Re: [PATCH v6 3/8] power: supply: max8997_charger: Set CHARGER current limit

[Sebastian Reichel <sebastian.reichel@collabora.com>]

[-- Attachment #1.1: Type: text/plain, Size: 6197 bytes --]

Hi,

On Wed, Dec 30, 2020 at 08:52:15PM +0000, Timon Baetz wrote:
> Register for extcon notification and set charging current depending on
> the detected cable type. Current values are taken from vendor kernel,
> where most charger types end up setting 650mA [0].
> 
> Also enable and disable the CHARGER regulator based on extcon events.
> 
> [0] https://github.com/krzk/linux-vendor-backup/blob/samsung/galaxy-s2-epic-4g-touch-sph-d710-exynos4210-dump/drivers/misc/max8997-muic.c#L1675-L1678
> 
> Signed-off-by: Timon Baetz <timon.baetz@protonmail.com>
> ---

Thanks, queued to power-supply's for-next branch.

-- Sebastian

> v6: dev_info() instead of dev_err().
> v5: Use devm_regulator_get_optional(), dev_err() on failure.
>     dev_err() on extcon_get_edev_by_phandle() failure.
> v4: Make extcon and charger-supply optional.
> v3: Split MFD change.
>     return on regulator_set_current_limit() failure.
> v2: Split DTS changes.
>     Add missing include.
>     Rename charger_data members.
>     Disable regulator on regulator_set_current_limit() failure.
>     Fix ret declaration.
>     Remove unneeded variables.
>     Don't dev_err() on deferral.
>     Get regulator and extcon from DTS.
>     Use devm_regulator_get(). 
>     Fix indentation.
> 
>  drivers/power/supply/max8997_charger.c | 96 ++++++++++++++++++++++++++
>  1 file changed, 96 insertions(+)
> 
> diff --git a/drivers/power/supply/max8997_charger.c b/drivers/power/supply/max8997_charger.c
> index 1947af25879a..23df91ed2c72 100644
> --- a/drivers/power/supply/max8997_charger.c
> +++ b/drivers/power/supply/max8997_charger.c
> @@ -6,12 +6,14 @@
>  //  MyungJoo Ham <myungjoo.ham@samsung.com>
>  
>  #include <linux/err.h>
> +#include <linux/extcon.h>
>  #include <linux/module.h>
>  #include <linux/slab.h>
>  #include <linux/platform_device.h>
>  #include <linux/power_supply.h>
>  #include <linux/mfd/max8997.h>
>  #include <linux/mfd/max8997-private.h>
> +#include <linux/regulator/consumer.h>
>  
>  /* MAX8997_REG_STATUS4 */
>  #define DCINOK_SHIFT		1
> @@ -31,6 +33,10 @@ struct charger_data {
>  	struct device *dev;
>  	struct max8997_dev *iodev;
>  	struct power_supply *battery;
> +	struct regulator *reg;
> +	struct extcon_dev *edev;
> +	struct notifier_block extcon_nb;
> +	struct work_struct extcon_work;
>  };
>  
>  static enum power_supply_property max8997_battery_props[] = {
> @@ -88,6 +94,67 @@ static int max8997_battery_get_property(struct power_supply *psy,
>  	return 0;
>  }
>  
> +static void max8997_battery_extcon_evt_stop_work(void *data)
> +{
> +	struct charger_data *charger = data;
> +
> +	cancel_work_sync(&charger->extcon_work);
> +}
> +
> +static void max8997_battery_extcon_evt_worker(struct work_struct *work)
> +{
> +	struct charger_data *charger =
> +	    container_of(work, struct charger_data, extcon_work);
> +	struct extcon_dev *edev = charger->edev;
> +	int current_limit;
> +
> +	if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) {
> +		dev_dbg(charger->dev, "USB SDP charger is connected\n");
> +		current_limit = 450000;
> +	} else if (extcon_get_state(edev, EXTCON_CHG_USB_DCP) > 0) {
> +		dev_dbg(charger->dev, "USB DCP charger is connected\n");
> +		current_limit = 650000;
> +	} else if (extcon_get_state(edev, EXTCON_CHG_USB_FAST) > 0) {
> +		dev_dbg(charger->dev, "USB FAST charger is connected\n");
> +		current_limit = 650000;
> +	} else if (extcon_get_state(edev, EXTCON_CHG_USB_SLOW) > 0) {
> +		dev_dbg(charger->dev, "USB SLOW charger is connected\n");
> +		current_limit = 650000;
> +	} else if (extcon_get_state(edev, EXTCON_CHG_USB_CDP) > 0) {
> +		dev_dbg(charger->dev, "USB CDP charger is connected\n");
> +		current_limit = 650000;
> +	} else {
> +		dev_dbg(charger->dev, "USB charger is diconnected\n");
> +		current_limit = -1;
> +	}
> +
> +	if (current_limit > 0) {
> +		int ret = regulator_set_current_limit(charger->reg, current_limit, current_limit);
> +
> +		if (ret) {
> +			dev_err(charger->dev, "failed to set current limit: %d\n", ret);
> +			return;
> +		}
> +		ret = regulator_enable(charger->reg);
> +		if (ret)
> +			dev_err(charger->dev, "failed to enable regulator: %d\n", ret);
> +	} else {
> +		int ret  = regulator_disable(charger->reg);
> +
> +		if (ret)
> +			dev_err(charger->dev, "failed to disable regulator: %d\n", ret);
> +	}
> +}
> +
> +static int max8997_battery_extcon_evt(struct notifier_block *nb,
> +				unsigned long event, void *param)
> +{
> +	struct charger_data *charger =
> +		container_of(nb, struct charger_data, extcon_nb);
> +	schedule_work(&charger->extcon_work);
> +	return NOTIFY_OK;
> +}
> +
>  static const struct power_supply_desc max8997_battery_desc = {
>  	.name		= "max8997_pmic",
>  	.type		= POWER_SUPPLY_TYPE_BATTERY,
> @@ -170,6 +237,35 @@ static int max8997_battery_probe(struct platform_device *pdev)
>  		return PTR_ERR(charger->battery);
>  	}
>  
> +	charger->reg = devm_regulator_get_optional(&pdev->dev, "charger");
> +	if (IS_ERR(charger->reg)) {
> +		if (PTR_ERR(charger->reg) == -EPROBE_DEFER)
> +			return -EPROBE_DEFER;
> +		dev_info(&pdev->dev, "couldn't get charger regulator\n");
> +	}
> +	charger->edev = extcon_get_edev_by_phandle(&pdev->dev, 0);
> +	if (IS_ERR(charger->edev)) {
> +		if (PTR_ERR(charger->edev) == -EPROBE_DEFER)
> +			return -EPROBE_DEFER;
> +		dev_info(charger->dev, "couldn't get extcon device\n");
> +	}
> +
> +	if (!IS_ERR(charger->reg) && !IS_ERR(charger->edev)) {
> +		INIT_WORK(&charger->extcon_work, max8997_battery_extcon_evt_worker);
> +		ret = devm_add_action(&pdev->dev, max8997_battery_extcon_evt_stop_work, charger);
> +		if (ret) {
> +			dev_err(&pdev->dev, "failed to add extcon evt stop action: %d\n", ret);
> +			return ret;
> +		}
> +		charger->extcon_nb.notifier_call = max8997_battery_extcon_evt;
> +		ret = devm_extcon_register_notifier_all(&pdev->dev, charger->edev,
> +							&charger->extcon_nb);
> +		if (ret) {
> +			dev_err(&pdev->dev, "failed to register extcon notifier\n");
> +			return ret;
> +		};
> +	}
> +
>  	return 0;
>  }
>  
> -- 
> 2.25.1
> 
> 

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel