Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: Michael Walle <michael@walle.cc>
Cc: devicetree@vger.kernel.org, arnd@arndb.de,
	gregkh@linuxfoundation.org, linus.walleij@linaro.org,
	linux-kernel@vger.kernel.org, robh+dt@kernel.org,
	bgolaszewski@baylibre.com, broonie@kernel.org,
	andriy.shevchenko@linux.intel.com,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 1/1] mfd: Add I2C based System Configuaration (SYSCON) access
Date: Wed, 1 Jul 2020 08:04:34 +0100
Message-ID: <20200701070434.GP1179328@dell> (raw)
In-Reply-To: <f505c52d565ba7dbf05eef895782c410@walle.cc>

On Wed, 01 Jul 2020, Michael Walle wrote:

> Hi Lee,
> 
> Am 2020-06-30 11:16, schrieb Michael Walle:
> > I'm just trying to use this for my sl28 driver. Some remarks, see below.
> > 
> > Am 2020-06-22 09:51, schrieb Lee Jones:
> > > The existing SYSCON implementation only supports MMIO (memory mapped)
> > > accesses, facilitated by Regmap.  This extends support for registers
> > > held behind I2C busses.
> > > 
> > > Signed-off-by: Lee Jones <lee.jones@linaro.org>
> > > ---
> > > Changelog:
> > > 
> > > v3 => v4
> > >   - Add ability to provide a non-default Regmap configuration
> > > 
> > > v2 => v3
> > >   - Change 'is CONFIG' present check to include loadable modules
> > >     - s/#ifdef CONFIG_MFD_SYSCON_I2C/#if
> > > IS_ENABLED(CONFIG_MFD_SYSCON_I2C)/
> > > 
> > > v1 => v2
> > >   - Remove legacy references to OF
> > >   - Allow building as a module (fixes h8300 0-day issue)
> > > 
> > > drivers/mfd/Kconfig            |   7 +++
> > >  drivers/mfd/Makefile           |   1 +
> > >  drivers/mfd/syscon-i2c.c       | 104
> > > +++++++++++++++++++++++++++++++++
> > >  include/linux/mfd/syscon-i2c.h |  36 ++++++++++++
> > >  4 files changed, 148 insertions(+)
> > >  create mode 100644 drivers/mfd/syscon-i2c.c
> > >  create mode 100644 include/linux/mfd/syscon-i2c.h
> > > 
> > 
> > [..]
> > 
> > > +static struct regmap *syscon_i2c_get_regmap(struct i2c_client
> > > *client,
> > > +					    struct regmap_config *regmap_config)
> > > +{
> > > +	struct device *dev = &client->dev;
> > > +	struct syscon *entry, *syscon = NULL;
> > > +
> > > +	spin_lock(&syscon_i2c_list_slock);
> > > +
> > > +	list_for_each_entry(entry, &syscon_i2c_list, list)
> > > +		if (entry->dev == dev) {
> > > +			syscon = entry;
> > > +			break;
> > > +		}
> > > +
> > > +	spin_unlock(&syscon_i2c_list_slock);
> > > +
> > > +	if (!syscon)
> > > +		syscon = syscon_i2c_register(client, regmap_config);
> > > +
> > > +	if (IS_ERR(syscon))
> > > +		return ERR_CAST(syscon);
> > > +
> > > +	return syscon->regmap;
> > > +}
> > > +
> > > +struct regmap *syscon_i2c_to_regmap_config(struct i2c_client *client,
> > > +					   struct regmap_config *regmap_config)
> > > +{
> > > +	return syscon_i2c_get_regmap(client, regmap_config);
> > > +}
> > > +EXPORT_SYMBOL_GPL(syscon_i2c_to_regmap_config);
> > > +
> > > +struct regmap *syscon_i2c_to_regmap(struct i2c_client *client)
> > > +{
> > > +	return syscon_i2c_get_regmap(client, &syscon_i2c_regmap_config);
> > > +}
> > > +EXPORT_SYMBOL_GPL(syscon_i2c_to_regmap);
> > 
> > What do you think about
> > 
> > struct regmap *syscon_i2c_to_regmap(struct device *dev)
> > {
> > 	struct i2c_client *client = i2c_verify_client(dev);
> > 
> > 	if (!client)
> > 		return ERR_PTR(-EINVAL);
> > 
> > 	return syscon_i2c_get_regmap(client, &syscon_i2c_regmap_config);
> > }
> > 
> > Or even move it to syscon_i2c_get_regmap().
> > 
> > This way, (a) a driver doesn't have to use "#include <linux/i2c.h>" just
> > to call to_i2c_client() (or i2c_verify_client()) and (b) you won't do it
> > all over again in all sub drivers.
> > 
> > So you could just do a
> >   regmap = syscon_i2c_to_regmap(pdev->dev.parent);
> > 
> > I've also noticed that the mmio syscon uses device_node as parameter.
> > What
> > was the reason to divert from that? Just curious.
> 
> How is this supposed to be used?
> 
> I had something like the following in mind:
> 
> &i2c {
>   cpld@4a {
>     compatible = "simple-mfd";
>     reg = <0x4a>;
> 
>     gpio@4 {
>       compatible = "vendor,gpio";
>       reg = <0x4>;
>     };
>   };
> };

Yes, that was the idea.

> But I think the childen are not enumerated if its an I2C device. And
> the actual i2c driver is also missing.

What do you mean?  Can you elaborate?

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200622075145.1464020-1-lee.jones@linaro.org>
2020-06-30  9:16 ` Michael Walle
2020-06-30 22:32   ` Michael Walle
2020-07-01  7:04     ` Lee Jones [this message]
2020-07-01 21:01       ` Michael Walle
2020-07-02  6:54         ` Lee Jones
2020-07-02  7:02           ` Michael Walle
2020-07-02  8:18             ` Lee Jones
2020-07-02  9:12               ` Michael Walle
2020-07-02  7:14   ` Lee Jones
2020-07-02  7:21     ` Michael Walle
2020-07-05 13:10 ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200701070434.GP1179328@dell \
    --to=lee.jones@linaro.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=arnd@arndb.de \
    --cc=bgolaszewski@baylibre.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael@walle.cc \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git