From: Chen-Yu Tsai <wens@kernel.org>
To: Shawn Lin <shawn.lin@rock-chips.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Rob Herring <robh@kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Heiko Stuebner <heiko@sntech.de>
Cc: devicetree@vger.kernel.org, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
Chen-Yu Tsai <wens@csie.org>, Johan Jonker <jbx6244@gmail.com>,
Robin Murphy <robin.murphy@arm.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] arm64: dts: rockchip: rk3399: Add NanoPi M4B
Date: Mon, 16 Nov 2020 15:52:15 +0800 [thread overview]
Message-ID: <20201116075215.15303-5-wens@kernel.org> (raw)
In-Reply-To: <20201116075215.15303-1-wens@kernel.org>
From: Chen-Yu Tsai <wens@csie.org>
The NanoPi M4B is a minor revision of the original M4.
The differences against the original Nanopi M4 that are common with the
other M4V2 revision include:
- microphone header removed
- power button added
- recovery button added
Additional changes specific to the M4B:
- USB 3.0 hub removed; board now has 2x USB 3.0 type-A ports and 2x
USB 2.0 ports
- ADB toggle switch added; this changes the top USB 3.0 host port to
a peripheral port
- Type-C port no longer supports data or PD
- WiFi/Bluetooth combo chip switched to AP6256, which supports BT 5.0
but only 1T1R (down from 2T2R) for WiFi
Add a new dts file for the new board revision that shows the difference
against the original.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3399-nanopi-m4b.dts | 52 +++++++++++++++++++
2 files changed, 53 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 5a53979b7057..fd47414e40eb 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -32,6 +32,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-kobol-helios64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
new file mode 100644
index 000000000000..72182c58cc46
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPi M4B board device tree source
+ *
+ * Copyright (c) 2020 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi-m4.dts"
+
+/ {
+ model = "FriendlyElec NanoPi M4B";
+ compatible = "friendlyarm,nanopi-m4b", "rockchip,rk3399";
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1500000>;
+ poll-interval = <100>;
+
+ recovery {
+ label = "Recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <18000>;
+ };
+ };
+};
+
+/* No USB type-C PD power manager */
+/delete-node/ &fusb0;
+
+&i2c4 {
+ status = "disabled";
+};
+
+&u2phy0_host {
+ phy-supply = <&vcc5v0_usb2>;
+};
+
+&u2phy0_otg {
+ phy-supply = <&vbus_typec>;
+};
+
+&u2phy1_otg {
+ phy-supply = <&vcc5v0_usb1>;
+};
+
+&vbus_typec {
+ enable-active-high;
+ gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+};
--
2.29.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2020-11-16 7:57 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-16 7:52 [PATCH 0/4] arm64: rockchip: Fix PCIe ep-gpios requirement and Add Nanopi M4B Chen-Yu Tsai
2020-11-16 7:52 ` [PATCH 1/4] PCI: rockchip: make ep_gpio optional Chen-Yu Tsai
2020-11-16 16:41 ` Bjorn Helgaas
2020-11-17 3:45 ` Chen-Yu Tsai
2020-11-16 7:52 ` [PATCH 2/4] dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B Chen-Yu Tsai
2020-11-16 7:52 ` [PATCH 3/4] arm64: dts: rockchip: nanopi4: Move ep-gpios property to nanopc-t4 Chen-Yu Tsai
2020-11-16 7:52 ` Chen-Yu Tsai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201116075215.15303-5-wens@kernel.org \
--to=wens@kernel.org \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jbx6244@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=shawn.lin@rock-chips.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).