Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Mark Rutland <mark.rutland@arm.com>,
	Rob Herring <robh+dt@kernel.org>,
	Frank Rowand <frowand.list@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>
Cc: devicetree@vger.kernel.org, Maxime Ripard <maxime@cerno.tech>,
	Eric Anholt <eric@anholt.net>,
	bcm-kernel-feedback-list@broadcom.com,
	linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	Stefan Wahren <wahrenst@gmx.net>
Subject: [PATCH] ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfd
Date: Thu, 24 Sep 2020 10:26:42 +0200
Message-ID: <20200924082642.18144-1-maxime@cerno.tech> (raw)

The current binding for the RPi firmware uses the simple-bus compatible as
a fallback to benefit from its automatic probing of child nodes.

However, simple-bus also comes with some constraints, like having the ranges,
our case.

Let's switch to simple-mfd that provides the same probing logic without
those constraints.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 .../bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml        | 4 ++--
 arch/arm/boot/dts/bcm2835-rpi.dtsi                            | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
index 17e4f20c8d39..6834f5e8df5f 100644
--- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
@@ -23,7 +23,7 @@ properties:
   compatible:
     items:
       - const: raspberrypi,bcm2835-firmware
-      - const: simple-bus
+      - const: simple-mfd
 
   mboxes:
     $ref: '/schemas/types.yaml#/definitions/phandle'
@@ -57,7 +57,7 @@ required:
 examples:
   - |
     firmware {
-        compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+        compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
         mboxes = <&mailbox>;
 
         firmware_clocks: clocks {
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index f7ae5a4530b8..d94357b21f7e 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -13,7 +13,7 @@ act {
 
 	soc {
 		firmware: firmware {
-			compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+			compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-24  8:26 Maxime Ripard [this message]
2020-09-28 16:19 ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200924082642.18144-1-maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=devicetree@vger.kernel.org \
    --cc=eric@anholt.net \
    --cc=f.fainelli@gmail.com \
    --cc=frowand.list@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=nsaenzjulienne@suse.de \
    --cc=rjui@broadcom.com \
    --cc=robh+dt@kernel.org \
    --cc=sbranden@broadcom.com \
    --cc=wahrenst@gmx.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git