Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Sven Van Asbroeck <thesven73@gmail.com>
To: shawnguo@kernel.org, fugang.duan@nxp.com
Cc: Sascha Hauer <s.hauer@pengutronix.de>,
	linux-kernel@vger.kernel.org, NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 2/2] ARM: imx6plus: enable internal routing of clk_enet_ref where possible
Date: Thu, 25 Jun 2020 10:01:05 -0400
Message-ID: <20200625140105.14999-2-TheSven73@gmail.com> (raw)
In-Reply-To: <20200625140105.14999-1-TheSven73@gmail.com>

On imx6, the ethernet reference clock (clk_enet_ref) can be generated
by either the imx6, or an external source (e.g. an oscillator or the
PHY). When generated by the imx6, the clock source (from ANATOP)
must be routed to the input of clk_enet_ref via two pads on the SoC,
typically via a dedicated track on the PCB.

On an imx6 plus however, there is a new setting which enables this
clock to be routed internally on the SoC, from its ANATOP clock
source, straight to clk_enet_ref, without having to go through
the SoC pads.

Board designs where the clock is generated by the imx6 should not
be affected by routing the clock internally. Therefore on a plus,
we can enable internal routing by default.

Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
---
v3 -> v4:
  - avoid double-check for IS_ERR(gpr) by including Fabio Estevam's
    patch.
v2 -> v3:
  - remove check for imx6q, which is already implied when
    of_machine_is_compatible("fsl,imx6qp")
v1 -> v2:
  - Fabio Estevam: use of_machine_is_compatible() to determine if we
    are running on an imx6 plus.

To: Shawn Guo <shawnguo@kernel.org>
To: Andy Duan <fugang.duan@nxp.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org

 arch/arm/mach-imx/mach-imx6q.c              | 14 ++++++++++++++
 include/linux/mfd/syscon/imx6q-iomuxc-gpr.h |  1 +
 2 files changed, 15 insertions(+)

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index ae89ad93ca83..07cfe0d349c3 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -204,6 +204,20 @@ static void __init imx6q_1588_init(void)
 	regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_ENET_CLK_SEL_MASK,
 			   clksel);
 
+	/*
+	 * On imx6 plus, enet_ref from ANATOP/CCM can be internally routed to
+	 * be the PTP clock source, instead of having to be routed through
+	 * pads.
+	 * Board designs which route the ANATOP/CCM clock through pads are
+	 * unaffected when routing happens internally. So on these designs,
+	 * route internally by default.
+	 */
+	if (clksel == IMX6Q_GPR1_ENET_CLK_SEL_ANATOP &&
+			of_machine_is_compatible("fsl,imx6qp"))
+		regmap_update_bits(gpr, IOMUXC_GPR5,
+				IMX6Q_GPR5_ENET_TXCLK_SEL,
+				IMX6Q_GPR5_ENET_TXCLK_SEL);
+
 	clk_put(enet_ref);
 put_ptp_clk:
 	clk_put(ptp_clk);
diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
index d4b5e527a7a3..eb65d48da0df 100644
--- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
+++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
@@ -240,6 +240,7 @@
 #define IMX6Q_GPR4_IPU_RD_CACHE_CTL		BIT(0)
 
 #define IMX6Q_GPR5_L2_CLK_STOP			BIT(8)
+#define IMX6Q_GPR5_ENET_TXCLK_SEL		BIT(9)
 #define IMX6Q_GPR5_SATA_SW_PD			BIT(10)
 #define IMX6Q_GPR5_SATA_SW_RST			BIT(11)
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-25 14:01 [PATCH v4 1/2] ARM: imx: mach-imx6q: Search for fsl, imx6q-iomuxc-gpr earlier Sven Van Asbroeck
2020-06-25 14:01 ` Sven Van Asbroeck [this message]
2020-06-28  5:05   ` [EXT] [PATCH v4 2/2] ARM: imx6plus: enable internal routing of clk_enet_ref where possible Andy Duan
2020-06-29 13:09   ` Fabio Estevam
2020-06-29 13:40     ` Sven Van Asbroeck
2020-06-29 14:04       ` Fabio Estevam
2020-06-29 14:25       ` Fabio Estevam
2020-06-29 14:37         ` Sven Van Asbroeck
2020-06-30  6:36           ` [EXT] " Andy Duan
2020-06-30 11:49             ` Fabio Estevam
2020-07-01  1:31               ` Andy Duan
2020-06-30 15:23             ` Sven Van Asbroeck
2020-07-01  3:18               ` Andy Duan
2020-07-01  3:39                 ` Fabio Estevam
2020-07-01  3:42                   ` Andy Duan
2020-07-01  3:45                     ` Fabio Estevam
2020-07-01 13:51                       ` Sven Van Asbroeck
2020-07-01 15:30                         ` Andy Duan
2020-07-01 16:03                           ` Sven Van Asbroeck
2020-07-01 16:39                             ` Fabio Estevam
2020-06-30  2:24         ` Andy Duan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200625140105.14999-2-TheSven73@gmail.com \
    --to=thesven73@gmail.com \
    --cc=festevam@gmail.com \
    --cc=fugang.duan@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git