From: quanyang.wang@windriver.com
To: Rob Herring <robh+dt@kernel.org>,
Michal Simek <michal.simek@xilinx.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, quanyang.wang@windriver.com
Subject: [PATCH] arm64: dts: zynqmp: Remove si5328 device nodes
Date: Mon, 8 Mar 2021 19:54:37 +0800 [thread overview]
Message-ID: <20210308115437.2232847-1-quanyang.wang@windriver.com> (raw)
From: Quanyang Wang <quanyang.wang@windriver.com>
The function of_i2c_get_board_info will call of_modalias_node to check
if a device_node contains "compatible" string. But for the device si5328
at zcu102/zcu106 boards, there is no proper DT bindings for them. So remove
si5328 device nodes from dts files to eliminate the error info in the boot
message:
i2c i2c-10: of_i2c: modalias failure on /axi/i2c@ff030000/i2c-mux@74/i2c@4/clock-generator@69
i2c i2c-10: Failed to create I2C device for /axi/i2c@ff030000/i2c-mux@74/i2c@4/clock-generator@69
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
---
.../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 20 +------------------
.../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 20 +------------------
2 files changed, 2 insertions(+), 38 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 12e8bd48dc8c..eca6c2de84a7 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -580,25 +580,7 @@ i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
- si5328: clock-generator@69 {/* SI5328 - u20 */
- reg = <0x69>;
- /*
- * Chip has interrupt present connected to PL
- * interrupt-parent = <&>;
- * interrupts = <>;
- */
- #address-cells = <1>;
- #size-cells = <0>;
- #clock-cells = <1>;
- clocks = <&refhdmi>;
- clock-names = "xtal";
- clock-output-names = "si5328";
-
- si5328_clk: clk0@0 {
- reg = <0>;
- clock-frequency = <27000000>;
- };
- };
+ /* SI5328 - u20 */
};
/* 5 - 7 unconnected */
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 18771e868399..eff7c6447087 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -581,25 +581,7 @@ i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
- si5328: clock-generator@69 {/* SI5328 - u20 */
- reg = <0x69>;
- /*
- * Chip has interrupt present connected to PL
- * interrupt-parent = <&>;
- * interrupts = <>;
- */
- #address-cells = <1>;
- #size-cells = <0>;
- #clock-cells = <1>;
- clocks = <&refhdmi>;
- clock-names = "xtal";
- clock-output-names = "si5328";
-
- si5328_clk: clk0@0 {
- reg = <0>;
- clock-frequency = <27000000>;
- };
- };
+ /* SI5328 - u20 */
};
i2c@5 {
#address-cells = <1>;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-03-08 11:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-08 11:54 quanyang.wang [this message]
2021-03-08 16:27 ` [PATCH] arm64: dts: zynqmp: Remove si5328 device nodes Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210308115437.2232847-1-quanyang.wang@windriver.com \
--to=quanyang.wang@windriver.com \
--cc=devicetree@vger.kernel.org \
--cc=krzk@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).