linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: ohad@wizery.com, bjorn.andersson@linaro.org, arnaud.pouliquen@st.com
Cc: devicetree@vger.kernel.org, alexandre.torgue@st.com,
	linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
	robh+dt@kernel.org, mcoquelin.stm32@gmail.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 07/19] remoteproc: Add new get_loaded_rsc_table() to rproc_ops
Date: Thu, 11 Feb 2021 16:46:15 -0700	[thread overview]
Message-ID: <20210211234627.2669674-8-mathieu.poirier@linaro.org> (raw)
In-Reply-To: <20210211234627.2669674-1-mathieu.poirier@linaro.org>

Add a new get_loaded_rsc_table() operation in order to support
scenarios where the remoteproc core has booted a remote processor
and detaches from it.  When re-attaching to the remote processor,
the core needs to know where the resource table has been placed
in memory.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
New for V5:
- Added function rproc_set_loaded_rsc_table() to keep rproc_attach() clean.
- Setting ->cached_table, ->table_ptr and ->table_sz in the remoteproc core
  rather than the platform drivers.
---
 drivers/remoteproc/remoteproc_core.c     | 35 ++++++++++++++++++++++++
 drivers/remoteproc/remoteproc_internal.h | 10 +++++++
 include/linux/remoteproc.h               |  6 +++-
 3 files changed, 50 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index e6606d10a4c8..741bc20de437 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1537,6 +1537,35 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 	return ret;
 }
 
+static int rproc_set_loaded_rsc_table(struct rproc *rproc)
+{
+	struct resource_table *table_ptr;
+	struct device *dev = &rproc->dev;
+	size_t table_sz;
+	int ret;
+
+	table_ptr = rproc_get_loaded_rsc_table(rproc, &table_sz);
+	if (IS_ERR_OR_NULL(table_ptr)) {
+		if (!table_ptr)
+			ret = -EINVAL;
+		else
+			ret = PTR_ERR(table_ptr);
+
+		dev_err(dev, "can't load resource table: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * The resource table is already loaded in device memory, no need
+	 * to work with a cached table.
+	 */
+	rproc->cached_table = NULL;
+	rproc->table_ptr = table_ptr;
+	rproc->table_sz = table_sz;
+
+	return 0;
+}
+
 /*
  * Attach to remote processor - similar to rproc_fw_boot() but without
  * the steps that deal with the firmware image.
@@ -1556,6 +1585,12 @@ static int rproc_attach(struct rproc *rproc)
 		return ret;
 	}
 
+	ret = rproc_set_loaded_rsc_table(rproc);
+	if (ret) {
+		dev_err(dev, "can't load resource table: %d\n", ret);
+		goto disable_iommu;
+	}
+
 	/* reset max_notifyid */
 	rproc->max_notifyid = -1;
 
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index c34002888d2c..4f73aac7e60d 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -177,6 +177,16 @@ struct resource_table *rproc_find_loaded_rsc_table(struct rproc *rproc,
 	return NULL;
 }
 
+static inline
+struct resource_table *rproc_get_loaded_rsc_table(struct rproc *rproc,
+						  size_t *size)
+{
+	if (rproc->ops->get_loaded_rsc_table)
+		return rproc->ops->get_loaded_rsc_table(rproc, size);
+
+	return NULL;
+}
+
 static inline
 bool rproc_u64_fit_in_size_t(u64 val)
 {
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 6b0a0ed30a03..51538a7d120d 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -368,7 +368,9 @@ enum rsc_handling_status {
  * RSC_HANDLED if resource was handled, RSC_IGNORED if not handled and a
  * negative value on error
  * @load_rsc_table:	load resource table from firmware image
- * @find_loaded_rsc_table: find the loaded resouce table
+ * @find_loaded_rsc_table: find the loaded resource table from firmware image
+ * @get_loaded_rsc_table: get resource table installed in memory
+ *			  by external entity
  * @load:		load firmware to memory, where the remote processor
  *			expects to find it
  * @sanity_check:	sanity check the fw image
@@ -390,6 +392,8 @@ struct rproc_ops {
 			  int offset, int avail);
 	struct resource_table *(*find_loaded_rsc_table)(
 				struct rproc *rproc, const struct firmware *fw);
+	struct resource_table *(*get_loaded_rsc_table)(
+				struct rproc *rproc, size_t *size);
 	int (*load)(struct rproc *rproc, const struct firmware *fw);
 	int (*sanity_check)(struct rproc *rproc, const struct firmware *fw);
 	u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-02-11 23:49 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-11 23:46 [PATCH v5 00/19] remoteproc: Add support for detaching a remote processor Mathieu Poirier
2021-02-11 23:46 ` [PATCH v5 01/19] dt-bindings: remoteproc: Add bindind to support autonomous processors Mathieu Poirier
2021-02-11 23:46 ` [PATCH v5 02/19] remoteproc: Re-check state in rproc_shutdown() Mathieu Poirier
2021-02-11 23:46 ` [PATCH v5 03/19] remoteproc: Remove useless check in rproc_del() Mathieu Poirier
2021-02-11 23:46 ` [PATCH v5 04/19] remoteproc: Rename function rproc_actuate() Mathieu Poirier
2021-02-11 23:46 ` [PATCH v5 05/19] remoteproc: Add new RPROC_ATTACHED state Mathieu Poirier
2021-02-11 23:46 ` [PATCH v5 06/19] remoteproc: Properly represent the attached state Mathieu Poirier
2021-02-11 23:46 ` Mathieu Poirier [this message]
2021-02-15 13:10   ` [PATCH v5 07/19] remoteproc: Add new get_loaded_rsc_table() to rproc_ops Arnaud POULIQUEN
2021-02-17 21:22     ` Mathieu Poirier
2021-02-11 23:46 ` [PATCH v5 08/19] remoteproc: stm32: Move resource table setup " Mathieu Poirier
2021-02-11 23:46 ` [PATCH v5 09/19] remoteproc: stm32: Move memory parsing " Mathieu Poirier
2021-02-11 23:46 ` [PATCH v5 10/19] remoteproc: Add new detach() remoteproc operation Mathieu Poirier
2021-02-11 23:46 ` [PATCH v5 11/19] remoteproc: Introduce function __rproc_detach() Mathieu Poirier
2021-02-11 23:46 ` [PATCH v5 12/19] remoteproc: Introduce function rproc_detach() Mathieu Poirier
2021-02-11 23:46 ` [PATCH v5 13/19] remoteproc: Properly deal with the resource table Mathieu Poirier
2021-02-15 12:06   ` Dan Carpenter
2021-02-15 13:19   ` Arnaud POULIQUEN
2021-02-11 23:46 ` [PATCH v5 14/19] remoteproc: Add return value to function rproc_shutdown() Mathieu Poirier
2021-02-11 23:46 ` [PATCH v5 15/19] remoteproc: Properly deal with a kernel panic when attached Mathieu Poirier
2021-02-11 23:46 ` [PATCH v5 16/19] remoteproc: Properly deal with a stop request " Mathieu Poirier
2021-02-11 23:46 ` [PATCH v5 17/19] remoteproc: Properly deal with a start " Mathieu Poirier
2021-02-11 23:46 ` [PATCH v5 18/19] remoteproc: Properly deal with detach request Mathieu Poirier
2021-02-11 23:46 ` [PATCH v5 19/19] remoteproc: Refactor rproc delete and cdev release path Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210211234627.2669674-8-mathieu.poirier@linaro.org \
    --to=mathieu.poirier@linaro.org \
    --cc=alexandre.torgue@st.com \
    --cc=arnaud.pouliquen@st.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=ohad@wizery.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).