info(d, irq, hw, &gic->chip, d->host_data,
handle_fasteoi_irq, NULL, NULL);
irq_set_probe(irq);
irqd_set_single_target(irq_desc_get_irq_data(irq_to_desc(irq)));
+ break;
}
return 0;
}
@@ -1007,19 +1021,26 @@ static int gic_irq_domain_translate(struct irq_domain *d,
unsigned long *hwirq,
unsigned int *type)
{
+ if (fwspec->param_count == 1 && fwspec->param[0] < 16) {
+ *hwirq = fwspec->param[0];
+ *type = IRQ_TYPE_EDGE_RISING;
+ return 0;
+ }
+
if (is_of_node(fwspec->fwnode)) {
if (fwspec->param_count < 3)
return -EINVAL;
- /* Get the interrupt number and add 16 to skip over SGIs */
- *hwirq = fwspec->param[1] + 16;
-
- /*
- * For SPIs, we need to add 16 more to get the GIC irq
- * ID number
- */
- if (!fwspec->param[0])
- *hwirq += 16;
+ switch (fwspec->param[0]) {
+ case 0: /* SPI */
+ *hwirq = fwspec->param[1] + 32;
+ break;
+ case 1: /* PPI */
+ *hwirq = fwspec->param[1] + 16;
+ break;
+ default:
+ return -EINVAL;
+ }
*type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK;
@@ -1088,8 +1109,10 @@ static void gic_init_chip(struct gic_chip_data *gic, struct device *dev,
gic->chip.irq_set_vcpu_affinity = gic_irq_set_vcpu_affinity;
}
- if (gic == &gic_data[0])
+ if (gic == &gic_data[0]) {
gic->chip.irq_set_affinity = gic_set_affinity;
+ gic->chip.ipi_send_mask = gic_ipi_send_mask;
+ }
}
static int gic_init_bases(struct gic_chip_data *gic,
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-06-24 20:01 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-24 19:57 [PATCH v2 00/17] arm/arm64: Turning IPIs into normal interrupts Marc Zyngier
2020-06-24 19:57 ` [PATCH v2 01/17] genirq: Add fasteoi IPI flow Marc Zyngier
2020-06-24 19:57 ` [PATCH v2 02/17] genirq: Allow interrupts to be excluded from /proc/interrupts Marc Zyngier
2020-06-24 19:57 ` [PATCH v2 03/17] arm64: Allow IPIs to be handled as normal interrupts Marc Zyngier
2020-06-25 18:25 ` Valentin Schneider
2020-07-10 19:58 ` Valentin Schneider
2020-06-24 19:57 ` [PATCH v2 04/17] ARM: " Marc Zyngier
2020-06-25 18:25 ` Valentin Schneider
2020-06-29 9:37 ` Marc Zyngier
2020-06-24 19:57 ` [PATCH v2 05/17] irqchip/gic-v3: Describe the SGI range Marc Zyngier
2020-06-24 19:58 ` [PATCH v2 06/17] irqchip/gic-v3: Configure SGIs as standard interrupts Marc Zyngier
2020-06-25 18:25 ` Valentin Schneider
2020-06-30 10:15 ` Marc Zyngier
2020-07-02 13:23 ` Valentin Schneider
2020-07-02 13:48 ` Marc Zyngier
2020-07-02 14:24 ` Valentin Schneider
2020-06-24 19:58 ` [PATCH v2 07/17] irqchip/gic: Atomically update affinity Marc Zyngier
2020-07-01 19:33 ` Sasha Levin
2020-07-10 14:02 ` Sasha Levin
2021-09-09 15:22 ` Geert Uytterhoeven
2021-09-09 15:37 ` Russell King (Oracle)
2021-09-10 10:22 ` Marc Zyngier
2021-09-10 13:19 ` Geert Uytterhoeven
2021-09-11 2:49 ` Magnus Damm
2021-09-11 19:32 ` Marc Zyngier
2021-09-12 5:40 ` Magnus Damm
2021-09-13 8:05 ` Geert Uytterhoeven
2021-09-15 3:28 ` Magnus Damm
2020-06-24 19:58 ` [PATCH v2 08/17] irqchip/gic: Refactor SMP configuration Marc Zyngier
2020-06-24 19:58 ` Marc Zyngier [this message]
2020-06-24 19:58 ` [PATCH v2 10/17] irqchip/gic-common: Don't enable SGIs by default Marc Zyngier
2020-06-24 19:58 ` [PATCH v2 11/17] irqchip/bcm2836: Configure mailbox interrupts as standard interrupts Marc Zyngier
2020-06-24 19:58 ` [PATCH v2 12/17] irqchip/hip04: Configure IPIs " Marc Zyngier
2020-06-24 19:58 ` [PATCH v2 13/17] irqchip/armada-370-xp: " Marc Zyngier
2020-06-24 19:58 ` [PATCH v2 14/17] arm64: Kill __smp_cross_call and co Marc Zyngier
2020-06-25 18:25 ` Valentin Schneider
2020-07-02 13:37 ` Marc Zyngier
2020-06-24 19:58 ` [PATCH v2 15/17] arm64: Remove custom IRQ stat accounting Marc Zyngier
2020-06-25 18:26 ` Valentin Schneider
2020-06-26 11:58 ` Marc Zyngier
2020-06-26 23:15 ` Valentin Schneider
2020-06-27 11:42 ` Marc Zyngier
2020-07-10 19:58 ` Valentin Schneider
2020-06-24 19:58 ` [PATCH v2 16/17] ARM: Kill __smp_cross_call and co Marc Zyngier
2020-06-24 19:58 ` [PATCH v2 17/17] ARM: Remove custom IRQ stat accounting Marc Zyngier
2020-06-25 18:24 ` [PATCH v2 00/17] arm/arm64: Turning IPIs into normal interrupts Valentin Schneider
2020-07-10 19:58 ` Valentin Schneider
2020-08-11 13:15 ` Sumit Garg
2020-08-11 13:58 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200624195811.435857-10-maz@kernel.org \
--to=maz@kernel.org \
--cc=Valentin.Schneider@arm.com \
--cc=andrew@lunn.ch \
--cc=catalin.marinas@arm.com \
--cc=f.fainelli@gmail.com \
--cc=gregory.clement@bootlin.com \
--cc=jason@lakedaemon.net \
--cc=kernel-team@android.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=sumit.garg@linaro.org \
--cc=tglx@linutronix.de \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).