[PATCH RESEND v4 13/18] arm64: dts: imx8qm: add conn ss support

[Dong Aisheng <aisheng.dong@nxp.com>]

The CONN SS of MX8QM is mostly the same as MX8QXP except it has one more
USB HSIC module support. So we can fully reuse the exist CONN SS dtsi.
Add <soc>-ss-conn.dtsi with compatible string updated according to
imx8-ss-conn.dtsi.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v2->v3:
 * no changes
v1->v2:
 * change to the new two cell scu clk binding
---
 .../boot/dts/freescale/imx8qm-ss-conn.dtsi    | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
new file mode 100644
index 000000000000..dc47c5c80eae
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2020 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&fec1 {
+	compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+};
+
+&fec2 {
+	compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+};
+
+&usdhc1 {
+	compatible = "fsl,imx8qm-usdhc", "fsl,imx7d-usdhc";
+};
+
+&usdhc2 {
+	compatible = "fsl,imx8qm-usdhc", "fsl,imx7d-usdhc";
+};
-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel