linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Cc: linux-rtc@vger.kernel.org,
	Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	srv_heupstream@mediatek.com, Fei Shao <fshao@chromium.org>,
	Ran Bi <ran.bi@mediatek.com>, Sean Wang <sean.wang@mediatek.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	linux-kernel@vger.kernel.org,
	Project_Global_Chrome_Upstream_Group@mediatek.com,
	devicetree@vger.kernel.org, Mark Brown <broonie@kernel.org>,
	linux-mediatek@lists.infradead.org,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Eddie Huang <eddie.huang@mediatek.com>,
	Yuchen Huang <yuchen.huang@mediatek.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH RESEND v5 5/8] mfd: Add support for the MediaTek MT6359 PMIC
Date: Mon, 1 Mar 2021 10:20:11 +0000	[thread overview]
Message-ID: <20210301102011.GI641347@dell> (raw)
In-Reply-To: <1611913781-23460-6-git-send-email-hsin-hsiung.wang@mediatek.com>

On Fri, 29 Jan 2021, Hsin-Hsiung Wang wrote:

> This adds support for the MediaTek MT6359 PMIC. This is a
> multifunction device with the following sub modules:
> 
> - Codec
> - Interrupt
> - Regulator
> - RTC
> 
> It is interfaced to the host controller using SPI interface
> by a proprietary hardware called PMIC wrapper or pwrap.
> MT6359 MFD is a child device of the pwrap.
> 
> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> ---
> changes since v4:
> - remove unused compatible name in the mt6359 mfd cells.
> ---
>  drivers/mfd/mt6358-irq.c             |  24 ++
>  drivers/mfd/mt6397-core.c            |  26 ++
>  include/linux/mfd/mt6359/core.h      | 133 +++++++
>  include/linux/mfd/mt6359/registers.h | 529 +++++++++++++++++++++++++++
>  include/linux/mfd/mt6397/core.h      |   1 +
>  5 files changed, 713 insertions(+)
>  create mode 100644 include/linux/mfd/mt6359/core.h
>  create mode 100644 include/linux/mfd/mt6359/registers.h
> 
> diff --git a/drivers/mfd/mt6358-irq.c b/drivers/mfd/mt6358-irq.c
> index 4b094e5e51cc..83f3ffbdbb4c 100644
> --- a/drivers/mfd/mt6358-irq.c
> +++ b/drivers/mfd/mt6358-irq.c
> @@ -5,6 +5,8 @@
>  #include <linux/interrupt.h>
>  #include <linux/mfd/mt6358/core.h>
>  #include <linux/mfd/mt6358/registers.h>
> +#include <linux/mfd/mt6359/core.h>
> +#include <linux/mfd/mt6359/registers.h>
>  #include <linux/mfd/mt6397/core.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> @@ -26,6 +28,17 @@ static const struct irq_top_t mt6358_ints[] = {
>  	MT6358_TOP_GEN(MISC),
>  };
>  
> +static const struct irq_top_t mt6359_ints[] = {
> +	MT6359_TOP_GEN(BUCK),
> +	MT6359_TOP_GEN(LDO),
> +	MT6359_TOP_GEN(PSC),
> +	MT6359_TOP_GEN(SCK),
> +	MT6359_TOP_GEN(BM),
> +	MT6359_TOP_GEN(HK),
> +	MT6359_TOP_GEN(AUD),
> +	MT6359_TOP_GEN(MISC),
> +};
> +
>  static struct pmic_irq_data mt6358_irqd = {
>  	.num_top = ARRAY_SIZE(mt6358_ints),
>  	.num_pmic_irqs = MT6358_IRQ_NR,
> @@ -33,6 +46,13 @@ static struct pmic_irq_data mt6358_irqd = {
>  	.pmic_ints = mt6358_ints,
>  };
>  
> +static struct pmic_irq_data mt6359_irqd = {
> +	.num_top = ARRAY_SIZE(mt6359_ints),
> +	.num_pmic_irqs = MT6359_IRQ_NR,
> +	.top_int_status_reg = MT6359_TOP_INT_STATUS0,
> +	.pmic_ints = mt6359_ints,
> +};
> +
>  static void pmic_irq_enable(struct irq_data *data)
>  {
>  	unsigned int hwirq = irqd_to_hwirq(data);
> @@ -195,6 +215,10 @@ int mt6358_irq_init(struct mt6397_chip *chip)
>  		chip->irq_data = &mt6358_irqd;
>  		break;
>  
> +	case MT6359_CHIP_ID:
> +		chip->irq_data = &mt6359_irqd;
> +		break;
> +
>  	default:
>  		dev_err(chip->dev, "unsupported chip: 0x%x\n", chip->chip_id);
>  		return -ENODEV;
> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
> index 7518d74c3b4c..617e4e4d5de0 100644
> --- a/drivers/mfd/mt6397-core.c
> +++ b/drivers/mfd/mt6397-core.c
> @@ -13,9 +13,11 @@
>  #include <linux/mfd/core.h>
>  #include <linux/mfd/mt6323/core.h>
>  #include <linux/mfd/mt6358/core.h>
> +#include <linux/mfd/mt6359/core.h>
>  #include <linux/mfd/mt6397/core.h>
>  #include <linux/mfd/mt6323/registers.h>
>  #include <linux/mfd/mt6358/registers.h>
> +#include <linux/mfd/mt6359/registers.h>
>  #include <linux/mfd/mt6397/registers.h>
>  
>  #define MT6323_RTC_BASE		0x8000
> @@ -99,6 +101,19 @@ static const struct mfd_cell mt6358_devs[] = {
>  	},
>  };
>  
> +static const struct mfd_cell mt6359_devs[] = {
> +	{
> +		.name = "mt6359-regulator",
> +	}, {
> +		.name = "mt6359-rtc",
> +		.num_resources = ARRAY_SIZE(mt6358_rtc_resources),
> +		.resources = mt6358_rtc_resources,
> +		.of_compatible = "mediatek,mt6358-rtc",
> +	}, {
> +		.name = "mt6359-sound",
> +	},
> +};

Nit: Please put the single-line entries on one line.

Like this:

	{ .name = "mt6359-sound" },

>  static const struct mfd_cell mt6397_devs[] = {
>  	{
>  		.name = "mt6397-rtc",
> @@ -149,6 +164,14 @@ static const struct chip_data mt6358_core = {
>  	.irq_init = mt6358_irq_init,
>  };
>  
> +static const struct chip_data mt6359_core = {
> +	.cid_addr = MT6359_SWCID,
> +	.cid_shift = 8,
> +	.cells = mt6359_devs,
> +	.cell_size = ARRAY_SIZE(mt6359_devs),
> +	.irq_init = mt6358_irq_init,
> +};
> +
>  static const struct chip_data mt6397_core = {
>  	.cid_addr = MT6397_CID,
>  	.cid_shift = 0,
> @@ -218,6 +241,9 @@ static const struct of_device_id mt6397_of_match[] = {
>  	}, {
>  		.compatible = "mediatek,mt6358",
>  		.data = &mt6358_core,
> +	}, {
> +		.compatible = "mediatek,mt6359",
> +		.data = &mt6359_core,
>  	}, {
>  		.compatible = "mediatek,mt6397",
>  		.data = &mt6397_core,
> diff --git a/include/linux/mfd/mt6359/core.h b/include/linux/mfd/mt6359/core.h
> new file mode 100644
> index 000000000000..61872f1ecbe4
> --- /dev/null
> +++ b/include/linux/mfd/mt6359/core.h
> @@ -0,0 +1,133 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2020 MediaTek Inc.

This is out of date.

> + */
> +
> +#ifndef __MFD_MT6359_CORE_H__
> +#define __MFD_MT6359_CORE_H__

[...]

> +#endif /* __MFD_MT6359_CORE_H__ */
> diff --git a/include/linux/mfd/mt6359/registers.h b/include/linux/mfd/mt6359/registers.h
> new file mode 100644
> index 000000000000..4d72f0a7f2b0
> --- /dev/null
> +++ b/include/linux/mfd/mt6359/registers.h
> @@ -0,0 +1,529 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2020 MediaTek Inc.

This too.

> + */
> +
> +#ifndef __MFD_MT6359_REGISTERS_H__
> +#define __MFD_MT6359_REGISTERS_H__

[...]

> +#endif /* __MFD_MT6359_REGISTERS_H__ */
> diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/core.h
> index 949268581b36..56f210eebc54 100644
> --- a/include/linux/mfd/mt6397/core.h
> +++ b/include/linux/mfd/mt6397/core.h
> @@ -13,6 +13,7 @@
>  enum chip_id {
>  	MT6323_CHIP_ID = 0x23,
>  	MT6358_CHIP_ID = 0x58,
> +	MT6359_CHIP_ID = 0x59,
>  	MT6391_CHIP_ID = 0x91,
>  	MT6397_CHIP_ID = 0x97,
>  };

Once you fixed those issues, feel free to add my:

For my own reference (apply this as-is to your sign-off block):

  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-03-01 10:25 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-29  9:49 [PATCH RESEND v5 0/8] Add Support for MediaTek PMIC MT6359 Hsin-Hsiung Wang
2021-01-29  9:49 ` [PATCH RESEND v5 1/8] mfd: mt6358: refine interrupt code Hsin-Hsiung Wang
2021-01-29  9:49 ` [PATCH RESEND v5 2/8] rtc: mt6397: refine RTC_TC_MTH Hsin-Hsiung Wang
2021-01-29  9:49 ` [PATCH RESEND v5 3/8] dt-bindings: mfd: Add compatible for the MediaTek MT6359 PMIC Hsin-Hsiung Wang
2021-02-05 22:04   ` Rob Herring
2021-01-29  9:49 ` [PATCH RESEND v5 4/8] dt-bindings: regulator: Add document for MT6359 regulator Hsin-Hsiung Wang
2021-01-30 17:23   ` Rob Herring
2021-01-29  9:49 ` [PATCH RESEND v5 5/8] mfd: Add support for the MediaTek MT6359 PMIC Hsin-Hsiung Wang
2021-03-01 10:20   ` Lee Jones [this message]
2021-03-12 16:13     ` Hsin-hsiung Wang
2021-01-29  9:49 ` [PATCH RESEND v5 6/8] regulator: mt6359: Add support for MT6359 regulator Hsin-Hsiung Wang
2021-01-29  9:49 ` [PATCH RESEND v5 7/8] regulator: mt6359: Add support for MT6359P regulator Hsin-Hsiung Wang
2021-03-01 10:21   ` Lee Jones
2021-03-12 16:20     ` Hsin-hsiung Wang
2021-01-29  9:49 ` [PATCH RESEND v5 8/8] arm64: dts: mt6359: add PMIC MT6359 related nodes Hsin-Hsiung Wang
     [not found]   ` <1cbf58f1-376c-fa93-98a2-53a41fa24273@gmail.com>
2021-02-02  3:51     ` Tzung-Bi Shih
2021-02-07 18:48       ` Matthias Brugger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210301102011.GI641347@dell \
    --to=lee.jones@linaro.org \
    --cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=eddie.huang@mediatek.com \
    --cc=fshao@chromium.org \
    --cc=hsin-hsiung.wang@mediatek.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=matthias.bgg@gmail.com \
    --cc=ran.bi@mediatek.com \
    --cc=robh+dt@kernel.org \
    --cc=sean.wang@mediatek.com \
    --cc=srv_heupstream@mediatek.com \
    --cc=yuchen.huang@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).