From: "Pali Rohár" <pali@kernel.org>
To: Gregory Clement <gregory.clement@bootlin.com>,
Andrew Lunn <andrew@lunn.ch>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org
Cc: "Marek Behún" <kabel@kernel.org>,
"Tomasz Maciej Nowak" <tmn505@gmail.com>,
"Luka Perkov" <luka.perkov@sartura.hr>,
"Andre Heider" <a.heider@gmail.com>,
"Vladimir Vid" <vladimir.vid@sartura.hr>,
"Russell King" <rmk+kernel@armlinux.org.uk>,
"Gérald Kerma" <gerald@gk2.net>,
"Miquel Raynal" <miquel.raynal@bootlin.com>,
"Konstantin Porotchkin" <kostap@marvell.com>
Subject: [PATCH mvebu v3 00/10] Armada 37xx: Fix cpufreq changing base CPU speed to 800 MHz from 1000 MHz
Date: Mon, 22 Feb 2021 20:41:48 +0100 [thread overview]
Message-ID: <20210222194158.12342-1-pali@kernel.org> (raw)
In-Reply-To: <20210114124032.12765-1-pali@kernel.org>
Hello!
This is third version of patches for Armada 37xx cpufreq driver which
fix CPU scaling with 1 GHz base frequency.
The only change in this third version is modified patch 04/10 with fixes
for 1.2 GHz variant of Espressobin. Minimal CPU voltage in L1 load for
1.2 GHz variant was increased to 1.155V.
Patches are now rebased on top of the kernel version 5.11 with all
collected Acked-by/Tested-by lines and are available also in my git
tree in branch a3720-cpufreq-issues:
https://git.kernel.org/pub/scm/linux/kernel/git/pali/linux.git/log/?h=a3720-cpufreq-issues
If you have other Armada 3720 boards with 1.2 GHz CPU, including
Espressobin V7, let us know if it is working fine for you.
Marek & Pali
Marek Behún (3):
arm64: dts: marvell: armada-37xx: add syscon compatible to NB clk node
cpufreq: armada-37xx: Fix setting TBG parent for load levels
clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM
clock
Pali Rohár (7):
cpufreq: armada-37xx: Fix the AVS value for load L1
clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to
1 GHz
clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1
to L0
cpufreq: armada-37xx: Fix driver cleanup when registration failed
cpufreq: armada-37xx: Fix determining base CPU frequency
cpufreq: armada-37xx: Remove cur_frequency variable
cpufreq: armada-37xx: Fix module unloading
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 3 +-
drivers/clk/mvebu/armada-37xx-periph.c | 83 +++++++-------
drivers/cpufreq/armada-37xx-cpufreq.c | 111 +++++++++++++++----
3 files changed, 135 insertions(+), 62 deletions(-)
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-02-22 19:44 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-14 12:40 [PATCH mvebu v2 00/10] Armada 37xx: Fix cpufreq changing base CPU speed to 800 MHz from 1000 MHz Pali Rohár
2021-01-14 12:40 ` [PATCH mvebu v2 01/10] arm64: dts: marvell: armada-37xx: add syscon compatible to NB clk node Pali Rohár
2021-04-02 19:50 ` Gregory CLEMENT
2021-01-14 12:40 ` [PATCH mvebu v2 02/10] cpufreq: armada-37xx: Fix setting TBG parent for load levels Pali Rohár
2021-01-14 12:40 ` [PATCH mvebu v2 03/10] clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock Pali Rohár
2021-02-10 1:58 ` Stephen Boyd
2021-01-14 12:40 ` [PATCH mvebu v2 04/10] cpufreq: armada-37xx: Fix the AVS value for loads L0 and L1 Pali Rohár
2021-01-14 12:40 ` [PATCH mvebu v2 05/10] clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz Pali Rohár
2021-02-10 1:58 ` Stephen Boyd
2021-01-14 12:40 ` [PATCH mvebu v2 06/10] clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0 Pali Rohár
2021-02-10 1:58 ` Stephen Boyd
2021-01-14 12:40 ` [PATCH mvebu v2 07/10] cpufreq: armada-37xx: Fix driver cleanup when registration failed Pali Rohár
2021-01-14 12:40 ` [PATCH mvebu v2 08/10] cpufreq: armada-37xx: Fix determining base CPU frequency Pali Rohár
2021-01-14 12:40 ` [PATCH mvebu v2 09/10] cpufreq: armada-37xx: Remove cur_frequency variable Pali Rohár
2021-03-29 15:00 ` Gregory CLEMENT
2021-03-29 21:44 ` Marek Behún
2021-01-14 12:40 ` [PATCH mvebu v2 10/10] cpufreq: armada-37xx: Fix module unloading Pali Rohár
2021-02-01 14:35 ` [PATCH mvebu v2 00/10] Armada 37xx: Fix cpufreq changing base CPU speed to 800 MHz from 1000 MHz Tomasz Maciej Nowak
2021-02-03 19:29 ` Anders Trier Olesen
2021-02-22 19:41 ` Pali Rohár [this message]
2021-02-22 19:41 ` [PATCH mvebu v3 01/10] arm64: dts: marvell: armada-37xx: add syscon compatible to NB clk node Pali Rohár
2021-02-22 19:41 ` [PATCH mvebu v3 02/10] cpufreq: armada-37xx: Fix setting TBG parent for load levels Pali Rohár
2021-03-29 14:45 ` Gregory CLEMENT
2021-02-22 19:41 ` [PATCH mvebu v3 03/10] clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock Pali Rohár
2021-03-29 14:46 ` Gregory CLEMENT
2021-02-22 19:41 ` [PATCH mvebu v3 04/10] cpufreq: armada-37xx: Fix the AVS value for load L1 Pali Rohár
2021-03-29 14:47 ` Gregory CLEMENT
2021-02-22 19:41 ` [PATCH mvebu v3 05/10] clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz Pali Rohár
2021-03-29 14:48 ` Gregory CLEMENT
2021-02-22 19:41 ` [PATCH mvebu v3 06/10] clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0 Pali Rohár
2021-03-29 14:49 ` Gregory CLEMENT
2021-02-22 19:41 ` [PATCH mvebu v3 07/10] cpufreq: armada-37xx: Fix driver cleanup when registration failed Pali Rohár
2021-03-29 14:58 ` Gregory CLEMENT
2021-02-22 19:41 ` [PATCH mvebu v3 08/10] cpufreq: armada-37xx: Fix determining base CPU frequency Pali Rohár
2021-03-29 14:59 ` Gregory CLEMENT
2021-02-22 19:41 ` [PATCH mvebu v3 09/10] cpufreq: armada-37xx: Remove cur_frequency variable Pali Rohár
2021-02-22 19:41 ` [PATCH mvebu v3 10/10] cpufreq: armada-37xx: Fix module unloading Pali Rohár
2021-03-01 19:20 ` [PATCH mvebu v3 00/10] Armada 37xx: Fix cpufreq changing base CPU speed to 800 MHz from 1000 MHz Pali Rohár
2021-03-12 9:12 ` Gregory CLEMENT
2021-03-12 9:27 ` Marek Behún
2021-03-28 11:31 ` Pali Rohár
2021-04-08 0:38 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210222194158.12342-1-pali@kernel.org \
--to=pali@kernel.org \
--cc=a.heider@gmail.com \
--cc=andrew@lunn.ch \
--cc=gerald@gk2.net \
--cc=gregory.clement@bootlin.com \
--cc=kabel@kernel.org \
--cc=kostap@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luka.perkov@sartura.hr \
--cc=miquel.raynal@bootlin.com \
--cc=mturquette@baylibre.com \
--cc=rmk+kernel@armlinux.org.uk \
--cc=sboyd@kernel.org \
--cc=tmn505@gmail.com \
--cc=vladimir.vid@sartura.hr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).