From: Cristian Marussi <cristian.marussi@arm.com>
To: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: f.fainelli@gmail.com, vincent.guittot@linaro.org,
sudeep.holla@arm.com, thara.gopinath@linaro.org,
cristian.marussi@arm.com, james.quinlan@broadcom.com,
Jonathan.Cameron@Huawei.com, souvik.chakravarty@arm.com,
etienne.carriere@linaro.org, lukasz.luba@arm.com
Subject: [PATCH v6 28/37] firmware: arm_scmi: port Voltage protocol to new protocols interface
Date: Tue, 2 Feb 2021 22:15:46 +0000 [thread overview]
Message-ID: <20210202221555.41167-29-cristian.marussi@arm.com> (raw)
In-Reply-To: <20210202221555.41167-1-cristian.marussi@arm.com>
Convert internals of protocol implementation to use protocol handles and
expose a new protocol operations interface for SCMI driver using the new
get/put common operations, while keeping the old handle->voltage_ops still
around to ease transition.
Remove handle->voltage_priv now unused.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
---
drivers/firmware/arm_scmi/voltage.c | 179 ++++++++++++++++++----------
include/linux/scmi_protocol.h | 24 ++--
2 files changed, 136 insertions(+), 67 deletions(-)
diff --git a/drivers/firmware/arm_scmi/voltage.c b/drivers/firmware/arm_scmi/voltage.c
index 8145ee79bb19..7b390426028e 100644
--- a/drivers/firmware/arm_scmi/voltage.c
+++ b/drivers/firmware/arm_scmi/voltage.c
@@ -59,23 +59,23 @@ struct voltage_info {
struct scmi_voltage_info *domains;
};
-static int scmi_protocol_attributes_get(const struct scmi_handle *handle,
+static int scmi_protocol_attributes_get(const struct scmi_protocol_handle *ph,
struct voltage_info *vinfo)
{
int ret;
struct scmi_xfer *t;
- ret = scmi_xfer_get_init(handle, PROTOCOL_ATTRIBUTES,
- SCMI_PROTOCOL_VOLTAGE, 0, sizeof(__le32), &t);
+ ret = ph->xops->xfer_get_init(ph, PROTOCOL_ATTRIBUTES, 0,
+ sizeof(__le32), &t);
if (ret)
return ret;
- ret = scmi_do_xfer(handle, t);
+ ret = ph->xops->do_xfer(ph, t);
if (!ret)
vinfo->num_domains =
NUM_VOLTAGE_DOMAINS(get_unaligned_le32(t->rx.buf));
- scmi_xfer_put(handle, t);
+ ph->xops->xfer_put(ph, t);
return ret;
}
@@ -109,24 +109,23 @@ static int scmi_init_voltage_levels(struct device *dev,
return 0;
}
-static int scmi_voltage_descriptors_get(const struct scmi_handle *handle,
+static int scmi_voltage_descriptors_get(const struct scmi_protocol_handle *ph,
struct voltage_info *vinfo)
{
int ret, dom;
struct scmi_xfer *td, *tl;
- struct device *dev = handle->dev;
+ struct device *dev = ph->dev;
struct scmi_msg_resp_domain_attributes *resp_dom;
struct scmi_msg_resp_describe_levels *resp_levels;
- ret = scmi_xfer_get_init(handle, VOLTAGE_DOMAIN_ATTRIBUTES,
- SCMI_PROTOCOL_VOLTAGE, sizeof(__le32),
- sizeof(*resp_dom), &td);
+ ret = ph->xops->xfer_get_init(ph, VOLTAGE_DOMAIN_ATTRIBUTES,
+ sizeof(__le32), sizeof(*resp_dom), &td);
if (ret)
return ret;
resp_dom = td->rx.buf;
- ret = scmi_xfer_get_init(handle, VOLTAGE_DESCRIBE_LEVELS,
- SCMI_PROTOCOL_VOLTAGE, sizeof(__le64), 0, &tl);
+ ret = ph->xops->xfer_get_init(ph, VOLTAGE_DESCRIBE_LEVELS,
+ sizeof(__le64), 0, &tl);
if (ret)
goto outd;
resp_levels = tl->rx.buf;
@@ -139,7 +138,7 @@ static int scmi_voltage_descriptors_get(const struct scmi_handle *handle,
/* Retrieve domain attributes at first ... */
put_unaligned_le32(dom, td->tx.buf);
- ret = scmi_do_xfer(handle, td);
+ ret = ph->xops->do_xfer(ph, td);
/* Skip domain on comms error */
if (ret)
continue;
@@ -157,7 +156,7 @@ static int scmi_voltage_descriptors_get(const struct scmi_handle *handle,
cmd->domain_id = cpu_to_le32(v->id);
cmd->level_index = desc_index;
- ret = scmi_do_xfer(handle, tl);
+ ret = ph->xops->do_xfer(ph, tl);
if (ret)
break;
@@ -176,7 +175,7 @@ static int scmi_voltage_descriptors_get(const struct scmi_handle *handle,
}
if (desc_index + num_returned > v->num_levels) {
- dev_err(handle->dev,
+ dev_err(ph->dev,
"No. of voltage levels can't exceed %d\n",
v->num_levels);
ret = -EINVAL;
@@ -195,7 +194,7 @@ static int scmi_voltage_descriptors_get(const struct scmi_handle *handle,
desc_index += num_returned;
- scmi_reset_rx_to_maxsz(handle, tl);
+ ph->xops->reset_rx_to_maxsz(ph, tl);
/* check both to avoid infinite loop due to buggy fw */
} while (num_returned && num_remaining);
@@ -204,55 +203,52 @@ static int scmi_voltage_descriptors_get(const struct scmi_handle *handle,
devm_kfree(dev, v->levels_uv);
}
- scmi_reset_rx_to_maxsz(handle, td);
+ ph->xops->reset_rx_to_maxsz(ph, td);
}
- scmi_xfer_put(handle, tl);
+ ph->xops->xfer_put(ph, tl);
outd:
- scmi_xfer_put(handle, td);
+ ph->xops->xfer_put(ph, td);
return ret;
}
-static int __scmi_voltage_get_u32(const struct scmi_handle *handle,
+static int __scmi_voltage_get_u32(const struct scmi_protocol_handle *ph,
u8 cmd_id, u32 domain_id, u32 *value)
{
int ret;
struct scmi_xfer *t;
- struct voltage_info *vinfo = handle->voltage_priv;
+ struct voltage_info *vinfo = ph->get_priv(ph);
if (domain_id >= vinfo->num_domains)
return -EINVAL;
- ret = scmi_xfer_get_init(handle, cmd_id,
- SCMI_PROTOCOL_VOLTAGE,
- sizeof(__le32), 0, &t);
+ ret = ph->xops->xfer_get_init(ph, cmd_id, sizeof(__le32), 0, &t);
if (ret)
return ret;
put_unaligned_le32(domain_id, t->tx.buf);
- ret = scmi_do_xfer(handle, t);
+ ret = ph->xops->do_xfer(ph, t);
if (!ret)
*value = get_unaligned_le32(t->rx.buf);
- scmi_xfer_put(handle, t);
+ ph->xops->xfer_put(ph, t);
return ret;
}
-static int scmi_voltage_config_set(const struct scmi_handle *handle,
+static int scmi_voltage_config_set(const struct scmi_protocol_handle *ph,
u32 domain_id, u32 config)
{
int ret;
struct scmi_xfer *t;
- struct voltage_info *vinfo = handle->voltage_priv;
+ struct voltage_info *vinfo = ph->get_priv(ph);
struct scmi_msg_cmd_config_set *cmd;
if (domain_id >= vinfo->num_domains)
return -EINVAL;
- ret = scmi_xfer_get_init(handle, VOLTAGE_CONFIG_SET,
- SCMI_PROTOCOL_VOLTAGE,
- sizeof(*cmd), 0, &t);
+ ret = ph->xops->xfer_get_init(ph, VOLTAGE_CONFIG_SET,
+ sizeof(*cmd), 0, &t);
if (ret)
return ret;
@@ -260,33 +256,50 @@ static int scmi_voltage_config_set(const struct scmi_handle *handle,
cmd->domain_id = cpu_to_le32(domain_id);
cmd->config = cpu_to_le32(config & GENMASK(3, 0));
- ret = scmi_do_xfer(handle, t);
+ ret = ph->xops->do_xfer(ph, t);
- scmi_xfer_put(handle, t);
+ ph->xops->xfer_put(ph, t);
return ret;
}
-static int scmi_voltage_config_get(const struct scmi_handle *handle,
+static int __scmi_voltage_config_set(const struct scmi_handle *handle,
+ u32 domain_id, u32 config)
+{
+ const struct scmi_protocol_handle *ph =
+ scmi_map_protocol_handle(handle, SCMI_PROTOCOL_VOLTAGE);
+
+ return scmi_voltage_config_set(ph, domain_id, config);
+}
+
+static int scmi_voltage_config_get(const struct scmi_protocol_handle *ph,
u32 domain_id, u32 *config)
{
- return __scmi_voltage_get_u32(handle, VOLTAGE_CONFIG_GET,
+ return __scmi_voltage_get_u32(ph, VOLTAGE_CONFIG_GET,
domain_id, config);
}
-static int scmi_voltage_level_set(const struct scmi_handle *handle,
+static int __scmi_voltage_config_get(const struct scmi_handle *handle,
+ u32 domain_id, u32 *config)
+{
+ const struct scmi_protocol_handle *ph =
+ scmi_map_protocol_handle(handle, SCMI_PROTOCOL_VOLTAGE);
+
+ return scmi_voltage_config_get(ph, domain_id, config);
+}
+
+static int scmi_voltage_level_set(const struct scmi_protocol_handle *ph,
u32 domain_id, u32 flags, s32 volt_uV)
{
int ret;
struct scmi_xfer *t;
- struct voltage_info *vinfo = handle->voltage_priv;
+ struct voltage_info *vinfo = ph->get_priv(ph);
struct scmi_msg_cmd_level_set *cmd;
if (domain_id >= vinfo->num_domains)
return -EINVAL;
- ret = scmi_xfer_get_init(handle, VOLTAGE_LEVEL_SET,
- SCMI_PROTOCOL_VOLTAGE,
- sizeof(*cmd), 0, &t);
+ ret = ph->xops->xfer_get_init(ph, VOLTAGE_LEVEL_SET,
+ sizeof(*cmd), 0, &t);
if (ret)
return ret;
@@ -295,23 +308,41 @@ static int scmi_voltage_level_set(const struct scmi_handle *handle,
cmd->flags = cpu_to_le32(flags);
cmd->voltage_level = cpu_to_le32(volt_uV);
- ret = scmi_do_xfer(handle, t);
+ ret = ph->xops->do_xfer(ph, t);
- scmi_xfer_put(handle, t);
+ ph->xops->xfer_put(ph, t);
return ret;
}
-static int scmi_voltage_level_get(const struct scmi_handle *handle,
+static int __scmi_voltage_level_set(const struct scmi_handle *handle,
+ u32 domain_id, u32 flags, s32 volt_uV)
+{
+ const struct scmi_protocol_handle *ph =
+ scmi_map_protocol_handle(handle, SCMI_PROTOCOL_VOLTAGE);
+
+ return scmi_voltage_level_set(ph, domain_id, flags, volt_uV);
+}
+
+static int scmi_voltage_level_get(const struct scmi_protocol_handle *ph,
u32 domain_id, s32 *volt_uV)
{
- return __scmi_voltage_get_u32(handle, VOLTAGE_LEVEL_GET,
+ return __scmi_voltage_get_u32(ph, VOLTAGE_LEVEL_GET,
domain_id, (u32 *)volt_uV);
}
+static int __scmi_voltage_level_get(const struct scmi_handle *handle,
+ u32 domain_id, s32 *volt_uV)
+{
+ const struct scmi_protocol_handle *ph =
+ scmi_map_protocol_handle(handle, SCMI_PROTOCOL_VOLTAGE);
+
+ return scmi_voltage_level_get(ph, domain_id, volt_uV);
+}
+
static const struct scmi_voltage_info * __must_check
-scmi_voltage_info_get(const struct scmi_handle *handle, u32 domain_id)
+scmi_voltage_info_get(const struct scmi_protocol_handle *ph, u32 domain_id)
{
- struct voltage_info *vinfo = handle->voltage_priv;
+ struct voltage_info *vinfo = ph->get_priv(ph);
if (domain_id >= vinfo->num_domains ||
!vinfo->domains[domain_id].num_levels)
@@ -320,14 +351,40 @@ scmi_voltage_info_get(const struct scmi_handle *handle, u32 domain_id)
return vinfo->domains + domain_id;
}
-static int scmi_voltage_domains_num_get(const struct scmi_handle *handle)
+static const struct scmi_voltage_info * __must_check
+__scmi_voltage_info_get(const struct scmi_handle *handle, u32 domain_id)
+{
+ const struct scmi_protocol_handle *ph =
+ scmi_map_protocol_handle(handle, SCMI_PROTOCOL_VOLTAGE);
+
+ return scmi_voltage_info_get(ph, domain_id);
+}
+
+static int scmi_voltage_domains_num_get(const struct scmi_protocol_handle *ph)
{
- struct voltage_info *vinfo = handle->voltage_priv;
+ struct voltage_info *vinfo = ph->get_priv(ph);
return vinfo->num_domains;
}
+static int __scmi_voltage_domains_num_get(const struct scmi_handle *handle)
+{
+ const struct scmi_protocol_handle *ph =
+ scmi_map_protocol_handle(handle, SCMI_PROTOCOL_VOLTAGE);
+
+ return scmi_voltage_domains_num_get(ph);
+}
+
static struct scmi_voltage_ops voltage_ops = {
+ .num_domains_get = __scmi_voltage_domains_num_get,
+ .info_get = __scmi_voltage_info_get,
+ .config_set = __scmi_voltage_config_set,
+ .config_get = __scmi_voltage_config_get,
+ .level_set = __scmi_voltage_level_set,
+ .level_get = __scmi_voltage_level_get,
+};
+
+static struct scmi_voltage_proto_ops voltage_proto_ops = {
.num_domains_get = scmi_voltage_domains_num_get,
.info_get = scmi_voltage_info_get,
.config_set = scmi_voltage_config_set,
@@ -336,51 +393,53 @@ static struct scmi_voltage_ops voltage_ops = {
.level_get = scmi_voltage_level_get,
};
-static int scmi_voltage_protocol_init(struct scmi_handle *handle)
+static int scmi_voltage_protocol_init(const struct scmi_protocol_handle *ph)
{
int ret;
u32 version;
struct voltage_info *vinfo;
+ struct scmi_handle *handle;
- ret = scmi_version_get(handle, SCMI_PROTOCOL_VOLTAGE, &version);
+ ret = ph->xops->version_get(ph, &version);
if (ret)
return ret;
- dev_dbg(handle->dev, "Voltage Version %d.%d\n",
+ dev_dbg(ph->dev, "Voltage Version %d.%d\n",
PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
- vinfo = devm_kzalloc(handle->dev, sizeof(*vinfo), GFP_KERNEL);
+ vinfo = devm_kzalloc(ph->dev, sizeof(*vinfo), GFP_KERNEL);
if (!vinfo)
return -ENOMEM;
vinfo->version = version;
- ret = scmi_protocol_attributes_get(handle, vinfo);
+ ret = scmi_protocol_attributes_get(ph, vinfo);
if (ret)
return ret;
if (vinfo->num_domains) {
- vinfo->domains = devm_kcalloc(handle->dev, vinfo->num_domains,
+ vinfo->domains = devm_kcalloc(ph->dev, vinfo->num_domains,
sizeof(*vinfo->domains),
GFP_KERNEL);
if (!vinfo->domains)
return -ENOMEM;
- ret = scmi_voltage_descriptors_get(handle, vinfo);
+ ret = scmi_voltage_descriptors_get(ph, vinfo);
if (ret)
return ret;
} else {
- dev_warn(handle->dev, "No Voltage domains found.\n");
+ dev_warn(ph->dev, "No Voltage domains found.\n");
}
+ /* Transient code for legacy ops interface */
+ handle = scmi_map_scmi_handle(ph);
handle->voltage_ops = &voltage_ops;
- handle->voltage_priv = vinfo;
- return 0;
+ return ph->set_priv(ph, vinfo);
}
static const struct scmi_protocol scmi_voltage = {
.id = SCMI_PROTOCOL_VOLTAGE,
- .init = &scmi_voltage_protocol_init,
- .ops = &voltage_ops,
+ .init_instance = &scmi_voltage_protocol_init,
+ .ops = &voltage_proto_ops,
};
DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(voltage, scmi_voltage)
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 22713cff3a5e..0fc4884656f1 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -515,7 +515,7 @@ struct scmi_voltage_info {
};
/**
- * struct scmi_voltage_ops - represents the various operations provided
+ * struct scmi_voltage_proto_ops - represents the various operations provided
* by SCMI Voltage Protocol
*
* @num_domains_get: get the count of voltage domains provided by SCMI
@@ -525,14 +525,28 @@ struct scmi_voltage_info {
* @level_set: set the voltage level for the specified domain
* @level_get: get the voltage level of the specified domain
*/
+struct scmi_voltage_proto_ops {
+ int (*num_domains_get)(const struct scmi_protocol_handle *ph);
+ const struct scmi_voltage_info __must_check *(*info_get)
+ (const struct scmi_protocol_handle *ph, u32 domain_id);
+ int (*config_set)(const struct scmi_protocol_handle *ph, u32 domain_id,
+ u32 config);
+#define SCMI_VOLTAGE_ARCH_STATE_OFF 0x0
+#define SCMI_VOLTAGE_ARCH_STATE_ON 0x7
+ int (*config_get)(const struct scmi_protocol_handle *ph, u32 domain_id,
+ u32 *config);
+ int (*level_set)(const struct scmi_protocol_handle *ph, u32 domain_id,
+ u32 flags, s32 volt_uV);
+ int (*level_get)(const struct scmi_protocol_handle *ph, u32 domain_id,
+ s32 *volt_uV);
+};
+
struct scmi_voltage_ops {
int (*num_domains_get)(const struct scmi_handle *handle);
const struct scmi_voltage_info __must_check *(*info_get)
(const struct scmi_handle *handle, u32 domain_id);
int (*config_set)(const struct scmi_handle *handle, u32 domain_id,
u32 config);
-#define SCMI_VOLTAGE_ARCH_STATE_OFF 0x0
-#define SCMI_VOLTAGE_ARCH_STATE_ON 0x7
int (*config_get)(const struct scmi_handle *handle, u32 domain_id,
u32 *config);
int (*level_set)(const struct scmi_handle *handle, u32 domain_id,
@@ -613,8 +627,6 @@ struct scmi_notify_ops {
* @devm_put_protocol: devres managed method to release a protocol acquired
* with devm_acquire/get_protocol
* @notify_ops: pointer to set of notifications related operations
- * @voltage_priv: pointer to private data structure specific to voltage
- * protocol(for internal use only)
* @notify_priv: pointer to private data structure specific to notifications
* (for internal use only)
*/
@@ -631,8 +643,6 @@ struct scmi_handle {
void (*devm_put_protocol)(struct scmi_device *sdev, u8 proto);
const struct scmi_notify_ops *notify_ops;
- /* for protocol internal use */
- void *voltage_priv;
void *notify_priv;
};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-02-02 22:27 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-02 22:15 [PATCH v6 0/37] SCMI vendor protocols and modularization Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 01/37] firmware: arm_scmi: review protocol registration interface Cristian Marussi
2021-03-08 4:38 ` Sudeep Holla
2021-03-08 11:24 ` Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 02/37] firmware: arm_scmi: introduce protocol handle definitions Cristian Marussi
2021-03-08 5:50 ` Sudeep Holla
2021-03-08 11:37 ` Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 03/37] firmware: arm_scmi: introduce devres get/put protocols operations Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 04/37] firmware: arm_scmi: add devm_acquire_protocol helper Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 05/37] firmware: arm_scmi: make notifications aware of protocols users Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 06/37] firmware: arm_scmi: introduce new devres notification ops Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 07/37] firmware: arm_scmi: refactor events registration Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 08/37] firmware: arm_scmi: convert events registration to protocol handles Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 09/37] firmware: arm_scmi: add new protocol handle core xfer ops Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 10/37] firmware: arm_scmi: add helper to access revision area memory Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 11/37] firmware: arm_scmi: port Base protocol to new interface Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 12/37] firmware: arm_scmi: port Perf protocol to new protocols interface Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 13/37] cpufreq: scmi: port driver to the new scmi_perf_proto_ops interface Cristian Marussi
2021-02-03 3:03 ` Viresh Kumar
2021-02-03 12:10 ` Cristian Marussi
2021-02-04 11:43 ` Sudeep Holla
2021-02-04 2:14 ` Viresh Kumar
2021-02-02 22:15 ` [PATCH v6 14/37] firmware: arm_scmi: remove legacy scmi_perf_ops protocol interface Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 15/37] firmware: arm_scmi: port Power protocol to new protocols interface Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 16/37] firmware: arm_scmi: port GenPD driver to the new scmi_power_proto_ops interface Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 17/37] firmware: arm_scmi: remove legacy scmi_power_ops protocol interface Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 18/37] firmware: arm_scmi: port Clock protocol to new protocols interface Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 19/37] clk: scmi: port driver to the new scmi_clk_proto_ops interface Cristian Marussi
2021-03-10 14:19 ` Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 20/37] firmware: arm_scmi: remove legacy scmi_clk_ops protocol interface Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 21/37] firmware: arm_scmi: port Reset protocol to new protocols interface Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 22/37] reset: reset-scmi: port driver to the new scmi_reset_proto_ops interface Cristian Marussi
2021-03-03 14:46 ` Philipp Zabel
2021-02-02 22:15 ` [PATCH v6 23/37] firmware: arm_scmi: remove legacy scmi_reset_ops protocol interface Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 24/37] firmware: arm_scmi: port Sensor protocol to new protocols interface Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 25/37] hwmon: (scmi) port driver to the new scmi_sensor_proto_ops interface Cristian Marussi
2021-02-03 1:30 ` Guenter Roeck
2021-02-02 22:15 ` [PATCH v6 26/37] firmware: arm_scmi: remove legacy scmi_sensor_ops protocol interface Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 27/37] firmware: arm_scmi: port SystemPower protocol to new protocols interface Cristian Marussi
2021-02-02 22:15 ` Cristian Marussi [this message]
2021-02-02 22:15 ` [PATCH v6 29/37] regulator: scmi: port driver to the new scmi_voltage_proto_ops interface Cristian Marussi
2021-02-03 13:24 ` Mark Brown
2021-02-03 14:39 ` Cristian Marussi
2021-02-03 16:18 ` Mark Brown
2021-02-02 22:15 ` [PATCH v6 30/37] firmware: arm_scmi: remove legacy scmi_voltage_ops protocol interface Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 31/37] firmware: arm_scmi: make references to handle const Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 32/37] firmware: arm_scmi: cleanup legacy protocol init code Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 33/37] firmware: arm_scmi: cleanup unused core xfer wrappers Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 34/37] firmware: arm_scmi: cleanup events registration transient code Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 35/37] firmware: arm_scmi: make notify_priv really private Cristian Marussi
2021-03-08 6:12 ` Sudeep Holla
2021-03-08 11:39 ` Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 36/37] firmware: arm_scmi: add protocol modularization support Cristian Marussi
2021-03-08 7:34 ` Sudeep Holla
2021-03-09 8:04 ` Cristian Marussi
2021-02-02 22:15 ` [PATCH v6 37/37] firmware: arm_scmi: add dynamic scmi devices creation Cristian Marussi
2021-03-15 8:33 ` Sudeep Holla
2021-03-15 9:03 ` Cristian Marussi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210202221555.41167-29-cristian.marussi@arm.com \
--to=cristian.marussi@arm.com \
--cc=Jonathan.Cameron@Huawei.com \
--cc=etienne.carriere@linaro.org \
--cc=f.fainelli@gmail.com \
--cc=james.quinlan@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lukasz.luba@arm.com \
--cc=souvik.chakravarty@arm.com \
--cc=sudeep.holla@arm.com \
--cc=thara.gopinath@linaro.org \
--cc=vincent.guittot@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).