From: Stanley Chu <stanley.chu@mediatek.com>
To: <linux-scsi@vger.kernel.org>, <martin.petersen@oracle.com>,
<avri.altman@wdc.com>, <alim.akhtar@samsung.com>,
<jejb@linux.ibm.com>
Cc: chun-hung.wu@mediatek.com, alice.chao@mediatek.com,
Stanley Chu <stanley.chu@mediatek.com>,
andy.teng@mediatek.com, cc.chou@mediatek.com,
peter.wang@mediatek.com, kuohong.wang@mediatek.com,
linux-kernel@vger.kernel.org, kwmad.kim@samsung.com,
jiajie.hao@mediatek.com, cang@codeaurora.org,
linux-mediatek@lists.infradead.org, liwei213@huawei.com,
matthias.bgg@gmail.com, beanhuo@micron.com,
chaotian.jing@mediatek.com, linux-arm-kernel@lists.infradead.org,
asutoshd@codeaurora.org
Subject: [PATCH v1 3/9] scsi: ufs-mediatek: Use device parameter initialization function
Date: Mon, 16 Nov 2020 14:50:48 +0800 [thread overview]
Message-ID: <20201116065054.7658-4-stanley.chu@mediatek.com> (raw)
In-Reply-To: <20201116065054.7658-1-stanley.chu@mediatek.com>
Use common device parameter initialization function instead of
initialziing those parameters by vendor driver itself.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
drivers/scsi/ufs/ufs-mediatek.c | 16 +++-------------
drivers/scsi/ufs/ufs-mediatek.h | 16 ----------------
2 files changed, 3 insertions(+), 29 deletions(-)
diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index b9b423752ee1..87b4bf125e23 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -680,19 +680,9 @@ static int ufs_mtk_pre_pwr_change(struct ufs_hba *hba,
u32 adapt_val;
int ret;
- host_cap.tx_lanes = UFS_MTK_LIMIT_NUM_LANES_TX;
- host_cap.rx_lanes = UFS_MTK_LIMIT_NUM_LANES_RX;
- host_cap.hs_rx_gear = UFS_MTK_LIMIT_HSGEAR_RX;
- host_cap.hs_tx_gear = UFS_MTK_LIMIT_HSGEAR_TX;
- host_cap.pwm_rx_gear = UFS_MTK_LIMIT_PWMGEAR_RX;
- host_cap.pwm_tx_gear = UFS_MTK_LIMIT_PWMGEAR_TX;
- host_cap.rx_pwr_pwm = UFS_MTK_LIMIT_RX_PWR_PWM;
- host_cap.tx_pwr_pwm = UFS_MTK_LIMIT_TX_PWR_PWM;
- host_cap.rx_pwr_hs = UFS_MTK_LIMIT_RX_PWR_HS;
- host_cap.tx_pwr_hs = UFS_MTK_LIMIT_TX_PWR_HS;
- host_cap.hs_rate = UFS_MTK_LIMIT_HS_RATE;
- host_cap.desired_working_mode =
- UFS_MTK_LIMIT_DESIRED_MODE;
+ ufshcd_init_pwr_dev_param(&host_cap);
+ host_cap.hs_rx_gear = UFS_HS_G4;
+ host_cap.hs_tx_gear = UFS_HS_G4;
ret = ufshcd_get_pwr_dev_param(&host_cap,
dev_max_params,
diff --git a/drivers/scsi/ufs/ufs-mediatek.h b/drivers/scsi/ufs/ufs-mediatek.h
index ac37b11803fb..93d35097dfb0 100644
--- a/drivers/scsi/ufs/ufs-mediatek.h
+++ b/drivers/scsi/ufs/ufs-mediatek.h
@@ -30,22 +30,6 @@
#define REFCLK_REQ_TIMEOUT_US 3000
-/*
- * Vendor specific pre-defined parameters
- */
-#define UFS_MTK_LIMIT_NUM_LANES_RX 2
-#define UFS_MTK_LIMIT_NUM_LANES_TX 2
-#define UFS_MTK_LIMIT_HSGEAR_RX UFS_HS_G4
-#define UFS_MTK_LIMIT_HSGEAR_TX UFS_HS_G4
-#define UFS_MTK_LIMIT_PWMGEAR_RX UFS_PWM_G4
-#define UFS_MTK_LIMIT_PWMGEAR_TX UFS_PWM_G4
-#define UFS_MTK_LIMIT_RX_PWR_PWM SLOW_MODE
-#define UFS_MTK_LIMIT_TX_PWR_PWM SLOW_MODE
-#define UFS_MTK_LIMIT_RX_PWR_HS FAST_MODE
-#define UFS_MTK_LIMIT_TX_PWR_HS FAST_MODE
-#define UFS_MTK_LIMIT_HS_RATE PA_HS_MODE_B
-#define UFS_MTK_LIMIT_DESIRED_MODE UFS_HS_MODE
-
/*
* Other attributes
*/
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-11-16 7:03 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-16 6:50 [PATCH v1 0/9] scsi: ufs: Refactoring and cleanups Stanley Chu
2020-11-16 6:50 ` [PATCH v1 1/9] scsi: ufs-mediatek: Refactor performance scaling functions Stanley Chu
2020-11-16 6:50 ` [PATCH v1 2/9] scsi: ufs: Introduce device parameter initialization function Stanley Chu
2020-11-16 6:50 ` Stanley Chu [this message]
2020-11-16 6:50 ` [PATCH v1 4/9] scsi: ufs-qcom: Use " Stanley Chu
2020-11-16 6:50 ` [PATCH v1 5/9] scsi: ufs-exynos: " Stanley Chu
2020-11-16 6:50 ` [PATCH v1 6/9] scsi: ufs-hisi: " Stanley Chu
2020-11-16 6:50 ` [PATCH v1 7/9] scsi: ufs: Refactor ADAPT configuration function Stanley Chu
2020-11-16 6:50 ` [PATCH v1 8/9] scsi: ufs-mediatek: Use common " Stanley Chu
2020-11-16 6:50 ` [PATCH v1 9/9] scsi: ufs-qcom: " Stanley Chu
2020-11-16 8:46 ` [PATCH v1 0/9] scsi: ufs: Refactoring and cleanups Bean Huo
2020-11-17 5:50 ` Martin K. Petersen
2020-11-20 3:31 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201116065054.7658-4-stanley.chu@mediatek.com \
--to=stanley.chu@mediatek.com \
--cc=alice.chao@mediatek.com \
--cc=alim.akhtar@samsung.com \
--cc=andy.teng@mediatek.com \
--cc=asutoshd@codeaurora.org \
--cc=avri.altman@wdc.com \
--cc=beanhuo@micron.com \
--cc=cang@codeaurora.org \
--cc=cc.chou@mediatek.com \
--cc=chaotian.jing@mediatek.com \
--cc=chun-hung.wu@mediatek.com \
--cc=jejb@linux.ibm.com \
--cc=jiajie.hao@mediatek.com \
--cc=kuohong.wang@mediatek.com \
--cc=kwmad.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-scsi@vger.kernel.org \
--cc=liwei213@huawei.com \
--cc=martin.petersen@oracle.com \
--cc=matthias.bgg@gmail.com \
--cc=peter.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).