linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v6 0/3] Add support for Boundary Nitrogen8M Mini SBC
@ 2021-01-28 19:35 Adrien Grassein
  2021-01-28 19:35 ` [PATCH v6 1/3] dt-bindings: arm: imx: add imx8mm nitrogen support Adrien Grassein
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Adrien Grassein @ 2021-01-28 19:35 UTC (permalink / raw)
  Cc: devicetree, will, catalin.marinas, s.hauer, m.felsch, krzk,
	linux-kernel, robh+dt, linux-imx, kernel, shawnguo,
	linux-arm-kernel, Adrien Grassein

Hello,

This patch set aims is to add the support of the Nitrogen8M Mini SBC
from Boundary Devices.

Thanks,

Update in v2:
  - Rewrite the dts (Remove the unused wlan and audio);
  - Remove useless definition;
  - Take in account review.

Update in v3:
  - Take in account review.

Update in v4:
  - Reorder definition in pmic

Update in v5:
  - Take in account review.
  - Remove useless i2c groups

Update in v6:
  - Rename dts file to follow the existing;
  - Take in account reviews.

Adrien Grassein (3):
  dt-bindings: arm: imx: add imx8mm nitrogen support
  arm64: dts: imx: Add i.mx8mm nitrogen basic dts support
  arm64: defconfig: Enable PF8x00 as builtin

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8mm-nitrogen-r2.dts | 393 ++++++++++++++++++
 arch/arm64/configs/defconfig                  |   1 +
 4 files changed, 396 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts

-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [PATCH v6 1/3] dt-bindings: arm: imx: add imx8mm nitrogen support
  2021-01-28 19:35 [PATCH v6 0/3] Add support for Boundary Nitrogen8M Mini SBC Adrien Grassein
@ 2021-01-28 19:35 ` Adrien Grassein
  2021-01-30 14:33   ` Shawn Guo
  2021-01-28 19:35 ` [PATCH v6 2/3] arm64: dts: imx: Add i.mx8mm nitrogen basic dts support Adrien Grassein
  2021-01-28 19:35 ` [PATCH v6 3/3] arm64: defconfig: Enable PF8x00 as builtin Adrien Grassein
  2 siblings, 1 reply; 6+ messages in thread
From: Adrien Grassein @ 2021-01-28 19:35 UTC (permalink / raw)
  Cc: devicetree, will, catalin.marinas, s.hauer, m.felsch, krzk,
	linux-kernel, robh+dt, linux-imx, kernel, shawnguo,
	linux-arm-kernel, Adrien Grassein

The Nitrogen8M Mini is an ARM based single board computer (SBC).

Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 65038b16302e..b46a285eb702 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -678,6 +678,7 @@ properties:
         items:
           - enum:
               - beacon,imx8mm-beacon-kit  # i.MX8MM Beacon Development Kit
+              - boundary,imx8mm-nitrogen8mm  # i.MX8MM Nitrogen Board
               - fsl,imx8mm-ddr4-evk       # i.MX8MM DDR4 EVK Board
               - fsl,imx8mm-evk            # i.MX8MM EVK Board
               - gw,imx8mm-gw71xx-0x       # i.MX8MM Gateworks Development Kit
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH v6 2/3] arm64: dts: imx: Add i.mx8mm nitrogen basic dts support
  2021-01-28 19:35 [PATCH v6 0/3] Add support for Boundary Nitrogen8M Mini SBC Adrien Grassein
  2021-01-28 19:35 ` [PATCH v6 1/3] dt-bindings: arm: imx: add imx8mm nitrogen support Adrien Grassein
@ 2021-01-28 19:35 ` Adrien Grassein
  2021-01-28 19:35 ` [PATCH v6 3/3] arm64: defconfig: Enable PF8x00 as builtin Adrien Grassein
  2 siblings, 0 replies; 6+ messages in thread
From: Adrien Grassein @ 2021-01-28 19:35 UTC (permalink / raw)
  Cc: devicetree, will, catalin.marinas, s.hauer, m.felsch, krzk,
	linux-kernel, robh+dt, linux-imx, kernel, shawnguo,
	linux-arm-kernel, Adrien Grassein

Tested with a basic Build Root configuration booting from sdcard.

Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8mm-nitrogen-r2.dts | 393 ++++++++++++++++++
 2 files changed, 394 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 17fc731da700..301ddbf4577f 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -34,6 +34,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
new file mode 100644
index 000000000000..c0c384d76147
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Boundary Devices i.MX8MMini Nitrogen8MM Rev2 board.
+ * Adrien Grassein <adrien.grassein@gmail.com.com>
+ */
+/dts-v1/;
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX8MMini Nitrogen8MM Rev2";
+	compatible = "boundary,imx8mm-nitrogen8mm", "fsl,imx8mm";
+};
+
+&A53_0 {
+	cpu-supply = <&reg_buck3>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_buck3>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_buck3>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_buck3>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			interrupts-extended = <&gpio3 16 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "nxp,pf8121a";
+		reg = <0x8>;
+
+		regulators {
+			reg_ldo1: ldo1 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_ldo2: ldo2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_ldo3: ldo3 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_ldo4: ldo4 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck1: buck1 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck2: buck2 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck3: buck3 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck4: buck4 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck5: buck5 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck6: buck6 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck7: buck7 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vsnvs: vsnvs {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	i2cmux@70 {
+		compatible = "nxp,pca9540";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c3 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rtc@68 {
+				compatible = "microcrystal,rv4162";
+				reg = <0x68>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c3a_rv4162>;
+				interrupts-extended = <&gpio4 22 IRQ_TYPE_LEVEL_LOW>;
+				wakeup-source;
+			};
+		};
+	};
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_CLK_24M>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc1 {
+	bus-width = <8>;
+	sdhci-caps-mask = <0x80000000 0x0>;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	status = "okay";
+};
+
+/* sdcard */
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vqmmc-supply = <&reg_ldo2>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16		0x159
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x09
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x09
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3a_rv4162: i2c3a-rv4162grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1c0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d0
+			MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10	0x141
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x03
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x140
+		>;
+	};
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH v6 3/3] arm64: defconfig: Enable PF8x00 as builtin
  2021-01-28 19:35 [PATCH v6 0/3] Add support for Boundary Nitrogen8M Mini SBC Adrien Grassein
  2021-01-28 19:35 ` [PATCH v6 1/3] dt-bindings: arm: imx: add imx8mm nitrogen support Adrien Grassein
  2021-01-28 19:35 ` [PATCH v6 2/3] arm64: dts: imx: Add i.mx8mm nitrogen basic dts support Adrien Grassein
@ 2021-01-28 19:35 ` Adrien Grassein
  2021-01-29 21:18   ` Krzysztof Kozlowski
  2 siblings, 1 reply; 6+ messages in thread
From: Adrien Grassein @ 2021-01-28 19:35 UTC (permalink / raw)
  Cc: devicetree, will, catalin.marinas, s.hauer, m.felsch, krzk,
	linux-kernel, robh+dt, linux-imx, kernel, shawnguo,
	linux-arm-kernel, Adrien Grassein

This driver is mandatory for the nitrogen8m mini board
when booting from the sdcard slot.

Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index ec377f70d3ce..9f10418cf8a0 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -609,6 +609,7 @@ CONFIG_REGULATOR_MAX77620=y
 CONFIG_REGULATOR_MAX8973=y
 CONFIG_REGULATOR_MP8859=y
 CONFIG_REGULATOR_PCA9450=y
+CONFIG_REGULATOR_PF8X00=y
 CONFIG_REGULATOR_PFUZE100=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_REGULATOR_QCOM_RPMH=y
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* Re: [PATCH v6 3/3] arm64: defconfig: Enable PF8x00 as builtin
  2021-01-28 19:35 ` [PATCH v6 3/3] arm64: defconfig: Enable PF8x00 as builtin Adrien Grassein
@ 2021-01-29 21:18   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2021-01-29 21:18 UTC (permalink / raw)
  To: Adrien Grassein
  Cc: devicetree, will, catalin.marinas, s.hauer, m.felsch,
	linux-kernel, robh+dt, linux-imx, kernel, shawnguo,
	linux-arm-kernel

On Thu, Jan 28, 2021 at 08:35:54PM +0100, Adrien Grassein wrote:
> This driver is mandatory for the nitrogen8m mini board
> when booting from the sdcard slot.
> 
> Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
> ---
>  arch/arm64/configs/defconfig | 1 +
>  1 file changed, 1 insertion(+)

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: [PATCH v6 1/3] dt-bindings: arm: imx: add imx8mm nitrogen support
  2021-01-28 19:35 ` [PATCH v6 1/3] dt-bindings: arm: imx: add imx8mm nitrogen support Adrien Grassein
@ 2021-01-30 14:33   ` Shawn Guo
  0 siblings, 0 replies; 6+ messages in thread
From: Shawn Guo @ 2021-01-30 14:33 UTC (permalink / raw)
  To: Adrien Grassein
  Cc: devicetree, catalin.marinas, s.hauer, m.felsch, krzk,
	linux-kernel, robh+dt, linux-imx, kernel, will, linux-arm-kernel

On Thu, Jan 28, 2021 at 08:35:52PM +0100, Adrien Grassein wrote:
> The Nitrogen8M Mini is an ARM based single board computer (SBC).
> 
> Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Applied all 3, thanks.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-01-30 14:35 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-28 19:35 [PATCH v6 0/3] Add support for Boundary Nitrogen8M Mini SBC Adrien Grassein
2021-01-28 19:35 ` [PATCH v6 1/3] dt-bindings: arm: imx: add imx8mm nitrogen support Adrien Grassein
2021-01-30 14:33   ` Shawn Guo
2021-01-28 19:35 ` [PATCH v6 2/3] arm64: dts: imx: Add i.mx8mm nitrogen basic dts support Adrien Grassein
2021-01-28 19:35 ` [PATCH v6 3/3] arm64: defconfig: Enable PF8x00 as builtin Adrien Grassein
2021-01-29 21:18   ` Krzysztof Kozlowski

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).