linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Lokesh Vutla <lokeshvutla@ti.com>
To: Nishanth Menon <nm@ti.com>, Tero Kristo <t-kristo@ti.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: Device Tree Mailing List <devicetree@vger.kernel.org>,
	Grygorii Strashko <grygorii.strashko@ti.com>,
	Lokesh Vutla <lokeshvutla@ti.com>, Sekhar Nori <nsekhar@ti.com>,
	Linux ARM Mailing List <linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v2 3/4] arm64: dts: ti: Add support for J7200 SoC
Date: Thu, 27 Aug 2020 12:21:43 +0530	[thread overview]
Message-ID: <20200827065144.17683-4-lokeshvutla@ti.com> (raw)
In-Reply-To: <20200827065144.17683-1-lokeshvutla@ti.com>

The J7200 SoC is a part of the K3 Multicore SoC architecture platform.
It is targeted for automotive gateway, vehicle compute systems,
Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications.
The SoC aims to meet the complex processing needs of modern embedded
products.

Some highlights of this SoC are:
* Dual Cortex-A72s in a single cluster, two clusters of lockstep
  capable dual Cortex-R5F MCUs and a Centralized Device Management and
  Security Controller (DMSC).
* Configurable L3 Cache and IO-coherent architecture with high data
  throughput capable distributed DMA architecture under NAVSS.
* Integrated Ethernet switch supporting up to a total of 4 external ports
  in addition to legacy Ethernet switch of up to 2 ports.
* Upto 1 PCIe-GEN3 controller, 1 USB3.0 Dual-role device subsystems,
  20 MCANs, 3 McASP, eMMC and SD, OSPI/HyperBus memory controller, I3C
  and I2C, eCAP/eQEP, eHRPWM among other peripherals.
* One hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL
  management.

See J7200 Technical Reference Manual (SPRUIU1, June 2020)
for further details: https://www.ti.com/lit/pdf/spruiu1

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     | 199 ++++++++++++++++++
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      |  84 ++++++++
 arch/arm64/boot/dts/ti/k3-j7200.dtsi          | 165 +++++++++++++++
 3 files changed, 448 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-j7200.dtsi

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
new file mode 100644
index 000000000000..70c8f7e941fb
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+	msmc_ram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x70000000 0x0 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x70000000 0x100000>;
+
+		atf-sram@0 {
+			reg = <0x0 0x20000>;
+		};
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01900000 0x00 0x100000>;	/* GICR */
+
+		/* vcpumntirq: virtual CPU interface maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_navss: navss@30000000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
+
+		secure_proxy_main: mailbox@32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	main_pmx0: pinmux@11c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x0 0x11c000 0x0 0x2b4>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 278 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 279 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 280 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 281 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 282 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 283 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart7: serial@2870000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02870000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 284 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart8: serial@2880000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02880000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 285 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart9: serial@2890000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02890000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 286 2>;
+		clock-names = "fclk";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
new file mode 100644
index 000000000000..670e4c7cd9fe
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu_wakeup {
+	dmsc: dmsc@44083000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+
+		mbox-names = "rx", "tx";
+
+		mboxes= <&secure_proxy_main 11>,
+			<&secure_proxy_main 13>;
+
+		reg-names = "debug_messages";
+		reg = <0x00 0x44083000 0x0 0x1000>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clocks {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	chipid@43000014 {
+		compatible = "ti,am654-chipid";
+		reg = <0x0 0x43000014 0x0 0x4>;
+	};
+
+	wkup_pmx0: pinmux@4301c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c000 0x00 0x178>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	mcu_ram: sram@41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x100000>;
+		ranges = <0x0 0x00 0x41c00000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	wkup_uart0: serial@42300000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x42300000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 287 2>;
+		clock-names = "fclk";
+	};
+
+	mcu_uart0: serial@40a00000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x40a00000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <96000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 149 2>;
+		clock-names = "fclk";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
new file mode 100644
index 000000000000..aadf707f25f5
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/k3.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+/ {
+	model = "Texas Instruments K3 J7200 SoC";
+	compatible = "ti,j7200";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		serial4 = &main_uart2;
+		serial5 = &main_uart3;
+		serial6 = &main_uart4;
+		serial7 = &main_uart5;
+		serial8 = &main_uart6;
+		serial9 = &main_uart7;
+		serial10 = &main_uart8;
+		serial11 = &main_uart9;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <2048>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a72_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@100000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
+			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT */
+
+			 /* MCUSS_WKUP Range */
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>;
+
+		cbass_mcu_wakeup: bus@28380000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>; /* FSS OSPI0/1 data region 0 */
+		};
+	};
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-j7200-main.dtsi"
+#include "k3-j7200-mcu-wakeup.dtsi"
-- 
2.28.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-08-27  6:53 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-27  6:51 [PATCH v2 0/4] arm64: Initial support for Texas Instrument's J7200 Platform Lokesh Vutla
2020-08-27  6:51 ` [PATCH v2 1/4] dt-bindings: arm: ti: Convert K3 board/soc bindings to DT schema Lokesh Vutla
2020-08-28  0:41   ` Nishanth Menon
2020-08-28  3:14     ` Lokesh Vutla
2020-08-28  3:47       ` Suman Anna
2020-08-28 13:07       ` Nishanth Menon
2020-09-04 11:55       ` Nishanth Menon
2020-09-04  7:15   ` Lokesh Vutla
2020-08-27  6:51 ` [PATCH v2 2/4] dt-bindings: arm: ti: Add bindings for J7200 SoC Lokesh Vutla
2020-08-27  6:51 ` Lokesh Vutla [this message]
2020-08-27 17:04   ` [PATCH v2 3/4] arm64: dts: ti: Add support " Suman Anna
2020-09-08 11:47     ` Nishanth Menon
2020-08-31  9:13   ` Peter Ujfalusi
2020-09-02  3:51     ` Lokesh Vutla
2020-08-27  6:51 ` [PATCH v2 4/4] arm64: dts: ti: Add support for J7200 Common Processor Board Lokesh Vutla
2020-09-08 11:57   ` Nishanth Menon
2020-08-27  9:09 ` [PATCH v2 0/4] arm64: Initial support for Texas Instrument's J7200 Platform Grygorii Strashko
2020-09-07 12:02 ` Lokesh Vutla
2020-09-07 14:14   ` Nishanth Menon
2020-09-07 14:23     ` Lokesh Vutla
2020-09-07 23:48       ` Nishanth Menon
2020-09-08  9:55         ` Tero Kristo
2020-09-08 11:25           ` Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200827065144.17683-4-lokeshvutla@ti.com \
    --to=lokeshvutla@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=grygorii.strashko@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=nm@ti.com \
    --cc=nsekhar@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=t-kristo@ti.com \
    --subject='Re: [PATCH v2 3/4] arm64: dts: ti: Add support for J7200 SoC' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).