From: Chen-Yu Tsai <wens@kernel.org>
To: Shawn Lin <shawn.lin@rock-chips.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Rob Herring <robh@kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Heiko Stuebner <heiko@sntech.de>
Cc: devicetree@vger.kernel.org, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
Chen-Yu Tsai <wens@csie.org>, Johan Jonker <jbx6244@gmail.com>,
Robin Murphy <robin.murphy@arm.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/4] arm64: dts: rockchip: nanopi4: Move ep-gpios property to nanopc-t4
Date: Wed, 18 Nov 2020 15:17:23 +0800 [thread overview]
Message-ID: <20201118071724.4866-4-wens@kernel.org> (raw)
In-Reply-To: <20201118071724.4866-1-wens@kernel.org>
From: Chen-Yu Tsai <wens@csie.org>
Only the NanoPC T4 hs the PCIe reset pin routed to the SoC. For the
NanoPi M4 family, no such signal is routed to the expansion header on
the base board.
As the schematics for the expansion board were not released, it is
unclear how this is handled, but the likely answer is that the signal
is always pulled high.
Move the ep-gpios property from the common nanopi4.dtsi file to the
board level nanopc-t4.dts file. This makes the nanopi-m4 lack ep-gpios,
matching the board design.
A companion patch "PCI: rockchip: make ep_gpio optional" for the Linux
driver is required, as the driver currently requires the property to be
present.
Fixes: e7a095908227 ("arm64: dts: rockchip: Add devicetree for NanoPC-T4")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts | 1 +
arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi | 1 -
2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
index e0d75617bb7e..452728b82e42 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
@@ -95,6 +95,7 @@ map3 {
};
&pcie0 {
+ ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
num-lanes = <4>;
vpcie3v3-supply = <&vcc3v3_sys>;
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 76a8b40a93c6..48ed4aaa37f3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -504,7 +504,6 @@ &pcie_phy {
};
&pcie0 {
- ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
max-link-speed = <2>;
num-lanes = <2>;
vpcie0v9-supply = <&vcca0v9_s3>;
--
2.29.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-11-18 7:18 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-18 7:17 [PATCH v2 0/4] arm64: rockchip: Fix PCIe ep-gpios requirement and Add Nanopi M4B Chen-Yu Tsai
2020-11-18 7:17 ` [PATCH v2 1/4] PCI: rockchip: Make 'ep-gpios' DT property optional Chen-Yu Tsai
2020-11-18 8:49 ` Heiko Stübner
2020-12-07 3:30 ` Chen-Yu Tsai
2020-12-07 14:11 ` Rob Herring
2020-12-12 15:18 ` Chen-Yu Tsai
2020-12-14 14:17 ` Rob Herring
2020-11-18 7:17 ` [PATCH v2 2/4] dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B Chen-Yu Tsai
2020-12-07 21:13 ` Rob Herring
2020-11-18 7:17 ` Chen-Yu Tsai [this message]
2020-12-14 15:18 ` [PATCH v2 3/4] arm64: dts: rockchip: nanopi4: Move ep-gpios property to nanopc-t4 Robin Murphy
2020-11-18 7:17 ` [PATCH v2 4/4] arm64: dts: rockchip: rk3399: Add NanoPi M4B Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201118071724.4866-4-wens@kernel.org \
--to=wens@kernel.org \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jbx6244@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=shawn.lin@rock-chips.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).