From: Faiz Abbas <faiz_abbas@ti.com>
To: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Cc: nm@ti.com, t-kristo@ti.com, robh+dt@kernel.org, will@kernel.org,
faiz_abbas@ti.com
Subject: [PATCH 4/8] arm64: dts: ti: k3-j721e-main: Add output tap delay values
Date: Fri, 2 Oct 2020 00:35:37 +0530 [thread overview]
Message-ID: <20201001190541.6364-5-faiz_abbas@ti.com> (raw)
In-Reply-To: <20201001190541.6364-1-faiz_abbas@ti.com>
Add output tap delay values as given in the latest Data Manual[1].
[1] https://www.ti.com/lit/gpn/tda4vm
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index e2a96b2c423c..630b195cbc8a 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1081,7 +1081,11 @@
bus-width = <8>;
mmc-hs400-1_8v;
mmc-ddr-1_8v;
- ti,otap-del-sel = <0x2>;
+ ti,otap-del-sel-legacy = <0xf>;
+ ti,otap-del-sel-mmc-hs = <0xf>;
+ ti,otap-del-sel-ddr52 = <0x5>;
+ ti,otap-del-sel-hs200 = <0x6>;
+ ti,otap-del-sel-hs400 = <0x0>;
ti,trm-icp = <0x8>;
ti,strobe-sel = <0x77>;
dma-coherent;
@@ -1096,7 +1100,12 @@
clocks = <&k3_clks 92 0>, <&k3_clks 92 5>;
assigned-clocks = <&k3_clks 92 0>;
assigned-clock-parents = <&k3_clks 92 1>;
- ti,otap-del-sel = <0x2>;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-sd-hs = <0xf>;
+ ti,otap-del-sel-sdr12 = <0xf>;
+ ti,otap-del-sel-sdr25 = <0xf>;
+ ti,otap-del-sel-sdr50 = <0xc>;
+ ti,otap-del-sel-ddr50 = <0xc>;
ti,trm-icp = <0x8>;
ti,clkbuf-sel = <0x7>;
dma-coherent;
@@ -1112,7 +1121,12 @@
clocks = <&k3_clks 93 0>, <&k3_clks 93 5>;
assigned-clocks = <&k3_clks 93 0>;
assigned-clock-parents = <&k3_clks 93 1>;
- ti,otap-del-sel = <0x2>;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-sd-hs = <0xf>;
+ ti,otap-del-sel-sdr12 = <0xf>;
+ ti,otap-del-sel-sdr25 = <0xf>;
+ ti,otap-del-sel-sdr50 = <0xc>;
+ ti,otap-del-sel-ddr50 = <0xc>;
ti,trm-icp = <0x8>;
ti,clkbuf-sel = <0x7>;
dma-coherent;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-10-01 19:07 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-01 19:05 [PATCH 0/8] Add support for UHS modes in TI's J721e and J7200 boards Faiz Abbas
2020-10-01 19:05 ` [PATCH 1/8] arm64: dts: ti: k3-j7200-main: Add gpio nodes in main domain Faiz Abbas
2020-10-01 19:05 ` [PATCH 2/8] arm64: dts: ti: k3-j7200: Add gpio nodes in wakeup domain Faiz Abbas
2020-10-01 19:05 ` [PATCH 3/8] arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio modules Faiz Abbas
2020-10-01 19:05 ` Faiz Abbas [this message]
2020-10-01 19:05 ` [PATCH 5/8] arm64: dts: ti: k3-j721e-common-proc-board: Add support SD card UHS modes Faiz Abbas
2020-10-01 19:05 ` [PATCH 6/8] arm64: dts: ti: k3-j7200-common-proc-board: " Faiz Abbas
2020-10-01 19:13 ` [PATCH 0/8] Add support for UHS modes in TI's J721e and J7200 boards Nishanth Menon
2020-10-02 4:44 ` Faiz Abbas
2020-10-02 12:49 ` Nishanth Menon
2020-10-02 16:09 ` Faiz Abbas
2020-10-26 14:55 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201001190541.6364-5-faiz_abbas@ti.com \
--to=faiz_abbas@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).