linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Alice Guo <alice.guo@nxp.com>
To: robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
	krzk@kernel.org
Cc: devicetree@vger.kernel.org, peng.fan@nxp.com, linux-imx@nxp.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v6 4/4] soc: imx8m: change to use platform driver
Date: Tue, 24 Nov 2020 09:59:49 +0800	[thread overview]
Message-ID: <20201124015949.29262-4-alice.guo@nxp.com> (raw)
In-Reply-To: <20201124015949.29262-1-alice.guo@nxp.com>

Directly reading ocotp register depends on that bootloader enables ocotp
clk, which is not always effective, so change to use nvmem API. Using
nvmem API requires to support driver defer probe and thus change
soc-imx8m.c to use platform driver.

The other reason is that directly reading ocotp register causes kexec
kernel hang because the 1st kernel running will disable unused clks
after kernel boots up, and then ocotp clk will be disabled even if
bootloader enables it. When kexec kernel, ocotp clk needs to be enabled
before reading ocotp registers, and nvmem API with platform driver
supported can accomplish this.

Signed-off-by: Alice Guo <alice.guo@nxp.com>
---

v2: remove the subject prefix "LF-2571-4"
v3: Keep the original way which uses device_initcall to read soc unique
    ID, and add the other way which uses module_platform_driver and
    nvmem API, so that it will not break the old version DTBs.
v4: delete "__maybe_unused"
    delete MODULE_DEVICE_TABLE(of, imx8m_soc_match);
    rename match table, "fsl,imx8mm/n/q/p" is actually a machine
compabile and "fsl,imx8mm/n/q/p-soc" is a compabile of soc@0
    delete "flag" and change to determine whether the pointer is NULL
    ues of_find_matching_node_and_match()
    delete of_match_ptr()
v5: add cleanup part "of_node_put"
    add note to explain that why device_initcall still exists
v6: none

 drivers/soc/imx/soc-imx8m.c | 87 ++++++++++++++++++++++++++++++++-----
 1 file changed, 75 insertions(+), 12 deletions(-)

diff --git a/drivers/soc/imx/soc-imx8m.c b/drivers/soc/imx/soc-imx8m.c
index cc57a384d74d..250530177920 100644
--- a/drivers/soc/imx/soc-imx8m.c
+++ b/drivers/soc/imx/soc-imx8m.c
@@ -5,6 +5,8 @@

 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
 #include <linux/of_address.h>
 #include <linux/slab.h>
 #include <linux/sys_soc.h>
@@ -29,7 +31,7 @@

 struct imx8_soc_data {
 	char *name;
-	u32 (*soc_revision)(void);
+	u32 (*soc_revision)(struct device *dev);
 };

 static u64 soc_uid;
@@ -50,7 +52,7 @@ static u32 imx8mq_soc_revision_from_atf(void)
 static inline u32 imx8mq_soc_revision_from_atf(void) { return 0; };
 #endif

-static u32 __init imx8mq_soc_revision(void)
+static u32 __init imx8mq_soc_revision(struct device *dev)
 {
 	struct device_node *np;
 	void __iomem *ocotp_base;
@@ -75,9 +77,20 @@ static u32 __init imx8mq_soc_revision(void)
 			rev = REV_B1;
 	}

-	soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH);
-	soc_uid <<= 32;
-	soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW);
+	if (dev) {
+		int ret = 0;
+
+		ret = nvmem_cell_read_u64(dev, "soc_unique_id", &soc_uid);
+		if (ret) {
+			iounmap(ocotp_base);
+			of_node_put(np);
+			return ret;
+		}
+	} else {
+		soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH);
+		soc_uid <<= 32;
+		soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW);
+	}

 	iounmap(ocotp_base);
 	of_node_put(np);
@@ -107,7 +120,7 @@ static void __init imx8mm_soc_uid(void)
 	of_node_put(np);
 }

-static u32 __init imx8mm_soc_revision(void)
+static u32 __init imx8mm_soc_revision(struct device *dev)
 {
 	struct device_node *np;
 	void __iomem *anatop_base;
@@ -125,7 +138,15 @@ static u32 __init imx8mm_soc_revision(void)
 	iounmap(anatop_base);
 	of_node_put(np);

-	imx8mm_soc_uid();
+	if (dev) {
+		int ret = 0;
+
+		ret = nvmem_cell_read_u64(dev, "soc_unique_id", &soc_uid);
+		if (ret)
+			return ret;
+	} else {
+		imx8mm_soc_uid();
+	}

 	return rev;
 }
@@ -150,7 +171,7 @@ static const struct imx8_soc_data imx8mp_soc_data = {
 	.soc_revision = imx8mm_soc_revision,
 };

-static __maybe_unused const struct of_device_id imx8_soc_match[] = {
+static const struct of_device_id imx8_machine_match[] = {
 	{ .compatible = "fsl,imx8mq", .data = &imx8mq_soc_data, },
 	{ .compatible = "fsl,imx8mm", .data = &imx8mm_soc_data, },
 	{ .compatible = "fsl,imx8mn", .data = &imx8mn_soc_data, },
@@ -158,12 +179,20 @@ static __maybe_unused const struct of_device_id imx8_soc_match[] = {
 	{ }
 };

+static const struct of_device_id imx8_soc_match[] = {
+	{ .compatible = "fsl,imx8mq-soc", .data = &imx8mq_soc_data, },
+	{ .compatible = "fsl,imx8mm-soc", .data = &imx8mm_soc_data, },
+	{ .compatible = "fsl,imx8mn-soc", .data = &imx8mn_soc_data, },
+	{ .compatible = "fsl,imx8mp-soc", .data = &imx8mp_soc_data, },
+	{ }
+};
+
 #define imx8_revision(soc_rev) \
 	soc_rev ? \
 	kasprintf(GFP_KERNEL, "%d.%d", (soc_rev >> 4) & 0xf,  soc_rev & 0xf) : \
 	"unknown"

-static int __init imx8_soc_init(void)
+static int imx8_soc_info(struct platform_device *pdev)
 {
 	struct soc_device_attribute *soc_dev_attr;
 	struct soc_device *soc_dev;
@@ -182,7 +211,10 @@ static int __init imx8_soc_init(void)
 	if (ret)
 		goto free_soc;

-	id = of_match_node(imx8_soc_match, of_root);
+	if (pdev)
+		id = of_match_node(imx8_soc_match, pdev->dev.of_node);
+	else
+		id = of_match_node(imx8_machine_match, of_root);
 	if (!id) {
 		ret = -ENODEV;
 		goto free_soc;
@@ -191,8 +223,16 @@ static int __init imx8_soc_init(void)
 	data = id->data;
 	if (data) {
 		soc_dev_attr->soc_id = data->name;
-		if (data->soc_revision)
-			soc_rev = data->soc_revision();
+		if (data->soc_revision) {
+			if (pdev) {
+				soc_rev = data->soc_revision(&pdev->dev);
+				ret = soc_rev;
+				if (ret < 0)
+					goto free_soc;
+			} else {
+				soc_rev = data->soc_revision(NULL);
+			}
+		}
 	}

 	soc_dev_attr->revision = imx8_revision(soc_rev);
@@ -230,4 +270,27 @@ static int __init imx8_soc_init(void)
 	kfree(soc_dev_attr);
 	return ret;
 }
+
+/* Retain device_initcall is for backward compatibility with DTS. */
+static int __init imx8_soc_init(void)
+{
+	int ret = 0;
+
+	if (of_find_matching_node_and_match(NULL, imx8_soc_match, NULL))
+		return 0;
+
+	ret = imx8_soc_info(NULL);
+	return ret;
+}
 device_initcall(imx8_soc_init);
+
+static struct platform_driver imx8_soc_info_driver = {
+	.probe = imx8_soc_info,
+	.driver = {
+		.name = "imx8_soc_info",
+		.of_match_table = imx8_soc_match,
+	},
+};
+
+module_platform_driver(imx8_soc_info_driver);
+MODULE_LICENSE("GPL v2");
--
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-11-24  2:01 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-24  1:59 [PATCH v6 1/4] dt-bindings: soc: imx8m: add DT Binding doc for soc unique ID Alice Guo
2020-11-24  1:59 ` [PATCH v6 2/4] arm64: dts: imx8m: add SoC ID compatible Alice Guo
2020-11-24  1:59 ` [PATCH v6 3/4] arm64: dts: imx8m: add NVMEM provider and consumer to read soc unique ID Alice Guo
2020-11-24  9:47   ` Krzysztof Kozlowski
2020-11-24  1:59 ` Alice Guo [this message]
2020-11-24  9:48   ` [PATCH v6 4/4] soc: imx8m: change to use platform driver Krzysztof Kozlowski
2020-11-25  0:44   ` Adam Ford
2020-11-25  7:33     ` Krzysztof Kozlowski
2020-11-26  2:15     ` Alice Guo
2020-11-26  8:07       ` Krzysztof Kozlowski
2020-12-02  1:27   ` kernel test robot
2020-11-24  9:46 ` [PATCH v6 1/4] dt-bindings: soc: imx8m: add DT Binding doc for soc unique ID Krzysztof Kozlowski
2020-11-30 21:57 ` Rob Herring
2020-12-01  3:31   ` Alice Guo (OSS)
2020-12-09  2:30     ` Alice Guo (OSS)
2020-12-09  7:43       ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201124015949.29262-4-alice.guo@nxp.com \
    --to=alice.guo@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peng.fan@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).