Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: lee.jones@linaro.org
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>,
	linux-kernel@vger.kernel.org,
	Ludovic Desroches <ludovic.desroches@microchip.com>,
	Russell King <linux@armlinux.org.uk>,
	linux-arm-kernel@lists.infradead.org
Subject: [RESEND 1/1] arch: arm: mach-at91: pm: Move prototypes to mutually included header
Date: Wed,  3 Mar 2021 12:41:49 +0000
Message-ID: <20210303124149.3149511-1-lee.jones@linaro.org> (raw)

Both the caller and the supplier's source file should have access to
the include file containing the prototypes.

Fixes the following W=1 kernel build warning(s):

 drivers/pinctrl/pinctrl-at91.c:1637:6: warning: no previous prototype for ‘at91_pinctrl_gpio_suspend’ [-Wmissing-prototypes]
 1637 | void at91_pinctrl_gpio_suspend(void)
 | ^~~~~~~~~~~~~~~~~~~~~~~~~
 drivers/pinctrl/pinctrl-at91.c:1661:6: warning: no previous prototype for ‘at91_pinctrl_gpio_resume’ [-Wmissing-prototypes]
 1661 | void at91_pinctrl_gpio_resume(void)
 | ^~~~~~~~~~~~~~~~~~~~~~~~

Cc: Russell King <linux@armlinux.org.uk>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/mach-at91/pm.c        | 19 ++++++++-----------
 drivers/pinctrl/pinctrl-at91.c |  2 ++
 include/soc/at91/pm.h          | 16 ++++++++++++++++
 3 files changed, 26 insertions(+), 11 deletions(-)
 create mode 100644 include/soc/at91/pm.h

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 120f9aa6fff32..90dcdfe3b3d0d 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -17,6 +17,8 @@
 #include <linux/clk/at91_pmc.h>
 #include <linux/platform_data/atmel.h>
 
+#include <soc/at91/pm.h>
+
 #include <asm/cacheflush.h>
 #include <asm/fncpy.h>
 #include <asm/system_misc.h>
@@ -25,17 +27,6 @@
 #include "generic.h"
 #include "pm.h"
 
-/*
- * FIXME: this is needed to communicate between the pinctrl driver and
- * the PM implementation in the machine. Possibly part of the PM
- * implementation should be moved down into the pinctrl driver and get
- * called as part of the generic suspend/resume path.
- */
-#ifdef CONFIG_PINCTRL_AT91
-extern void at91_pinctrl_gpio_suspend(void);
-extern void at91_pinctrl_gpio_resume(void);
-#endif
-
 struct at91_soc_pm {
 	int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
 	int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity);
@@ -326,6 +317,12 @@ static void at91_pm_suspend(suspend_state_t state)
 static int at91_pm_enter(suspend_state_t state)
 {
 #ifdef CONFIG_PINCTRL_AT91
+	/*
+	 * FIXME: this is needed to communicate between the pinctrl driver and
+	 * the PM implementation in the machine. Possibly part of the PM
+	 * implementation should be moved down into the pinctrl driver and get
+	 * called as part of the generic suspend/resume path.
+	 */
 	at91_pinctrl_gpio_suspend();
 #endif
 
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 8003d1bd16953..fc61aaec34cc9 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -23,6 +23,8 @@
 /* Since we request GPIOs from ourself */
 #include <linux/pinctrl/consumer.h>
 
+#include <soc/at91/pm.h>
+
 #include "pinctrl-at91.h"
 #include "core.h"
 
diff --git a/include/soc/at91/pm.h b/include/soc/at91/pm.h
new file mode 100644
index 0000000000000..7a41e53a3ffa3
--- /dev/null
+++ b/include/soc/at91/pm.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Atmel Power Management
+ *
+ * Copyright (C) 2020 Atmel
+ *
+ * Author: Lee Jones <lee.jones@linaro.org>
+ */
+
+#ifndef __SOC_ATMEL_PM_H
+#define __SOC_ATMEL_PM_H
+
+void at91_pinctrl_gpio_suspend(void);
+void at91_pinctrl_gpio_resume(void);
+
+#endif /* __SOC_ATMEL_PM_H */
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-03 12:41 Lee Jones [this message]
2021-03-03 13:24 ` Alexandre Belloni
2021-03-03 14:14   ` Lee Jones
2021-03-24 11:50     ` Linus Walleij
2021-03-26 17:18 ` Alexandre Belloni
2021-03-26 17:34   ` Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210303124149.3149511-1-lee.jones@linaro.org \
    --to=lee.jones@linaro.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=ludovic.desroches@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git