* [PATCH 0/9] ARM: imx: Remove more board related code
@ 2020-09-11 12:40 Fabio Estevam
2020-09-11 12:40 ` [PATCH 1/9] ARM: imx27: Remove imx27_soc_init() Fabio Estevam
` (9 more replies)
0 siblings, 10 replies; 13+ messages in thread
From: Fabio Estevam @ 2020-09-11 12:40 UTC (permalink / raw)
To: shawnguo; +Cc: linux-arm-kernel, Fabio Estevam, arnd, linux-imx, kernel
Now that i.MX board files have been removed, here is another
round of cleanup that removes unused code.
Fabio Estevam (9):
ARM: imx27: Remove imx27_soc_init()
ARM: imx27: Remove iomux-v1 board code
ARM: imx27: Get rid of mm-imx27.c
ARM: imx27: Retrieve AVIC base address from devicetree
ARM: imx31: Remove remaining i.MX31 board code
ARM: imx3: Remove imx3 soc_init()
ARM: imx: Remove iomux-v3 board code
ARM: imx: Remove imx device directory
ARM: imx: Remove remnant board file support pieces
arch/arm/mach-imx/3ds_debugboard.c | 207 ---
arch/arm/mach-imx/3ds_debugboard.h | 11 -
arch/arm/mach-imx/Kconfig | 11 -
arch/arm/mach-imx/Makefile | 9 +-
arch/arm/mach-imx/board-mx31lilly.h | 28 -
arch/arm/mach-imx/board-mx31lite.h | 29 -
arch/arm/mach-imx/board-mx31moboard.h | 30 -
arch/arm/mach-imx/common.h | 15 -
arch/arm/mach-imx/devices-imx27.h | 86 --
arch/arm/mach-imx/devices-imx31.h | 80 --
arch/arm/mach-imx/devices-imx35.h | 87 --
arch/arm/mach-imx/devices/Kconfig | 71 -
arch/arm/mach-imx/devices/Makefile | 28 -
arch/arm/mach-imx/devices/devices-common.h | 293 ----
arch/arm/mach-imx/devices/devices.c | 35 -
arch/arm/mach-imx/devices/platform-fec.c | 49 -
arch/arm/mach-imx/devices/platform-flexcan.c | 45 -
.../mach-imx/devices/platform-fsl-usb2-udc.c | 51 -
arch/arm/mach-imx/devices/platform-gpio-mxc.c | 31 -
.../arm/mach-imx/devices/platform-gpio_keys.c | 15 -
arch/arm/mach-imx/devices/platform-imx-dma.c | 44 -
arch/arm/mach-imx/devices/platform-imx-fb.c | 47 -
arch/arm/mach-imx/devices/platform-imx-i2c.c | 74 -
.../mach-imx/devices/platform-imx-keypad.c | 54 -
arch/arm/mach-imx/devices/platform-imx-ssi.c | 86 --
arch/arm/mach-imx/devices/platform-imx-uart.c | 92 --
arch/arm/mach-imx/devices/platform-imx2-wdt.c | 52 -
.../arm/mach-imx/devices/platform-imx21-hcd.c | 38 -
.../mach-imx/devices/platform-imx27-coda.c | 34 -
arch/arm/mach-imx/devices/platform-ipu-core.c | 127 --
.../mach-imx/devices/platform-mx2-camera.c | 59 -
arch/arm/mach-imx/devices/platform-mx2-emma.c | 37 -
arch/arm/mach-imx/devices/platform-mxc-ehci.c | 61 -
arch/arm/mach-imx/devices/platform-mxc-mmc.c | 72 -
arch/arm/mach-imx/devices/platform-mxc_nand.c | 72 -
arch/arm/mach-imx/devices/platform-mxc_rtc.c | 43 -
arch/arm/mach-imx/devices/platform-mxc_w1.c | 47 -
arch/arm/mach-imx/devices/platform-pata_imx.c | 45 -
.../devices/platform-sdhci-esdhc-imx.c | 64 -
arch/arm/mach-imx/devices/platform-spi_imx.c | 78 -
arch/arm/mach-imx/hardware.h | 1 -
arch/arm/mach-imx/iomux-imx31.c | 161 ---
arch/arm/mach-imx/iomux-mx21.h | 109 --
arch/arm/mach-imx/iomux-mx27.h | 192 ---
arch/arm/mach-imx/iomux-mx2x.h | 217 ---
arch/arm/mach-imx/iomux-mx3.h | 706 ----------
arch/arm/mach-imx/iomux-mx35.h | 1254 -----------------
arch/arm/mach-imx/iomux-v1.c | 174 ---
arch/arm/mach-imx/iomux-v1.h | 81 --
arch/arm/mach-imx/iomux-v3.c | 65 -
arch/arm/mach-imx/iomux-v3.h | 130 --
arch/arm/mach-imx/mach-imx27.c | 55 +
arch/arm/mach-imx/mach-mx31ads.c | 579 --------
arch/arm/mach-imx/mm-imx27.c | 88 --
arch/arm/mach-imx/mm-imx3.c | 162 ---
arch/arm/mach-imx/mx21.h | 176 ---
arch/arm/mach-imx/mx31lite-db.c | 154 --
arch/arm/mach-imx/pcm037.h | 18 -
arch/arm/mach-imx/ulpi.h | 20 -
59 files changed, 57 insertions(+), 6722 deletions(-)
delete mode 100644 arch/arm/mach-imx/3ds_debugboard.c
delete mode 100644 arch/arm/mach-imx/3ds_debugboard.h
delete mode 100644 arch/arm/mach-imx/board-mx31lilly.h
delete mode 100644 arch/arm/mach-imx/board-mx31lite.h
delete mode 100644 arch/arm/mach-imx/board-mx31moboard.h
delete mode 100644 arch/arm/mach-imx/devices-imx27.h
delete mode 100644 arch/arm/mach-imx/devices-imx31.h
delete mode 100644 arch/arm/mach-imx/devices-imx35.h
delete mode 100644 arch/arm/mach-imx/devices/Kconfig
delete mode 100644 arch/arm/mach-imx/devices/Makefile
delete mode 100644 arch/arm/mach-imx/devices/devices-common.h
delete mode 100644 arch/arm/mach-imx/devices/devices.c
delete mode 100644 arch/arm/mach-imx/devices/platform-fec.c
delete mode 100644 arch/arm/mach-imx/devices/platform-flexcan.c
delete mode 100644 arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
delete mode 100644 arch/arm/mach-imx/devices/platform-gpio-mxc.c
delete mode 100644 arch/arm/mach-imx/devices/platform-gpio_keys.c
delete mode 100644 arch/arm/mach-imx/devices/platform-imx-dma.c
delete mode 100644 arch/arm/mach-imx/devices/platform-imx-fb.c
delete mode 100644 arch/arm/mach-imx/devices/platform-imx-i2c.c
delete mode 100644 arch/arm/mach-imx/devices/platform-imx-keypad.c
delete mode 100644 arch/arm/mach-imx/devices/platform-imx-ssi.c
delete mode 100644 arch/arm/mach-imx/devices/platform-imx-uart.c
delete mode 100644 arch/arm/mach-imx/devices/platform-imx2-wdt.c
delete mode 100644 arch/arm/mach-imx/devices/platform-imx21-hcd.c
delete mode 100644 arch/arm/mach-imx/devices/platform-imx27-coda.c
delete mode 100644 arch/arm/mach-imx/devices/platform-ipu-core.c
delete mode 100644 arch/arm/mach-imx/devices/platform-mx2-camera.c
delete mode 100644 arch/arm/mach-imx/devices/platform-mx2-emma.c
delete mode 100644 arch/arm/mach-imx/devices/platform-mxc-ehci.c
delete mode 100644 arch/arm/mach-imx/devices/platform-mxc-mmc.c
delete mode 100644 arch/arm/mach-imx/devices/platform-mxc_nand.c
delete mode 100644 arch/arm/mach-imx/devices/platform-mxc_rtc.c
delete mode 100644 arch/arm/mach-imx/devices/platform-mxc_w1.c
delete mode 100644 arch/arm/mach-imx/devices/platform-pata_imx.c
delete mode 100644 arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
delete mode 100644 arch/arm/mach-imx/devices/platform-spi_imx.c
delete mode 100644 arch/arm/mach-imx/iomux-imx31.c
delete mode 100644 arch/arm/mach-imx/iomux-mx21.h
delete mode 100644 arch/arm/mach-imx/iomux-mx27.h
delete mode 100644 arch/arm/mach-imx/iomux-mx2x.h
delete mode 100644 arch/arm/mach-imx/iomux-mx3.h
delete mode 100644 arch/arm/mach-imx/iomux-mx35.h
delete mode 100644 arch/arm/mach-imx/iomux-v1.c
delete mode 100644 arch/arm/mach-imx/iomux-v1.h
delete mode 100644 arch/arm/mach-imx/iomux-v3.c
delete mode 100644 arch/arm/mach-imx/iomux-v3.h
delete mode 100644 arch/arm/mach-imx/mach-mx31ads.c
delete mode 100644 arch/arm/mach-imx/mm-imx27.c
delete mode 100644 arch/arm/mach-imx/mx21.h
delete mode 100644 arch/arm/mach-imx/mx31lite-db.c
delete mode 100644 arch/arm/mach-imx/pcm037.h
delete mode 100644 arch/arm/mach-imx/ulpi.h
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 1/9] ARM: imx27: Remove imx27_soc_init()
2020-09-11 12:40 [PATCH 0/9] ARM: imx: Remove more board related code Fabio Estevam
@ 2020-09-11 12:40 ` Fabio Estevam
2020-09-11 12:40 ` [PATCH 2/9] ARM: imx27: Remove iomux-v1 board code Fabio Estevam
` (8 subsequent siblings)
9 siblings, 0 replies; 13+ messages in thread
From: Fabio Estevam @ 2020-09-11 12:40 UTC (permalink / raw)
To: shawnguo; +Cc: linux-arm-kernel, Fabio Estevam, arnd, linux-imx, kernel
imx27_soc_init() was only used by i.MX27 board files. Since the
board files users are gone, it is safe to remove imx27_soc_init() too.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
arch/arm/mach-imx/common.h | 1 -
arch/arm/mach-imx/mm-imx27.c | 26 --------------------------
2 files changed, 27 deletions(-)
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 72c3fcc32910..9c1c51c5f46f 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -31,7 +31,6 @@ void mx27_init_irq(void);
void mx31_init_irq(void);
void mx35_init_irq(void);
void imx21_soc_init(void);
-void imx27_soc_init(void);
void imx31_soc_init(void);
void imx35_soc_init(void);
int mx21_clocks_init(unsigned long lref, unsigned long fref);
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index 2717614f101d..caf1da1754f6 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -60,29 +60,3 @@ void __init mx27_init_irq(void)
{
mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
}
-
-static const struct resource imx27_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX27_AUDMUX_BASE_ADDR, SZ_4K),
-};
-
-void __init imx27_soc_init(void)
-{
- mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
- mxc_device_init();
-
- /* i.mx27 has the i.mx21 type gpio */
- mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
- mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
-
- pinctrl_provide_dummies();
- imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR, MX27_INT_DMACH0);
- /* imx27 has the imx21 type audmux */
- platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res,
- ARRAY_SIZE(imx27_audmux_res));
-
- imx27_pm_init();
-}
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 2/9] ARM: imx27: Remove iomux-v1 board code
2020-09-11 12:40 [PATCH 0/9] ARM: imx: Remove more board related code Fabio Estevam
2020-09-11 12:40 ` [PATCH 1/9] ARM: imx27: Remove imx27_soc_init() Fabio Estevam
@ 2020-09-11 12:40 ` Fabio Estevam
2020-09-11 12:40 ` [PATCH 3/9] ARM: imx27: Get rid of mm-imx27.c Fabio Estevam
` (7 subsequent siblings)
9 siblings, 0 replies; 13+ messages in thread
From: Fabio Estevam @ 2020-09-11 12:40 UTC (permalink / raw)
To: shawnguo; +Cc: linux-arm-kernel, Fabio Estevam, arnd, linux-imx, kernel
IMX_HAVE_IOMUX_V1 was only used by i.MX27 board files. Since the
board files users are gone, it is safe to remove iomux-v1 related
code.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
arch/arm/mach-imx/Kconfig | 4 -
arch/arm/mach-imx/Makefile | 1 -
arch/arm/mach-imx/iomux-v1.c | 174 -----------------------------------
arch/arm/mach-imx/mm-imx27.c | 4 -
4 files changed, 183 deletions(-)
delete mode 100644 arch/arm/mach-imx/iomux-v1.c
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index c23e10fa8242..138c5344f2f2 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -47,9 +47,6 @@ config HAVE_IMX_SRC
def_bool y if SMP
select ARCH_HAS_RESET_CONTROLLER
-config IMX_HAVE_IOMUX_V1
- bool
-
config ARCH_MXC_IOMUX_V3
bool
@@ -99,7 +96,6 @@ config SOC_IMX25
config SOC_IMX27
bool "i.MX27 support"
- select IMX_HAVE_IOMUX_V1
select CPU_ARM926T
select MXC_AVIC
select PINCTRL_IMX27
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index ca35d3e4cab4..7fe3060c300e 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -11,7 +11,6 @@ obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o mach-imx35.o
imx5-pm-$(CONFIG_PM) += pm-imx5.o
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y)
-obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_TZIC) += tzic.o
diff --git a/arch/arm/mach-imx/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c
deleted file mode 100644
index a4bec3b9b2b3..000000000000
--- a/arch/arm/mach-imx/iomux-v1.c
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/plat-mxc/iomux-v1.c
- *
- * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH
- * Copyright (C) 2009 Uwe Kleine-Koenig, Pengutronix
- *
- * Common code for i.MX1, i.MX21 and i.MX27
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/map.h>
-
-#include "hardware.h"
-#include "iomux-v1.h"
-
-static void __iomem *imx_iomuxv1_baseaddr;
-static unsigned imx_iomuxv1_numports;
-
-static inline unsigned long imx_iomuxv1_readl(unsigned offset)
-{
- return imx_readl(imx_iomuxv1_baseaddr + offset);
-}
-
-static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset)
-{
- imx_writel(val, imx_iomuxv1_baseaddr + offset);
-}
-
-static inline void imx_iomuxv1_rmwl(unsigned offset,
- unsigned long mask, unsigned long value)
-{
- unsigned long reg = imx_iomuxv1_readl(offset);
-
- reg &= ~mask;
- reg |= value;
-
- imx_iomuxv1_writel(reg, offset);
-}
-
-static inline void imx_iomuxv1_set_puen(
- unsigned int port, unsigned int pin, int on)
-{
- unsigned long mask = 1 << pin;
-
- imx_iomuxv1_rmwl(MXC_PUEN(port), mask, on ? mask : 0);
-}
-
-static inline void imx_iomuxv1_set_ddir(
- unsigned int port, unsigned int pin, int out)
-{
- unsigned long mask = 1 << pin;
-
- imx_iomuxv1_rmwl(MXC_DDIR(port), mask, out ? mask : 0);
-}
-
-static inline void imx_iomuxv1_set_gpr(
- unsigned int port, unsigned int pin, int af)
-{
- unsigned long mask = 1 << pin;
-
- imx_iomuxv1_rmwl(MXC_GPR(port), mask, af ? mask : 0);
-}
-
-static inline void imx_iomuxv1_set_gius(
- unsigned int port, unsigned int pin, int inuse)
-{
- unsigned long mask = 1 << pin;
-
- imx_iomuxv1_rmwl(MXC_GIUS(port), mask, inuse ? mask : 0);
-}
-
-static inline void imx_iomuxv1_set_ocr(
- unsigned int port, unsigned int pin, unsigned int ocr)
-{
- unsigned long shift = (pin & 0xf) << 1;
- unsigned long mask = 3 << shift;
- unsigned long value = ocr << shift;
- unsigned long offset = pin < 16 ? MXC_OCR1(port) : MXC_OCR2(port);
-
- imx_iomuxv1_rmwl(offset, mask, value);
-}
-
-static inline void imx_iomuxv1_set_iconfa(
- unsigned int port, unsigned int pin, unsigned int aout)
-{
- unsigned long shift = (pin & 0xf) << 1;
- unsigned long mask = 3 << shift;
- unsigned long value = aout << shift;
- unsigned long offset = pin < 16 ? MXC_ICONFA1(port) : MXC_ICONFA2(port);
-
- imx_iomuxv1_rmwl(offset, mask, value);
-}
-
-static inline void imx_iomuxv1_set_iconfb(
- unsigned int port, unsigned int pin, unsigned int bout)
-{
- unsigned long shift = (pin & 0xf) << 1;
- unsigned long mask = 3 << shift;
- unsigned long value = bout << shift;
- unsigned long offset = pin < 16 ? MXC_ICONFB1(port) : MXC_ICONFB2(port);
-
- imx_iomuxv1_rmwl(offset, mask, value);
-}
-
-int mxc_gpio_mode(int gpio_mode)
-{
- unsigned int pin = gpio_mode & GPIO_PIN_MASK;
- unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
- unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
- unsigned int aout = (gpio_mode >> GPIO_AOUT_SHIFT) & 3;
- unsigned int bout = (gpio_mode >> GPIO_BOUT_SHIFT) & 3;
-
- if (port >= imx_iomuxv1_numports)
- return -EINVAL;
-
- /* Pullup enable */
- imx_iomuxv1_set_puen(port, pin, gpio_mode & GPIO_PUEN);
-
- /* Data direction */
- imx_iomuxv1_set_ddir(port, pin, gpio_mode & GPIO_OUT);
-
- /* Primary / alternate function */
- imx_iomuxv1_set_gpr(port, pin, gpio_mode & GPIO_AF);
-
- /* use as gpio? */
- imx_iomuxv1_set_gius(port, pin, !(gpio_mode & (GPIO_PF | GPIO_AF)));
-
- imx_iomuxv1_set_ocr(port, pin, ocr);
-
- imx_iomuxv1_set_iconfa(port, pin, aout);
-
- imx_iomuxv1_set_iconfb(port, pin, bout);
-
- return 0;
-}
-
-static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
-{
- size_t i;
- int ret = 0;
-
- for (i = 0; i < count; ++i) {
- ret = mxc_gpio_mode(list[i]);
-
- if (ret)
- return ret;
- }
-
- return ret;
-}
-
-int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
- const char *label)
-{
- int ret;
-
- ret = imx_iomuxv1_setup_multiple(pin_list, count);
- return ret;
-}
-
-int __init imx_iomuxv1_init(void __iomem *base, int numports)
-{
- imx_iomuxv1_baseaddr = base;
- imx_iomuxv1_numports = numports;
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index caf1da1754f6..17345066b043 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -7,13 +7,11 @@
#include <linux/mm.h>
#include <linux/init.h>
-#include <linux/pinctrl/machine.h>
#include <asm/mach/map.h>
#include "common.h"
#include "devices/devices-common.h"
#include "hardware.h"
-#include "iomux-v1.h"
/* MX27 memory map definition */
static struct map_desc imx27_io_desc[] __initdata = {
@@ -52,8 +50,6 @@ void __init mx27_map_io(void)
void __init imx27_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX27);
- imx_iomuxv1_init(MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR),
- MX27_NUM_GPIO_PORT);
}
void __init mx27_init_irq(void)
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 3/9] ARM: imx27: Get rid of mm-imx27.c
2020-09-11 12:40 [PATCH 0/9] ARM: imx: Remove more board related code Fabio Estevam
2020-09-11 12:40 ` [PATCH 1/9] ARM: imx27: Remove imx27_soc_init() Fabio Estevam
2020-09-11 12:40 ` [PATCH 2/9] ARM: imx27: Remove iomux-v1 board code Fabio Estevam
@ 2020-09-11 12:40 ` Fabio Estevam
2020-09-11 12:40 ` [PATCH 4/9] ARM: imx27: Retrieve AVIC base address from devicetree Fabio Estevam
` (6 subsequent siblings)
9 siblings, 0 replies; 13+ messages in thread
From: Fabio Estevam @ 2020-09-11 12:40 UTC (permalink / raw)
To: shawnguo; +Cc: linux-arm-kernel, Fabio Estevam, arnd, linux-imx, kernel
Get rid of mm-imx27.c and move its code to the mach-imx27.c file.
This aligns with other i.MX SoC code.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
arch/arm/mach-imx/Makefile | 2 +-
arch/arm/mach-imx/common.h | 3 --
arch/arm/mach-imx/mach-imx27.c | 49 ++++++++++++++++++++++++++++
arch/arm/mach-imx/mm-imx27.c | 58 ----------------------------------
4 files changed, 50 insertions(+), 62 deletions(-)
delete mode 100644 arch/arm/mach-imx/mm-imx27.c
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 7fe3060c300e..a976b120ad45 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -3,7 +3,7 @@ obj-y := cpu.o system.o irq-common.o
obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o
-obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o mach-imx27.o mm-imx27.o
+obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o mach-imx27.o
obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o mach-imx31.o
obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o mach-imx35.o
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 9c1c51c5f46f..6dd86b99cc68 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -18,16 +18,13 @@ enum mxc_cpu_pwr_mode;
struct of_device_id;
void mx21_map_io(void);
-void mx27_map_io(void);
void mx31_map_io(void);
void mx35_map_io(void);
void imx21_init_early(void);
-void imx27_init_early(void);
void imx31_init_early(void);
void imx35_init_early(void);
void mxc_init_irq(void __iomem *);
void mx21_init_irq(void);
-void mx27_init_irq(void);
void mx31_init_irq(void);
void mx35_init_irq(void);
void imx21_soc_init(void);
diff --git a/arch/arm/mach-imx/mach-imx27.c b/arch/arm/mach-imx/mach-imx27.c
index 29d97bd64381..2d981d1eafbf 100644
--- a/arch/arm/mach-imx/mach-imx27.c
+++ b/arch/arm/mach-imx/mach-imx27.c
@@ -3,15 +3,64 @@
* Copyright 2012 Sascha Hauer, Pengutronix
*/
+#include <linux/init.h>
#include <linux/irq.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <linux/mm.h>
#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include "common.h"
+#include "devices/devices-common.h"
+#include "hardware.h"
#include "mx27.h"
+/* MX27 memory map definition */
+static struct map_desc imx27_io_desc[] __initdata = {
+ /*
+ * this fixed mapping covers:
+ * - AIPI1
+ * - AIPI2
+ * - AITC
+ * - ROM Patch
+ * - and some reserved space
+ */
+ imx_map_entry(MX27, AIPI, MT_DEVICE),
+ /*
+ * this fixed mapping covers:
+ * - CSI
+ * - ATA
+ */
+ imx_map_entry(MX27, SAHB1, MT_DEVICE),
+ /*
+ * this fixed mapping covers:
+ * - EMI
+ */
+ imx_map_entry(MX27, X_MEMC, MT_DEVICE),
+};
+
+/*
+ * Initialize the memory map. It is called during the
+ * system startup to create static physical to virtual
+ * memory map for the IO modules.
+ */
+static void __init mx27_map_io(void)
+{
+ iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
+}
+
+static void __init imx27_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX27);
+}
+
+static void __init mx27_init_irq(void)
+{
+ mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
+}
+
static const char * const imx27_dt_board_compat[] __initconst = {
"fsl,imx27",
NULL
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
deleted file mode 100644
index 17345066b043..000000000000
--- a/arch/arm/mach-imx/mm-imx27.c
+++ /dev/null
@@ -1,58 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-imx/mm-imx27.c
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices/devices-common.h"
-#include "hardware.h"
-
-/* MX27 memory map definition */
-static struct map_desc imx27_io_desc[] __initdata = {
- /*
- * this fixed mapping covers:
- * - AIPI1
- * - AIPI2
- * - AITC
- * - ROM Patch
- * - and some reserved space
- */
- imx_map_entry(MX27, AIPI, MT_DEVICE),
- /*
- * this fixed mapping covers:
- * - CSI
- * - ATA
- */
- imx_map_entry(MX27, SAHB1, MT_DEVICE),
- /*
- * this fixed mapping covers:
- * - EMI
- */
- imx_map_entry(MX27, X_MEMC, MT_DEVICE),
-};
-
-/*
- * Initialize the memory map. It is called during the
- * system startup to create static physical to virtual
- * memory map for the IO modules.
- */
-void __init mx27_map_io(void)
-{
- iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
-}
-
-void __init imx27_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX27);
-}
-
-void __init mx27_init_irq(void)
-{
- mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
-}
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 4/9] ARM: imx27: Retrieve AVIC base address from devicetree
2020-09-11 12:40 [PATCH 0/9] ARM: imx: Remove more board related code Fabio Estevam
` (2 preceding siblings ...)
2020-09-11 12:40 ` [PATCH 3/9] ARM: imx27: Get rid of mm-imx27.c Fabio Estevam
@ 2020-09-11 12:40 ` Fabio Estevam
2020-09-11 14:29 ` Arnd Bergmann
2020-09-11 12:40 ` [PATCH 5/9] ARM: imx31: Remove remaining i.MX31 board code Fabio Estevam
` (5 subsequent siblings)
9 siblings, 1 reply; 13+ messages in thread
From: Fabio Estevam @ 2020-09-11 12:40 UTC (permalink / raw)
To: shawnguo; +Cc: linux-arm-kernel, Fabio Estevam, arnd, linux-imx, kernel
Now that imx27 has been converted to a devicetree-only platform,
retrieve the AVIC base address from devicetree.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
arch/arm/mach-imx/mach-imx27.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/mach-imx27.c b/arch/arm/mach-imx/mach-imx27.c
index 2d981d1eafbf..84396ccf23f2 100644
--- a/arch/arm/mach-imx/mach-imx27.c
+++ b/arch/arm/mach-imx/mach-imx27.c
@@ -5,6 +5,7 @@
#include <linux/init.h>
#include <linux/irq.h>
+#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/mm.h>
@@ -58,7 +59,13 @@ static void __init imx27_init_early(void)
static void __init mx27_init_irq(void)
{
- mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
+ void __iomem *avic_base;
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,avic");
+ avic_base = of_iomap(np, 0);
+ BUG_ON(!avic_base);
+ mxc_init_irq(avic_base);
}
static const char * const imx27_dt_board_compat[] __initconst = {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 5/9] ARM: imx31: Remove remaining i.MX31 board code
2020-09-11 12:40 [PATCH 0/9] ARM: imx: Remove more board related code Fabio Estevam
` (3 preceding siblings ...)
2020-09-11 12:40 ` [PATCH 4/9] ARM: imx27: Retrieve AVIC base address from devicetree Fabio Estevam
@ 2020-09-11 12:40 ` Fabio Estevam
2020-09-11 12:40 ` [PATCH 6/9] ARM: imx3: Remove imx3 soc_init() Fabio Estevam
` (4 subsequent siblings)
9 siblings, 0 replies; 13+ messages in thread
From: Fabio Estevam @ 2020-09-11 12:40 UTC (permalink / raw)
To: shawnguo; +Cc: linux-arm-kernel, Fabio Estevam, arnd, linux-imx, kernel
i.MX31 is a devicetree only platform.
Remove remaining i.MX31 board code.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
arch/arm/mach-imx/3ds_debugboard.c | 207 ---------
arch/arm/mach-imx/3ds_debugboard.h | 11 -
arch/arm/mach-imx/board-mx31lilly.h | 28 --
arch/arm/mach-imx/board-mx31lite.h | 29 --
arch/arm/mach-imx/board-mx31moboard.h | 30 --
arch/arm/mach-imx/mach-mx31ads.c | 579 --------------------------
arch/arm/mach-imx/mx31lite-db.c | 154 -------
arch/arm/mach-imx/pcm037.h | 18 -
8 files changed, 1056 deletions(-)
delete mode 100644 arch/arm/mach-imx/3ds_debugboard.c
delete mode 100644 arch/arm/mach-imx/3ds_debugboard.h
delete mode 100644 arch/arm/mach-imx/board-mx31lilly.h
delete mode 100644 arch/arm/mach-imx/board-mx31lite.h
delete mode 100644 arch/arm/mach-imx/board-mx31moboard.h
delete mode 100644 arch/arm/mach-imx/mach-mx31ads.c
delete mode 100644 arch/arm/mach-imx/mx31lite-db.c
delete mode 100644 arch/arm/mach-imx/pcm037.h
diff --git a/arch/arm/mach-imx/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c
deleted file mode 100644
index 0e018000715a..000000000000
--- a/arch/arm/mach-imx/3ds_debugboard.c
+++ /dev/null
@@ -1,207 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/smsc911x.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include "3ds_debugboard.h"
-#include "hardware.h"
-
-/* LAN9217 ethernet base address */
-#define LAN9217_BASE_ADDR(n) (n + 0x0)
-/* External UART */
-#define UARTA_BASE_ADDR(n) (n + 0x8000)
-#define UARTB_BASE_ADDR(n) (n + 0x10000)
-
-#define BOARD_IO_ADDR(n) (n + 0x20000)
-/* LED switchs */
-#define LED_SWITCH_REG 0x00
-/* buttons */
-#define SWITCH_BUTTONS_REG 0x08
-/* status, interrupt */
-#define INTR_STATUS_REG 0x10
-#define INTR_MASK_REG 0x38
-#define INTR_RESET_REG 0x20
-/* magic word for debug CPLD */
-#define MAGIC_NUMBER1_REG 0x40
-#define MAGIC_NUMBER2_REG 0x48
-/* CPLD code version */
-#define CPLD_CODE_VER_REG 0x50
-/* magic word for debug CPLD */
-#define MAGIC_NUMBER3_REG 0x58
-/* module reset register*/
-#define MODULE_RESET_REG 0x60
-/* CPU ID and Personality ID */
-#define MCU_BOARD_ID_REG 0x68
-
-#define MXC_MAX_EXP_IO_LINES 16
-
-/* interrupts like external uart , external ethernet etc*/
-#define EXPIO_INT_ENET 0
-#define EXPIO_INT_XUART_A 1
-#define EXPIO_INT_XUART_B 2
-#define EXPIO_INT_BUTTON_A 3
-#define EXPIO_INT_BUTTON_B 4
-
-static void __iomem *brd_io;
-static struct irq_domain *domain;
-
-static struct resource smsc911x_resources[] = {
- {
- .flags = IORESOURCE_MEM,
- } , {
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
-};
-
-static struct platform_device smsc_lan9217_device = {
- .name = "smsc911x",
- .id = -1,
- .dev = {
- .platform_data = &smsc911x_config,
- },
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
-};
-
-static void mxc_expio_irq_handler(struct irq_desc *desc)
-{
- u32 imr_val;
- u32 int_valid;
- u32 expio_irq;
-
- /* irq = gpio irq number */
- desc->irq_data.chip->irq_mask(&desc->irq_data);
-
- imr_val = imx_readw(brd_io + INTR_MASK_REG);
- int_valid = imx_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
-
- expio_irq = 0;
- for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
- if ((int_valid & 1) == 0)
- continue;
- generic_handle_irq(irq_find_mapping(domain, expio_irq));
- }
-
- desc->irq_data.chip->irq_ack(&desc->irq_data);
- desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-/*
- * Disable an expio pin's interrupt by setting the bit in the imr.
- * Irq is an expio virtual irq number
- */
-static void expio_mask_irq(struct irq_data *d)
-{
- u16 reg;
- u32 expio = d->hwirq;
-
- reg = imx_readw(brd_io + INTR_MASK_REG);
- reg |= (1 << expio);
- imx_writew(reg, brd_io + INTR_MASK_REG);
-}
-
-static void expio_ack_irq(struct irq_data *d)
-{
- u32 expio = d->hwirq;
-
- imx_writew(1 << expio, brd_io + INTR_RESET_REG);
- imx_writew(0, brd_io + INTR_RESET_REG);
- expio_mask_irq(d);
-}
-
-static void expio_unmask_irq(struct irq_data *d)
-{
- u16 reg;
- u32 expio = d->hwirq;
-
- reg = imx_readw(brd_io + INTR_MASK_REG);
- reg &= ~(1 << expio);
- imx_writew(reg, brd_io + INTR_MASK_REG);
-}
-
-static struct irq_chip expio_irq_chip = {
- .irq_ack = expio_ack_irq,
- .irq_mask = expio_mask_irq,
- .irq_unmask = expio_unmask_irq,
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-int __init mxc_expio_init(u32 base, u32 intr_gpio)
-{
- u32 p_irq = gpio_to_irq(intr_gpio);
- int irq_base;
- int i;
-
- brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K);
- if (brd_io == NULL)
- return -ENOMEM;
-
- if ((imx_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
- (imx_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
- (imx_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
- pr_info("3-Stack Debug board not detected\n");
- iounmap(brd_io);
- brd_io = NULL;
- return -ENODEV;
- }
-
- pr_info("3-Stack Debug board detected, rev = 0x%04X\n",
- readw(brd_io + CPLD_CODE_VER_REG));
-
- /*
- * Configure INT line as GPIO input
- */
- gpio_request(intr_gpio, "expio_pirq");
- gpio_direction_input(intr_gpio);
-
- /* disable the interrupt and clear the status */
- imx_writew(0, brd_io + INTR_MASK_REG);
- imx_writew(0xFFFF, brd_io + INTR_RESET_REG);
- imx_writew(0, brd_io + INTR_RESET_REG);
- imx_writew(0x1F, brd_io + INTR_MASK_REG);
-
- irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
- WARN_ON(irq_base < 0);
-
- domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0,
- &irq_domain_simple_ops, NULL);
- WARN_ON(!domain);
-
- for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) {
- irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
- irq_clear_status_flags(i, IRQ_NOREQUEST);
- }
- irq_set_irq_type(p_irq, IRQF_TRIGGER_LOW);
- irq_set_chained_handler(p_irq, mxc_expio_irq_handler);
-
- /* Register Lan device on the debugboard */
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- smsc911x_resources[0].start = LAN9217_BASE_ADDR(base);
- smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1;
- smsc911x_resources[1].start = irq_find_mapping(domain, EXPIO_INT_ENET);
- smsc911x_resources[1].end = irq_find_mapping(domain, EXPIO_INT_ENET);
- platform_device_register(&smsc_lan9217_device);
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/3ds_debugboard.h b/arch/arm/mach-imx/3ds_debugboard.h
deleted file mode 100644
index a4d04d099c61..000000000000
--- a/arch/arm/mach-imx/3ds_debugboard.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-#ifndef __ASM_ARCH_MXC_3DS_DB_H__
-#define __ASM_ARCH_MXC_3DS_DB_H__
-
-extern int __init mxc_expio_init(u32 base, u32 intr_gpio);
-
-#endif /* __ASM_ARCH_MXC_3DS_DB_H__ */
diff --git a/arch/arm/mach-imx/board-mx31lilly.h b/arch/arm/mach-imx/board-mx31lilly.h
deleted file mode 100644
index 3508c598c588..000000000000
--- a/arch/arm/mach-imx/board-mx31lilly.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * Based on code for mobots boards,
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
-#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
-
-#ifndef __ASSEMBLY__
-
-enum mx31lilly_boards {
- MX31LILLY_NOBOARD = 0,
- MX31LILLY_DB = 1,
-};
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls the baseboard's init function.
- */
-
-extern void mx31lilly_db_init(void);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ */
diff --git a/arch/arm/mach-imx/board-mx31lite.h b/arch/arm/mach-imx/board-mx31lite.h
deleted file mode 100644
index 7d7c6219b25f..000000000000
--- a/arch/arm/mach-imx/board-mx31lite.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * Based on code for mobots boards,
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-
-#ifndef __ASSEMBLY__
-
-enum mx31lite_boards {
- MX31LITE_NOBOARD = 0,
- MX31LITE_DB = 1,
-};
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls the baseboard's init function.
- */
-
-extern void mx31lite_db_init(void);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
diff --git a/arch/arm/mach-imx/board-mx31moboard.h b/arch/arm/mach-imx/board-mx31moboard.h
deleted file mode 100644
index 6f3ff4d4ebc1..000000000000
--- a/arch/arm/mach-imx/board-mx31moboard.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
-#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
-
-#ifndef __ASSEMBLY__
-
-enum mx31moboard_boards {
- MX31NOBOARD = 0,
- MX31DEVBOARD = 1,
- MX31MARXBOT = 2,
- MX31SMARTBOT = 3,
- MX31EYEBOT = 4,
-};
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls the baseboard's init function.
- */
-
-extern void mx31moboard_devboard_init(void);
-extern void mx31moboard_marxbot_init(void);
-extern void mx31moboard_smartbot_init(int board);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ */
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
deleted file mode 100644
index 49783385bccf..000000000000
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ /dev/null
@@ -1,579 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/serial_8250.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-#include <linux/mfd/wm8350/audio.h>
-#include <linux/mfd/wm8350/core.h>
-#include <linux/mfd/wm8350/pmic.h>
-#endif
-
-#include "common.h"
-#include "devices-imx31.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-
-/* Base address of PBC controller */
-#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT
-
-/* PBC Board interrupt status register */
-#define PBC_INTSTATUS 0x000016
-
-/* PBC Board interrupt current status register */
-#define PBC_INTCURR_STATUS 0x000018
-
-/* PBC Interrupt mask register set address */
-#define PBC_INTMASK_SET 0x00001A
-
-/* PBC Interrupt mask register clear address */
-#define PBC_INTMASK_CLEAR 0x00001C
-
-/* External UART A */
-#define PBC_SC16C652_UARTA 0x010000
-
-/* External UART B */
-#define PBC_SC16C652_UARTB 0x010010
-
-#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
-
-#define EXPIO_INT_XUART_INTA 10
-#define EXPIO_INT_XUART_INTB 11
-
-#define MXC_MAX_EXP_IO_LINES 16
-
-/* CS8900 */
-#define EXPIO_INT_ENET_INT 8
-#define CS4_CS8900_MMIO_START 0x20000
-
-static struct irq_domain *domain;
-
-/*
- * The serial port definition structure.
- */
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
- .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
- .uartclk = 14745600,
- .regshift = 0,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
- }, {
- .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
- .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
- .uartclk = 14745600,
- .regshift = 0,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
- },
- {},
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = 0,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-static struct resource mx31ads_cs8900_resources[] __initdata = {
- DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K),
- DEFINE_RES_IRQ(-1),
-};
-
-static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = {
- .name = "cs89x0",
- .id = 0,
- .res = mx31ads_cs8900_resources,
- .num_res = ARRAY_SIZE(mx31ads_cs8900_resources),
-};
-
-static int __init mxc_init_extuart(void)
-{
- serial_platform_data[0].irq = irq_find_mapping(domain,
- EXPIO_INT_XUART_INTA);
- serial_platform_data[1].irq = irq_find_mapping(domain,
- EXPIO_INT_XUART_INTB);
- return platform_device_register(&serial_device);
-}
-
-static void __init mxc_init_ext_ethernet(void)
-{
- mx31ads_cs8900_resources[1].start =
- irq_find_mapping(domain, EXPIO_INT_ENET_INT);
- mx31ads_cs8900_resources[1].end =
- irq_find_mapping(domain, EXPIO_INT_ENET_INT);
- platform_device_register_full(
- (struct platform_device_info *)&mx31ads_cs8900_devinfo);
-}
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static unsigned int uart_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1
-};
-
-static inline void mxc_init_imx_uart(void)
-{
- mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
- imx31_add_imx_uart0(&uart_pdata);
-}
-
-static void mx31ads_expio_irq_handler(struct irq_desc *desc)
-{
- u32 imr_val;
- u32 int_valid;
- u32 expio_irq;
-
- imr_val = imx_readw(PBC_INTMASK_SET_REG);
- int_valid = imx_readw(PBC_INTSTATUS_REG) & imr_val;
-
- expio_irq = 0;
- for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
- if ((int_valid & 1) == 0)
- continue;
-
- generic_handle_irq(irq_find_mapping(domain, expio_irq));
- }
-}
-
-/*
- * Disable an expio pin's interrupt by setting the bit in the imr.
- * @param d an expio virtual irq description
- */
-static void expio_mask_irq(struct irq_data *d)
-{
- u32 expio = d->hwirq;
- /* mask the interrupt */
- imx_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
- imx_readw(PBC_INTMASK_CLEAR_REG);
-}
-
-/*
- * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
- * @param d an expio virtual irq description
- */
-static void expio_ack_irq(struct irq_data *d)
-{
- u32 expio = d->hwirq;
- /* clear the interrupt status */
- imx_writew(1 << expio, PBC_INTSTATUS_REG);
-}
-
-/*
- * Enable a expio pin's interrupt by clearing the bit in the imr.
- * @param d an expio virtual irq description
- */
-static void expio_unmask_irq(struct irq_data *d)
-{
- u32 expio = d->hwirq;
- /* unmask the interrupt */
- imx_writew(1 << expio, PBC_INTMASK_SET_REG);
-}
-
-static struct irq_chip expio_irq_chip = {
- .name = "EXPIO(CPLD)",
- .irq_ack = expio_ack_irq,
- .irq_mask = expio_mask_irq,
- .irq_unmask = expio_unmask_irq,
-};
-
-static void __init mx31ads_init_expio(void)
-{
- int irq_base;
- int i, irq;
-
- printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
-
- /*
- * Configure INT line as GPIO input
- */
- mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
-
- /* disable the interrupt and clear the status */
- imx_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
- imx_writew(0xFFFF, PBC_INTSTATUS_REG);
-
- irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
- WARN_ON(irq_base < 0);
-
- domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0,
- &irq_domain_simple_ops, NULL);
- WARN_ON(!domain);
-
- for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) {
- irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
- irq_clear_status_flags(i, IRQ_NOREQUEST);
- }
- irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_4));
- irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
- irq_set_chained_handler(irq, mx31ads_expio_irq_handler);
-}
-
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-/* This section defines setup for the Wolfson Microelectronics
- * 1133-EV1 PMU/audio board. When other PMU boards are supported the
- * regulator definitions may be shared with them, but for now they can
- * only be used with this board so would generate warnings about
- * unused statics and some of the configuration is specific to this
- * module.
- */
-
-/* CPU */
-static struct regulator_consumer_supply sw1a_consumers[] = {
- {
- .supply = "cpu_vcc",
- }
-};
-
-static struct regulator_init_data sw1a_data = {
- .constraints = {
- .name = "SW1A",
- .min_uV = 1275000,
- .max_uV = 1600000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_FAST,
- .state_mem = {
- .uV = 1400000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- .initial_state = PM_SUSPEND_MEM,
- .always_on = 1,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(sw1a_consumers),
- .consumer_supplies = sw1a_consumers,
-};
-
-/* System IO - High */
-static struct regulator_init_data viohi_data = {
- .constraints = {
- .name = "VIOHO",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .state_mem = {
- .uV = 2800000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- .initial_state = PM_SUSPEND_MEM,
- .always_on = 1,
- .boot_on = 1,
- },
-};
-
-/* System IO - Low */
-static struct regulator_init_data violo_data = {
- .constraints = {
- .name = "VIOLO",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .state_mem = {
- .uV = 1800000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- .initial_state = PM_SUSPEND_MEM,
- .always_on = 1,
- .boot_on = 1,
- },
-};
-
-/* DDR RAM */
-static struct regulator_init_data sw2a_data = {
- .constraints = {
- .name = "SW2A",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .state_mem = {
- .uV = 1800000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- .state_disk = {
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 0,
- },
- .always_on = 1,
- .boot_on = 1,
- .initial_state = PM_SUSPEND_MEM,
- },
-};
-
-static struct regulator_init_data ldo1_data = {
- .constraints = {
- .name = "VCAM/VMMC1/VMMC2",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- },
-};
-
-static struct regulator_consumer_supply ldo2_consumers[] = {
- { .supply = "AVDD", .dev_name = "1-001a" },
- { .supply = "HPVDD", .dev_name = "1-001a" },
-};
-
-/* CODEC and SIM */
-static struct regulator_init_data ldo2_data = {
- .constraints = {
- .name = "VESIM/VSIM/AVDD",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
- .consumer_supplies = ldo2_consumers,
-};
-
-/* General */
-static struct regulator_init_data vdig_data = {
- .constraints = {
- .name = "VDIG",
- .min_uV = 1500000,
- .max_uV = 1500000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .apply_uV = 1,
- .always_on = 1,
- .boot_on = 1,
- },
-};
-
-/* Tranceivers */
-static struct regulator_init_data ldo4_data = {
- .constraints = {
- .name = "VRF1/CVDD_2.775",
- .min_uV = 2500000,
- .max_uV = 2500000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .apply_uV = 1,
- .always_on = 1,
- .boot_on = 1,
- },
-};
-
-static struct wm8350_led_platform_data wm8350_led_data = {
- .name = "wm8350:white",
- .default_trigger = "heartbeat",
- .max_uA = 27899,
-};
-
-static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
- .vmid_discharge_msecs = 1000,
- .drain_msecs = 30,
- .cap_discharge_msecs = 700,
- .vmid_charge_msecs = 700,
- .vmid_s_curve = WM8350_S_CURVE_SLOW,
- .dis_out4 = WM8350_DISCHARGE_SLOW,
- .dis_out3 = WM8350_DISCHARGE_SLOW,
- .dis_out2 = WM8350_DISCHARGE_SLOW,
- .dis_out1 = WM8350_DISCHARGE_SLOW,
- .vroi_out4 = WM8350_TIE_OFF_500R,
- .vroi_out3 = WM8350_TIE_OFF_500R,
- .vroi_out2 = WM8350_TIE_OFF_500R,
- .vroi_out1 = WM8350_TIE_OFF_500R,
- .vroi_enable = 0,
- .codec_current_on = WM8350_CODEC_ISEL_1_0,
- .codec_current_standby = WM8350_CODEC_ISEL_0_5,
- .codec_current_charge = WM8350_CODEC_ISEL_1_5,
-};
-
-static int mx31_wm8350_init(struct wm8350 *wm8350)
-{
- wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
- WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
- WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_ON);
-
- wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN,
- WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH,
- WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_ON);
-
- wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN,
- WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH,
- WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN,
- WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH,
- WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT,
- WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH,
- WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT,
- WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
- WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT,
- WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
- WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
- wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
- wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
- wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data);
- wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data);
- wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data);
- wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data);
- wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data);
-
- /* LEDs */
- wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1,
- WM8350_DC5_ERRACT_SHUTDOWN_CONV);
- wm8350_isink_set_flash(wm8350, WM8350_ISINK_A,
- WM8350_ISINK_FLASH_DISABLE,
- WM8350_ISINK_FLASH_TRIG_BIT,
- WM8350_ISINK_FLASH_DUR_32MS,
- WM8350_ISINK_FLASH_ON_INSTANT,
- WM8350_ISINK_FLASH_OFF_INSTANT,
- WM8350_ISINK_FLASH_MODE_EN);
- wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5,
- WM8350_ISINK_MODE_BOOST,
- WM8350_ISINK_ILIM_NORMAL,
- WM8350_DC5_RMP_20V,
- WM8350_DC5_FBSRC_ISINKA);
- wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A,
- &wm8350_led_data);
-
- wm8350->codec.platform_data = &imx32ads_wm8350_setup;
-
- regulator_has_full_constraints();
-
- return 0;
-}
-
-static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
- .init = mx31_wm8350_init,
-};
-#endif
-
-static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
- {
- I2C_BOARD_INFO("wm8350", 0x1a),
- .platform_data = &mx31_wm8350_pdata,
- /* irq number is run-time assigned */
- },
-#endif
-};
-
-static void __init mxc_init_i2c(void)
-{
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
- mx31ads_i2c1_devices[0].irq =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
-#endif
- i2c_register_board_info(1, mx31ads_i2c1_devices,
- ARRAY_SIZE(mx31ads_i2c1_devices));
-
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
-
- imx31_add_imx_i2c1(NULL);
-}
-
-static unsigned int ssi_pins[] = {
- MX31_PIN_SFS5__SFS5,
- MX31_PIN_SCK5__SCK5,
- MX31_PIN_SRXD5__SRXD5,
- MX31_PIN_STXD5__STXD5,
-};
-
-static void __init mxc_init_audio(void)
-{
- imx31_add_imx_ssi(0, NULL);
- mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
-}
-
-/*
- * Static mappings, starting from the CS4 start address up to the start address
- * of the CS8900.
- */
-static struct map_desc mx31ads_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
- .length = CS4_CS8900_MMIO_START,
- .type = MT_DEVICE
- },
-};
-
-static void __init mx31ads_map_io(void)
-{
- mx31_map_io();
- iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
-}
-
-static void __init mx31ads_init(void)
-{
- imx31_soc_init();
-
- mxc_init_imx_uart();
- mxc_init_audio();
-}
-
-static void __init mx31ads_late(void)
-{
- mx31ads_init_expio();
- mxc_init_extuart();
- mxc_init_i2c();
- mxc_init_ext_ethernet();
-}
-
-static void __init mx31ads_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-MACHINE_START(MX31ADS, "Freescale MX31ADS")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx31ads_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = mx31ads_timer_init,
- .init_machine = mx31ads_init,
- .init_late = mx31ads_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c
deleted file mode 100644
index 13da7325c32b..000000000000
--- a/arch/arm/mach-imx/mx31lite-db.c
+++ /dev/null
@@ -1,154 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * LogicPD i.MX31 SOM-LV development board support
- *
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * based on code for other MX31 boards,
- *
- * Copyright 2005-2007 Freescale Semiconductor
- * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "board-mx31lite.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-
-/*
- * This file contains board-specific initialization routines for the
- * LogicPD i.MX31 SOM-LV development board, aka 'LiteKit'.
- * If you design an own baseboard for the module, use this file as base
- * for support code.
- */
-
-static unsigned int litekit_db_board_pins[] __initdata = {
- /* SDHC1 */
- MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_DATA1__SD1_DATA1,
- MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA3__SD1_DATA3,
- MX31_PIN_SD1_CLK__SD1_CLK,
- MX31_PIN_SD1_CMD__SD1_CMD,
-};
-
-/* MMC */
-
-static int gpio_det, gpio_wp;
-
-#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS)
-
-static int mxc_mmc1_get_ro(struct device *dev)
-{
- return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_GPIO1_6));
-}
-
-static int mxc_mmc1_init(struct device *dev,
- irq_handler_t detect_irq, void *data)
-{
- int ret;
-
- gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
- gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
-
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA0,
- MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA1,
- MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA2,
- MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA3,
- MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_SD1_CMD,
- MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
- mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
-
- ret = gpio_request(gpio_det, "MMC detect");
- if (ret)
- return ret;
-
- ret = gpio_request(gpio_wp, "MMC w/p");
- if (ret)
- goto exit_free_det;
-
- gpio_direction_input(gpio_det);
- gpio_direction_input(gpio_wp);
-
- ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)),
- detect_irq,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "MMC detect", data);
- if (ret)
- goto exit_free_wp;
-
- return 0;
-
-exit_free_wp:
- gpio_free(gpio_wp);
-
-exit_free_det:
- gpio_free(gpio_det);
-
- return ret;
-}
-
-static void mxc_mmc1_exit(struct device *dev, void *data)
-{
- gpio_free(gpio_det);
- gpio_free(gpio_wp);
- free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)), data);
-}
-
-static const struct imxmmc_platform_data mmc_pdata __initconst = {
- .get_ro = mxc_mmc1_get_ro,
- .init = mxc_mmc1_init,
- .exit = mxc_mmc1_exit,
-};
-
-/* GPIO LEDs */
-
-static const struct gpio_led litekit_leds[] __initconst = {
- {
- .name = "GPIO0",
- .gpio = IOMUX_TO_GPIO(MX31_PIN_COMPARE),
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- {
- .name = "GPIO1",
- .gpio = IOMUX_TO_GPIO(MX31_PIN_CAPTURE),
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- }
-};
-
-static const struct gpio_led_platform_data
- litekit_led_platform_data __initconst = {
- .leds = litekit_leds,
- .num_leds = ARRAY_SIZE(litekit_leds),
-};
-
-void __init mx31lite_db_init(void)
-{
- mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
- ARRAY_SIZE(litekit_db_board_pins),
- "development board pins");
- imx31_add_mxc_mmc(0, &mmc_pdata);
- gpio_led_register_device(-1, &litekit_led_platform_data);
- imx31_add_imx2_wdt();
- imx31_add_mxc_rtc();
-}
diff --git a/arch/arm/mach-imx/pcm037.h b/arch/arm/mach-imx/pcm037.h
deleted file mode 100644
index 470d3c887e14..000000000000
--- a/arch/arm/mach-imx/pcm037.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __PCM037_H__
-#define __PCM037_H__
-
-enum pcm037_board_variant {
- PCM037_PCM970,
- PCM037_EET,
-};
-
-extern enum pcm037_board_variant pcm037_variant(void);
-
-#ifdef CONFIG_MACH_PCM037_EET
-int pcm037_eet_init_devices(void);
-#else
-static inline int pcm037_eet_init_devices(void) { return 0; }
-#endif
-
-#endif
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 6/9] ARM: imx3: Remove imx3 soc_init()
2020-09-11 12:40 [PATCH 0/9] ARM: imx: Remove more board related code Fabio Estevam
` (4 preceding siblings ...)
2020-09-11 12:40 ` [PATCH 5/9] ARM: imx31: Remove remaining i.MX31 board code Fabio Estevam
@ 2020-09-11 12:40 ` Fabio Estevam
2020-09-11 12:40 ` [PATCH 7/9] ARM: imx: Remove iomux-v3 board code Fabio Estevam
` (3 subsequent siblings)
9 siblings, 0 replies; 13+ messages in thread
From: Fabio Estevam @ 2020-09-11 12:40 UTC (permalink / raw)
To: shawnguo; +Cc: linux-arm-kernel, Fabio Estevam, arnd, linux-imx, kernel
imx31_soc_init() and imx35_soc_init() were only used by i.MX31/35 board
files. Since the board files users are gone, it is safe to remove
imx3 soc_init() functions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
arch/arm/mach-imx/common.h | 2 -
arch/arm/mach-imx/mm-imx3.c | 159 ------------------------------------
2 files changed, 161 deletions(-)
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 6dd86b99cc68..dafc662959a6 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -28,8 +28,6 @@ void mx21_init_irq(void);
void mx31_init_irq(void);
void mx35_init_irq(void);
void imx21_soc_init(void);
-void imx31_soc_init(void);
-void imx35_soc_init(void);
int mx21_clocks_init(unsigned long lref, unsigned long fref);
int mx27_clocks_init(unsigned long fref);
int mx31_clocks_init(unsigned long fref);
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index ea2d58a63903..66b477586128 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -71,40 +71,6 @@ static void __iomem *imx3_ioremap_caller(phys_addr_t phys_addr, size_t size,
return __arm_ioremap_caller(phys_addr, size, mtype, caller);
}
-static void __init imx3_init_l2x0(void)
-{
-#ifdef CONFIG_CACHE_L2X0
- void __iomem *l2x0_base;
- void __iomem *clkctl_base;
-
-/*
- * First of all, we must repair broken chip settings. There are some
- * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
- * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
- * Workaraound is to setup the correct register setting prior enabling the
- * L2 cache. This should not hurt already working CPUs, as they are using the
- * same value.
- */
-#define L2_MEM_VAL 0x10
-
- clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
- if (clkctl_base != NULL) {
- writel(0x00000515, clkctl_base + L2_MEM_VAL);
- iounmap(clkctl_base);
- } else {
- pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
- }
-
- l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
- if (!l2x0_base) {
- printk(KERN_ERR "remapping L2 cache area failed\n");
- return;
- }
-
- l2x0_init(l2x0_base, 0x00030024, 0x00000000);
-#endif
-}
-
#ifdef CONFIG_SOC_IMX31
static struct map_desc mx31_io_desc[] __initdata = {
imx_map_entry(MX31, X_MEMC, MT_DEVICE),
@@ -145,61 +111,6 @@ void __init mx31_init_irq(void)
{
mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
}
-
-static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
- .per_2_per_addr = 1677,
-};
-
-static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
- .ap_2_ap_addr = 423,
- .ap_2_bp_addr = 829,
- .bp_2_ap_addr = 1029,
-};
-
-static struct sdma_platform_data imx31_sdma_pdata __initdata = {
- .fw_name = "sdma-imx31-to2.bin",
- .script_addrs = &imx31_to2_sdma_script,
-};
-
-static const struct resource imx31_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
-static const struct resource imx31_rnga_res[] __initconst = {
- DEFINE_RES_MEM(MX31_RNGA_BASE_ADDR, SZ_16K),
-};
-
-void __init imx31_soc_init(void)
-{
- int to_version = mx31_revision() >> 4;
-
- imx3_init_l2x0();
-
- mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
- mxc_device_init();
-
- mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
- mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
- mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
-
- pinctrl_provide_dummies();
-
- if (to_version == 1) {
- strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
- strlen(imx31_sdma_pdata.fw_name));
- imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
- }
-
- imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
-
- imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS1_BASE_ADDR));
- imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS2_BASE_ADDR));
-
- platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res,
- ARRAY_SIZE(imx31_audmux_res));
- platform_device_register_simple("mxc_rnga", -1, imx31_rnga_res,
- ARRAY_SIZE(imx31_rnga_res));
-}
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
@@ -239,74 +150,4 @@ void __init mx35_init_irq(void)
{
mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
}
-
-static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
- .ap_2_ap_addr = 642,
- .uart_2_mcu_addr = 817,
- .mcu_2_app_addr = 747,
- .uartsh_2_mcu_addr = 1183,
- .per_2_shp_addr = 1033,
- .mcu_2_shp_addr = 961,
- .ata_2_mcu_addr = 1333,
- .mcu_2_ata_addr = 1252,
- .app_2_mcu_addr = 683,
- .shp_2_per_addr = 1111,
- .shp_2_mcu_addr = 892,
-};
-
-static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
- .ap_2_ap_addr = 729,
- .uart_2_mcu_addr = 904,
- .per_2_app_addr = 1597,
- .mcu_2_app_addr = 834,
- .uartsh_2_mcu_addr = 1270,
- .per_2_shp_addr = 1120,
- .mcu_2_shp_addr = 1048,
- .ata_2_mcu_addr = 1429,
- .mcu_2_ata_addr = 1339,
- .app_2_per_addr = 1531,
- .app_2_mcu_addr = 770,
- .shp_2_per_addr = 1198,
- .shp_2_mcu_addr = 979,
-};
-
-static struct sdma_platform_data imx35_sdma_pdata __initdata = {
- .fw_name = "sdma-imx35-to2.bin",
- .script_addrs = &imx35_to2_sdma_script,
-};
-
-static const struct resource imx35_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX35_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
-void __init imx35_soc_init(void)
-{
- int to_version = mx35_revision() >> 4;
-
- imx3_init_l2x0();
-
- mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
- mxc_device_init();
-
- mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
- mxc_register_gpio("imx35-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
- mxc_register_gpio("imx35-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
-
- pinctrl_provide_dummies();
- if (to_version == 1) {
- strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
- strlen(imx35_sdma_pdata.fw_name));
- imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
- }
-
- imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
-
- /* Setup AIPS registers */
- imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS1_BASE_ADDR));
- imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS2_BASE_ADDR));
-
- /* i.mx35 has the i.mx31 type audmux */
- platform_device_register_simple("imx31-audmux", 0, imx35_audmux_res,
- ARRAY_SIZE(imx35_audmux_res));
-}
#endif /* ifdef CONFIG_SOC_IMX35 */
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 7/9] ARM: imx: Remove iomux-v3 board code
2020-09-11 12:40 [PATCH 0/9] ARM: imx: Remove more board related code Fabio Estevam
` (5 preceding siblings ...)
2020-09-11 12:40 ` [PATCH 6/9] ARM: imx3: Remove imx3 soc_init() Fabio Estevam
@ 2020-09-11 12:40 ` Fabio Estevam
2020-09-11 12:40 ` [PATCH 8/9] ARM: imx: Remove imx device directory Fabio Estevam
` (2 subsequent siblings)
9 siblings, 0 replies; 13+ messages in thread
From: Fabio Estevam @ 2020-09-11 12:40 UTC (permalink / raw)
To: shawnguo; +Cc: linux-arm-kernel, Fabio Estevam, arnd, linux-imx, kernel
IMX_HAVE_IOMUX_V3 was only used by i.MX25/35 board files. Since the
board files users are gone, it is safe to remove iomux-v3 related
code.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
arch/arm/mach-imx/Kconfig | 5 --
arch/arm/mach-imx/Makefile | 2 -
arch/arm/mach-imx/iomux-v3.c | 65 ------------------
arch/arm/mach-imx/iomux-v3.h | 130 -----------------------------------
arch/arm/mach-imx/mm-imx3.c | 2 -
5 files changed, 204 deletions(-)
delete mode 100644 arch/arm/mach-imx/iomux-v3.c
delete mode 100644 arch/arm/mach-imx/iomux-v3.h
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 138c5344f2f2..0ae09c9c22ae 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -47,9 +47,6 @@ config HAVE_IMX_SRC
def_bool y if SMP
select ARCH_HAS_RESET_CONTROLLER
-config ARCH_MXC_IOMUX_V3
- bool
-
if ARCH_MULTI_V6
comment "ARM1136 platforms"
@@ -63,7 +60,6 @@ config SOC_IMX31
config SOC_IMX35
bool "i.MX35 support"
- select ARCH_MXC_IOMUX_V3
select MXC_AVIC
select PINCTRL_IMX35
help
@@ -87,7 +83,6 @@ if ARCH_MULTI_V5
config SOC_IMX25
bool "i.MX25 support"
- select ARCH_MXC_IOMUX_V3
select CPU_ARM926T
select MXC_AVIC
select PINCTRL_IMX25
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index a976b120ad45..b3ebfa03c27f 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -11,8 +11,6 @@ obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o mach-imx35.o
imx5-pm-$(CONFIG_PM) += pm-imx5.o
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y)
-obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
-
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o
diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c
deleted file mode 100644
index 043cf3c7cacf..000000000000
--- a/arch/arm/mach-imx/iomux-v3.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- * <armlinux@phytec.de>
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/map.h>
-
-#include "hardware.h"
-#include "iomux-v3.h"
-
-static void __iomem *base;
-
-/*
- * configures a single pad in the iomuxer
- */
-int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
-{
- u32 mux_ctrl_ofs = (pad & MUX_CTRL_OFS_MASK) >> MUX_CTRL_OFS_SHIFT;
- u32 mux_mode = (pad & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
- u32 sel_input_ofs = (pad & MUX_SEL_INPUT_OFS_MASK) >> MUX_SEL_INPUT_OFS_SHIFT;
- u32 sel_input = (pad & MUX_SEL_INPUT_MASK) >> MUX_SEL_INPUT_SHIFT;
- u32 pad_ctrl_ofs = (pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT;
- u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
-
- if (mux_ctrl_ofs)
- imx_writel(mux_mode, base + mux_ctrl_ofs);
-
- if (sel_input_ofs)
- imx_writel(sel_input, base + sel_input_ofs);
-
- if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
- imx_writel(pad_ctrl, base + pad_ctrl_ofs);
-
- return 0;
-}
-
-int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
- unsigned count)
-{
- const iomux_v3_cfg_t *p = pad_list;
- int i;
- int ret;
-
- for (i = 0; i < count; i++) {
- ret = mxc_iomux_v3_setup_pad(*p);
- if (ret)
- return ret;
- p++;
- }
- return 0;
-}
-
-void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
-{
- base = iomux_v3_base;
-}
diff --git a/arch/arm/mach-imx/iomux-v3.h b/arch/arm/mach-imx/iomux-v3.h
deleted file mode 100644
index 7db8ec926ff1..000000000000
--- a/arch/arm/mach-imx/iomux-v3.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- * <armlinux@phytec.de>
- */
-
-#ifndef __MACH_IOMUX_V3_H__
-#define __MACH_IOMUX_V3_H__
-
-/*
- * build IOMUX_PAD structure
- *
- * This iomux scheme is based around pads, which are the physical balls
- * on the processor.
- *
- * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
- * things like driving strength and pullup/pulldown.
- * - Each pad can have but not necessarily does have an output routing register
- * (IOMUXC_SW_MUX_CTL_PAD_x).
- * - Each pad can have but not necessarily does have an input routing register
- * (IOMUXC_x_SELECT_INPUT)
- *
- * The three register sets do not have a fixed offset to each other,
- * hence we order this table by pad control registers (which all pads
- * have) and put the optional i/o routing registers into additional
- * fields.
- *
- * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named
- * GPIO_<unit>_<num>
- *
- * IOMUX/PAD Bit field definitions
- *
- * MUX_CTRL_OFS: 0..11 (12)
- * PAD_CTRL_OFS: 12..23 (12)
- * SEL_INPUT_OFS: 24..35 (12)
- * MUX_MODE + SION: 36..40 (5)
- * PAD_CTRL + NO_PAD_CTRL: 41..57 (17)
- * SEL_INP: 58..61 (4)
- * reserved: 63 (1)
-*/
-
-typedef u64 iomux_v3_cfg_t;
-
-#define MUX_CTRL_OFS_SHIFT 0
-#define MUX_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT)
-#define MUX_PAD_CTRL_OFS_SHIFT 12
-#define MUX_PAD_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_PAD_CTRL_OFS_SHIFT)
-#define MUX_SEL_INPUT_OFS_SHIFT 24
-#define MUX_SEL_INPUT_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_SEL_INPUT_OFS_SHIFT)
-
-#define MUX_MODE_SHIFT 36
-#define MUX_MODE_MASK ((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT)
-#define MUX_PAD_CTRL_SHIFT 41
-#define MUX_PAD_CTRL_MASK ((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT)
-#define MUX_SEL_INPUT_SHIFT 58
-#define MUX_SEL_INPUT_MASK ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
-
-#define MUX_PAD_CTRL(x) ((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT)
-
-#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _sel_input_ofs, \
- _sel_input, _pad_ctrl) \
- (((iomux_v3_cfg_t)(_mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT) | \
- ((iomux_v3_cfg_t)(_mux_mode) << MUX_MODE_SHIFT) | \
- ((iomux_v3_cfg_t)(_pad_ctrl_ofs) << MUX_PAD_CTRL_OFS_SHIFT) | \
- ((iomux_v3_cfg_t)(_pad_ctrl) << MUX_PAD_CTRL_SHIFT) | \
- ((iomux_v3_cfg_t)(_sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT) | \
- ((iomux_v3_cfg_t)(_sel_input) << MUX_SEL_INPUT_SHIFT))
-
-#define NEW_PAD_CTRL(cfg, pad) (((cfg) & ~MUX_PAD_CTRL_MASK) | MUX_PAD_CTRL(pad))
-/*
- * Use to set PAD control
- */
-
-#define NO_PAD_CTRL (1 << 16)
-#define PAD_CTL_DVS (1 << 13)
-#define PAD_CTL_HYS (1 << 8)
-
-#define PAD_CTL_PKE (1 << 7)
-#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE)
-#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE)
-#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE)
-#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE)
-#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE)
-
-#define PAD_CTL_ODE (1 << 3)
-
-#define PAD_CTL_DSE_LOW (0 << 1)
-#define PAD_CTL_DSE_MED (1 << 1)
-#define PAD_CTL_DSE_HIGH (2 << 1)
-#define PAD_CTL_DSE_MAX (3 << 1)
-
-#define PAD_CTL_SRE_FAST (1 << 0)
-#define PAD_CTL_SRE_SLOW (0 << 0)
-
-#define IOMUX_CONFIG_SION (0x1 << 4)
-
-#define MX51_NUM_GPIO_PORT 4
-
-#define GPIO_PIN_MASK 0x1f
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
-
-#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
-#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
-#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
-#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
-#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
-#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
-
-/*
- * setups a single pad in the iomuxer
- */
-int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
-
-/*
- * setups multiple pads
- * convenient way to call the above function with tables
- */
-int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
- unsigned count);
-
-/*
- * Initialise the iomux controller
- */
-void mxc_iomux_v3_init(void __iomem *iomux_v3_base);
-
-#endif /* __MACH_IOMUX_V3_H__*/
-
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 66b477586128..35883fa70479 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -21,7 +21,6 @@
#include "crmregs-imx3.h"
#include "devices/devices-common.h"
#include "hardware.h"
-#include "iomux-v3.h"
void __iomem *mx3_ccm_base;
@@ -140,7 +139,6 @@ static void imx35_idle(void)
void __init imx35_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX35);
- mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
arm_pm_idle = imx35_idle;
arch_ioremap_caller = imx3_ioremap_caller;
mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 8/9] ARM: imx: Remove imx device directory
2020-09-11 12:40 [PATCH 0/9] ARM: imx: Remove more board related code Fabio Estevam
` (6 preceding siblings ...)
2020-09-11 12:40 ` [PATCH 7/9] ARM: imx: Remove iomux-v3 board code Fabio Estevam
@ 2020-09-11 12:40 ` Fabio Estevam
2020-09-11 14:30 ` [PATCH 0/9] ARM: imx: Remove more board related code Arnd Bergmann
2020-09-13 3:16 ` Shawn Guo
9 siblings, 0 replies; 13+ messages in thread
From: Fabio Estevam @ 2020-09-11 12:40 UTC (permalink / raw)
To: shawnguo; +Cc: linux-arm-kernel, Fabio Estevam, arnd, linux-imx, kernel
arch/arm/mach-imx/devices/ contains utilities for registering devices
in board file. Now that board files are gone, get rid of the devices
directory.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
arch/arm/mach-imx/Kconfig | 2 -
arch/arm/mach-imx/Makefile | 2 -
arch/arm/mach-imx/devices/Kconfig | 71 -----
arch/arm/mach-imx/devices/Makefile | 28 --
arch/arm/mach-imx/devices/devices-common.h | 293 ------------------
arch/arm/mach-imx/devices/devices.c | 35 ---
arch/arm/mach-imx/devices/platform-fec.c | 49 ---
arch/arm/mach-imx/devices/platform-flexcan.c | 45 ---
.../mach-imx/devices/platform-fsl-usb2-udc.c | 51 ---
arch/arm/mach-imx/devices/platform-gpio-mxc.c | 31 --
.../arm/mach-imx/devices/platform-gpio_keys.c | 15 -
arch/arm/mach-imx/devices/platform-imx-dma.c | 44 ---
arch/arm/mach-imx/devices/platform-imx-fb.c | 47 ---
arch/arm/mach-imx/devices/platform-imx-i2c.c | 74 -----
.../mach-imx/devices/platform-imx-keypad.c | 54 ----
arch/arm/mach-imx/devices/platform-imx-ssi.c | 86 -----
arch/arm/mach-imx/devices/platform-imx-uart.c | 92 ------
arch/arm/mach-imx/devices/platform-imx2-wdt.c | 52 ----
.../arm/mach-imx/devices/platform-imx21-hcd.c | 38 ---
.../mach-imx/devices/platform-imx27-coda.c | 34 --
arch/arm/mach-imx/devices/platform-ipu-core.c | 127 --------
.../mach-imx/devices/platform-mx2-camera.c | 59 ----
arch/arm/mach-imx/devices/platform-mx2-emma.c | 37 ---
arch/arm/mach-imx/devices/platform-mxc-ehci.c | 61 ----
arch/arm/mach-imx/devices/platform-mxc-mmc.c | 72 -----
arch/arm/mach-imx/devices/platform-mxc_nand.c | 72 -----
arch/arm/mach-imx/devices/platform-mxc_rtc.c | 43 ---
arch/arm/mach-imx/devices/platform-mxc_w1.c | 47 ---
arch/arm/mach-imx/devices/platform-pata_imx.c | 45 ---
.../devices/platform-sdhci-esdhc-imx.c | 64 ----
arch/arm/mach-imx/devices/platform-spi_imx.c | 78 -----
arch/arm/mach-imx/mach-imx27.c | 1 -
arch/arm/mach-imx/mm-imx3.c | 1 -
33 files changed, 1850 deletions(-)
delete mode 100644 arch/arm/mach-imx/devices/Kconfig
delete mode 100644 arch/arm/mach-imx/devices/Makefile
delete mode 100644 arch/arm/mach-imx/devices/devices-common.h
delete mode 100644 arch/arm/mach-imx/devices/devices.c
delete mode 100644 arch/arm/mach-imx/devices/platform-fec.c
delete mode 100644 arch/arm/mach-imx/devices/platform-flexcan.c
delete mode 100644 arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
delete mode 100644 arch/arm/mach-imx/devices/platform-gpio-mxc.c
delete mode 100644 arch/arm/mach-imx/devices/platform-gpio_keys.c
delete mode 100644 arch/arm/mach-imx/devices/platform-imx-dma.c
delete mode 100644 arch/arm/mach-imx/devices/platform-imx-fb.c
delete mode 100644 arch/arm/mach-imx/devices/platform-imx-i2c.c
delete mode 100644 arch/arm/mach-imx/devices/platform-imx-keypad.c
delete mode 100644 arch/arm/mach-imx/devices/platform-imx-ssi.c
delete mode 100644 arch/arm/mach-imx/devices/platform-imx-uart.c
delete mode 100644 arch/arm/mach-imx/devices/platform-imx2-wdt.c
delete mode 100644 arch/arm/mach-imx/devices/platform-imx21-hcd.c
delete mode 100644 arch/arm/mach-imx/devices/platform-imx27-coda.c
delete mode 100644 arch/arm/mach-imx/devices/platform-ipu-core.c
delete mode 100644 arch/arm/mach-imx/devices/platform-mx2-camera.c
delete mode 100644 arch/arm/mach-imx/devices/platform-mx2-emma.c
delete mode 100644 arch/arm/mach-imx/devices/platform-mxc-ehci.c
delete mode 100644 arch/arm/mach-imx/devices/platform-mxc-mmc.c
delete mode 100644 arch/arm/mach-imx/devices/platform-mxc_nand.c
delete mode 100644 arch/arm/mach-imx/devices/platform-mxc_rtc.c
delete mode 100644 arch/arm/mach-imx/devices/platform-mxc_w1.c
delete mode 100644 arch/arm/mach-imx/devices/platform-pata_imx.c
delete mode 100644 arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
delete mode 100644 arch/arm/mach-imx/devices/platform-spi_imx.c
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0ae09c9c22ae..52902782cc5f 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -270,6 +270,4 @@ endchoice
endif
-source "arch/arm/mach-imx/devices/Kconfig"
-
endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index b3ebfa03c27f..f3e7717cdbea 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -68,5 +68,3 @@ obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
obj-$(CONFIG_SOC_VF610) += mach-vf610.o
obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o
-
-obj-y += devices/
diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig
deleted file mode 100644
index fdca73d117e6..000000000000
--- a/arch/arm/mach-imx/devices/Kconfig
+++ /dev/null
@@ -1,71 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config IMX_HAVE_PLATFORM_FEC
- bool
- default y if SOC_IMX25 || SOC_IMX27 || SOC_IMX35
-
-config IMX_HAVE_PLATFORM_FLEXCAN
- bool
-
-config IMX_HAVE_PLATFORM_FSL_USB2_UDC
- bool
-
-config IMX_HAVE_PLATFORM_GPIO_KEYS
- bool
-
-config IMX_HAVE_PLATFORM_IMX21_HCD
- bool
-
-config IMX_HAVE_PLATFORM_IMX27_CODA
- bool
- default y if SOC_IMX27
-
-config IMX_HAVE_PLATFORM_IMX2_WDT
- bool
-
-config IMX_HAVE_PLATFORM_IMX_FB
- bool
-
-config IMX_HAVE_PLATFORM_IMX_I2C
- bool
-
-config IMX_HAVE_PLATFORM_IMX_KEYPAD
- bool
-
-config IMX_HAVE_PLATFORM_PATA_IMX
- bool
-
-config IMX_HAVE_PLATFORM_IMX_SSI
- bool
-
-config IMX_HAVE_PLATFORM_IMX_UART
- bool
-
-config IMX_HAVE_PLATFORM_IPU_CORE
- bool
-
-config IMX_HAVE_PLATFORM_MX2_CAMERA
- bool
-
-config IMX_HAVE_PLATFORM_MX2_EMMA
- bool
-
-config IMX_HAVE_PLATFORM_MXC_EHCI
- bool
-
-config IMX_HAVE_PLATFORM_MXC_MMC
- bool
-
-config IMX_HAVE_PLATFORM_MXC_NAND
- bool
-
-config IMX_HAVE_PLATFORM_MXC_RTC
- bool
-
-config IMX_HAVE_PLATFORM_MXC_W1
- bool
-
-config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- bool
-
-config IMX_HAVE_PLATFORM_SPI_IMX
- bool
diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile
deleted file mode 100644
index e44758aaa11c..000000000000
--- a/arch/arm/mach-imx/devices/Makefile
+++ /dev/null
@@ -1,28 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := devices.o
-
-obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
-obj-y += platform-gpio-mxc.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX27_CODA) += platform-imx27-coda.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
-obj-y += platform-imx-dma.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_PATA_IMX) += platform-pata_imx.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
deleted file mode 100644
index 327a1de7dce1..000000000000
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ /dev/null
@@ -1,293 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_data/dma-imx-sdma.h>
-
-extern struct device mxc_aips_bus;
-extern struct device mxc_ahb_bus;
-
-static inline struct platform_device *imx_add_platform_device_dmamask(
- const char *name, int id,
- const struct resource *res, unsigned int num_resources,
- const void *data, size_t size_data, u64 dmamask)
-{
- struct platform_device_info pdevinfo = {
- .name = name,
- .id = id,
- .res = res,
- .num_res = num_resources,
- .data = data,
- .size_data = size_data,
- .dma_mask = dmamask,
- };
- return platform_device_register_full(&pdevinfo);
-}
-
-static inline struct platform_device *imx_add_platform_device(
- const char *name, int id,
- const struct resource *res, unsigned int num_resources,
- const void *data, size_t size_data)
-{
- return imx_add_platform_device_dmamask(
- name, id, res, num_resources, data, size_data, 0);
-}
-
-#include <linux/fec.h>
-struct imx_fec_data {
- const char *devid;
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_fec(
- const struct imx_fec_data *data,
- const struct fec_platform_data *pdata);
-
-struct imx_flexcan_data {
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_flexcan(
- const struct imx_flexcan_data *data);
-
-#include <linux/fsl_devices.h>
-struct imx_fsl_usb2_udc_data {
- const char *devid;
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_fsl_usb2_udc(
- const struct imx_fsl_usb2_udc_data *data,
- const struct fsl_usb2_platform_data *pdata);
-
-#include <linux/gpio_keys.h>
-struct platform_device *__init imx_add_gpio_keys(
- const struct gpio_keys_platform_data *pdata);
-
-#include <linux/platform_data/usb-mx2.h>
-struct imx_imx21_hcd_data {
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx21_hcd(
- const struct imx_imx21_hcd_data *data,
- const struct mx21_usbh_platform_data *pdata);
-
-struct imx_imx27_coda_data {
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx27_coda(
- const struct imx_imx27_coda_data *data);
-
-struct imx_imx2_wdt_data {
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
-};
-struct platform_device *__init imx_add_imx2_wdt(
- const struct imx_imx2_wdt_data *data);
-
-struct imx_imxdi_rtc_data {
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imxdi_rtc(
- const struct imx_imxdi_rtc_data *data);
-
-#include <linux/platform_data/video-imxfb.h>
-struct imx_imx_fb_data {
- const char *devid;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx_fb(
- const struct imx_imx_fb_data *data,
- const struct imx_fb_platform_data *pdata);
-
-#include <linux/platform_data/i2c-imx.h>
-struct imx_imx_i2c_data {
- const char *devid;
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx_i2c(
- const struct imx_imx_i2c_data *data,
- const struct imxi2c_platform_data *pdata);
-
-#include <linux/input/matrix_keypad.h>
-struct imx_imx_keypad_data {
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx_keypad(
- const struct imx_imx_keypad_data *data,
- const struct matrix_keymap_data *pdata);
-
-#include <linux/platform_data/asoc-imx-ssi.h>
-struct imx_imx_ssi_data {
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
- resource_size_t dmatx0;
- resource_size_t dmarx0;
- resource_size_t dmatx1;
- resource_size_t dmarx1;
-};
-struct platform_device *__init imx_add_imx_ssi(
- const struct imx_imx_ssi_data *data,
- const struct imx_ssi_platform_data *pdata);
-
-#include <linux/platform_data/serial-imx.h>
-struct imx_imx_uart_1irq_data {
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx_uart_1irq(
- const struct imx_imx_uart_1irq_data *data,
- const struct imxuart_platform_data *pdata);
-
-#include <linux/platform_data/video-mx3fb.h>
-#include <linux/platform_data/media/camera-mx3.h>
-struct imx_ipu_core_data {
- resource_size_t iobase;
- resource_size_t synirq;
- resource_size_t errirq;
-};
-struct platform_device *__init imx_add_ipu_core(
- const struct imx_ipu_core_data *data);
-struct platform_device *__init imx_alloc_mx3_camera(
- const struct imx_ipu_core_data *data,
- const struct mx3_camera_pdata *pdata);
-struct platform_device *__init imx_add_mx3_sdc_fb(
- const struct imx_ipu_core_data *data,
- struct mx3fb_platform_data *pdata);
-
-#include <linux/platform_data/media/camera-mx2.h>
-struct imx_mx2_camera_data {
- const char *devid;
- resource_size_t iobasecsi;
- resource_size_t iosizecsi;
- resource_size_t irqcsi;
- resource_size_t iobaseemmaprp;
- resource_size_t iosizeemmaprp;
- resource_size_t irqemmaprp;
-};
-struct platform_device *__init imx_add_mx2_camera(
- const struct imx_mx2_camera_data *data,
- const struct mx2_camera_platform_data *pdata);
-
-
-struct imx_mx2_emma_data {
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_mx2_emmaprp(
- const struct imx_mx2_emma_data *data);
-
-#include <linux/platform_data/usb-ehci-mxc.h>
-struct imx_mxc_ehci_data {
- int id;
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_mxc_ehci(
- const struct imx_mxc_ehci_data *data,
- const struct mxc_usbh_platform_data *pdata);
-
-#include <linux/platform_data/mmc-mxcmmc.h>
-struct imx_mxc_mmc_data {
- const char *devid;
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
- resource_size_t dmareq;
-};
-struct platform_device *__init imx_add_mxc_mmc(
- const struct imx_mxc_mmc_data *data,
- const struct imxmmc_platform_data *pdata);
-
-#include <linux/platform_data/mtd-mxc_nand.h>
-struct imx_mxc_nand_data {
- const char *devid;
- /*
- * id is traditionally 0, but -1 is more appropriate. We use -1 for new
- * machines but don't change existing devices as the nand device usually
- * appears in the kernel command line to pass its partitioning.
- */
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t axibase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_mxc_nand(
- const struct imx_mxc_nand_data *data,
- const struct mxc_nand_platform_data *pdata);
-
-struct imx_pata_imx_data {
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_pata_imx(
- const struct imx_pata_imx_data *data);
-
-/* mxc_rtc */
-struct imx_mxc_rtc_data {
- const char *devid;
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_mxc_rtc(
- const struct imx_mxc_rtc_data *data);
-
-/* mxc_w1 */
-struct imx_mxc_w1_data {
- resource_size_t iobase;
-};
-struct platform_device *__init imx_add_mxc_w1(
- const struct imx_mxc_w1_data *data);
-
-#include <linux/platform_data/mmc-esdhc-imx.h>
-struct imx_sdhci_esdhc_imx_data {
- const char *devid;
- int id;
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_sdhci_esdhc_imx(
- const struct imx_sdhci_esdhc_imx_data *data,
- const struct esdhc_platform_data *pdata);
-
-struct imx_spi_imx_data {
- const char *devid;
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- int irq;
-};
-struct platform_device *__init imx_add_spi_imx(
- const struct imx_spi_imx_data *data, struct gpiod_lookup_table *gtable);
-
-struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase,
- int irq);
-struct platform_device *imx_add_imx_sdma(char *name,
- resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
diff --git a/arch/arm/mach-imx/devices/devices.c b/arch/arm/mach-imx/devices/devices.c
deleted file mode 100644
index cd72f0894196..000000000000
--- a/arch/arm/mach-imx/devices/devices.c
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-
-#include "../common.h"
-#include "devices-common.h"
-
-struct device mxc_aips_bus = {
- .init_name = "mxc_aips",
-};
-
-struct device mxc_ahb_bus = {
- .init_name = "mxc_ahb",
-};
-
-int __init mxc_device_init(void)
-{
- int ret;
-
- ret = device_register(&mxc_aips_bus);
- if (ret < 0)
- goto done;
-
- ret = device_register(&mxc_ahb_bus);
-
-done:
- return ret;
-}
diff --git a/arch/arm/mach-imx/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c
deleted file mode 100644
index 88e853d7fb01..000000000000
--- a/arch/arm/mach-imx/devices/platform-fec.c
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/dma-mapping.h>
-#include <linux/sizes.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_fec_data_entry_single(soc, _devid) \
- { \
- .devid = _devid, \
- .iobase = soc ## _FEC_BASE_ADDR, \
- .irq = soc ## _INT_FEC, \
- }
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_fec_data imx27_fec_data __initconst =
- imx_fec_data_entry_single(MX27, "imx27-fec");
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX35
-/* i.mx35 has the i.mx27 type fec */
-const struct imx_fec_data imx35_fec_data __initconst =
- imx_fec_data_entry_single(MX35, "imx27-fec");
-#endif
-
-struct platform_device *__init imx_add_fec(
- const struct imx_fec_data *data,
- const struct fec_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device_dmamask(data->devid, 0,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-flexcan.c b/arch/arm/mach-imx/devices/platform-flexcan.c
deleted file mode 100644
index e4eed35c1fe2..000000000000
--- a/arch/arm/mach-imx/devices/platform-flexcan.c
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_flexcan_data_entry_single(soc, _id, _hwid, _size) \
- { \
- .id = _id, \
- .iobase = soc ## _CAN ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_CAN ## _hwid, \
- }
-
-#define imx_flexcan_data_entry(soc, _id, _hwid, _size) \
- [_id] = imx_flexcan_data_entry_single(soc, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_flexcan_data imx35_flexcan_data[] __initconst = {
-#define imx35_flexcan_data_entry(_id, _hwid) \
- imx_flexcan_data_entry(MX35, _id, _hwid, SZ_16K)
- imx35_flexcan_data_entry(0, 1),
- imx35_flexcan_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_flexcan(
- const struct imx_flexcan_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device("flexcan", data->id,
- res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
deleted file mode 100644
index cc86de4d7acb..000000000000
--- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
+++ /dev/null
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/dma-mapping.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_fsl_usb2_udc_data_entry_single(soc, _devid) \
- { \
- .devid = _devid, \
- .iobase = soc ## _USB_OTG_BASE_ADDR, \
- .irq = soc ## _INT_USB_OTG, \
- }
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27");
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_fsl_usb2_udc(
- const struct imx_fsl_usb2_udc_data *data,
- const struct fsl_usb2_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask(data->devid, -1,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-gpio-mxc.c b/arch/arm/mach-imx/devices/platform-gpio-mxc.c
deleted file mode 100644
index 355de845224c..000000000000
--- a/arch/arm/mach-imx/devices/platform-gpio-mxc.c
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Linaro Limited
- */
-#include "devices-common.h"
-#include "../common.h"
-
-struct platform_device *__init mxc_register_gpio(char *name, int id,
- resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
-{
- struct resource res[] = {
- {
- .start = iobase,
- .end = iobase + iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = irq,
- .end = irq,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = irq_high,
- .end = irq_high,
- .flags = IORESOURCE_IRQ,
- },
- };
- unsigned int nres;
-
- nres = irq_high ? ARRAY_SIZE(res) : ARRAY_SIZE(res) - 1;
- return platform_device_register_resndata(&mxc_aips_bus, name, id, res, nres, NULL, 0);
-}
diff --git a/arch/arm/mach-imx/devices/platform-gpio_keys.c b/arch/arm/mach-imx/devices/platform-gpio_keys.c
deleted file mode 100644
index 488678403ac8..000000000000
--- a/arch/arm/mach-imx/devices/platform-gpio_keys.c
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-#include <linux/sizes.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-struct platform_device *__init imx_add_gpio_keys(
- const struct gpio_keys_platform_data *pdata)
-{
- return imx_add_platform_device("gpio-keys", -1, NULL,
- 0, pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx-dma.c b/arch/arm/mach-imx/devices/platform-imx-dma.c
deleted file mode 100644
index 12656f24ad0d..000000000000
--- a/arch/arm/mach-imx/devices/platform-imx-dma.c
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "devices-common.h"
-
-struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name,
- resource_size_t iobase, int irq)
-{
- struct resource res[] = {
- {
- .start = iobase,
- .end = iobase + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = irq,
- .end = irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return platform_device_register_resndata(&mxc_ahb_bus,
- name, -1, res, ARRAY_SIZE(res), NULL, 0);
-}
-
-struct platform_device __init __maybe_unused *imx_add_imx_sdma(char *name,
- resource_size_t iobase, int irq, struct sdma_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = iobase,
- .end = iobase + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = irq,
- .end = irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return platform_device_register_resndata(&mxc_ahb_bus, name,
- -1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c
deleted file mode 100644
index e553d014506a..000000000000
--- a/arch/arm/mach-imx/devices/platform-imx-fb.c
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/dma-mapping.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx_fb_data_entry_single(soc, _devid, _size) \
- { \
- .devid = _devid, \
- .iobase = soc ## _LCDC_BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_LCDC, \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
- imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_fb_data imx27_imx_fb_data __initconst =
- imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-struct platform_device *__init imx_add_imx_fb(
- const struct imx_imx_fb_data *data,
- const struct imx_fb_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask(data->devid, 0,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c
deleted file mode 100644
index 81d317bfadd8..000000000000
--- a/arch/arm/mach-imx/devices/platform-imx-i2c.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size) \
- { \
- .devid = _devid, \
- .id = _id, \
- .iobase = soc ## _I2C ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_I2C ## _hwid, \
- }
-
-#define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size) \
- [_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
- imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
-#define imx27_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX27, "imx21-i2c", _id, _hwid, SZ_4K)
- imx27_imx_i2c_data_entry(0, 1),
- imx27_imx_i2c_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = {
-#define imx31_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX31, "imx21-i2c", _id, _hwid, SZ_4K)
- imx31_imx_i2c_data_entry(0, 1),
- imx31_imx_i2c_data_entry(1, 2),
- imx31_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
-#define imx35_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX35, "imx21-i2c", _id, _hwid, SZ_4K)
- imx35_imx_i2c_data_entry(0, 1),
- imx35_imx_i2c_data_entry(1, 2),
- imx35_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_imx_i2c(
- const struct imx_imx_i2c_data *data,
- const struct imxi2c_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device(data->devid, data->id,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx-keypad.c b/arch/arm/mach-imx/devices/platform-imx-keypad.c
deleted file mode 100644
index de2e03ec2d89..000000000000
--- a/arch/arm/mach-imx/devices/platform-imx-keypad.c
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx_keypad_data_entry_single(soc, _size) \
- { \
- .iobase = soc ## _KPP_BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_KPP, \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX21, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX27, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX31, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX35, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_imx_keypad(
- const struct imx_imx_keypad_data *data,
- const struct matrix_keymap_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device("imx-keypad", -1,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx-ssi.c b/arch/arm/mach-imx/devices/platform-imx-ssi.c
deleted file mode 100644
index ed8c66438af0..000000000000
--- a/arch/arm/mach-imx/devices/platform-imx-ssi.c
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx_ssi_data_entry(soc, _id, _hwid, _size) \
- [_id] = { \
- .id = _id, \
- .iobase = soc ## _SSI ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_SSI ## _hwid, \
- .dmatx0 = soc ## _DMA_REQ_SSI ## _hwid ## _TX0, \
- .dmarx0 = soc ## _DMA_REQ_SSI ## _hwid ## _RX0, \
- .dmatx1 = soc ## _DMA_REQ_SSI ## _hwid ## _TX1, \
- .dmarx1 = soc ## _DMA_REQ_SSI ## _hwid ## _RX1, \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = {
-#define imx21_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX21, _id, _hwid, SZ_4K)
- imx21_imx_ssi_data_entry(0, 1),
- imx21_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = {
-#define imx27_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX27, _id, _hwid, SZ_4K)
- imx27_imx_ssi_data_entry(0, 1),
- imx27_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst = {
-#define imx31_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX31, _id, _hwid, SZ_4K)
- imx31_imx_ssi_data_entry(0, 1),
- imx31_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = {
-#define imx35_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX35, _id, _hwid, SZ_4K)
- imx35_imx_ssi_data_entry(0, 1),
- imx35_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_imx_ssi(
- const struct imx_imx_ssi_data *data,
- const struct imx_ssi_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
-#define DMARES(_name) { \
- .name = #_name, \
- .start = data->dma ## _name, \
- .end = data->dma ## _name, \
- .flags = IORESOURCE_DMA, \
-}
- DMARES(tx0),
- DMARES(rx0),
- DMARES(tx1),
- DMARES(rx1),
- };
-
- return imx_add_platform_device("imx-ssi", data->id,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c
deleted file mode 100644
index c8f01deedd80..000000000000
--- a/arch/arm/mach-imx/devices/platform-imx-uart.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size) \
- [_id] = { \
- .id = _id, \
- .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irqrx = soc ## _INT_UART ## _hwid ## RX, \
- .irqtx = soc ## _INT_UART ## _hwid ## TX, \
- .irqrts = soc ## _INT_UART ## _hwid ## RTS, \
- }
-
-#define imx_imx_uart_1irq_data_entry(soc, _id, _hwid, _size) \
- [_id] = { \
- .id = _id, \
- .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_UART ## _hwid, \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = {
-#define imx21_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX21, _id, _hwid, SZ_4K)
- imx21_imx_uart_data_entry(0, 1),
- imx21_imx_uart_data_entry(1, 2),
- imx21_imx_uart_data_entry(2, 3),
- imx21_imx_uart_data_entry(3, 4),
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = {
-#define imx27_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX27, _id, _hwid, SZ_4K)
- imx27_imx_uart_data_entry(0, 1),
- imx27_imx_uart_data_entry(1, 2),
- imx27_imx_uart_data_entry(2, 3),
- imx27_imx_uart_data_entry(3, 4),
- imx27_imx_uart_data_entry(4, 5),
- imx27_imx_uart_data_entry(5, 6),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = {
-#define imx31_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_4K)
- imx31_imx_uart_data_entry(0, 1),
- imx31_imx_uart_data_entry(1, 2),
- imx31_imx_uart_data_entry(2, 3),
- imx31_imx_uart_data_entry(3, 4),
- imx31_imx_uart_data_entry(4, 5),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
-#define imx35_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX35, _id, _hwid, SZ_16K)
- imx35_imx_uart_data_entry(0, 1),
- imx35_imx_uart_data_entry(1, 2),
- imx35_imx_uart_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_imx_uart_1irq(
- const struct imx_imx_uart_1irq_data *data,
- const struct imxuart_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- /* i.mx21 type uart runs on all i.mx except i.mx1 */
- return imx_add_platform_device("imx21-uart", data->id,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx2-wdt.c b/arch/arm/mach-imx/devices/platform-imx2-wdt.c
deleted file mode 100644
index fdd355ae4d5f..000000000000
--- a/arch/arm/mach-imx/devices/platform-imx2-wdt.c
+++ /dev/null
@@ -1,52 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/sizes.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size) \
- { \
- .id = _id, \
- .iobase = soc ## _WDOG ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- }
-#define imx_imx2_wdt_data_entry(soc, _id, _hwid, _size) \
- [_id] = imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst =
- imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst =
- imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst =
- imx_imx2_wdt_data_entry_single(MX31, 0, , SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst =
- imx_imx2_wdt_data_entry_single(MX35, 0, , SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_imx2_wdt(
- const struct imx_imx2_wdt_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- },
- };
- return imx_add_platform_device("imx2-wdt", data->id,
- res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx21-hcd.c b/arch/arm/mach-imx/devices/platform-imx21-hcd.c
deleted file mode 100644
index f55763c36d26..000000000000
--- a/arch/arm/mach-imx/devices/platform-imx21-hcd.c
+++ /dev/null
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx21_hcd_data_entry_single(soc) \
- { \
- .iobase = soc ## _USBOTG_BASE_ADDR, \
- .irq = soc ## _INT_USBHOST, \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst =
- imx_imx21_hcd_data_entry_single(MX21);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-struct platform_device *__init imx_add_imx21_hcd(
- const struct imx_imx21_hcd_data *data,
- const struct mx21_usbh_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask("imx21-hcd", 0,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-imx27-coda.c b/arch/arm/mach-imx/devices/platform-imx27-coda.c
deleted file mode 100644
index 66a116e6c6bc..000000000000
--- a/arch/arm/mach-imx/devices/platform-imx27-coda.c
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Vista Silicon
- * Javier Martin <javier.martin@vista-silicon.com>
- */
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx27_coda_data imx27_coda_data __initconst = {
- .iobase = MX27_VPU_BASE_ADDR,
- .iosize = SZ_512,
- .irq = MX27_INT_VPU,
-};
-#endif
-
-struct platform_device *__init imx_add_imx27_coda(
- const struct imx_imx27_coda_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask("coda-imx27", 0, res, 2, NULL,
- 0, DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-ipu-core.c b/arch/arm/mach-imx/devices/platform-ipu-core.c
deleted file mode 100644
index b4290760f49f..000000000000
--- a/arch/arm/mach-imx/devices/platform-ipu-core.c
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/dma-mapping.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_ipu_core_entry_single(soc) \
-{ \
- .iobase = soc ## _IPU_CTRL_BASE_ADDR, \
- .synirq = soc ## _INT_IPU_SYN, \
- .errirq = soc ## _INT_IPU_ERR, \
-}
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_ipu_core_data imx31_ipu_core_data __initconst =
- imx_ipu_core_entry_single(MX31);
-#endif
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_ipu_core_data imx35_ipu_core_data __initconst =
- imx_ipu_core_entry_single(MX35);
-#endif
-
-static struct platform_device *imx_ipu_coredev __initdata;
-
-struct platform_device *__init imx_add_ipu_core(
- const struct imx_ipu_core_data *data)
-{
- /* The resource order is important! */
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + 0x5f,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->iobase + 0x88,
- .end = data->iobase + 0xb3,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->synirq,
- .end = data->synirq,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->errirq,
- .end = data->errirq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_ipu_coredev = imx_add_platform_device("ipu-core", -1,
- res, ARRAY_SIZE(res), NULL, 0);
-}
-
-struct platform_device *__init imx_alloc_mx3_camera(
- const struct imx_ipu_core_data *data,
- const struct mx3_camera_pdata *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase + 0x60,
- .end = data->iobase + 0x87,
- .flags = IORESOURCE_MEM,
- },
- };
- int ret = -ENOMEM;
- struct platform_device *pdev;
-
- if (IS_ERR_OR_NULL(imx_ipu_coredev))
- return ERR_PTR(-ENODEV);
-
- pdev = platform_device_alloc("mx3-camera", 0);
- if (!pdev)
- return ERR_PTR(-ENOMEM);
-
- pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
- if (!pdev->dev.dma_mask)
- goto err;
-
- *pdev->dev.dma_mask = DMA_BIT_MASK(32);
- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-
- ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
- if (ret)
- goto err;
-
- if (pdata) {
- struct mx3_camera_pdata *copied_pdata;
-
- ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
- if (ret) {
-err:
- kfree(pdev->dev.dma_mask);
- platform_device_put(pdev);
- return ERR_PTR(-ENODEV);
- }
- copied_pdata = dev_get_platdata(&pdev->dev);
- copied_pdata->dma_dev = &imx_ipu_coredev->dev;
- }
-
- return pdev;
-}
-
-struct platform_device *__init imx_add_mx3_sdc_fb(
- const struct imx_ipu_core_data *data,
- struct mx3fb_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase + 0xb4,
- .end = data->iobase + 0x1bf,
- .flags = IORESOURCE_MEM,
- },
- };
-
- if (IS_ERR_OR_NULL(imx_ipu_coredev))
- return ERR_PTR(-ENODEV);
-
- pdata->dma_dev = &imx_ipu_coredev->dev;
-
- return imx_add_platform_device_dmamask("mx3_sdc_fb", -1,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata),
- DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mx2-camera.c b/arch/arm/mach-imx/devices/platform-mx2-camera.c
deleted file mode 100644
index 5375f8b3d079..000000000000
--- a/arch/arm/mach-imx/devices/platform-mx2-camera.c
+++ /dev/null
@@ -1,59 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mx2_camera_data_entry_single(soc, _devid) \
- { \
- .devid = _devid, \
- .iobasecsi = soc ## _CSI_BASE_ADDR, \
- .iosizecsi = SZ_4K, \
- .irqcsi = soc ## _INT_CSI, \
- }
-#define imx_mx2_camera_data_entry_single_emma(soc, _devid) \
- { \
- .devid = _devid, \
- .iobasecsi = soc ## _CSI_BASE_ADDR, \
- .iosizecsi = SZ_32, \
- .irqcsi = soc ## _INT_CSI, \
- .iobaseemmaprp = soc ## _EMMAPRP_BASE_ADDR, \
- .iosizeemmaprp = SZ_32, \
- .irqemmaprp = soc ## _INT_EMMAPRP, \
- }
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst =
- imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera");
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-struct platform_device *__init imx_add_mx2_camera(
- const struct imx_mx2_camera_data *data,
- const struct mx2_camera_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobasecsi,
- .end = data->iobasecsi + data->iosizecsi - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irqcsi,
- .end = data->irqcsi,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->iobaseemmaprp,
- .end = data->iobaseemmaprp + data->iosizeemmaprp - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irqemmaprp,
- .end = data->irqemmaprp,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask(data->devid, 0,
- res, data->iobaseemmaprp ? 4 : 2,
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
-
diff --git a/arch/arm/mach-imx/devices/platform-mx2-emma.c b/arch/arm/mach-imx/devices/platform-mx2-emma.c
deleted file mode 100644
index 20f28ba16f36..000000000000
--- a/arch/arm/mach-imx/devices/platform-mx2-emma.c
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mx2_emmaprp_data_entry_single(soc) \
- { \
- .iobase = soc ## _EMMAPRP_BASE_ADDR, \
- .iosize = SZ_256, \
- .irq = soc ## _INT_EMMAPRP, \
- }
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mx2_emma_data imx27_mx2_emmaprp_data __initconst =
- imx_mx2_emmaprp_data_entry_single(MX27);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-struct platform_device *__init imx_add_mx2_emmaprp(
- const struct imx_mx2_emma_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask("m2m-emmaprp", 0,
- res, 2, NULL, 0, DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mxc-ehci.c b/arch/arm/mach-imx/devices/platform-mxc-ehci.c
deleted file mode 100644
index d9d7cc71633f..000000000000
--- a/arch/arm/mach-imx/devices/platform-mxc-ehci.c
+++ /dev/null
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/dma-mapping.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mxc_ehci_data_entry_single(soc, _id, hs) \
- { \
- .id = _id, \
- .iobase = soc ## _USB_ ## hs ## _BASE_ADDR, \
- .irq = soc ## _INT_USB_ ## hs, \
- }
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst =
- imx_mxc_ehci_data_entry_single(MX27, 0, OTG);
-const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst = {
- imx_mxc_ehci_data_entry_single(MX27, 1, HS1),
- imx_mxc_ehci_data_entry_single(MX27, 2, HS2),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst =
- imx_mxc_ehci_data_entry_single(MX31, 0, OTG);
-const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst = {
- imx_mxc_ehci_data_entry_single(MX31, 1, HS1),
- imx_mxc_ehci_data_entry_single(MX31, 2, HS2),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst =
- imx_mxc_ehci_data_entry_single(MX35, 0, OTG);
-const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst =
- imx_mxc_ehci_data_entry_single(MX35, 1, HS);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_mxc_ehci(
- const struct imx_mxc_ehci_data *data,
- const struct mxc_usbh_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask("mxc-ehci", data->id,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mxc-mmc.c b/arch/arm/mach-imx/devices/platform-mxc-mmc.c
deleted file mode 100644
index cd4c502bc152..000000000000
--- a/arch/arm/mach-imx/devices/platform-mxc-mmc.c
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/dma-mapping.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size) \
- { \
- .devid = _devid, \
- .id = _id, \
- .iobase = soc ## _SDHC ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_SDHC ## _hwid, \
- .dmareq = soc ## _DMA_REQ_SDHC ## _hwid, \
- }
-#define imx_mxc_mmc_data_entry(soc, _devid, _id, _hwid, _size) \
- [_id] = imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst = {
-#define imx21_mxc_mmc_data_entry(_id, _hwid) \
- imx_mxc_mmc_data_entry(MX21, "imx21-mmc", _id, _hwid, SZ_4K)
- imx21_mxc_mmc_data_entry(0, 1),
- imx21_mxc_mmc_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst = {
-#define imx27_mxc_mmc_data_entry(_id, _hwid) \
- imx_mxc_mmc_data_entry(MX27, "imx21-mmc", _id, _hwid, SZ_4K)
- imx27_mxc_mmc_data_entry(0, 1),
- imx27_mxc_mmc_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst = {
-#define imx31_mxc_mmc_data_entry(_id, _hwid) \
- imx_mxc_mmc_data_entry(MX31, "imx31-mmc", _id, _hwid, SZ_16K)
- imx31_mxc_mmc_data_entry(0, 1),
- imx31_mxc_mmc_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-struct platform_device *__init imx_add_mxc_mmc(
- const struct imx_mxc_mmc_data *data,
- const struct imxmmc_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->dmareq,
- .end = data->dmareq,
- .flags = IORESOURCE_DMA,
- },
- };
- return imx_add_platform_device_dmamask(data->devid, data->id,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mxc_nand.c b/arch/arm/mach-imx/devices/platform-mxc_nand.c
deleted file mode 100644
index 0f5f741f897f..000000000000
--- a/arch/arm/mach-imx/devices/platform-mxc_nand.c
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/sizes.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mxc_nand_data_entry_single(soc, _devid, _size) \
- { \
- .devid = _devid, \
- .iobase = soc ## _NFC_BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_NFC \
- }
-
-#define imx_mxc_nandv3_data_entry_single(soc, _devid, _size) \
- { \
- .devid = _devid, \
- .id = -1, \
- .iobase = soc ## _NFC_BASE_ADDR, \
- .iosize = _size, \
- .axibase = soc ## _NFC_AXI_BASE_ADDR, \
- .irq = soc ## _INT_NFC \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX31, "imx27-nand", SZ_4K);
-#endif
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX35, "imx25-nand", SZ_8K);
-#endif
-
-struct platform_device *__init imx_add_mxc_nand(
- const struct imx_mxc_nand_data *data,
- const struct mxc_nand_platform_data *pdata)
-{
- /* AXI has to come first, that's how the mxc_nand driver expect it */
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->axibase,
- .end = data->axibase + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- };
- return imx_add_platform_device(data->devid, data->id,
- res, ARRAY_SIZE(res) - !data->axibase,
- pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mxc_rtc.c b/arch/arm/mach-imx/devices/platform-mxc_rtc.c
deleted file mode 100644
index 0c746de1dd1d..000000000000
--- a/arch/arm/mach-imx/devices/platform-mxc_rtc.c
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010-2011 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mxc_rtc_data_entry_single(soc, _devid) \
- { \
- .devid = _devid, \
- .iobase = soc ## _RTC_BASE_ADDR, \
- .irq = soc ## _INT_RTC, \
- }
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_rtc_data imx31_mxc_rtc_data __initconst =
- imx_mxc_rtc_data_entry_single(MX31, "imx21-rtc");
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_mxc_rtc_data imx35_mxc_rtc_data __initconst =
- imx_mxc_rtc_data_entry_single(MX35, "imx21-rtc");
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_mxc_rtc(
- const struct imx_mxc_rtc_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device(data->devid, -1,
- res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-imx/devices/platform-mxc_w1.c b/arch/arm/mach-imx/devices/platform-mxc_w1.c
deleted file mode 100644
index ab42c6b0542c..000000000000
--- a/arch/arm/mach-imx/devices/platform-mxc_w1.c
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mxc_w1_data_entry_single(soc) \
- { \
- .iobase = soc ## _OWIRE_BASE_ADDR, \
- }
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst =
- imx_mxc_w1_data_entry_single(MX21);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst =
- imx_mxc_w1_data_entry_single(MX27);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst =
- imx_mxc_w1_data_entry_single(MX31);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst =
- imx_mxc_w1_data_entry_single(MX35);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_mxc_w1(
- const struct imx_mxc_w1_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- };
-
- return imx_add_platform_device("mxc_w1", 0,
- res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-imx/devices/platform-pata_imx.c b/arch/arm/mach-imx/devices/platform-pata_imx.c
deleted file mode 100644
index 0e985fffba78..000000000000
--- a/arch/arm/mach-imx/devices/platform-pata_imx.c
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_pata_imx_data_entry_single(soc, _size) \
- { \
- .iobase = soc ## _ATA_BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_ATA, \
- }
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_pata_imx_data imx27_pata_imx_data __initconst =
- imx_pata_imx_data_entry_single(MX27, SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_pata_imx_data imx31_pata_imx_data __initconst =
- imx_pata_imx_data_entry_single(MX31, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_pata_imx_data imx35_pata_imx_data __initconst =
- imx_pata_imx_data_entry_single(MX35, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_pata_imx(
- const struct imx_pata_imx_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device("pata_imx", -1,
- res, ARRAY_SIZE(res), NULL, 0);
-}
-
diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
deleted file mode 100644
index 40c261071144..000000000000
--- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Pengutronix, Wolfram Sang <kernel@pengutronix.de>
- */
-
-#include <linux/platform_data/mmc-esdhc-imx.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \
- { \
- .devid = _devid, \
- .id = _id, \
- .iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR, \
- .irq = soc ## _INT_ESDHC ## hwid, \
- }
-
-#define imx_sdhci_esdhc_imx_data_entry(soc, devid, id, hwid) \
- [id] = imx_sdhci_esdhc_imx_data_entry_single(soc, devid, id, hwid)
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_sdhci_esdhc_imx_data
-imx35_sdhci_esdhc_imx_data[] __initconst = {
-#define imx35_sdhci_esdhc_imx_data_entry(_id, _hwid) \
- imx_sdhci_esdhc_imx_data_entry(MX35, "sdhci-esdhc-imx35", _id, _hwid)
- imx35_sdhci_esdhc_imx_data_entry(0, 1),
- imx35_sdhci_esdhc_imx_data_entry(1, 2),
- imx35_sdhci_esdhc_imx_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-static const struct esdhc_platform_data default_esdhc_pdata __initconst = {
- .wp_type = ESDHC_WP_NONE,
- .cd_type = ESDHC_CD_NONE,
-};
-
-struct platform_device *__init imx_add_sdhci_esdhc_imx(
- const struct imx_sdhci_esdhc_imx_data *data,
- const struct esdhc_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- /*
- * If machine does not provide pdata, use the default one
- * which means no WP/CD support
- */
- if (!pdata)
- pdata = &default_esdhc_pdata;
-
- return imx_add_platform_device_dmamask(data->devid, data->id, res,
- ARRAY_SIZE(res), pdata, sizeof(*pdata),
- DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c
deleted file mode 100644
index 27747bf628a3..000000000000
--- a/arch/arm/mach-imx/devices/platform-spi_imx.c
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/gpio/machine.h>
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \
- { \
- .devid = _devid, \
- .id = _id, \
- .iobase = soc ## _ ## type ## hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_ ## type ## hwid, \
- }
-
-#define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size) \
- [id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size)
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
-#define imx21_cspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K)
- imx21_cspi_data_entry(0, 1),
- imx21_cspi_data_entry(1, 2),
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_spi_imx_data imx27_cspi_data[] __initconst = {
-#define imx27_cspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX27, CSPI, "imx27-cspi", _id, _hwid, SZ_4K)
- imx27_cspi_data_entry(0, 1),
- imx27_cspi_data_entry(1, 2),
- imx27_cspi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_spi_imx_data imx31_cspi_data[] __initconst = {
-#define imx31_cspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX31, CSPI, "imx31-cspi", _id, _hwid, SZ_4K)
- imx31_cspi_data_entry(0, 1),
- imx31_cspi_data_entry(1, 2),
- imx31_cspi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_spi_imx_data imx35_cspi_data[] __initconst = {
-#define imx35_cspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX35, CSPI, "imx35-cspi", _id, _hwid, SZ_4K)
- imx35_cspi_data_entry(0, 1),
- imx35_cspi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_spi_imx(
- const struct imx_spi_imx_data *data, struct gpiod_lookup_table *gtable)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- if (gtable)
- gpiod_add_lookup_table(gtable);
- return imx_add_platform_device(data->devid, data->id,
- res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-imx/mach-imx27.c b/arch/arm/mach-imx/mach-imx27.c
index 84396ccf23f2..262422a9c196 100644
--- a/arch/arm/mach-imx/mach-imx27.c
+++ b/arch/arm/mach-imx/mach-imx27.c
@@ -14,7 +14,6 @@
#include <asm/mach/time.h>
#include "common.h"
-#include "devices/devices-common.h"
#include "hardware.h"
#include "mx27.h"
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 35883fa70479..4df7edc7ae7c 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -19,7 +19,6 @@
#include "common.h"
#include "crmregs-imx3.h"
-#include "devices/devices-common.h"
#include "hardware.h"
void __iomem *mx3_ccm_base;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH 4/9] ARM: imx27: Retrieve AVIC base address from devicetree
2020-09-11 12:40 ` [PATCH 4/9] ARM: imx27: Retrieve AVIC base address from devicetree Fabio Estevam
@ 2020-09-11 14:29 ` Arnd Bergmann
2020-09-11 15:38 ` Fabio Estevam
0 siblings, 1 reply; 13+ messages in thread
From: Arnd Bergmann @ 2020-09-11 14:29 UTC (permalink / raw)
To: Fabio Estevam; +Cc: Linux ARM, Shawn Guo, NXP Linux Team, Sascha Hauer
On Fri, Sep 11, 2020 at 2:41 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> Now that imx27 has been converted to a devicetree-only platform,
> retrieve the AVIC base address from devicetree.
>
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
> static void __init mx27_init_irq(void)
> {
> - mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
> + void __iomem *avic_base;
> + struct device_node *np;
> +
> + np = of_find_compatible_node(NULL, NULL, "fsl,avic");
> + avic_base = of_iomap(np, 0);
> + BUG_ON(!avic_base);
> + mxc_init_irq(avic_base);
> }
>
I see this function is identical to mx25_init_irq(). Maybe just move the code
into mxc_init_irq() directly and pass NULL from mx27_init_irq()?
Are you able to completely eliminate MX27_IO_ADDRESS()? If not,
I probably wouldn't bother, but if you can, that sounds like a useful
cleanup.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/9] ARM: imx: Remove more board related code
2020-09-11 12:40 [PATCH 0/9] ARM: imx: Remove more board related code Fabio Estevam
` (7 preceding siblings ...)
2020-09-11 12:40 ` [PATCH 8/9] ARM: imx: Remove imx device directory Fabio Estevam
@ 2020-09-11 14:30 ` Arnd Bergmann
2020-09-13 3:16 ` Shawn Guo
9 siblings, 0 replies; 13+ messages in thread
From: Arnd Bergmann @ 2020-09-11 14:30 UTC (permalink / raw)
To: Fabio Estevam; +Cc: Linux ARM, Shawn Guo, NXP Linux Team, Sascha Hauer
On Fri, Sep 11, 2020 at 2:40 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> Now that i.MX board files have been removed, here is another
> round of cleanup that removes unused code.
>
> Fabio Estevam (9):
> ARM: imx27: Remove imx27_soc_init()
> ARM: imx27: Remove iomux-v1 board code
> ARM: imx27: Get rid of mm-imx27.c
> ARM: imx27: Retrieve AVIC base address from devicetree
> ARM: imx31: Remove remaining i.MX31 board code
> ARM: imx3: Remove imx3 soc_init()
> ARM: imx: Remove iomux-v3 board code
> ARM: imx: Remove imx device directory
> ARM: imx: Remove remnant board file support pieces
Nice cleanup!
Whole series (regardless of the one comment I had):
Acked-by: Arnd Bergmann <arnd@arndb.de>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 4/9] ARM: imx27: Retrieve AVIC base address from devicetree
2020-09-11 14:29 ` Arnd Bergmann
@ 2020-09-11 15:38 ` Fabio Estevam
0 siblings, 0 replies; 13+ messages in thread
From: Fabio Estevam @ 2020-09-11 15:38 UTC (permalink / raw)
To: Arnd Bergmann; +Cc: Linux ARM, Shawn Guo, NXP Linux Team, Sascha Hauer
Hi Arnd,
On Fri, Sep 11, 2020 at 11:29 AM Arnd Bergmann <arnd@arndb.de> wrote:
> I see this function is identical to mx25_init_irq(). Maybe just move the code
> into mxc_init_irq() directly and pass NULL from mx27_init_irq()?
Yes, good idea. I will do as suggested on a follow-up series.
> Are you able to completely eliminate MX27_IO_ADDRESS()? If not,
> I probably wouldn't bother, but if you can, that sounds like a useful
> cleanup.
Yes, I plan to eliminate MX27_IO_ADDRESS(), MX31_IO_ADDRESS() and
MX35_IO_ADDRESS().
Will handle this in a follow-up series as well after this one lands in
linux-next.
Thanks,
Fabio Estevam
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/9] ARM: imx: Remove more board related code
2020-09-11 12:40 [PATCH 0/9] ARM: imx: Remove more board related code Fabio Estevam
` (8 preceding siblings ...)
2020-09-11 14:30 ` [PATCH 0/9] ARM: imx: Remove more board related code Arnd Bergmann
@ 2020-09-13 3:16 ` Shawn Guo
9 siblings, 0 replies; 13+ messages in thread
From: Shawn Guo @ 2020-09-13 3:16 UTC (permalink / raw)
To: Fabio Estevam; +Cc: linux-arm-kernel, arnd, linux-imx, kernel
On Fri, Sep 11, 2020 at 09:40:25AM -0300, Fabio Estevam wrote:
> Now that i.MX board files have been removed, here is another
> round of cleanup that removes unused code.
>
> Fabio Estevam (9):
> ARM: imx27: Remove imx27_soc_init()
> ARM: imx27: Remove iomux-v1 board code
> ARM: imx27: Get rid of mm-imx27.c
> ARM: imx27: Retrieve AVIC base address from devicetree
> ARM: imx31: Remove remaining i.MX31 board code
> ARM: imx3: Remove imx3 soc_init()
> ARM: imx: Remove iomux-v3 board code
> ARM: imx: Remove imx device directory
> ARM: imx: Remove remnant board file support pieces
Applied all, thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2020-09-13 3:18 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-11 12:40 [PATCH 0/9] ARM: imx: Remove more board related code Fabio Estevam
2020-09-11 12:40 ` [PATCH 1/9] ARM: imx27: Remove imx27_soc_init() Fabio Estevam
2020-09-11 12:40 ` [PATCH 2/9] ARM: imx27: Remove iomux-v1 board code Fabio Estevam
2020-09-11 12:40 ` [PATCH 3/9] ARM: imx27: Get rid of mm-imx27.c Fabio Estevam
2020-09-11 12:40 ` [PATCH 4/9] ARM: imx27: Retrieve AVIC base address from devicetree Fabio Estevam
2020-09-11 14:29 ` Arnd Bergmann
2020-09-11 15:38 ` Fabio Estevam
2020-09-11 12:40 ` [PATCH 5/9] ARM: imx31: Remove remaining i.MX31 board code Fabio Estevam
2020-09-11 12:40 ` [PATCH 6/9] ARM: imx3: Remove imx3 soc_init() Fabio Estevam
2020-09-11 12:40 ` [PATCH 7/9] ARM: imx: Remove iomux-v3 board code Fabio Estevam
2020-09-11 12:40 ` [PATCH 8/9] ARM: imx: Remove imx device directory Fabio Estevam
2020-09-11 14:30 ` [PATCH 0/9] ARM: imx: Remove more board related code Arnd Bergmann
2020-09-13 3:16 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).