From: Rob Herring <robh@kernel.org>
To: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: devicetree@vger.kernel.org, drinkcat@chromium.org,
weiyi.lu@mediatek.com, linux-kernel@vger.kernel.org,
fparent@baylibre.com, Matthias Brugger <mbrugger@suse.com>,
linux-mediatek@lists.infradead.org, hsinyi@chromium.org,
matthias.bgg@gmail.com,
Collabora Kernel ML <kernel@collabora.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 01/12] dt-bindings: power: Add bindings for the Mediatek SCPSYS power domains controller
Date: Fri, 11 Sep 2020 17:02:55 -0600 [thread overview]
Message-ID: <20200911230255.GA2972120@bogus> (raw)
In-Reply-To: <20200910172826.3074357-2-enric.balletbo@collabora.com>
On Thu, Sep 10, 2020 at 07:28:15PM +0200, Enric Balletbo i Serra wrote:
> The System Control Processor System (SCPSYS) has several power management
> related tasks in the system. Add the bindings to define the power
> domains for the SCPSYS power controller.
>
> Co-developed-by: Matthias Brugger <mbrugger@suse.com>
> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> Dear Rob,
>
> I am awasre that this binding is not ready, but I prefered to send because I'm
> kind of blocked. Compiling this binding triggers the following error:
>
> mediatek,power-controller.example.dt.yaml: syscon@10006000: mfg_async@7:
> '#address-cells', '#size-cells', 'mfg_2d@8'
> do not match any of the regexes: 'pinctrl-[0-9]+'
>
> This happens when a definition of a power-domain (parent) contains
> another power-domain (child), like the example. I am not sure how to
> specify this in the yaml and deal with this, so any clue is welcome.
You just have to keep nesting schemas all the way down. Define a
grandchild node under the child node and then all of its properties.
>
> Thanks,
> Enric
>
> .../power/mediatek,power-controller.yaml | 171 ++++++++++++++++++
> 1 file changed, 171 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
>
> diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
> new file mode 100644
> index 000000000000..8be9244ad160
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
> @@ -0,0 +1,171 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/mediatek,power-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek Power Domains Controller
> +
> +maintainers:
> + - Weiyi Lu <weiyi.lu@mediatek.com>
> + - Matthias Brugger <mbrugger@suse.com>
> +
> +description: |
> + Mediatek processors include support for multiple power domains which can be
> + powered up/down by software based on different application scenes to save power.
> +
> + IP cores belonging to a power domain should contain a 'power-domains'
> + property that is a phandle for SCPSYS node representing the domain.
> +
> +properties:
> + $nodename:
> + pattern: "^syscon@[0-9a-f]+$"
> +
> + compatible:
> + items:
> + - enum:
> + - mediatek,mt8173-power-controller
> + - const: syscon
> +
> + reg:
> + maxItems: 1
> +
> +patternProperties:
> + "^.*@[0-9]$":
Node names should be generic:
power-domain@
> + type: object
> + description: |
> + Represents the power domains within the power controller node as documented
> + in Documentation/devicetree/bindings/power/power-domain.yaml.
> +
> + properties:
> + reg:
> + description: |
> + Power domain index. Valid values are defined in:
> + "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
> + maxItems: 1
> +
> + '#power-domain-cells':
> + description:
> + Documented by the generic PM Domain bindings in
> + Documentation/devicetree/bindings/power/power-domain.yaml.
No need to redefine a common property. This should define valid values
for it.
> +
> + clocks:
> + description: |
> + A number of phandles to clocks that need to be enabled during domain
> + power-up sequencing.
No need to redefine 'clocks'. You need to define how many, what each one
is, and the order.
> +
> + clock-names:
> + description: |
> + List of names of clocks, in order to match the power-up sequencing
> + for each power domain we need to group the clocks by name. BASIC
> + clocks need to be enabled before enabling the corresponding power
> + domain, and should not have a '-' in their name (i.e mm, mfg, venc).
> + SUSBYS clocks need to be enabled before releasing the bus protection,
> + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
> +
> + In order to follow properly the power-up sequencing, the clocks must
> + be specified by order, adding first the BASIC clocks followed by the
> + SUSBSYS clocks.
You need to define the names.
> +
> + mediatek,infracfg:
> + $ref: /schemas/types.yaml#definitions/phandle
> + description: phandle to the device containing the INFRACFG register range.
> +
> + mediatek,smi:
> + $ref: /schemas/types.yaml#definitions/phandle
> + description: phandle to the device containing the SMI register range.
> +
> + required:
> + - reg
> + - '#power-domain-cells'
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8173-clk.h>
> + #include <dt-bindings/power/mt8173-power.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + scpsys: syscon@10006000 {
> + compatible = "mediatek,mt8173-power-controller", "syscon";
> + reg = <0 0x10006000 0 0x1000>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* power domains of the SoC */
> + vdec@MT8173_POWER_DOMAIN_VDEC {
> + reg = <MT8173_POWER_DOMAIN_VDEC>;
> + clocks = <&topckgen CLK_TOP_MM_SEL>;
> + clock-names = "mm";
> + #power-domain-cells = <0>;
> + };
> +
> + venc@MT8173_POWER_DOMAIN_VENC {
> + reg = <MT8173_POWER_DOMAIN_VENC>;
> + clocks = <&topckgen CLK_TOP_MM_SEL>,
> + <&topckgen CLK_TOP_VENC_SEL>;
> + clock-names = "mm", "venc";
> + #power-domain-cells = <0>;
> + };
> + isp@MT8173_POWER_DOMAIN_ISP {
> + reg = <MT8173_POWER_DOMAIN_ISP>;
> + clocks = <&topckgen CLK_TOP_MM_SEL>;
> + clock-names = "mm";
> + #power-domain-cells = <0>;
> + };
> + mm@MT8173_POWER_DOMAIN_MM {
> + reg = <MT8173_POWER_DOMAIN_MM>;
> + clocks = <&topckgen CLK_TOP_MM_SEL>;
> + clock-names = "mm";
> + #power-domain-cells = <0>;
> + mediatek,infracfg = <&infracfg>;
> + };
> + venc_lt@MT8173_POWER_DOMAIN_VENC_LT {
> + reg = <MT8173_POWER_DOMAIN_VENC_LT>;
> + clocks = <&topckgen CLK_TOP_MM_SEL>,
> + <&topckgen CLK_TOP_VENC_LT_SEL>;
> + clock-names = "mm", "venclt";
> + #power-domain-cells = <0>;
> + };
> + audio@MT8173_POWER_DOMAIN_AUDIO {
> + reg = <MT8173_POWER_DOMAIN_AUDIO>;
> + #power-domain-cells = <0>;
> + };
> + usb@MT8173_POWER_DOMAIN_USB {
> + reg = <MT8173_POWER_DOMAIN_USB>;
> + #power-domain-cells = <0>;
> + };
> + mfg_async@MT8173_POWER_DOMAIN_MFG_ASYNC {
> + reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
> + clocks = <&clk26m>;
> + clock-names = "mfg";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #power-domain-cells = <1>;
> +
> + mfg_2d@MT8173_POWER_DOMAIN_MFG_2D {
> + reg = <MT8173_POWER_DOMAIN_MFG_2D>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #power-domain-cells = <1>;
> +
> + mfg@MT8173_POWER_DOMAIN_MFG {
> + reg = <MT8173_POWER_DOMAIN_MFG>;
> + #power-domain-cells = <0>;
> + mediatek,infracfg = <&infracfg>;
> + };
> + };
> + };
> + };
> + };
> --
> 2.28.0
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-11 23:04 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-10 17:28 [PATCH 00/12] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Enric Balletbo i Serra
2020-09-10 17:28 ` [PATCH 01/12] dt-bindings: power: Add bindings for the Mediatek " Enric Balletbo i Serra
2020-09-11 23:02 ` Rob Herring [this message]
2020-09-14 8:59 ` Matthias Brugger
2020-09-14 9:49 ` Enric Balletbo i Serra
2020-09-22 22:36 ` Rob Herring
2020-09-23 16:12 ` Enric Balletbo i Serra
2020-09-10 17:28 ` [PATCH 02/12] soc: mediatek: Add MediaTek SCPSYS power domains Enric Balletbo i Serra
2020-09-25 10:25 ` Weiyi Lu
2020-09-25 10:43 ` Matthias Brugger
2020-09-10 17:28 ` [PATCH 03/12] arm64: dts: mediatek: Add mt8173 power domain controller Enric Balletbo i Serra
2020-09-18 20:20 ` Fabien Parent
2020-09-18 20:50 ` Enric Balletbo Serra
2020-09-10 17:28 ` [PATCH 04/12] soc: mediatek: pm-domains: Add bus protection protocol Enric Balletbo i Serra
2020-09-10 17:28 ` [PATCH 05/12] soc: mediatek: pm_domains: Make bus protection generic Enric Balletbo i Serra
2020-09-10 17:28 ` [PATCH 06/12] soc: mediatek: pm-domains: Add SMI block as bus protection block Enric Balletbo i Serra
2020-09-25 10:45 ` Weiyi Lu
2020-09-25 11:01 ` Matthias Brugger
2020-09-10 17:28 ` [PATCH 07/12] soc: mediatek: pm-domains: Add extra sram control Enric Balletbo i Serra
2020-09-10 18:27 ` Matthias Brugger
2020-10-26 15:16 ` Enric Balletbo i Serra
2020-09-10 17:28 ` [PATCH 08/12] soc: mediatek: pm-domains: Add subsystem clocks Enric Balletbo i Serra
2020-09-25 10:55 ` Weiyi Lu
2020-09-25 12:20 ` Matthias Brugger
2020-09-10 17:28 ` [PATCH 09/12] soc: mediatek: pm-domains: Allow bus protection to ignore clear ack Enric Balletbo i Serra
2020-09-10 17:28 ` [PATCH 10/12] dt-bindings: power: Add MT8183 power domains Enric Balletbo i Serra
2020-09-10 17:28 ` [PATCH 11/12] soc: mediatek: pm-domains: Add support for mt8183 Enric Balletbo i Serra
2020-09-16 9:46 ` Matthias Brugger
2020-09-16 12:19 ` Matthias Brugger
2020-09-25 7:37 ` Hsin-Yi Wang
2020-09-25 8:21 ` Enric Balletbo i Serra
2020-09-25 9:07 ` Matthias Brugger
2020-09-10 17:28 ` [PATCH 12/12] arm64: dts: mediatek: Add mt8183 power domains controller Enric Balletbo i Serra
2020-09-25 10:06 ` [PATCH 00/12] soc: mediatek: pm-domains: Add new driver for SCPSYS " Weiyi Lu
2020-09-25 14:04 ` Matthias Brugger
2020-10-06 6:53 ` Weiyi Lu
2020-10-09 12:50 ` Matthias Brugger
2020-10-09 13:57 ` Enric Balletbo i Serra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200911230255.GA2972120@bogus \
--to=robh@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@chromium.org \
--cc=enric.balletbo@collabora.com \
--cc=fparent@baylibre.com \
--cc=hsinyi@chromium.org \
--cc=kernel@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=mbrugger@suse.com \
--cc=weiyi.lu@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).