From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
"Andrew F . Davis" <afd@ti.com>, Tero Kristo <t-kristo@ti.com>,
Santosh Shilimkar <ssantosh@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/6] soc: ti: omap-prm: Configure omap4 and 5 l4_abe power domain
Date: Thu, 2 Jul 2020 08:45:11 -0700 [thread overview]
Message-ID: <20200702154513.31859-5-tony@atomide.com> (raw)
In-Reply-To: <20200702154513.31859-1-tony@atomide.com>
Let's add omap4 and 5 l4_abe interconnect instance for the power
domain.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/soc/ti/omap_prm.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
--- a/drivers/soc/ti/omap_prm.c
+++ b/drivers/soc/ti/omap_prm.c
@@ -95,6 +95,13 @@ struct omap_reset_data {
#define PRM_ST_INTRANSITION BIT(20)
+static const struct omap_prm_domain_map omap_prm_all = {
+ .usable_modes = BIT(OMAP_PRMD_ON_ACTIVE) | BIT(OMAP_PRMD_ON_INACTIVE) |
+ BIT(OMAP_PRMD_RETENTION) | BIT(OMAP_PRMD_OFF),
+ .statechange = 1,
+ .logicretstate = 1,
+};
+
static const struct omap_prm_domain_map omap_prm_noinact = {
.usable_modes = BIT(OMAP_PRMD_ON_ACTIVE) | BIT(OMAP_PRMD_RETENTION) |
BIT(OMAP_PRMD_OFF),
@@ -102,6 +109,13 @@ static const struct omap_prm_domain_map omap_prm_noinact = {
.logicretstate = 1,
};
+static const struct omap_prm_domain_map omap_prm_nooff = {
+ .usable_modes = BIT(OMAP_PRMD_ON_ACTIVE) | BIT(OMAP_PRMD_ON_INACTIVE) |
+ BIT(OMAP_PRMD_RETENTION),
+ .statechange = 1,
+ .logicretstate = 1,
+};
+
static const struct omap_prm_domain_map omap_prm_onoff_noauto = {
.usable_modes = BIT(OMAP_PRMD_ON_ACTIVE) | BIT(OMAP_PRMD_OFF),
.statechange = 1,
@@ -127,6 +141,10 @@ static const struct omap_rst_map rst_map_012[] = {
static const struct omap_prm_data omap4_prm_data[] = {
{ .name = "tesla", .base = 0x4a306400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+ {
+ .name = "abe", .base = 0x4a306500,
+ .pwrstctrl = 0, .pwrstst = 0x4, .dmap = &omap_prm_all,
+ },
{ .name = "core", .base = 0x4a306700, .rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ducati", .rstmap = rst_map_012 },
{ .name = "ivahd", .base = 0x4a306f00, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012 },
{ .name = "device", .base = 0x4a307b00, .rstctrl = 0x0, .rstst = 0x4, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
@@ -135,6 +153,10 @@ static const struct omap_prm_data omap4_prm_data[] = {
static const struct omap_prm_data omap5_prm_data[] = {
{ .name = "dsp", .base = 0x4ae06400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+ {
+ .name = "abe", .base = 0x4ae06500,
+ .pwrstctrl = 0, .pwrstst = 0x4, .dmap = &omap_prm_nooff,
+ },
{ .name = "core", .base = 0x4ae06700, .rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ipu", .rstmap = rst_map_012 },
{ .name = "iva", .base = 0x4ae07200, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012 },
{ .name = "device", .base = 0x4ae07c00, .rstctrl = 0x0, .rstst = 0x4, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-07-02 15:46 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-02 15:45 [PATCHv4 0/6] Add initial genpd support for omap PRM driver Tony Lindgren
2020-07-02 15:45 ` [PATCH 1/6] dt-bindings: omap: Update PRM binding for genpd Tony Lindgren
2020-07-15 20:58 ` Rob Herring
2020-07-02 15:45 ` [PATCH 2/6] soc: ti: omap-prm: Add basic power domain support Tony Lindgren
2020-07-02 15:45 ` [PATCH 3/6] soc: ti: omap-prm: Configure sgx power domain for am3 and am4 Tony Lindgren
2020-07-02 15:45 ` Tony Lindgren [this message]
2020-07-02 15:45 ` [PATCH 5/6] ARM: dts: Configure am3 and am4 sgx for genpd and drop platform data Tony Lindgren
2020-07-02 15:45 ` [PATCH 6/6] ARM: dts: Configure omap4 and 5 l4_abe " Tony Lindgren
2020-08-17 6:53 ` [PATCHv4 0/6] Add initial genpd support for omap PRM driver Tony Lindgren
2020-08-17 15:25 ` santosh.shilimkar
2020-08-18 8:26 ` Tony Lindgren
-- strict thread matches above, loose matches on Subject: below --
2020-05-20 21:13 [PATCHv2 " Tony Lindgren
2020-05-20 21:13 ` [PATCH 4/6] soc: ti: omap-prm: Configure omap4 and 5 l4_abe power domain Tony Lindgren
2020-05-12 20:38 [PATCH 0/6] Add initial genpd support for omap PRM driver Tony Lindgren
2020-05-12 20:38 ` [PATCH 4/6] soc: ti: omap-prm: Configure omap4 and 5 l4_abe power domain Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200702154513.31859-5-tony@atomide.com \
--to=tony@atomide.com \
--cc=afd@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=robh@kernel.org \
--cc=ssantosh@kernel.org \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).