Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
* [v3,0/3] thermal: mediatek: Add LVTS architecture thermal controller
@ 2021-03-12  3:40 Michael Kao
  2021-03-12  3:40 ` [v3,1/3] thermal: mediatek: Relocate driver to mediatek folder Michael Kao
                   ` (2 more replies)
  0 siblings, 3 replies; 11+ messages in thread
From: Michael Kao @ 2021-03-12  3:40 UTC (permalink / raw)
  To: michael.kao, Zhang Rui, Daniel Lezcano, linux-pm, srv_heupstream
  Cc: Eduardo Valentin, Rob Herring, Mark Rutland, Matthias Brugger,
	hsinyi, devicetree, linux-kernel, linux-arm-kernel,
	linux-mediatek

This patch move thermal files related to Mediatek to the mediatek folder.
And introduce the new architecture LVTS (low pressure thermal sensor) driver to report
the highest temperature in the SoC and record the highest temperature sensor,
each sensor as a hot zone.
The LVTS body is divided into two parts, the LVTS controller and the LVTS device.
The LVTS controller can connect up to 4 LVTS devices, and each LVTS device
can connect up to 7 TSMCUs.

The architecture will be the first to be used on mt6873 and mt8192.

Change in v3:
        - [2/3]
          - change the expression in the lvts_temp_to_raw to dev_s64.

Change in v2:
	- Rebase to kernel-5.11-rc1.
	- [2/3]
	  - sort headers
	  - remove initial value 0 of msr_raw in the lvts_temp_to_raw.
	  - disconstruct the api of lvts_read_tc_msr_raw.
	  - add the initial value max_temp = 0 and compare e.q.
	    in the lvts_read_all_tc_temperature.
	  - add the return with invalid number in the lvts_init.

This patch depends on [1].

[1]https://patchwork.kernel.org/project/linux-mediatek/cover/1608642587-15634-1-git-send-email-weiyi.lu@mediatek.com/

Michael Kao (3):
  thermal: mediatek: Relocate driver to mediatek folder
  thermal: mediatek: Add LVTS drivers for SoC theraml zones
  dt-bindings: thermal: Add binding document for mt6873 thermal
    controller

 .../thermal/mediatek-thermal-lvts.yaml        |   81 ++
 drivers/thermal/Kconfig                       |   14 +-
 drivers/thermal/Makefile                      |    2 +-
 drivers/thermal/mediatek/Kconfig              |   33 +
 drivers/thermal/mediatek/Makefile             |    2 +
 .../{mtk_thermal.c => mediatek/soc_temp.c}    |    0
 drivers/thermal/mediatek/soc_temp_lvts.c      | 1287 +++++++++++++++++
 drivers/thermal/mediatek/soc_temp_lvts.h      |  312 ++++
 8 files changed, 1720 insertions(+), 11 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml
 create mode 100644 drivers/thermal/mediatek/Kconfig
 create mode 100644 drivers/thermal/mediatek/Makefile
 rename drivers/thermal/{mtk_thermal.c => mediatek/soc_temp.c} (100%)
 create mode 100644 drivers/thermal/mediatek/soc_temp_lvts.c
 create mode 100644 drivers/thermal/mediatek/soc_temp_lvts.h

-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [v3,1/3] thermal: mediatek: Relocate driver to mediatek folder
  2021-03-12  3:40 [v3,0/3] thermal: mediatek: Add LVTS architecture thermal controller Michael Kao
@ 2021-03-12  3:40 ` Michael Kao
  2021-04-07  9:08   ` Michael Kao
  2021-04-20 21:22   ` Daniel Lezcano
  2021-03-12  3:40 ` [v3,2/3] thermal: mediatek: Add LVTS drivers for SoC theraml zones Michael Kao
  2021-03-12  3:40 ` [v3, 3/3] dt-bindings: thermal: Add binding document for mt6873 thermal controller Michael Kao
  2 siblings, 2 replies; 11+ messages in thread
From: Michael Kao @ 2021-03-12  3:40 UTC (permalink / raw)
  To: michael.kao, Zhang Rui, Daniel Lezcano, linux-pm, srv_heupstream
  Cc: Eduardo Valentin, Rob Herring, Mark Rutland, Matthias Brugger,
	hsinyi, devicetree, linux-kernel, linux-arm-kernel,
	linux-mediatek

Add Mediatek proprietary folder to upstream more thermal zone and cooler
drivers. Relocate the original thermal controller driver to it and rename
as soc_temp.c to show its purpose more clearly.

Signed-off-by: Michael Kao <michael.kao@mediatek.com>
---
 drivers/thermal/Kconfig                       | 14 ++++-------
 drivers/thermal/Makefile                      |  2 +-
 drivers/thermal/mediatek/Kconfig              | 23 +++++++++++++++++++
 drivers/thermal/mediatek/Makefile             |  1 +
 .../{mtk_thermal.c => mediatek/soc_temp.c}    |  0
 5 files changed, 29 insertions(+), 11 deletions(-)
 create mode 100644 drivers/thermal/mediatek/Kconfig
 create mode 100644 drivers/thermal/mediatek/Makefile
 rename drivers/thermal/{mtk_thermal.c => mediatek/soc_temp.c} (100%)

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 7edc8dc6bbab..b2da0a1bda34 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -401,16 +401,10 @@ config DA9062_THERMAL
 	  zone.
 	  Compatible with the DA9062 and DA9061 PMICs.
 
-config MTK_THERMAL
-	tristate "Temperature sensor driver for mediatek SoCs"
-	depends on ARCH_MEDIATEK || COMPILE_TEST
-	depends on HAS_IOMEM
-	depends on NVMEM || NVMEM=n
-	depends on RESET_CONTROLLER
-	default y
-	help
-	  Enable this option if you want to have support for thermal management
-	  controller present in Mediatek SoCs
+menu "Mediatek thermal drivers"
+depends on ARCH_MEDIATEK || COMPILE_TEST
+source "drivers/thermal/mediatek/Kconfig"
+endmenu
 
 config AMLOGIC_THERMAL
 	tristate "Amlogic Thermal Support"
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index b64dd50a6629..f9e07c3f529e 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -55,7 +55,7 @@ obj-y				+= st/
 obj-$(CONFIG_QCOM_TSENS)	+= qcom/
 obj-y				+= tegra/
 obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
-obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o
+obj-$(CONFIG_MTK_THERMAL)	+= mediatek/
 obj-$(CONFIG_GENERIC_ADC_THERMAL)	+= thermal-generic-adc.o
 obj-$(CONFIG_ZX2967_THERMAL)	+= zx2967_thermal.o
 obj-$(CONFIG_UNIPHIER_THERMAL)	+= uniphier_thermal.o
diff --git a/drivers/thermal/mediatek/Kconfig b/drivers/thermal/mediatek/Kconfig
new file mode 100644
index 000000000000..0351e73170b7
--- /dev/null
+++ b/drivers/thermal/mediatek/Kconfig
@@ -0,0 +1,23 @@
+config MTK_THERMAL
+	tristate "Mediatek thermal drivers"
+	depends on THERMAL_OF
+	help
+	  This is the option for Mediatek thermal software
+	  solutions. Please enable corresponding options to
+	  get temperature information from thermal sensors or
+	  turn on throttle mechaisms for thermal mitigation.
+
+if MTK_THERMAL
+
+config MTK_SOC_THERMAL
+	tristate "Temperature sensor driver for mediatek SoCs"
+	depends on HAS_IOMEM
+	depends on NVMEM
+	depends on RESET_CONTROLLER
+	help
+	  Enable this option if you want to get SoC temperature
+	  information for Mediatek platforms. This driver
+	  configures thermal controllers to collect temperature
+	  via AUXADC interface.
+
+endif
diff --git a/drivers/thermal/mediatek/Makefile b/drivers/thermal/mediatek/Makefile
new file mode 100644
index 000000000000..f75313ddce5e
--- /dev/null
+++ b/drivers/thermal/mediatek/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MTK_SOC_THERMAL)	+= soc_temp.o
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mediatek/soc_temp.c
similarity index 100%
rename from drivers/thermal/mtk_thermal.c
rename to drivers/thermal/mediatek/soc_temp.c
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [v3,2/3] thermal: mediatek: Add LVTS drivers for SoC theraml zones
  2021-03-12  3:40 [v3,0/3] thermal: mediatek: Add LVTS architecture thermal controller Michael Kao
  2021-03-12  3:40 ` [v3,1/3] thermal: mediatek: Relocate driver to mediatek folder Michael Kao
@ 2021-03-12  3:40 ` Michael Kao
  2021-04-07  9:09   ` Michael Kao
  2021-03-12  3:40 ` [v3, 3/3] dt-bindings: thermal: Add binding document for mt6873 thermal controller Michael Kao
  2 siblings, 1 reply; 11+ messages in thread
From: Michael Kao @ 2021-03-12  3:40 UTC (permalink / raw)
  To: michael.kao, Zhang Rui, Daniel Lezcano, linux-pm, srv_heupstream
  Cc: Eduardo Valentin, Rob Herring, Mark Rutland, Matthias Brugger,
	hsinyi, devicetree, linux-kernel, linux-arm-kernel,
	linux-mediatek

Add a LVTS (Low voltage thermal sensor) driver to report junction
temperatures in Mediatek SoC and register the maximum temperature
of sensors and each sensor as a thermal zone.

Signed-off-by: Yu-Chia Chang <ethan.chang@mediatek.com>
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
---
 drivers/thermal/mediatek/Kconfig         |   10 +
 drivers/thermal/mediatek/Makefile        |    1 +
 drivers/thermal/mediatek/soc_temp_lvts.c | 1287 ++++++++++++++++++++++
 drivers/thermal/mediatek/soc_temp_lvts.h |  312 ++++++
 4 files changed, 1610 insertions(+)
 create mode 100644 drivers/thermal/mediatek/soc_temp_lvts.c
 create mode 100644 drivers/thermal/mediatek/soc_temp_lvts.h

diff --git a/drivers/thermal/mediatek/Kconfig b/drivers/thermal/mediatek/Kconfig
index 0351e73170b7..d716d0372e1e 100644
--- a/drivers/thermal/mediatek/Kconfig
+++ b/drivers/thermal/mediatek/Kconfig
@@ -20,4 +20,14 @@ config MTK_SOC_THERMAL
 	  configures thermal controllers to collect temperature
 	  via AUXADC interface.
 
+config MTK_SOC_THERMAL_LVTS
+        tristate "LVTS (Low voltage thermal sensor) driver for Mediatek SoCs"
+        depends on HAS_IOMEM
+        depends on NVMEM
+        depends on RESET_TI_SYSCON
+        help
+          Enable this option if you want to get SoC temperature
+          information for Mediatek platforms. This driver
+          configures LVTS thermal controllers to collect temperatures
+          via Analog Serial Interface(ASIF).
 endif
diff --git a/drivers/thermal/mediatek/Makefile b/drivers/thermal/mediatek/Makefile
index f75313ddce5e..16ce166e5916 100644
--- a/drivers/thermal/mediatek/Makefile
+++ b/drivers/thermal/mediatek/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_MTK_SOC_THERMAL)	+= soc_temp.o
+obj-$(CONFIG_MTK_SOC_THERMAL_LVTS)	+= soc_temp_lvts.o
diff --git a/drivers/thermal/mediatek/soc_temp_lvts.c b/drivers/thermal/mediatek/soc_temp_lvts.c
new file mode 100644
index 000000000000..8153edaaf815
--- /dev/null
+++ b/drivers/thermal/mediatek/soc_temp_lvts.c
@@ -0,0 +1,1287 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/thermal.h>
+#include "soc_temp_lvts.h"
+
+/*==================================================
+ * Definition or macro function
+ *==================================================
+ */
+#define STOP_COUNTING_V4 (DEVICE_WRITE | RG_TSFM_CTRL_0 << 8 | 0x00)
+#define SET_RG_TSFM_LPDLY_V4 (DEVICE_WRITE | RG_TSFM_CTRL_4 << 8 | 0xA6)
+#define SET_COUNTING_WINDOW_20US1_V4 (DEVICE_WRITE | RG_TSFM_CTRL_2 << 8 | 0x00)
+#define SET_COUNTING_WINDOW_20US2_V4 (DEVICE_WRITE | RG_TSFM_CTRL_1 << 8 | 0x20)
+#define TSV2F_CHOP_CKSEL_AND_TSV2F_EN_V4 (DEVICE_WRITE | RG_TSV2F_CTRL_2 << 8 | 0x84)
+#define TSBG_DEM_CKSEL_X_TSBG_CHOP_EN_V4 (DEVICE_WRITE | RG_TSV2F_CTRL_4 << 8 | 0x7C)
+#define SET_TS_RSV_V4 (DEVICE_WRITE | RG_TSV2F_CTRL_1 << 8 | 0x8D)
+#define SET_TS_EN_V4 (DEVICE_WRITE | RG_TSV2F_CTRL_0 << 8 | 0xF4)
+#define TOGGLE_RG_TSV2F_VCO_RST1_V4 (DEVICE_WRITE | RG_TSV2F_CTRL_0 << 8 | 0xFC)
+#define TOGGLE_RG_TSV2F_VCO_RST2_V4 (DEVICE_WRITE | RG_TSV2F_CTRL_0 << 8 | 0xF4)
+
+#define SET_LVTS_AUTO_RCK_V4 (DEVICE_WRITE | RG_TSV2F_CTRL_6 << 8 | 0x01)
+#define SELECT_SENSOR_RCK_V4(id) (DEVICE_WRITE | RG_TSV2F_CTRL_5 << 8 | (id))
+#define SET_DEVICE_SINGLE_MODE_V4 (DEVICE_WRITE | RG_TSFM_CTRL_3 << 8 | 0x78)
+#define KICK_OFF_RCK_COUNTING_V4 (DEVICE_WRITE | RG_TSFM_CTRL_0 << 8 | 0x02)
+#define SET_SENSOR_NO_RCK_V4 (DEVICE_WRITE | RG_TSV2F_CTRL_5 << 8 | 0x10)
+#define SET_DEVICE_LOW_POWER_SINGLE_MODE_V4 (DEVICE_WRITE | RG_TSFM_CTRL_3 << 8	| 0xB8)
+
+#define ENABLE_FEATURE(feature)		(lvts_data->feature_bitmap |= (feature))
+#define DISABLE_FEATURE(feature)	(lvts_data->feature_bitmap &= (~(feature)))
+#define IS_ENABLE(feature)		(lvts_data->feature_bitmap & (feature))
+
+#define DISABLE_THERMAL_HW_REBOOT (-274000)
+
+#define CLOCK_26MHZ_CYCLE_NS	(38)
+#define BUS_ACCESS_US		(2)
+
+#define FEATURE_DEVICE_AUTO_RCK	(BIT(0))
+#define FEATURE_CK26M_ACTIVE	(BIT(1))
+#define CK26M_ACTIVE   (((lvts_data->feature_bitmap & FEATURE_CK26M_ACTIVE)    \
+			? 1 : 0) << 30)
+#define GET_BASE_ADDR(tc_id)	\
+	(lvts_data->domain[lvts_data->tc[tc_id].domain_index].base	\
+	+ lvts_data->tc[tc_id].addr_offset)
+
+#define SET_TC_SPEED_IN_US(pu, gd, fd, sd) \
+	{	\
+		.period_unit = (((pu) * 1000) / (256 * CLOCK_26MHZ_CYCLE_NS)),	\
+		.group_interval_delay = ((gd) / (pu)),	\
+		.filter_interval_delay = ((fd) / (pu)),	\
+		.sensor_interval_delay = ((sd) / (pu)),	\
+	}
+
+#define GET_CAL_DATA_BITMASK(index, h, l)	\
+	(((index) < lvts_data->num_efuse_addr)	\
+	? ((lvts_data->efuse[(index)] & GENMASK(h, l)) >> l)	\
+	: 0)
+
+#define GET_CAL_DATA_BIT(index, bit)	\
+	(((index) < lvts_data->num_efuse_addr)	\
+	? ((lvts_data->efuse[index] & BIT(bit)) >> (bit))	\
+	: 0)
+
+#define GET_TC_SENSOR_NUM(tc_id)	\
+	(lvts_data->tc[tc_id].num_sensor)
+
+#define ONE_SAMPLE (lvts_data->counting_window_us + 2 * BUS_ACCESS_US)
+
+#define NUM_OF_SAMPLE(tc_id)	\
+	((lvts_data->tc[tc_id].hw_filter < LVTS_FILTER_2) ? 1 :	\
+	((lvts_data->tc[tc_id].hw_filter > LVTS_FILTER_16_OF_18) ? 1 :	\
+	((lvts_data->tc[tc_id].hw_filter == LVTS_FILTER_16_OF_18) ? 18 :\
+	((lvts_data->tc[tc_id].hw_filter == LVTS_FILTER_8_OF_10) ? 10 :	\
+	(lvts_data->tc[tc_id].hw_filter * 2)))))
+
+#define PERIOD_UNIT_US(tc_id)	\
+	((lvts_data->tc[tc_id].tc_speed.period_unit * 256 *	\
+	CLOCK_26MHZ_CYCLE_NS) / 1000)
+#define FILTER_INT_US(tc_id)	\
+	(lvts_data->tc[tc_id].tc_speed.filter_interval_delay	\
+	* PERIOD_UNIT_US(tc_id))
+#define SENSOR_INT_US(tc_id)	\
+	(lvts_data->tc[tc_id].tc_speed.sensor_interval_delay	\
+	* PERIOD_UNIT_US(tc_id))
+#define GROUP_INT_US(tc_id)	\
+	(lvts_data->tc[tc_id].tc_speed.group_interval_delay	\
+	* PERIOD_UNIT_US(tc_id))
+
+#define SENSOR_LATENCY_US(tc_id) \
+	((NUM_OF_SAMPLE(tc_id) - 1) * FILTER_INT_US(tc_id)	\
+	+ NUM_OF_SAMPLE(tc_id) * ONE_SAMPLE)
+
+#define GROUP_LATENCY_US(tc_id)	\
+	(GET_TC_SENSOR_NUM(tc_id) * SENSOR_LATENCY_US(tc_id)	\
+	+ (GET_TC_SENSOR_NUM(tc_id) - 1) * SENSOR_INT_US(tc_id)	\
+	+ GROUP_INT_US(tc_id))
+
+/*==================================================
+ * LVTS local common code
+ *==================================================
+ */
+static int lvts_raw_to_temp(struct formula_coeff *co, unsigned int msr_raw)
+{
+	/* This function returns degree mC */
+
+	int temp;
+
+	temp = (co->a * ((unsigned long long)msr_raw)) >> 14;
+	temp = temp + co->golden_temp * 500 + co->b;
+
+	return temp;
+}
+
+static unsigned int lvts_temp_to_raw(struct formula_coeff *co, int temp)
+{
+	unsigned int msr_raw;
+
+	msr_raw = div_s64((s64)((co->golden_temp * 500 + co->b - temp)) << 14,
+			 (-1 * co->a));
+
+	return msr_raw;
+}
+
+static int lvts_read_all_tc_temperature(struct lvts_data *lvts_data)
+{
+	struct tc_settings *tc = lvts_data->tc;
+	unsigned int i, j, s_index, msr_raw;
+	int max_temp = 0, current_temp;
+	void __iomem *base;
+
+	for (i = 0; i < lvts_data->num_tc; i++) {
+		base = GET_BASE_ADDR(i);
+		for (j = 0; j < tc[i].num_sensor; j++) {
+			s_index = tc[i].sensor_map[j];
+
+			msr_raw = readl(LVTSMSR0_0 + base + 0x4 * j) & MRS_RAW_MASK;
+			current_temp = lvts_raw_to_temp(&lvts_data->coeff, msr_raw);
+
+			if (msr_raw == 0)
+				current_temp = THERMAL_TEMP_INVALID;
+
+			max_temp = max(max_temp, current_temp);
+
+			lvts_data->sen_data[s_index].msr_raw = msr_raw;
+			lvts_data->sen_data[s_index].temp = current_temp;
+		}
+	}
+
+	return max_temp;
+}
+
+static int soc_temp_lvts_read_temp(void *data, int *temperature)
+{
+	struct soc_temp_tz *lvts_tz = (struct soc_temp_tz *)data;
+	struct lvts_data *lvts_data = lvts_tz->lvts_data;
+
+	if (lvts_tz->id == 0)
+		*temperature = lvts_read_all_tc_temperature(lvts_data);
+	else if (lvts_tz->id - 1 < lvts_data->num_sensor)
+		*temperature = lvts_data->sen_data[lvts_tz->id - 1].temp;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct thermal_zone_of_device_ops soc_temp_lvts_ops = {
+	.get_temp = soc_temp_lvts_read_temp,
+};
+
+static void lvts_write_device(struct lvts_data *lvts_data, unsigned int data,
+			      int tc_id)
+{
+	void __iomem *base;
+
+	base = GET_BASE_ADDR(tc_id);
+
+	writel(data, LVTS_CONFIG_0 + base);
+
+	usleep_range(5, 15);
+}
+
+static unsigned int lvts_read_device(struct lvts_data *lvts_data,
+				     unsigned int reg_idx, int tc_id)
+{
+	struct device *dev = lvts_data->dev;
+	void __iomem *base;
+	unsigned int data;
+	int ret;
+
+	base = GET_BASE_ADDR(tc_id);
+	writel(READ_DEVICE_REG(reg_idx), LVTS_CONFIG_0 + base);
+
+	ret = readl_poll_timeout(LVTS_CONFIG_0 + base, data,
+				 !(data & DEVICE_ACCESS_STARTUS),
+				 2, 200);
+	if (ret)
+		dev_err(dev,
+			"Error: LVTS %d DEVICE_ACCESS_START didn't ready\n", tc_id);
+
+	data = readl(LVTSRDATA0_0 + base);
+
+	return data;
+}
+
+static void wait_all_tc_sensing_point_idle(struct lvts_data *lvts_data)
+{
+	struct device *dev = lvts_data->dev;
+	unsigned int mask, error_code, is_error;
+	void __iomem *base;
+	int i, cnt, ret;
+
+	mask = BIT(10) | BIT(7) | BIT(0);
+
+	for (cnt = 0; cnt < 2; cnt++) {
+		is_error = 0;
+		for (i = 0; i < lvts_data->num_tc; i++) {
+			base = GET_BASE_ADDR(i);
+			ret = readl_poll_timeout(LVTSMSRCTL1_0 + base, error_code,
+						 !(error_code & mask), 2, 200);
+			/*
+			 * Error code
+			 * 000: IDLE
+			 * 001: Write transaction
+			 * 010: Waiting for read after Write
+			 * 011: Disable Continue fetching on Device
+			 * 100: Read transaction
+			 * 101: Set Device special Register for Voltage threshold
+			 * 111: Set TSMCU number for Fetch
+			 */
+			error_code = ((error_code & BIT(10)) >> 8) +
+				((error_code & BIT(7)) >> 6) +
+				(error_code & BIT(0));
+
+			if (ret)
+				dev_err(dev,
+					"Error LVTS %d sensing points aren't idle, error_code %d\n",
+					i, error_code);
+
+			if (error_code != 0)
+				is_error = 1;
+		}
+
+		if (is_error == 0)
+			break;
+	}
+}
+
+static void lvts_reset(struct lvts_data *lvts_data)
+{
+	int i;
+
+	for (i = 0; i < lvts_data->num_domain; i++) {
+		if (lvts_data->domain[i].reset)
+			reset_control_assert(lvts_data->domain[i].reset);
+
+		if (lvts_data->domain[i].reset)
+			reset_control_deassert(lvts_data->domain[i].reset);
+	}
+}
+
+static void device_identification(struct lvts_data *lvts_data)
+{
+	struct device *dev = lvts_data->dev;
+	unsigned int i, data;
+	void __iomem *base;
+
+	for (i = 0; i < lvts_data->num_tc; i++) {
+		base = GET_BASE_ADDR(i);
+
+		writel(ENABLE_LVTS_CTRL_CLK, LVTSCLKEN_0 + base);
+
+		lvts_write_device(lvts_data, RESET_ALL_DEVICES, i);
+
+		lvts_write_device(lvts_data, READ_BACK_DEVICE_ID, i);
+
+		/* Check LVTS device ID */
+		data = (readl(LVTS_ID_0 + base) & GENMASK(7, 0));
+		if (data != (0x81 + i))
+			dev_err(dev, "LVTS_TC_%d, Device ID should be 0x%x, but 0x%x\n",
+				i, (0x81 + i), data);
+	}
+}
+
+static void disable_all_sensing_points(struct lvts_data *lvts_data)
+{
+	unsigned int i;
+	void __iomem *base;
+
+	for (i = 0; i < lvts_data->num_tc; i++) {
+		base = GET_BASE_ADDR(i);
+		writel(DISABLE_SENSING_POINT, LVTSMONCTL0_0 + base);
+	}
+}
+
+static void enable_all_sensing_points(struct lvts_data *lvts_data)
+{
+	struct device *dev = lvts_data->dev;
+	struct tc_settings *tc = lvts_data->tc;
+	unsigned int i, num;
+	void __iomem *base;
+
+	for (i = 0; i < lvts_data->num_tc; i++) {
+		base = GET_BASE_ADDR(i);
+		num = tc[i].num_sensor;
+
+		if (num > ALL_SENSING_POINTS) {
+			dev_err(dev,
+				"%s, LVTS%d, illegal number of sensors: %d\n",
+				__func__, i, tc[i].num_sensor);
+			continue;
+		}
+
+		writel(ENABLE_SENSING_POINT(num), LVTSMONCTL0_0 + base);
+	}
+}
+
+static void set_polling_speed(struct lvts_data *lvts_data, int tc_id)
+{
+	struct device *dev = lvts_data->dev;
+	struct tc_settings *tc = lvts_data->tc;
+	unsigned int lvts_mon_ctl_1, lvts_mon_ctl_2;
+	void __iomem *base;
+
+	base = GET_BASE_ADDR(tc_id);
+
+	lvts_mon_ctl_1 = ((tc[tc_id].tc_speed.group_interval_delay << 20) & GENMASK(29, 20)) |
+			(tc[tc_id].tc_speed.period_unit & GENMASK(9, 0));
+	lvts_mon_ctl_2 = ((tc[tc_id].tc_speed.filter_interval_delay << 16) & GENMASK(25, 16)) |
+			(tc[tc_id].tc_speed.sensor_interval_delay & GENMASK(9, 0));
+	/*
+	 * Clock source of LVTS thermal controller is 26MHz.
+	 * Period unit is a base for all interval delays
+	 * All interval delays must multiply it to convert a setting to time.
+	 * Filter interval delay is a delay between two samples of the same sensor
+	 * Sensor interval delay is a delay between two samples of differnet sensors
+	 * Group interval delay is a delay between different rounds.
+	 * For example:
+	 *     If Period unit = C, filter delay = 1, sensor delay = 2, group delay = 1,
+	 *     and two sensors, TS1 and TS2, are in a LVTS thermal controller
+	 *     and then
+	 *     Period unit = C * 1/26M * 256 = 12 * 38.46ns * 256 = 118.149us
+	 *     Filter interval delay = 1 * Period unit = 118.149us
+	 *     Sensor interval delay = 2 * Period unit = 236.298us
+	 *     Group interval delay = 1 * Period unit = 118.149us
+	 *
+	 *     TS1    TS1 ... TS1    TS2    TS2 ... TS2    TS1...
+	 *        <--> Filter interval delay
+	 *                       <--> Sensor interval delay
+	 *                                             <--> Group interval delay
+	 */
+	writel(lvts_mon_ctl_1, LVTSMONCTL1_0 + base);
+	writel(lvts_mon_ctl_2, LVTSMONCTL2_0 + base);
+
+	dev_info(dev, "%s %d, LVTSMONCTL1_0= 0x%x,LVTSMONCTL2_0= 0x%x\n",
+		 __func__, tc_id, readl(LVTSMONCTL1_0 + base),
+		 readl(LVTSMONCTL2_0 + base));
+}
+
+static void set_hw_filter(struct lvts_data *lvts_data, int tc_id)
+{
+	struct device *dev = lvts_data->dev;
+	struct tc_settings *tc = lvts_data->tc;
+	unsigned int option;
+	void __iomem *base;
+
+	base = GET_BASE_ADDR(tc_id);
+	option = tc[tc_id].hw_filter & 0x7;
+	/* hw filter
+	 * 000: Get one sample
+	 * 001: Get 2 samples and average them
+	 * 010: Get 4 samples, drop max and min, then average the rest of 2 samples
+	 * 011: Get 6 samples, drop max and min, then average the rest of 4 samples
+	 * 100: Get 10 samples, drop max and min, then average the rest of 8 samples
+	 * 101: Get 18 samples, drop max and min, then average the rest of 16 samples
+	 */
+	option = (option << 9) | (option << 6) | (option << 3) | option;
+
+	writel(option, LVTSMSRCTL0_0 + base);
+	dev_info(dev, "%s %d, LVTSMSRCTL0_0= 0x%x\n",
+		 __func__, tc_id, readl(LVTSMSRCTL0_0 + base));
+}
+
+static int get_dominator_index(struct lvts_data *lvts_data, int tc_id)
+{
+	struct device *dev = lvts_data->dev;
+	struct tc_settings *tc = lvts_data->tc;
+	int d_index;
+
+	if (tc[tc_id].dominator_sensing_point == ALL_SENSING_POINTS) {
+		d_index = ALL_SENSING_POINTS;
+	} else if (tc[tc_id].dominator_sensing_point <
+		tc[tc_id].num_sensor){
+		d_index = tc[tc_id].dominator_sensing_point;
+	} else {
+		dev_err(dev,
+			"Error: LVTS%d, dominator_sensing_point= %d should smaller than num_sensor= %d\n",
+			tc_id, tc[tc_id].dominator_sensing_point,
+			tc[tc_id].num_sensor);
+
+		dev_err(dev, "Use the sensing point 0 as the dominated sensor\n");
+		d_index = SENSING_POINT0;
+	}
+
+	return d_index;
+}
+
+static void disable_hw_reboot_interrupt(struct lvts_data *lvts_data, int tc_id)
+{
+	unsigned int temp;
+	void __iomem *base;
+
+	base = GET_BASE_ADDR(tc_id);
+
+	/* LVTS thermal controller has two interrupts for thermal HW reboot
+	 * One is for AP SW and the other is for RGU
+	 * The interrupt of AP SW can turn off by a bit of a register, but
+	 * the other for RGU cannot.
+	 * To prevent rebooting device accidentally, we are going to add
+	 * a huge offset to LVTS and make LVTS always report extremely low
+	 * temperature.
+	 */
+
+	/* After adding the huge offset 0x3FFF, LVTS alawys adds the
+	 * offset to MSR_RAW.
+	 * When MSR_RAW is larger, SW will convert lower temperature/
+	 */
+	temp = readl(LVTSPROTCTL_0 + base);
+	writel(temp | 0x3FFF, LVTSPROTCTL_0 + base);
+
+	/* Disable the interrupt of AP SW */
+	temp = readl(LVTSMONINT_0 + base);
+	writel(temp & ~(STAGE3_INT_EN), LVTSMONINT_0 + base);
+}
+
+static void enable_hw_reboot_interrupt(struct lvts_data *lvts_data, int tc_id)
+{
+	unsigned int temp;
+	void __iomem *base;
+
+	base = GET_BASE_ADDR(tc_id);
+
+	/* Enable the interrupt of AP SW */
+	temp = readl(LVTSMONINT_0 + base);
+	writel(temp | STAGE3_INT_EN, LVTSMONINT_0 + base);
+	/* Clear the offset */
+	temp = readl(LVTSPROTCTL_0 + base);
+	writel(temp & ~PROTOFFSET, LVTSPROTCTL_0 + base);
+}
+
+static void set_tc_hw_reboot_threshold(struct lvts_data *lvts_data,
+				       int trip_point, int tc_id)
+{
+	struct device *dev = lvts_data->dev;
+	unsigned int msr_raw, temp, config, d_index;
+	void __iomem *base;
+
+	base = GET_BASE_ADDR(tc_id);
+	d_index = get_dominator_index(lvts_data, tc_id);
+
+	dev_info(dev, "%s: LVTS%d, the dominator sensing point= %d\n",
+		 __func__, tc_id, d_index);
+
+	disable_hw_reboot_interrupt(lvts_data, tc_id);
+
+	temp = readl(LVTSPROTCTL_0 + base);
+	if (d_index == ALL_SENSING_POINTS) {
+		/* Maximum of 4 sensing points */
+		config = (0x1 << 16);
+		writel(config | temp, LVTSPROTCTL_0 + base);
+	} else {
+		/* Select protection sensor */
+		config = ((d_index << 2) + 0x2) << 16;
+		writel(config | temp, LVTSPROTCTL_0 + base);
+	}
+
+	msr_raw = lvts_temp_to_raw(&lvts_data->coeff, trip_point);
+	writel(msr_raw, LVTSPROTTC_0 + base);
+
+	enable_hw_reboot_interrupt(lvts_data, tc_id);
+}
+
+static void set_all_tc_hw_reboot(struct lvts_data *lvts_data)
+{
+	struct tc_settings *tc = lvts_data->tc;
+	int i, trip_point;
+
+	for (i = 0; i < lvts_data->num_tc; i++) {
+		trip_point = tc[i].hw_reboot_trip_point;
+
+		if (tc[i].num_sensor == 0)
+			continue;
+
+		if (trip_point == DISABLE_THERMAL_HW_REBOOT)
+			continue;
+
+		set_tc_hw_reboot_threshold(lvts_data, trip_point, i);
+	}
+}
+
+static int lvts_init(struct lvts_data *lvts_data)
+{
+	struct platform_ops *ops = &lvts_data->ops;
+	struct device *dev = lvts_data->dev;
+	int ret;
+
+	ret = clk_prepare_enable(lvts_data->clk);
+	if (ret) {
+		dev_err(dev,
+			"Error: Failed to enable lvts controller clock: %d\n",
+			ret);
+		return ret;
+	}
+
+	lvts_reset(lvts_data);
+
+	device_identification(lvts_data);
+	if (ops->device_enable_and_init)
+		ops->device_enable_and_init(lvts_data);
+
+	if (IS_ENABLE(FEATURE_DEVICE_AUTO_RCK)) {
+		if (ops->device_enable_auto_rck)
+			ops->device_enable_auto_rck(lvts_data);
+	} else {
+		if (ops->device_read_count_rc_n)
+			ops->device_read_count_rc_n(lvts_data);
+	}
+
+	if (ops->set_cal_data)
+		ops->set_cal_data(lvts_data);
+
+	disable_all_sensing_points(lvts_data);
+	wait_all_tc_sensing_point_idle(lvts_data);
+	if (ops->init_controller)
+		ops->init_controller(lvts_data);
+	enable_all_sensing_points(lvts_data);
+
+	set_all_tc_hw_reboot(lvts_data);
+
+	return 0;
+}
+
+static int prepare_calibration_data(struct lvts_data *lvts_data)
+{
+	struct device *dev = lvts_data->dev;
+	struct sensor_cal_data *cal_data = &lvts_data->cal_data;
+	struct platform_ops *ops = &lvts_data->ops;
+	int i, offset, size;
+	char buffer[512];
+
+	cal_data->count_r = devm_kcalloc(dev, lvts_data->num_sensor,
+					 sizeof(*cal_data->count_r), GFP_KERNEL);
+	if (!cal_data->count_r)
+		return -ENOMEM;
+
+	cal_data->count_rc = devm_kcalloc(dev, lvts_data->num_sensor,
+					  sizeof(*cal_data->count_rc), GFP_KERNEL);
+	if (!cal_data->count_rc)
+		return -ENOMEM;
+
+	if (ops->efuse_to_cal_data)
+		ops->efuse_to_cal_data(lvts_data);
+
+	cal_data->use_fake_efuse = 1;
+	if (cal_data->golden_temp != 0) {
+		cal_data->use_fake_efuse = 0;
+	} else {
+		for (i = 0; i < lvts_data->num_sensor; i++) {
+			if (cal_data->count_r[i] != 0 ||
+			    cal_data->count_rc[i] != 0) {
+				cal_data->use_fake_efuse = 0;
+				break;
+			}
+		}
+	}
+
+	if (cal_data->use_fake_efuse) {
+		/* It means all efuse data are equal to 0 */
+		dev_err(dev,
+			"[lvts_cal] This sample is not calibrated, fake !!\n");
+
+		cal_data->golden_temp = cal_data->default_golden_temp;
+		for (i = 0; i < lvts_data->num_sensor; i++) {
+			cal_data->count_r[i] = cal_data->default_count_r;
+			cal_data->count_rc[i] = cal_data->default_count_rc;
+		}
+	}
+
+	lvts_data->coeff.golden_temp = cal_data->golden_temp;
+
+	dev_info(dev, "[lvts_cal] golden_temp = %d\n", cal_data->golden_temp);
+
+	size = sizeof(buffer);
+	offset = snprintf(buffer, size, "[lvts_cal] num:g_count:g_count_rc ");
+	for (i = 0; i < lvts_data->num_sensor; i++)
+		offset += snprintf(buffer + offset, size - offset, "%d:%d:%d ",
+				   i, cal_data->count_r[i], cal_data->count_rc[i]);
+
+	buffer[offset] = '\0';
+	dev_info(dev, "%s\n", buffer);
+
+	return 0;
+}
+
+static int get_calibration_data(struct lvts_data *lvts_data)
+{
+	struct device *dev = lvts_data->dev;
+	char cell_name[8];
+	struct nvmem_cell *cell;
+	u32 *buf;
+	size_t len;
+	int i, j, index = 0, ret;
+
+	lvts_data->efuse = devm_kcalloc(dev, lvts_data->num_efuse_addr,
+					sizeof(*lvts_data->efuse), GFP_KERNEL);
+	if (!lvts_data->efuse)
+		return -ENOMEM;
+
+	for (i = 0; i < lvts_data->num_efuse_block; i++) {
+		snprintf(cell_name, sizeof(cell_name), "e_data%d", i + 1);
+		cell = nvmem_cell_get(dev, cell_name);
+		if (IS_ERR(cell)) {
+			dev_err(dev, "Error: Failed to get nvmem cell %s\n", cell_name);
+			return PTR_ERR(cell);
+		}
+
+		buf = (u32 *)nvmem_cell_read(cell, &len);
+		nvmem_cell_put(cell);
+
+		if (IS_ERR(buf))
+			return PTR_ERR(buf);
+
+		for (j = 0; j < (len / sizeof(u32)); j++) {
+			if (index >= lvts_data->num_efuse_addr) {
+				dev_err(dev, "Array efuse is going to overflow");
+				kfree(buf);
+				return -EINVAL;
+			}
+
+			lvts_data->efuse[index] = buf[j];
+			index++;
+		}
+
+		kfree(buf);
+	}
+
+	ret = prepare_calibration_data(lvts_data);
+
+	return ret;
+}
+
+static int of_update_lvts_data(struct lvts_data *lvts_data,
+			       struct platform_device *pdev)
+{
+	struct device *dev = lvts_data->dev;
+	struct power_domain *domain;
+	struct resource *res;
+	unsigned int i;
+	int ret;
+
+	lvts_data->clk = devm_clk_get(dev, "lvts_clk");
+	if (IS_ERR(lvts_data->clk))
+		return PTR_ERR(lvts_data->clk);
+
+	domain = devm_kcalloc(dev, lvts_data->num_domain, sizeof(*domain), GFP_KERNEL);
+	if (!domain)
+		return -ENOMEM;
+
+	for (i = 0; i < lvts_data->num_domain; i++) {
+		/* Get base address */
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!res) {
+			dev_err(dev, "No IO resource, index %d\n", i);
+			return -ENXIO;
+		}
+
+		domain[i].base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(domain[i].base)) {
+			dev_err(dev, "Failed to remap io, index %d\n", i);
+			return PTR_ERR(domain[i].base);
+		}
+
+		/* Get interrupt number */
+		res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
+		if (!res) {
+			dev_err(dev, "No irq resource, index %d\n", i);
+			return -EINVAL;
+		}
+		domain[i].irq_num = res->start;
+
+		/* Get reset control */
+		domain[i].reset = devm_reset_control_get_by_index(dev, i);
+		if (IS_ERR(domain[i].reset)) {
+			dev_err(dev, "Failed to get, index %d\n", i);
+			return PTR_ERR(domain[i].reset);
+		}
+	}
+
+	lvts_data->domain = domain;
+
+	lvts_data->sen_data = devm_kcalloc(dev, lvts_data->num_sensor,
+					   sizeof(*lvts_data->sen_data), GFP_KERNEL);
+	if (!lvts_data->sen_data)
+		return -ENOMEM;
+
+	ret = get_calibration_data(lvts_data);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void lvts_device_close(struct lvts_data *lvts_data)
+{
+	unsigned int i;
+	void __iomem *base;
+
+	for (i = 0; i < lvts_data->num_tc; i++) {
+		base = GET_BASE_ADDR(i);
+		lvts_write_device(lvts_data, RESET_ALL_DEVICES, i);
+		writel(DISABLE_LVTS_CTRL_CLK, LVTSCLKEN_0 + base);
+	}
+}
+
+static void lvts_close(struct lvts_data *lvts_data)
+{
+	disable_all_sensing_points(lvts_data);
+	wait_all_tc_sensing_point_idle(lvts_data);
+	lvts_device_close(lvts_data);
+	clk_disable_unprepare(lvts_data->clk);
+}
+
+static void tc_irq_handler(struct lvts_data *lvts_data, int tc_id)
+{
+	struct device *dev = lvts_data->dev;
+	unsigned int ret = 0;
+	void __iomem *base;
+
+	base = GET_BASE_ADDR(tc_id);
+
+	ret = readl(LVTSMONINTSTS_0 + base);
+	/* Write back to clear interrupt status */
+	writel(ret, LVTSMONINTSTS_0 + base);
+
+	dev_info(dev, "[Thermal IRQ] LVTS thermal controller %d, LVTSMONINTSTS=0x%08x\n",
+		 tc_id, ret);
+
+	if (ret & THERMAL_PROTECTION_STAGE_3)
+		dev_info(dev,
+			 "[Thermal IRQ]: Thermal protection stage 3 interrupt triggered\n");
+}
+
+static irqreturn_t irq_handler(int irq, void *dev_id)
+{
+	struct lvts_data *lvts_data = (struct lvts_data *)dev_id;
+	struct device *dev = lvts_data->dev;
+	struct tc_settings *tc = lvts_data->tc;
+	unsigned int i, *irq_bitmap;
+	void __iomem *base;
+
+	irq_bitmap = kcalloc(lvts_data->num_domain, sizeof(*irq_bitmap), GFP_ATOMIC);
+
+	if (!irq_bitmap)
+		return IRQ_NONE;
+
+	for (i = 0; i < lvts_data->num_domain; i++) {
+		base = lvts_data->domain[i].base;
+		irq_bitmap[i] = readl(THERMINTST + base);
+		dev_info(dev, "%s : THERMINTST = 0x%x\n", __func__, irq_bitmap[i]);
+	}
+
+	for (i = 0; i < lvts_data->num_tc; i++) {
+		if ((irq_bitmap[tc[i].domain_index] & tc[i].irq_bit) == 0)
+			tc_irq_handler(lvts_data, i);
+	}
+
+	kfree(irq_bitmap);
+
+	return IRQ_HANDLED;
+}
+
+static int lvts_register_irq_handler(struct lvts_data *lvts_data)
+{
+	struct device *dev = lvts_data->dev;
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < lvts_data->num_domain; i++) {
+		ret = devm_request_irq(dev, lvts_data->domain[i].irq_num, irq_handler,
+				       IRQF_TRIGGER_HIGH, "mtk_lvts", lvts_data);
+
+		if (ret) {
+			dev_err(dev, "Failed to register LVTS IRQ, ret %d, domain %d irq_num %d\n",
+				ret, i, lvts_data->domain[i].irq_num);
+			lvts_close(lvts_data);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int lvts_register_thermal_zones(struct lvts_data *lvts_data)
+{
+	struct device *dev = lvts_data->dev;
+	struct thermal_zone_device *tzdev;
+	struct soc_temp_tz *lvts_tz;
+	int i, ret;
+
+	for (i = 0; i < lvts_data->num_sensor + 1; i++) {
+		lvts_tz = devm_kzalloc(dev, sizeof(*lvts_tz), GFP_KERNEL);
+		if (!lvts_tz) {
+			lvts_close(lvts_data);
+			return -ENOMEM;
+		}
+
+		lvts_tz->id = i;
+		lvts_tz->lvts_data = lvts_data;
+
+		tzdev = devm_thermal_zone_of_sensor_register(dev, lvts_tz->id,
+							     lvts_tz, &soc_temp_lvts_ops);
+
+		if (IS_ERR(tzdev)) {
+			if (lvts_tz->id != 0)
+				return 0;
+
+			ret = PTR_ERR(tzdev);
+			dev_err(dev, "Error: Failed to register lvts tz %d, ret = %d\n",
+				lvts_tz->id, ret);
+			lvts_close(lvts_data);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int lvts_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct lvts_data *lvts_data;
+	int ret;
+
+	lvts_data = (struct lvts_data *)of_device_get_match_data(dev);
+
+	if (!lvts_data)	{
+		dev_err(dev, "Error: Failed to get lvts platform data\n");
+		return -ENODATA;
+	}
+
+	lvts_data->dev = &pdev->dev;
+
+	ret = of_update_lvts_data(lvts_data, pdev);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, lvts_data);
+
+	ret = lvts_init(lvts_data);
+	if (ret)
+		return ret;
+
+	ret = lvts_register_irq_handler(lvts_data);
+	if (ret)
+		return ret;
+
+	ret = lvts_register_thermal_zones(lvts_data);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int lvts_remove(struct platform_device *pdev)
+{
+	struct lvts_data *lvts_data;
+
+	lvts_data = (struct lvts_data *)platform_get_drvdata(pdev);
+
+	lvts_close(lvts_data);
+
+	return 0;
+}
+
+static int lvts_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct lvts_data *lvts_data;
+
+	lvts_data = (struct lvts_data *)platform_get_drvdata(pdev);
+
+	lvts_close(lvts_data);
+
+	return 0;
+}
+
+static int lvts_resume(struct platform_device *pdev)
+{
+	int ret;
+	struct lvts_data *lvts_data;
+
+	lvts_data = (struct lvts_data *)platform_get_drvdata(pdev);
+
+	ret = lvts_init(lvts_data);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+/*==================================================
+ * LVTS v4 common code
+ *==================================================
+ */
+static void device_enable_and_init_v4(struct lvts_data *lvts_data)
+{
+	unsigned int i;
+
+	for (i = 0; i < lvts_data->num_tc; i++) {
+		lvts_write_device(lvts_data, STOP_COUNTING_V4, i);
+		lvts_write_device(lvts_data, SET_RG_TSFM_LPDLY_V4, i);
+		lvts_write_device(lvts_data, SET_COUNTING_WINDOW_20US1_V4, i);
+		lvts_write_device(lvts_data, SET_COUNTING_WINDOW_20US2_V4, i);
+		lvts_write_device(lvts_data, TSV2F_CHOP_CKSEL_AND_TSV2F_EN_V4, i);
+		lvts_write_device(lvts_data, TSBG_DEM_CKSEL_X_TSBG_CHOP_EN_V4, i);
+		lvts_write_device(lvts_data, SET_TS_RSV_V4, i);
+		lvts_write_device(lvts_data, SET_TS_EN_V4, i);
+		lvts_write_device(lvts_data, TOGGLE_RG_TSV2F_VCO_RST1_V4, i);
+		lvts_write_device(lvts_data, TOGGLE_RG_TSV2F_VCO_RST2_V4, i);
+	}
+
+	lvts_data->counting_window_us = 20;
+}
+
+static void device_enable_auto_rck_v4(struct lvts_data *lvts_data)
+{
+	unsigned int i;
+
+	for (i = 0; i < lvts_data->num_tc; i++)
+		lvts_write_device(lvts_data, SET_LVTS_AUTO_RCK_V4, i);
+}
+
+static int device_read_count_rc_n_v4(struct lvts_data *lvts_data)
+{
+	/* Resistor-Capacitor Calibration */
+	/* count_RC_N: count RC now */
+	struct device *dev = lvts_data->dev;
+	struct tc_settings *tc = lvts_data->tc;
+	struct sensor_cal_data *cal_data = &lvts_data->cal_data;
+	unsigned int offset, size, s_index, data;
+	void __iomem *base;
+	int ret, i, j;
+	char buffer[512];
+
+	cal_data->count_rc_now = devm_kcalloc(dev, lvts_data->num_sensor,
+					      sizeof(*cal_data->count_rc_now), GFP_KERNEL);
+	if (!cal_data->count_rc_now)
+		return -ENOMEM;
+
+	for (i = 0; i < lvts_data->num_tc; i++) {
+		base = GET_BASE_ADDR(i);
+		for (j = 0; j < tc[i].num_sensor; j++) {
+			s_index = tc[i].sensor_map[j];
+
+			lvts_write_device(lvts_data, SELECT_SENSOR_RCK_V4(j), i);
+			lvts_write_device(lvts_data, SET_DEVICE_SINGLE_MODE_V4, i);
+			usleep_range(10, 20);
+
+			lvts_write_device(lvts_data, KICK_OFF_RCK_COUNTING_V4, i);
+			usleep_range(30, 40);
+
+			ret = readl_poll_timeout(LVTS_CONFIG_0 + base, data,
+						 !(data & DEVICE_SENSING_STATUS), 2, 200);
+			if (ret)
+				dev_err(dev,
+					"Error: LVTS %d DEVICE_SENSING_STATUS didn't ready\n", i);
+
+			data = lvts_read_device(lvts_data, 0x00, i);
+
+			cal_data->count_rc_now[s_index] = (data & GENMASK(23, 0));
+		}
+
+		/* Recover Setting for Normal Access on
+		 * temperature fetch
+		 */
+		lvts_write_device(lvts_data, SET_SENSOR_NO_RCK_V4, i);
+		lvts_write_device(lvts_data, SET_DEVICE_LOW_POWER_SINGLE_MODE_V4, i);
+	}
+
+	size = sizeof(buffer);
+	offset = snprintf(buffer, size, "[COUNT_RC_NOW] ");
+	for (i = 0; i < lvts_data->num_sensor; i++)
+		offset += snprintf(buffer + offset, size - offset, "%d:%d ",
+				   i, cal_data->count_rc_now[i]);
+
+	buffer[offset] = '\0';
+	dev_info(dev, "%s\n", buffer);
+
+	return 0;
+}
+
+static void set_calibration_data_v4(struct lvts_data *lvts_data)
+{
+	struct tc_settings *tc = lvts_data->tc;
+	struct sensor_cal_data *cal_data = &lvts_data->cal_data;
+	unsigned int i, j, s_index, e_data;
+	void __iomem *base;
+
+	for (i = 0; i < lvts_data->num_tc; i++) {
+		base = GET_BASE_ADDR(i);
+
+		for (j = 0; j < tc[i].num_sensor; j++) {
+			s_index = tc[i].sensor_map[j];
+			if (IS_ENABLE(FEATURE_DEVICE_AUTO_RCK))
+				e_data = cal_data->count_r[s_index];
+			else
+				e_data = (((unsigned long long)
+					cal_data->count_rc_now[s_index]) *
+					cal_data->count_r[s_index]) >> 14;
+
+			writel(e_data, LVTSEDATA00_0 + base + 0x4 * j);
+		}
+	}
+}
+
+static void init_controller_v4(struct lvts_data *lvts_data)
+{
+	struct device *dev = lvts_data->dev;
+	unsigned int i;
+	void __iomem *base;
+
+	for (i = 0; i < lvts_data->num_tc; i++) {
+		base = GET_BASE_ADDR(i);
+
+		lvts_write_device(lvts_data, SET_DEVICE_LOW_POWER_SINGLE_MODE_V4, i);
+
+		writel(SET_SENSOR_INDEX, LVTSTSSEL_0 + base);
+		writel(SET_CALC_SCALE_RULES, LVTSCALSCALE_0 + base);
+
+		set_polling_speed(lvts_data, i);
+		set_hw_filter(lvts_data, i);
+
+		dev_info(dev, "lvts%d: read all %d sensors in %d us, one in %d us\n",
+			 i, GET_TC_SENSOR_NUM(i), GROUP_LATENCY_US(i), SENSOR_LATENCY_US(i));
+	}
+}
+
+/*==================================================
+ * LVTS MT6873
+ *==================================================
+ */
+
+#define MT6873_NUM_LVTS (ARRAY_SIZE(mt6873_tc_settings))
+
+enum mt6873_lvts_domain {
+	MT6873_AP_DOMAIN,
+	MT6873_MCU_DOMAIN,
+	MT6873_NUM_DOMAIN
+};
+
+enum mt6873_lvts_sensor_enum {
+	MT6873_TS1_0,
+	MT6873_TS1_1,
+	MT6873_TS2_0,
+	MT6873_TS2_1,
+	MT6873_TS3_0,
+	MT6873_TS3_1,
+	MT6873_TS3_2,
+	MT6873_TS3_3,
+	MT6873_TS4_0,
+	MT6873_TS4_1,
+	MT6873_TS5_0,
+	MT6873_TS5_1,
+	MT6873_TS6_0,
+	MT6873_TS6_1,
+	MT6873_TS7_0,
+	MT6873_TS7_1,
+	MT6873_TS7_2,
+	MT6873_NUM_TS
+};
+
+static void mt6873_efuse_to_cal_data(struct lvts_data *lvts_data)
+{
+	struct sensor_cal_data *cal_data = &lvts_data->cal_data;
+
+	cal_data->golden_temp = GET_CAL_DATA_BITMASK(0, 31, 24);
+	cal_data->count_r[MT6873_TS1_0] = GET_CAL_DATA_BITMASK(1, 23, 0);
+	cal_data->count_r[MT6873_TS1_1] = GET_CAL_DATA_BITMASK(2, 23, 0);
+	cal_data->count_r[MT6873_TS2_0] = GET_CAL_DATA_BITMASK(3, 23, 0);
+	cal_data->count_r[MT6873_TS2_1] = GET_CAL_DATA_BITMASK(4, 23, 0);
+	cal_data->count_r[MT6873_TS3_0] = GET_CAL_DATA_BITMASK(5, 23, 0);
+	cal_data->count_r[MT6873_TS3_1] = GET_CAL_DATA_BITMASK(6, 23, 0);
+	cal_data->count_r[MT6873_TS3_2] = GET_CAL_DATA_BITMASK(7, 23, 0);
+	cal_data->count_r[MT6873_TS3_3] = GET_CAL_DATA_BITMASK(8, 23, 0);
+	cal_data->count_r[MT6873_TS4_0] = GET_CAL_DATA_BITMASK(9, 23, 0);
+	cal_data->count_r[MT6873_TS4_1] = GET_CAL_DATA_BITMASK(10, 23, 0);
+	cal_data->count_r[MT6873_TS5_0] = GET_CAL_DATA_BITMASK(11, 23, 0);
+	cal_data->count_r[MT6873_TS5_1] = GET_CAL_DATA_BITMASK(12, 23, 0);
+	cal_data->count_r[MT6873_TS6_0] = GET_CAL_DATA_BITMASK(13, 23, 0);
+	cal_data->count_r[MT6873_TS6_1] = GET_CAL_DATA_BITMASK(14, 23, 0);
+	cal_data->count_r[MT6873_TS7_0] = GET_CAL_DATA_BITMASK(15, 23, 0);
+	cal_data->count_r[MT6873_TS7_1] = GET_CAL_DATA_BITMASK(16, 23, 0);
+	cal_data->count_r[MT6873_TS7_2] = GET_CAL_DATA_BITMASK(17, 23, 0);
+
+	cal_data->count_rc[MT6873_TS1_0] = GET_CAL_DATA_BITMASK(21, 23, 0);
+
+	cal_data->count_rc[MT6873_TS2_0] = (GET_CAL_DATA_BITMASK(1, 31, 24) << 16) +
+					   (GET_CAL_DATA_BITMASK(2, 31, 24) << 8) +
+					    GET_CAL_DATA_BITMASK(3, 31, 24);
+
+	cal_data->count_rc[MT6873_TS3_0] = (GET_CAL_DATA_BITMASK(4, 31, 24) << 16) +
+					   (GET_CAL_DATA_BITMASK(5, 31, 24) << 8) +
+					    GET_CAL_DATA_BITMASK(6, 31, 24);
+
+	cal_data->count_rc[MT6873_TS4_0] = (GET_CAL_DATA_BITMASK(7, 31, 24) << 16) +
+					   (GET_CAL_DATA_BITMASK(8, 31, 24) << 8) +
+					    GET_CAL_DATA_BITMASK(9, 31, 24);
+
+	cal_data->count_rc[MT6873_TS5_0] = (GET_CAL_DATA_BITMASK(10, 31, 24) << 16) +
+					   (GET_CAL_DATA_BITMASK(11, 31, 24) << 8) +
+					    GET_CAL_DATA_BITMASK(12, 31, 24);
+
+	cal_data->count_rc[MT6873_TS6_0] = (GET_CAL_DATA_BITMASK(13, 31, 24) << 16) +
+					   (GET_CAL_DATA_BITMASK(14, 31, 24) << 8) +
+					    GET_CAL_DATA_BITMASK(15, 31, 24);
+
+	cal_data->count_rc[MT6873_TS7_0] = (GET_CAL_DATA_BITMASK(16, 31, 24) << 16) +
+					   (GET_CAL_DATA_BITMASK(17, 31, 24) << 8) +
+					    GET_CAL_DATA_BITMASK(18, 31, 24);
+}
+
+static struct tc_settings mt6873_tc_settings[] = {
+	[0] = {
+		.domain_index = MT6873_MCU_DOMAIN,
+		.addr_offset = 0x0,
+		.num_sensor = 2,
+		.sensor_map = {MT6873_TS1_0, MT6873_TS1_1},
+		.tc_speed = SET_TC_SPEED_IN_US(118, 118, 118, 118),
+		.hw_filter = LVTS_FILTER_2_OF_4,
+		.dominator_sensing_point = SENSING_POINT1,
+		.hw_reboot_trip_point = 117000,
+		.irq_bit = BIT(3),
+	},
+	[1] = {
+		.domain_index = MT6873_MCU_DOMAIN,
+		.addr_offset = 0x100,
+		.num_sensor = 2,
+		.sensor_map = {MT6873_TS2_0, MT6873_TS2_1},
+		.tc_speed = SET_TC_SPEED_IN_US(118, 118, 118, 118),
+		.hw_filter = LVTS_FILTER_2_OF_4,
+		.dominator_sensing_point = SENSING_POINT0,
+		.hw_reboot_trip_point = 117000,
+		.irq_bit = BIT(4),
+	},
+	[2] = {
+		.domain_index = MT6873_MCU_DOMAIN,
+		.addr_offset = 0x200,
+		.num_sensor = 4,
+		.sensor_map = {MT6873_TS3_0, MT6873_TS3_1, MT6873_TS3_2, MT6873_TS3_3},
+		.tc_speed = SET_TC_SPEED_IN_US(118, 118, 118, 118),
+		.hw_filter = LVTS_FILTER_2_OF_4,
+		.dominator_sensing_point = SENSING_POINT0,
+		.hw_reboot_trip_point = 117000,
+		.irq_bit = BIT(5),
+	},
+	[3] = {
+		.domain_index = MT6873_AP_DOMAIN,
+		.addr_offset = 0x0,
+		.num_sensor = 2,
+		.sensor_map = {MT6873_TS4_0, MT6873_TS4_1},
+		.tc_speed = SET_TC_SPEED_IN_US(118, 118, 118, 118),
+		.hw_filter = LVTS_FILTER_2_OF_4,
+		.dominator_sensing_point = SENSING_POINT0,
+		.hw_reboot_trip_point = 117000,
+		.irq_bit = BIT(3),
+	},
+	[4] = {
+		.domain_index = MT6873_AP_DOMAIN,
+		.addr_offset = 0x100,
+		.num_sensor = 2,
+		.sensor_map = {MT6873_TS5_0, MT6873_TS5_1},
+		.tc_speed = SET_TC_SPEED_IN_US(118, 118, 118, 118),
+		.hw_filter = LVTS_FILTER_2_OF_4,
+		.dominator_sensing_point = SENSING_POINT1,
+		.hw_reboot_trip_point = 117000,
+		.irq_bit = BIT(4),
+	},
+	[5] = {
+		.domain_index = MT6873_AP_DOMAIN,
+		.addr_offset = 0x200,
+		.num_sensor = 2,
+		.sensor_map = {MT6873_TS6_0, MT6873_TS6_1},
+		.tc_speed = SET_TC_SPEED_IN_US(118, 118, 118, 118),
+		.hw_filter = LVTS_FILTER_2_OF_4,
+		.dominator_sensing_point = SENSING_POINT1,
+		.hw_reboot_trip_point = 117000,
+		.irq_bit = BIT(5),
+	},
+	[6] = {
+		.domain_index = MT6873_AP_DOMAIN,
+		.addr_offset = 0x300,
+		.num_sensor = 3,
+		.sensor_map = {MT6873_TS7_0, MT6873_TS7_1, MT6873_TS7_2},
+		.tc_speed = SET_TC_SPEED_IN_US(118, 118, 118, 118),
+		.hw_filter = LVTS_FILTER_2_OF_4,
+		.dominator_sensing_point = SENSING_POINT2,
+		.hw_reboot_trip_point = 117000,
+		.irq_bit = BIT(6),
+	}
+};
+
+static struct lvts_data mt6873_lvts_data = {
+	.num_domain = MT6873_NUM_DOMAIN,
+	.num_tc = MT6873_NUM_LVTS,
+	.tc = mt6873_tc_settings,
+	.num_sensor = MT6873_NUM_TS,
+	.ops = {
+		.efuse_to_cal_data = mt6873_efuse_to_cal_data,
+		.device_enable_and_init = device_enable_and_init_v4,
+		.device_enable_auto_rck = device_enable_auto_rck_v4,
+		.device_read_count_rc_n = device_read_count_rc_n_v4,
+		.set_cal_data = set_calibration_data_v4,
+		.init_controller = init_controller_v4,
+	},
+	.feature_bitmap = FEATURE_DEVICE_AUTO_RCK,
+	.num_efuse_addr = 22,
+	.num_efuse_block = 1,
+	.cal_data = {
+		.default_golden_temp = 50,
+		.default_count_r = 35000,
+		.default_count_rc = 2750,
+	},
+	.coeff = {
+		.a = -250460,
+		.b = 250460,
+	},
+};
+
+/*==================================================
+ *==================================================
+ * Support chips
+ *==================================================
+ */
+static const struct of_device_id lvts_of_match[] = {
+	{
+		.compatible = "mediatek,mt6873-lvts",
+		.data = (void *)&mt6873_lvts_data,
+	},
+	{
+	},
+};
+MODULE_DEVICE_TABLE(of, lvts_of_match);
+/*==================================================*/
+static struct platform_driver soc_temp_lvts = {
+	.probe = lvts_probe,
+	.remove = lvts_remove,
+	.suspend = lvts_suspend,
+	.resume = lvts_resume,
+	.driver = {
+		.name = "mtk-soc-temp-lvts",
+		.of_match_table = lvts_of_match,
+	},
+};
+
+module_platform_driver(soc_temp_lvts);
+MODULE_AUTHOR("Yu-Chia Chang <ethan.chang@mediatek.com>");
+MODULE_AUTHOR("Michael Kao <michael.kao@mediatek.com>");
+MODULE_DESCRIPTION("Mediatek soc temperature driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/mediatek/soc_temp_lvts.h b/drivers/thermal/mediatek/soc_temp_lvts.h
new file mode 100644
index 000000000000..1d90bdec53c6
--- /dev/null
+++ b/drivers/thermal/mediatek/soc_temp_lvts.h
@@ -0,0 +1,312 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ */
+
+#ifndef __MTK_SOC_TEMP_LVTS_H__
+#define __MTK_SOC_TEMP_LVTS_H__
+
+/* LVTS HW filter settings
+ * 000: Get one sample
+ * 001: Get 2 samples and average them
+ * 010: Get 4 samples, drop max and min, then average the rest of 2 samples
+ * 011: Get 6 samples, drop max and min, then average the rest of 4 samples
+ * 100: Get 10 samples, drop max and min, then average the rest of 8 samples
+ * 101: Get 18 samples, drop max and min, then average the rest of 16 samples
+ */
+enum lvts_hw_filter {
+	LVTS_FILTER_1,
+	LVTS_FILTER_2,
+	LVTS_FILTER_2_OF_4,
+	LVTS_FILTER_4_OF_6,
+	LVTS_FILTER_8_OF_10,
+	LVTS_FILTER_16_OF_18
+};
+
+enum lvts_sensing_point {
+	SENSING_POINT0,
+	SENSING_POINT1,
+	SENSING_POINT2,
+	SENSING_POINT3,
+	ALL_SENSING_POINTS
+};
+
+/*==================================================
+ * Data structure
+ *==================================================
+ */
+struct lvts_data;
+
+struct speed_settings {
+	unsigned int period_unit;
+	unsigned int group_interval_delay;
+	unsigned int filter_interval_delay;
+	unsigned int sensor_interval_delay;
+};
+
+struct tc_settings {
+	unsigned int domain_index;
+	unsigned int addr_offset;
+	unsigned int num_sensor;
+	unsigned int sensor_map[ALL_SENSING_POINTS]; /* In sensor ID */
+	struct speed_settings tc_speed;
+	/* HW filter setting
+	 * 000: Get one sample
+	 * 001: Get 2 samples and average them
+	 * 010: Get 4 samples, drop max and min, then average the rest of 2 samples
+	 * 011: Get 6 samples, drop max and min, then average the rest of 4 samples
+	 * 100: Get 10 samples, drop max and min, then average the rest of 8 samples
+	 * 101: Get 18 samples, drop max and min, then average the rest of 16 samples
+	 */
+	unsigned int hw_filter;
+	/* Dominator_sensing point is used to select a sensing point
+	 * and reference its temperature to trigger Thermal HW Reboot
+	 * When it is ALL_SENSING_POINTS, it will select all sensing points
+	 */
+	int dominator_sensing_point;
+	int hw_reboot_trip_point; /* -274000: Disable HW reboot */
+	unsigned int irq_bit;
+};
+
+struct formula_coeff {
+	int a;
+	int b;
+	unsigned int golden_temp;
+};
+
+struct sensor_cal_data {
+	int use_fake_efuse;	/* 1: Use fake efuse, 0: Use real efuse */
+	unsigned int golden_temp;
+	unsigned int *count_r;
+	unsigned int *count_rc;
+	unsigned int *count_rc_now;
+
+	unsigned int default_golden_temp;
+	unsigned int default_count_r;
+	unsigned int default_count_rc;
+};
+
+struct platform_ops {
+	void (*efuse_to_cal_data)(struct lvts_data *lvts_data);
+	void (*device_enable_and_init)(struct lvts_data *lvts_data);
+	void (*device_enable_auto_rck)(struct lvts_data *lvts_data);
+	int (*device_read_count_rc_n)(struct lvts_data *lvts_data);
+	void (*set_cal_data)(struct lvts_data *lvts_data);
+	void (*init_controller)(struct lvts_data *lvts_data);
+};
+
+struct power_domain {
+	void __iomem *base;	/* LVTS base addresses */
+	unsigned int irq_num;	/* LVTS interrupt numbers */
+	struct reset_control *reset;
+};
+
+struct sensor_data {
+	int temp;		/* Current temperature */
+	unsigned int msr_raw;	/* MSR raw data from LVTS */
+};
+
+struct lvts_data {
+	struct device *dev;
+	struct clk *clk;
+	unsigned int num_domain;
+	struct power_domain *domain;
+
+	int num_tc;			/* Number of LVTS thermal controllers */
+	struct tc_settings *tc;
+	int counting_window_us;		/* LVTS device counting window */
+
+	int num_sensor;			/* Number of sensors in this platform */
+	struct sensor_data *sen_data;
+
+	struct platform_ops ops;
+	int feature_bitmap;		/* Show what features are enabled */
+
+	unsigned int num_efuse_addr;
+	unsigned int *efuse;
+	unsigned int num_efuse_block;	/* Number of contiguous efuse indexes */
+	struct sensor_cal_data cal_data;
+	struct formula_coeff coeff;
+};
+
+struct soc_temp_tz {
+	unsigned int id; /* if id is 0, get max temperature of all sensors */
+	struct lvts_data *lvts_data;
+};
+
+struct match_entry {
+	char	chip[32];
+	struct lvts_data *lvts_data;
+};
+
+struct lvts_match_data {
+	unsigned int hw_version;
+	struct match_entry *table;
+	void (*set_up_common_callbacks)(struct lvts_data *lvts_data);
+	struct list_head node;
+};
+
+struct lvts_id {
+	unsigned int hw_version;
+	char	chip[32];
+};
+
+/*==================================================
+ * LVTS device register
+ *==================================================
+ */
+#define RG_TSFM_DATA_0	0x00
+#define RG_TSFM_DATA_1	0x01
+#define RG_TSFM_DATA_2	0x02
+#define RG_TSFM_CTRL_0	0x03
+#define RG_TSFM_CTRL_1	0x04
+#define RG_TSFM_CTRL_2	0x05
+#define RG_TSFM_CTRL_3	0x06
+#define RG_TSFM_CTRL_4	0x07
+#define RG_TSV2F_CTRL_0	0x08
+#define RG_TSV2F_CTRL_1	0x09
+#define RG_TSV2F_CTRL_2	0x0A
+#define RG_TSV2F_CTRL_3	0x0B
+#define RG_TSV2F_CTRL_4	0x0C
+#define RG_TSV2F_CTRL_5	0x0D
+#define RG_TSV2F_CTRL_6	0x0E
+#define RG_TEMP_DATA_0	0x10
+#define RG_TEMP_DATA_1	0x11
+#define RG_TEMP_DATA_2	0x12
+#define RG_TEMP_DATA_3	0x13
+#define RG_RC_DATA_0	0x14
+#define RG_RC_DATA_1	0x15
+#define RG_RC_DATA_2	0x16
+#define RG_RC_DATA_3	0x17
+#define RG_DIV_DATA_0	0x18
+#define RG_DIV_DATA_1	0x19
+#define RG_DIV_DATA_2	0x1A
+#define RG_DIV_DATA_3	0x1B
+#define RG_TST_DATA_0	0x70
+#define RG_TST_DATA_1	0x71
+#define RG_TST_DATA_2	0x72
+#define RG_TST_CTRL	0x73
+#define RG_DBG_FQMTR	0xF0
+#define RG_DBG_LPSEQ	0xF1
+#define RG_DBG_STATE	0xF2
+#define RG_DBG_CHKSUM	0xF3
+#define RG_DID_LVTS	0xFC
+#define RG_DID_REV	0xFD
+#define RG_TSFM_RST	0xFF
+/*==================================================
+ * LVTS controller register
+ *==================================================
+ */
+#define LVTSMONCTL0_0	0x000
+#define LVTS_SINGLE_SENSE	BIT(9)
+#define ENABLE_SENSING_POINT(num)	(LVTS_SINGLE_SENSE | GENMASK(((num) - 1), 0))
+#define DISABLE_SENSING_POINT	(LVTS_SINGLE_SENSE | 0x0)
+#define LVTSMONCTL1_0	0x004
+#define LVTSMONCTL2_0	0x008
+#define LVTSMONINT_0	0x00C
+#define STAGE3_INT_EN	BIT(31)
+#define LVTSMONINTSTS_0	0x010
+#define LVTSMONIDET0_0	0x014
+#define LVTSMONIDET1_0	0x018
+#define LVTSMONIDET2_0	0x01C
+#define LVTSMONIDET3_0	0x020
+#define LVTSH2NTHRE_0	0x024
+#define LVTSHTHRE_0	0x028
+#define LVTSCTHRE_0	0x02C
+#define LVTSOFFSETH_0	0x030
+#define LVTSOFFSETL_0	0x034
+#define LVTSMSRCTL0_0	0x038
+#define LVTSMSRCTL1_0	0x03C
+#define LVTSTSSEL_0	0x040
+#define SET_SENSOR_INDEX	0x13121110
+#define LVTSDEVICETO_0	0x044
+#define LVTSCALSCALE_0	0x048
+#define SET_CALC_SCALE_RULES	0x00000300
+#define LVTS_ID_0	0x04C
+#define LVTS_CONFIG_0	0x050
+
+#define BROADCAST_ID_UPDATE	BIT(26)
+#define DEVICE_SENSING_STATUS	BIT(25)
+#define DEVICE_ACCESS_STARTUS	BIT(24)
+#define WRITE_ACCESS		BIT(16)
+#define DEVICE_WRITE		(BIT(31) | CK26M_ACTIVE | DEVICE_ACCESS_STARTUS \
+				| BIT(17) | WRITE_ACCESS)
+#define DEVICE_READ		(BIT(31) | CK26M_ACTIVE | DEVICE_ACCESS_STARTUS \
+				| 1 << 17)
+#define RESET_ALL_DEVICES	(DEVICE_WRITE | RG_TSFM_RST << 8 | 0xFF)
+#define READ_BACK_DEVICE_ID	(BIT(31) | CK26M_ACTIVE | BROADCAST_ID_UPDATE	\
+				| DEVICE_ACCESS_STARTUS | BIT(17)	\
+				| RG_DID_LVTS << 8)
+#define READ_DEVICE_REG(reg_idx)	(DEVICE_READ | (reg_idx) << 8 | 0x00)
+#define LVTSEDATA00_0	0x054
+#define LVTSEDATA01_0	0x058
+#define LVTSEDATA02_0	0x05C
+#define LVTSEDATA03_0	0x060
+#define LVTSMSR0_0	0x090
+#define MRS_RAW_MASK		GENMASK(15, 0)
+#define MRS_RAW_VALID_BIT	BIT(16)
+#define LVTSMSR1_0	0x094
+#define LVTSMSR2_0	0x098
+#define LVTSMSR3_0	0x09C
+#define LVTSIMMD0_0	0x0A0
+#define LVTSIMMD1_0	0x0A4
+#define LVTSIMMD2_0	0x0A8
+#define LVTSIMMD3_0	0x0AC
+#define LVTSRDATA0_0	0x0B0
+#define LVTSRDATA1_0	0x0B4
+#define LVTSRDATA2_0	0x0B8
+#define LVTSRDATA3_0	0x0BC
+#define LVTSPROTCTL_0	0x0C0
+#define PROTOFFSET	GENMASK(15, 0)
+#define LVTSPROTTA_0	0x0C4
+#define LVTSPROTTB_0	0x0C8
+#define LVTSPROTTC_0	0x0CC
+#define LVTSCLKEN_0	0x0E4
+#define ENABLE_LVTS_CTRL_CLK	(1)
+#define DISABLE_LVTS_CTRL_CLK	(0)
+#define LVTSDBGSEL_0	0x0E8
+#define LVTSDBGSIG_0	0x0EC
+#define LVTSSPARE0_0	0x0F0
+#define LVTSSPARE1_0	0x0F4
+#define LVTSSPARE2_0	0x0F8
+#define LVTSSPARE3_0	0x0FC
+
+#define THERMINTST	0xF04
+/*==================================================
+ * LVTS register mask
+ *==================================================
+ */
+#define THERMAL_COLD_INTERRUPT_0		0x00000001
+#define THERMAL_HOT_INTERRUPT_0			0x00000002
+#define THERMAL_LOW_OFFSET_INTERRUPT_0		0x00000004
+#define THERMAL_HIGH_OFFSET_INTERRUPT_0		0x00000008
+#define THERMAL_HOT2NORMAL_INTERRUPT_0		0x00000010
+#define THERMAL_COLD_INTERRUPT_1		0x00000020
+#define THERMAL_HOT_INTERRUPT_1			0x00000040
+#define THERMAL_LOW_OFFSET_INTERRUPT_1		0x00000080
+#define THERMAL_HIGH_OFFSET_INTERRUPT_1		0x00000100
+#define THERMAL_HOT2NORMAL_INTERRUPT_1		0x00000200
+#define THERMAL_COLD_INTERRUPT_2		0x00000400
+#define THERMAL_HOT_INTERRUPT_2			0x00000800
+#define THERMAL_LOW_OFFSET_INTERRUPT_2		0x00001000
+#define THERMAL_HIGH_OFFSET_INTERRUPT_2		0x00002000
+#define THERMAL_HOT2NORMAL_INTERRUPT_2		0x00004000
+#define THERMAL_AHB_TIMEOUT_INTERRUPT		0x00008000
+#define THERMAL_DEVICE_TIMEOUT_INTERRUPT	0x00008000
+#define THERMAL_IMMEDIATE_INTERRUPT_0		0x00010000
+#define THERMAL_IMMEDIATE_INTERRUPT_1		0x00020000
+#define THERMAL_IMMEDIATE_INTERRUPT_2		0x00040000
+#define THERMAL_FILTER_INTERRUPT_0		0x00080000
+#define THERMAL_FILTER_INTERRUPT_1		0x00100000
+#define THERMAL_FILTER_INTERRUPT_2		0x00200000
+#define THERMAL_COLD_INTERRUPT_3		0x00400000
+#define THERMAL_HOT_INTERRUPT_3			0x00800000
+#define THERMAL_LOW_OFFSET_INTERRUPT_3		0x01000000
+#define THERMAL_HIGH_OFFSET_INTERRUPT_3		0x02000000
+#define THERMAL_HOT2NORMAL_INTERRUPT_3		0x04000000
+#define THERMAL_IMMEDIATE_INTERRUPT_3		0x08000000
+#define THERMAL_FILTER_INTERRUPT_3		0x10000000
+#define THERMAL_PROTECTION_STAGE_1		0x20000000
+#define THERMAL_PROTECTION_STAGE_2		0x40000000
+#define THERMAL_PROTECTION_STAGE_3		0x80000000
+#endif /* __MTK_SOC_TEMP_LVTS_H__ */
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [v3, 3/3] dt-bindings: thermal: Add binding document for mt6873 thermal controller
  2021-03-12  3:40 [v3,0/3] thermal: mediatek: Add LVTS architecture thermal controller Michael Kao
  2021-03-12  3:40 ` [v3,1/3] thermal: mediatek: Relocate driver to mediatek folder Michael Kao
  2021-03-12  3:40 ` [v3,2/3] thermal: mediatek: Add LVTS drivers for SoC theraml zones Michael Kao
@ 2021-03-12  3:40 ` Michael Kao
  2021-03-23 20:20   ` Rob Herring
  2 siblings, 1 reply; 11+ messages in thread
From: Michael Kao @ 2021-03-12  3:40 UTC (permalink / raw)
  To: michael.kao, Zhang Rui, Daniel Lezcano, linux-pm, srv_heupstream
  Cc: Eduardo Valentin, Rob Herring, Mark Rutland, Matthias Brugger,
	hsinyi, devicetree, linux-kernel, linux-arm-kernel,
	linux-mediatek

This patch adds binding document for mt6873 thermal controller.

Signed-off-by: Michael Kao <michael.kao@mediatek.com>
---
This patch depends on [1].

[1]https://patchwork.kernel.org/project/linux-mediatek/cover/1608642587-15634-1-git-send-email-weiyi.lu@mediatek.com/
---
 .../thermal/mediatek-thermal-lvts.yaml        | 81 +++++++++++++++++++
 1 file changed, 81 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml

diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml b/Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml
new file mode 100644
index 000000000000..0c6535abeb81
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/mediatek-thermal-lvts.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek SoC LVTS thermal controller (DTS) binding
+
+maintainers:
+  - Yu-Chia Chang <ethan.chang@mediatek.com>
+  - Michael Kao <michael.kao@mediatek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt6873-lvts
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: lvts_clk
+
+  "#thermal-sensor-cells":
+    const: 0
+
+required:
+  - "#thermal-sensor-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/thermal/thermal.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8192-clk.h>
+    dts: lvts@1100b000 {
+        compatible = "mediatek,mt6873-lvts";
+        reg = <0x1100b000 0x1000>;
+        clocks = <&infracfg CLK_INFRA_THERM>;
+        clock-names = "lvts_clk";
+        #thermal-sensor-cells = <0>;
+        interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+    thermal-zones {
+        cpu_thermal: cpu-thermal {
+            polling-delay-passive = <0>;
+            polling-delay = <0>;
+
+            thermal-sensors = <&dts>;
+            trips {
+                cpu_alert1: cpu-alert1 {
+                    temperature = <85000>;
+                    hysteresis = <0>;
+                    type = "passive";
+                };
+
+                cpu_crit: cpu-crit {
+                    temperature = <120000>;
+                    hysteresis = <0>;
+                    type = "critical";
+                };
+            };
+
+            cooling-maps {
+            };
+        };
+    };
+...
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [v3, 3/3] dt-bindings: thermal: Add binding document for mt6873 thermal controller
  2021-03-12  3:40 ` [v3, 3/3] dt-bindings: thermal: Add binding document for mt6873 thermal controller Michael Kao
@ 2021-03-23 20:20   ` Rob Herring
  0 siblings, 0 replies; 11+ messages in thread
From: Rob Herring @ 2021-03-23 20:20 UTC (permalink / raw)
  To: Michael Kao
  Cc: Mark Rutland, linux-kernel, linux-arm-kernel, linux-mediatek,
	Matthias Brugger, hsinyi, Zhang Rui, devicetree, Daniel Lezcano,
	Eduardo Valentin, linux-pm, Rob Herring, srv_heupstream

On Fri, 12 Mar 2021 11:40:18 +0800, Michael Kao wrote:
> This patch adds binding document for mt6873 thermal controller.
> 
> Signed-off-by: Michael Kao <michael.kao@mediatek.com>
> ---
> This patch depends on [1].
> 
> [1]https://patchwork.kernel.org/project/linux-mediatek/cover/1608642587-15634-1-git-send-email-weiyi.lu@mediatek.com/
> ---
>  .../thermal/mediatek-thermal-lvts.yaml        | 81 +++++++++++++++++++
>  1 file changed, 81 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [v3,1/3] thermal: mediatek: Relocate driver to mediatek folder
  2021-03-12  3:40 ` [v3,1/3] thermal: mediatek: Relocate driver to mediatek folder Michael Kao
@ 2021-04-07  9:08   ` Michael Kao
  2021-04-07  9:10     ` Daniel Lezcano
  2021-04-20 21:22   ` Daniel Lezcano
  1 sibling, 1 reply; 11+ messages in thread
From: Michael Kao @ 2021-04-07  9:08 UTC (permalink / raw)
  To: Zhang Rui, Daniel Lezcano
  Cc: linux-pm, srv_heupstream, Eduardo Valentin, Rob Herring,
	Mark Rutland, Matthias Brugger, hsinyi, devicetree, linux-kernel,
	linux-arm-kernel, linux-mediatek

Hi Maintainers,
 
Gentle pin for this patch.
 
Thanks


On Fri, 2021-03-12 at 11:40 +0800, Michael Kao wrote:
> Add Mediatek proprietary folder to upstream more thermal zone and cooler
> drivers. Relocate the original thermal controller driver to it and rename
> as soc_temp.c to show its purpose more clearly.
> 
> Signed-off-by: Michael Kao <michael.kao@mediatek.com>
> ---
>  drivers/thermal/Kconfig                       | 14 ++++-------
>  drivers/thermal/Makefile                      |  2 +-
>  drivers/thermal/mediatek/Kconfig              | 23 +++++++++++++++++++
>  drivers/thermal/mediatek/Makefile             |  1 +
>  .../{mtk_thermal.c => mediatek/soc_temp.c}    |  0
>  5 files changed, 29 insertions(+), 11 deletions(-)
>  create mode 100644 drivers/thermal/mediatek/Kconfig
>  create mode 100644 drivers/thermal/mediatek/Makefile
>  rename drivers/thermal/{mtk_thermal.c => mediatek/soc_temp.c} (100%)
> 
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 7edc8dc6bbab..b2da0a1bda34 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -401,16 +401,10 @@ config DA9062_THERMAL
>  	  zone.
>  	  Compatible with the DA9062 and DA9061 PMICs.
>  
> -config MTK_THERMAL
> -	tristate "Temperature sensor driver for mediatek SoCs"
> -	depends on ARCH_MEDIATEK || COMPILE_TEST
> -	depends on HAS_IOMEM
> -	depends on NVMEM || NVMEM=n
> -	depends on RESET_CONTROLLER
> -	default y
> -	help
> -	  Enable this option if you want to have support for thermal management
> -	  controller present in Mediatek SoCs
> +menu "Mediatek thermal drivers"
> +depends on ARCH_MEDIATEK || COMPILE_TEST
> +source "drivers/thermal/mediatek/Kconfig"
> +endmenu
>  
>  config AMLOGIC_THERMAL
>  	tristate "Amlogic Thermal Support"
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index b64dd50a6629..f9e07c3f529e 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -55,7 +55,7 @@ obj-y				+= st/
>  obj-$(CONFIG_QCOM_TSENS)	+= qcom/
>  obj-y				+= tegra/
>  obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
> -obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o
> +obj-$(CONFIG_MTK_THERMAL)	+= mediatek/
>  obj-$(CONFIG_GENERIC_ADC_THERMAL)	+= thermal-generic-adc.o
>  obj-$(CONFIG_ZX2967_THERMAL)	+= zx2967_thermal.o
>  obj-$(CONFIG_UNIPHIER_THERMAL)	+= uniphier_thermal.o
> diff --git a/drivers/thermal/mediatek/Kconfig b/drivers/thermal/mediatek/Kconfig
> new file mode 100644
> index 000000000000..0351e73170b7
> --- /dev/null
> +++ b/drivers/thermal/mediatek/Kconfig
> @@ -0,0 +1,23 @@
> +config MTK_THERMAL
> +	tristate "Mediatek thermal drivers"
> +	depends on THERMAL_OF
> +	help
> +	  This is the option for Mediatek thermal software
> +	  solutions. Please enable corresponding options to
> +	  get temperature information from thermal sensors or
> +	  turn on throttle mechaisms for thermal mitigation.
> +
> +if MTK_THERMAL
> +
> +config MTK_SOC_THERMAL
> +	tristate "Temperature sensor driver for mediatek SoCs"
> +	depends on HAS_IOMEM
> +	depends on NVMEM
> +	depends on RESET_CONTROLLER
> +	help
> +	  Enable this option if you want to get SoC temperature
> +	  information for Mediatek platforms. This driver
> +	  configures thermal controllers to collect temperature
> +	  via AUXADC interface.
> +
> +endif
> diff --git a/drivers/thermal/mediatek/Makefile b/drivers/thermal/mediatek/Makefile
> new file mode 100644
> index 000000000000..f75313ddce5e
> --- /dev/null
> +++ b/drivers/thermal/mediatek/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_MTK_SOC_THERMAL)	+= soc_temp.o
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mediatek/soc_temp.c
> similarity index 100%
> rename from drivers/thermal/mtk_thermal.c
> rename to drivers/thermal/mediatek/soc_temp.c

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [v3,2/3] thermal: mediatek: Add LVTS drivers for SoC theraml zones
  2021-03-12  3:40 ` [v3,2/3] thermal: mediatek: Add LVTS drivers for SoC theraml zones Michael Kao
@ 2021-04-07  9:09   ` Michael Kao
  0 siblings, 0 replies; 11+ messages in thread
From: Michael Kao @ 2021-04-07  9:09 UTC (permalink / raw)
  To: Zhang Rui, Daniel Lezcano
  Cc: linux-pm, srv_heupstream, Eduardo Valentin, Rob Herring,
	Mark Rutland, Matthias Brugger, hsinyi, devicetree, linux-kernel,
	linux-arm-kernel, linux-mediatek

Hi Maintainers,
 
Gentle pin for this patch.
 
Thanks


On Fri, 2021-03-12 at 11:40 +0800, Michael Kao wrote:
> Add a LVTS (Low voltage thermal sensor) driver to report junction
> temperatures in Mediatek SoC and register the maximum temperature
> of sensors and each sensor as a thermal zone.
> 
> Signed-off-by: Yu-Chia Chang <ethan.chang@mediatek.com>
> Signed-off-by: Michael Kao <michael.kao@mediatek.com>
> ---
>  drivers/thermal/mediatek/Kconfig         |   10 +
>  drivers/thermal/mediatek/Makefile        |    1 +
>  drivers/thermal/mediatek/soc_temp_lvts.c | 1287 ++++++++++++++++++++++
>  drivers/thermal/mediatek/soc_temp_lvts.h |  312 ++++++
>  4 files changed, 1610 insertions(+)
>  create mode 100644 drivers/thermal/mediatek/soc_temp_lvts.c
>  create mode 100644 drivers/thermal/mediatek/soc_temp_lvts.h
> 
> diff --git a/drivers/thermal/mediatek/Kconfig b/drivers/thermal/mediatek/Kconfig
> index 0351e73170b7..d716d0372e1e 100644
> --- a/drivers/thermal/mediatek/Kconfig
> +++ b/drivers/thermal/mediatek/Kconfig
> @@ -20,4 +20,14 @@ config MTK_SOC_THERMAL
>  	  configures thermal controllers to collect temperature
>  	  via AUXADC interface.
>  
> +config MTK_SOC_THERMAL_LVTS
> +        tristate "LVTS (Low voltage thermal sensor) driver for Mediatek SoCs"
> +        depends on HAS_IOMEM
> +        depends on NVMEM
> +        depends on RESET_TI_SYSCON
> +        help
> +          Enable this option if you want to get SoC temperature
> +          information for Mediatek platforms. This driver
> +          configures LVTS thermal controllers to collect temperatures
> +          via Analog Serial Interface(ASIF).
>  endif
> diff --git a/drivers/thermal/mediatek/Makefile b/drivers/thermal/mediatek/Makefile
> index f75313ddce5e..16ce166e5916 100644
> --- a/drivers/thermal/mediatek/Makefile
> +++ b/drivers/thermal/mediatek/Makefile
> @@ -1 +1,2 @@
>  obj-$(CONFIG_MTK_SOC_THERMAL)	+= soc_temp.o
> +obj-$(CONFIG_MTK_SOC_THERMAL_LVTS)	+= soc_temp_lvts.o
> diff --git a/drivers/thermal/mediatek/soc_temp_lvts.c b/drivers/thermal/mediatek/soc_temp_lvts.c
> new file mode 100644
> index 000000000000..8153edaaf815
> --- /dev/null
> +++ b/drivers/thermal/mediatek/soc_temp_lvts.c
> @@ -0,0 +1,1287 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2020 MediaTek Inc.
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/nvmem-consumer.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/slab.h>
> +#include <linux/string.h>
> +#include <linux/thermal.h>
> +#include "soc_temp_lvts.h"
> +
> +/*==================================================
> + * Definition or macro function
> + *==================================================
> + */
> +#define STOP_COUNTING_V4 (DEVICE_WRITE | RG_TSFM_CTRL_0 << 8 | 0x00)
> +#define SET_RG_TSFM_LPDLY_V4 (DEVICE_WRITE | RG_TSFM_CTRL_4 << 8 | 0xA6)
> +#define SET_COUNTING_WINDOW_20US1_V4 (DEVICE_WRITE | RG_TSFM_CTRL_2 << 8 | 0x00)
> +#define SET_COUNTING_WINDOW_20US2_V4 (DEVICE_WRITE | RG_TSFM_CTRL_1 << 8 | 0x20)
> +#define TSV2F_CHOP_CKSEL_AND_TSV2F_EN_V4 (DEVICE_WRITE | RG_TSV2F_CTRL_2 << 8 | 0x84)
> +#define TSBG_DEM_CKSEL_X_TSBG_CHOP_EN_V4 (DEVICE_WRITE | RG_TSV2F_CTRL_4 << 8 | 0x7C)
> +#define SET_TS_RSV_V4 (DEVICE_WRITE | RG_TSV2F_CTRL_1 << 8 | 0x8D)
> +#define SET_TS_EN_V4 (DEVICE_WRITE | RG_TSV2F_CTRL_0 << 8 | 0xF4)
> +#define TOGGLE_RG_TSV2F_VCO_RST1_V4 (DEVICE_WRITE | RG_TSV2F_CTRL_0 << 8 | 0xFC)
> +#define TOGGLE_RG_TSV2F_VCO_RST2_V4 (DEVICE_WRITE | RG_TSV2F_CTRL_0 << 8 | 0xF4)
> +
> +#define SET_LVTS_AUTO_RCK_V4 (DEVICE_WRITE | RG_TSV2F_CTRL_6 << 8 | 0x01)
> +#define SELECT_SENSOR_RCK_V4(id) (DEVICE_WRITE | RG_TSV2F_CTRL_5 << 8 | (id))
> +#define SET_DEVICE_SINGLE_MODE_V4 (DEVICE_WRITE | RG_TSFM_CTRL_3 << 8 | 0x78)
> +#define KICK_OFF_RCK_COUNTING_V4 (DEVICE_WRITE | RG_TSFM_CTRL_0 << 8 | 0x02)
> +#define SET_SENSOR_NO_RCK_V4 (DEVICE_WRITE | RG_TSV2F_CTRL_5 << 8 | 0x10)
> +#define SET_DEVICE_LOW_POWER_SINGLE_MODE_V4 (DEVICE_WRITE | RG_TSFM_CTRL_3 << 8	| 0xB8)
> +
> +#define ENABLE_FEATURE(feature)		(lvts_data->feature_bitmap |= (feature))
> +#define DISABLE_FEATURE(feature)	(lvts_data->feature_bitmap &= (~(feature)))
> +#define IS_ENABLE(feature)		(lvts_data->feature_bitmap & (feature))
> +
> +#define DISABLE_THERMAL_HW_REBOOT (-274000)
> +
> +#define CLOCK_26MHZ_CYCLE_NS	(38)
> +#define BUS_ACCESS_US		(2)
> +
> +#define FEATURE_DEVICE_AUTO_RCK	(BIT(0))
> +#define FEATURE_CK26M_ACTIVE	(BIT(1))
> +#define CK26M_ACTIVE   (((lvts_data->feature_bitmap & FEATURE_CK26M_ACTIVE)    \
> +			? 1 : 0) << 30)
> +#define GET_BASE_ADDR(tc_id)	\
> +	(lvts_data->domain[lvts_data->tc[tc_id].domain_index].base	\
> +	+ lvts_data->tc[tc_id].addr_offset)
> +
> +#define SET_TC_SPEED_IN_US(pu, gd, fd, sd) \
> +	{	\
> +		.period_unit = (((pu) * 1000) / (256 * CLOCK_26MHZ_CYCLE_NS)),	\
> +		.group_interval_delay = ((gd) / (pu)),	\
> +		.filter_interval_delay = ((fd) / (pu)),	\
> +		.sensor_interval_delay = ((sd) / (pu)),	\
> +	}
> +
> +#define GET_CAL_DATA_BITMASK(index, h, l)	\
> +	(((index) < lvts_data->num_efuse_addr)	\
> +	? ((lvts_data->efuse[(index)] & GENMASK(h, l)) >> l)	\
> +	: 0)
> +
> +#define GET_CAL_DATA_BIT(index, bit)	\
> +	(((index) < lvts_data->num_efuse_addr)	\
> +	? ((lvts_data->efuse[index] & BIT(bit)) >> (bit))	\
> +	: 0)
> +
> +#define GET_TC_SENSOR_NUM(tc_id)	\
> +	(lvts_data->tc[tc_id].num_sensor)
> +
> +#define ONE_SAMPLE (lvts_data->counting_window_us + 2 * BUS_ACCESS_US)
> +
> +#define NUM_OF_SAMPLE(tc_id)	\
> +	((lvts_data->tc[tc_id].hw_filter < LVTS_FILTER_2) ? 1 :	\
> +	((lvts_data->tc[tc_id].hw_filter > LVTS_FILTER_16_OF_18) ? 1 :	\
> +	((lvts_data->tc[tc_id].hw_filter == LVTS_FILTER_16_OF_18) ? 18 :\
> +	((lvts_data->tc[tc_id].hw_filter == LVTS_FILTER_8_OF_10) ? 10 :	\
> +	(lvts_data->tc[tc_id].hw_filter * 2)))))
> +
> +#define PERIOD_UNIT_US(tc_id)	\
> +	((lvts_data->tc[tc_id].tc_speed.period_unit * 256 *	\
> +	CLOCK_26MHZ_CYCLE_NS) / 1000)
> +#define FILTER_INT_US(tc_id)	\
> +	(lvts_data->tc[tc_id].tc_speed.filter_interval_delay	\
> +	* PERIOD_UNIT_US(tc_id))
> +#define SENSOR_INT_US(tc_id)	\
> +	(lvts_data->tc[tc_id].tc_speed.sensor_interval_delay	\
> +	* PERIOD_UNIT_US(tc_id))
> +#define GROUP_INT_US(tc_id)	\
> +	(lvts_data->tc[tc_id].tc_speed.group_interval_delay	\
> +	* PERIOD_UNIT_US(tc_id))
> +
> +#define SENSOR_LATENCY_US(tc_id) \
> +	((NUM_OF_SAMPLE(tc_id) - 1) * FILTER_INT_US(tc_id)	\
> +	+ NUM_OF_SAMPLE(tc_id) * ONE_SAMPLE)
> +
> +#define GROUP_LATENCY_US(tc_id)	\
> +	(GET_TC_SENSOR_NUM(tc_id) * SENSOR_LATENCY_US(tc_id)	\
> +	+ (GET_TC_SENSOR_NUM(tc_id) - 1) * SENSOR_INT_US(tc_id)	\
> +	+ GROUP_INT_US(tc_id))
> +
> +/*==================================================
> + * LVTS local common code
> + *==================================================
> + */
> +static int lvts_raw_to_temp(struct formula_coeff *co, unsigned int msr_raw)
> +{
> +	/* This function returns degree mC */
> +
> +	int temp;
> +
> +	temp = (co->a * ((unsigned long long)msr_raw)) >> 14;
> +	temp = temp + co->golden_temp * 500 + co->b;
> +
> +	return temp;
> +}
> +
> +static unsigned int lvts_temp_to_raw(struct formula_coeff *co, int temp)
> +{
> +	unsigned int msr_raw;
> +
> +	msr_raw = div_s64((s64)((co->golden_temp * 500 + co->b - temp)) << 14,
> +			 (-1 * co->a));
> +
> +	return msr_raw;
> +}
> +
> +static int lvts_read_all_tc_temperature(struct lvts_data *lvts_data)
> +{
> +	struct tc_settings *tc = lvts_data->tc;
> +	unsigned int i, j, s_index, msr_raw;
> +	int max_temp = 0, current_temp;
> +	void __iomem *base;
> +
> +	for (i = 0; i < lvts_data->num_tc; i++) {
> +		base = GET_BASE_ADDR(i);
> +		for (j = 0; j < tc[i].num_sensor; j++) {
> +			s_index = tc[i].sensor_map[j];
> +
> +			msr_raw = readl(LVTSMSR0_0 + base + 0x4 * j) & MRS_RAW_MASK;
> +			current_temp = lvts_raw_to_temp(&lvts_data->coeff, msr_raw);
> +
> +			if (msr_raw == 0)
> +				current_temp = THERMAL_TEMP_INVALID;
> +
> +			max_temp = max(max_temp, current_temp);
> +
> +			lvts_data->sen_data[s_index].msr_raw = msr_raw;
> +			lvts_data->sen_data[s_index].temp = current_temp;
> +		}
> +	}
> +
> +	return max_temp;
> +}
> +
> +static int soc_temp_lvts_read_temp(void *data, int *temperature)
> +{
> +	struct soc_temp_tz *lvts_tz = (struct soc_temp_tz *)data;
> +	struct lvts_data *lvts_data = lvts_tz->lvts_data;
> +
> +	if (lvts_tz->id == 0)
> +		*temperature = lvts_read_all_tc_temperature(lvts_data);
> +	else if (lvts_tz->id - 1 < lvts_data->num_sensor)
> +		*temperature = lvts_data->sen_data[lvts_tz->id - 1].temp;
> +	else
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
> +static const struct thermal_zone_of_device_ops soc_temp_lvts_ops = {
> +	.get_temp = soc_temp_lvts_read_temp,
> +};
> +
> +static void lvts_write_device(struct lvts_data *lvts_data, unsigned int data,
> +			      int tc_id)
> +{
> +	void __iomem *base;
> +
> +	base = GET_BASE_ADDR(tc_id);
> +
> +	writel(data, LVTS_CONFIG_0 + base);
> +
> +	usleep_range(5, 15);
> +}
> +
> +static unsigned int lvts_read_device(struct lvts_data *lvts_data,
> +				     unsigned int reg_idx, int tc_id)
> +{
> +	struct device *dev = lvts_data->dev;
> +	void __iomem *base;
> +	unsigned int data;
> +	int ret;
> +
> +	base = GET_BASE_ADDR(tc_id);
> +	writel(READ_DEVICE_REG(reg_idx), LVTS_CONFIG_0 + base);
> +
> +	ret = readl_poll_timeout(LVTS_CONFIG_0 + base, data,
> +				 !(data & DEVICE_ACCESS_STARTUS),
> +				 2, 200);
> +	if (ret)
> +		dev_err(dev,
> +			"Error: LVTS %d DEVICE_ACCESS_START didn't ready\n", tc_id);
> +
> +	data = readl(LVTSRDATA0_0 + base);
> +
> +	return data;
> +}
> +
> +static void wait_all_tc_sensing_point_idle(struct lvts_data *lvts_data)
> +{
> +	struct device *dev = lvts_data->dev;
> +	unsigned int mask, error_code, is_error;
> +	void __iomem *base;
> +	int i, cnt, ret;
> +
> +	mask = BIT(10) | BIT(7) | BIT(0);
> +
> +	for (cnt = 0; cnt < 2; cnt++) {
> +		is_error = 0;
> +		for (i = 0; i < lvts_data->num_tc; i++) {
> +			base = GET_BASE_ADDR(i);
> +			ret = readl_poll_timeout(LVTSMSRCTL1_0 + base, error_code,
> +						 !(error_code & mask), 2, 200);
> +			/*
> +			 * Error code
> +			 * 000: IDLE
> +			 * 001: Write transaction
> +			 * 010: Waiting for read after Write
> +			 * 011: Disable Continue fetching on Device
> +			 * 100: Read transaction
> +			 * 101: Set Device special Register for Voltage threshold
> +			 * 111: Set TSMCU number for Fetch
> +			 */
> +			error_code = ((error_code & BIT(10)) >> 8) +
> +				((error_code & BIT(7)) >> 6) +
> +				(error_code & BIT(0));
> +
> +			if (ret)
> +				dev_err(dev,
> +					"Error LVTS %d sensing points aren't idle, error_code %d\n",
> +					i, error_code);
> +
> +			if (error_code != 0)
> +				is_error = 1;
> +		}
> +
> +		if (is_error == 0)
> +			break;
> +	}
> +}
> +
> +static void lvts_reset(struct lvts_data *lvts_data)
> +{
> +	int i;
> +
> +	for (i = 0; i < lvts_data->num_domain; i++) {
> +		if (lvts_data->domain[i].reset)
> +			reset_control_assert(lvts_data->domain[i].reset);
> +
> +		if (lvts_data->domain[i].reset)
> +			reset_control_deassert(lvts_data->domain[i].reset);
> +	}
> +}
> +
> +static void device_identification(struct lvts_data *lvts_data)
> +{
> +	struct device *dev = lvts_data->dev;
> +	unsigned int i, data;
> +	void __iomem *base;
> +
> +	for (i = 0; i < lvts_data->num_tc; i++) {
> +		base = GET_BASE_ADDR(i);
> +
> +		writel(ENABLE_LVTS_CTRL_CLK, LVTSCLKEN_0 + base);
> +
> +		lvts_write_device(lvts_data, RESET_ALL_DEVICES, i);
> +
> +		lvts_write_device(lvts_data, READ_BACK_DEVICE_ID, i);
> +
> +		/* Check LVTS device ID */
> +		data = (readl(LVTS_ID_0 + base) & GENMASK(7, 0));
> +		if (data != (0x81 + i))
> +			dev_err(dev, "LVTS_TC_%d, Device ID should be 0x%x, but 0x%x\n",
> +				i, (0x81 + i), data);
> +	}
> +}
> +
> +static void disable_all_sensing_points(struct lvts_data *lvts_data)
> +{
> +	unsigned int i;
> +	void __iomem *base;
> +
> +	for (i = 0; i < lvts_data->num_tc; i++) {
> +		base = GET_BASE_ADDR(i);
> +		writel(DISABLE_SENSING_POINT, LVTSMONCTL0_0 + base);
> +	}
> +}
> +
> +static void enable_all_sensing_points(struct lvts_data *lvts_data)
> +{
> +	struct device *dev = lvts_data->dev;
> +	struct tc_settings *tc = lvts_data->tc;
> +	unsigned int i, num;
> +	void __iomem *base;
> +
> +	for (i = 0; i < lvts_data->num_tc; i++) {
> +		base = GET_BASE_ADDR(i);
> +		num = tc[i].num_sensor;
> +
> +		if (num > ALL_SENSING_POINTS) {
> +			dev_err(dev,
> +				"%s, LVTS%d, illegal number of sensors: %d\n",
> +				__func__, i, tc[i].num_sensor);
> +			continue;
> +		}
> +
> +		writel(ENABLE_SENSING_POINT(num), LVTSMONCTL0_0 + base);
> +	}
> +}
> +
> +static void set_polling_speed(struct lvts_data *lvts_data, int tc_id)
> +{
> +	struct device *dev = lvts_data->dev;
> +	struct tc_settings *tc = lvts_data->tc;
> +	unsigned int lvts_mon_ctl_1, lvts_mon_ctl_2;
> +	void __iomem *base;
> +
> +	base = GET_BASE_ADDR(tc_id);
> +
> +	lvts_mon_ctl_1 = ((tc[tc_id].tc_speed.group_interval_delay << 20) & GENMASK(29, 20)) |
> +			(tc[tc_id].tc_speed.period_unit & GENMASK(9, 0));
> +	lvts_mon_ctl_2 = ((tc[tc_id].tc_speed.filter_interval_delay << 16) & GENMASK(25, 16)) |
> +			(tc[tc_id].tc_speed.sensor_interval_delay & GENMASK(9, 0));
> +	/*
> +	 * Clock source of LVTS thermal controller is 26MHz.
> +	 * Period unit is a base for all interval delays
> +	 * All interval delays must multiply it to convert a setting to time.
> +	 * Filter interval delay is a delay between two samples of the same sensor
> +	 * Sensor interval delay is a delay between two samples of differnet sensors
> +	 * Group interval delay is a delay between different rounds.
> +	 * For example:
> +	 *     If Period unit = C, filter delay = 1, sensor delay = 2, group delay = 1,
> +	 *     and two sensors, TS1 and TS2, are in a LVTS thermal controller
> +	 *     and then
> +	 *     Period unit = C * 1/26M * 256 = 12 * 38.46ns * 256 = 118.149us
> +	 *     Filter interval delay = 1 * Period unit = 118.149us
> +	 *     Sensor interval delay = 2 * Period unit = 236.298us
> +	 *     Group interval delay = 1 * Period unit = 118.149us
> +	 *
> +	 *     TS1    TS1 ... TS1    TS2    TS2 ... TS2    TS1...
> +	 *        <--> Filter interval delay
> +	 *                       <--> Sensor interval delay
> +	 *                                             <--> Group interval delay
> +	 */
> +	writel(lvts_mon_ctl_1, LVTSMONCTL1_0 + base);
> +	writel(lvts_mon_ctl_2, LVTSMONCTL2_0 + base);
> +
> +	dev_info(dev, "%s %d, LVTSMONCTL1_0= 0x%x,LVTSMONCTL2_0= 0x%x\n",
> +		 __func__, tc_id, readl(LVTSMONCTL1_0 + base),
> +		 readl(LVTSMONCTL2_0 + base));
> +}
> +
> +static void set_hw_filter(struct lvts_data *lvts_data, int tc_id)
> +{
> +	struct device *dev = lvts_data->dev;
> +	struct tc_settings *tc = lvts_data->tc;
> +	unsigned int option;
> +	void __iomem *base;
> +
> +	base = GET_BASE_ADDR(tc_id);
> +	option = tc[tc_id].hw_filter & 0x7;
> +	/* hw filter
> +	 * 000: Get one sample
> +	 * 001: Get 2 samples and average them
> +	 * 010: Get 4 samples, drop max and min, then average the rest of 2 samples
> +	 * 011: Get 6 samples, drop max and min, then average the rest of 4 samples
> +	 * 100: Get 10 samples, drop max and min, then average the rest of 8 samples
> +	 * 101: Get 18 samples, drop max and min, then average the rest of 16 samples
> +	 */
> +	option = (option << 9) | (option << 6) | (option << 3) | option;
> +
> +	writel(option, LVTSMSRCTL0_0 + base);
> +	dev_info(dev, "%s %d, LVTSMSRCTL0_0= 0x%x\n",
> +		 __func__, tc_id, readl(LVTSMSRCTL0_0 + base));
> +}
> +
> +static int get_dominator_index(struct lvts_data *lvts_data, int tc_id)
> +{
> +	struct device *dev = lvts_data->dev;
> +	struct tc_settings *tc = lvts_data->tc;
> +	int d_index;
> +
> +	if (tc[tc_id].dominator_sensing_point == ALL_SENSING_POINTS) {
> +		d_index = ALL_SENSING_POINTS;
> +	} else if (tc[tc_id].dominator_sensing_point <
> +		tc[tc_id].num_sensor){
> +		d_index = tc[tc_id].dominator_sensing_point;
> +	} else {
> +		dev_err(dev,
> +			"Error: LVTS%d, dominator_sensing_point= %d should smaller than num_sensor= %d\n",
> +			tc_id, tc[tc_id].dominator_sensing_point,
> +			tc[tc_id].num_sensor);
> +
> +		dev_err(dev, "Use the sensing point 0 as the dominated sensor\n");
> +		d_index = SENSING_POINT0;
> +	}
> +
> +	return d_index;
> +}
> +
> +static void disable_hw_reboot_interrupt(struct lvts_data *lvts_data, int tc_id)
> +{
> +	unsigned int temp;
> +	void __iomem *base;
> +
> +	base = GET_BASE_ADDR(tc_id);
> +
> +	/* LVTS thermal controller has two interrupts for thermal HW reboot
> +	 * One is for AP SW and the other is for RGU
> +	 * The interrupt of AP SW can turn off by a bit of a register, but
> +	 * the other for RGU cannot.
> +	 * To prevent rebooting device accidentally, we are going to add
> +	 * a huge offset to LVTS and make LVTS always report extremely low
> +	 * temperature.
> +	 */
> +
> +	/* After adding the huge offset 0x3FFF, LVTS alawys adds the
> +	 * offset to MSR_RAW.
> +	 * When MSR_RAW is larger, SW will convert lower temperature/
> +	 */
> +	temp = readl(LVTSPROTCTL_0 + base);
> +	writel(temp | 0x3FFF, LVTSPROTCTL_0 + base);
> +
> +	/* Disable the interrupt of AP SW */
> +	temp = readl(LVTSMONINT_0 + base);
> +	writel(temp & ~(STAGE3_INT_EN), LVTSMONINT_0 + base);
> +}
> +
> +static void enable_hw_reboot_interrupt(struct lvts_data *lvts_data, int tc_id)
> +{
> +	unsigned int temp;
> +	void __iomem *base;
> +
> +	base = GET_BASE_ADDR(tc_id);
> +
> +	/* Enable the interrupt of AP SW */
> +	temp = readl(LVTSMONINT_0 + base);
> +	writel(temp | STAGE3_INT_EN, LVTSMONINT_0 + base);
> +	/* Clear the offset */
> +	temp = readl(LVTSPROTCTL_0 + base);
> +	writel(temp & ~PROTOFFSET, LVTSPROTCTL_0 + base);
> +}
> +
> +static void set_tc_hw_reboot_threshold(struct lvts_data *lvts_data,
> +				       int trip_point, int tc_id)
> +{
> +	struct device *dev = lvts_data->dev;
> +	unsigned int msr_raw, temp, config, d_index;
> +	void __iomem *base;
> +
> +	base = GET_BASE_ADDR(tc_id);
> +	d_index = get_dominator_index(lvts_data, tc_id);
> +
> +	dev_info(dev, "%s: LVTS%d, the dominator sensing point= %d\n",
> +		 __func__, tc_id, d_index);
> +
> +	disable_hw_reboot_interrupt(lvts_data, tc_id);
> +
> +	temp = readl(LVTSPROTCTL_0 + base);
> +	if (d_index == ALL_SENSING_POINTS) {
> +		/* Maximum of 4 sensing points */
> +		config = (0x1 << 16);
> +		writel(config | temp, LVTSPROTCTL_0 + base);
> +	} else {
> +		/* Select protection sensor */
> +		config = ((d_index << 2) + 0x2) << 16;
> +		writel(config | temp, LVTSPROTCTL_0 + base);
> +	}
> +
> +	msr_raw = lvts_temp_to_raw(&lvts_data->coeff, trip_point);
> +	writel(msr_raw, LVTSPROTTC_0 + base);
> +
> +	enable_hw_reboot_interrupt(lvts_data, tc_id);
> +}
> +
> +static void set_all_tc_hw_reboot(struct lvts_data *lvts_data)
> +{
> +	struct tc_settings *tc = lvts_data->tc;
> +	int i, trip_point;
> +
> +	for (i = 0; i < lvts_data->num_tc; i++) {
> +		trip_point = tc[i].hw_reboot_trip_point;
> +
> +		if (tc[i].num_sensor == 0)
> +			continue;
> +
> +		if (trip_point == DISABLE_THERMAL_HW_REBOOT)
> +			continue;
> +
> +		set_tc_hw_reboot_threshold(lvts_data, trip_point, i);
> +	}
> +}
> +
> +static int lvts_init(struct lvts_data *lvts_data)
> +{
> +	struct platform_ops *ops = &lvts_data->ops;
> +	struct device *dev = lvts_data->dev;
> +	int ret;
> +
> +	ret = clk_prepare_enable(lvts_data->clk);
> +	if (ret) {
> +		dev_err(dev,
> +			"Error: Failed to enable lvts controller clock: %d\n",
> +			ret);
> +		return ret;
> +	}
> +
> +	lvts_reset(lvts_data);
> +
> +	device_identification(lvts_data);
> +	if (ops->device_enable_and_init)
> +		ops->device_enable_and_init(lvts_data);
> +
> +	if (IS_ENABLE(FEATURE_DEVICE_AUTO_RCK)) {
> +		if (ops->device_enable_auto_rck)
> +			ops->device_enable_auto_rck(lvts_data);
> +	} else {
> +		if (ops->device_read_count_rc_n)
> +			ops->device_read_count_rc_n(lvts_data);
> +	}
> +
> +	if (ops->set_cal_data)
> +		ops->set_cal_data(lvts_data);
> +
> +	disable_all_sensing_points(lvts_data);
> +	wait_all_tc_sensing_point_idle(lvts_data);
> +	if (ops->init_controller)
> +		ops->init_controller(lvts_data);
> +	enable_all_sensing_points(lvts_data);
> +
> +	set_all_tc_hw_reboot(lvts_data);
> +
> +	return 0;
> +}
> +
> +static int prepare_calibration_data(struct lvts_data *lvts_data)
> +{
> +	struct device *dev = lvts_data->dev;
> +	struct sensor_cal_data *cal_data = &lvts_data->cal_data;
> +	struct platform_ops *ops = &lvts_data->ops;
> +	int i, offset, size;
> +	char buffer[512];
> +
> +	cal_data->count_r = devm_kcalloc(dev, lvts_data->num_sensor,
> +					 sizeof(*cal_data->count_r), GFP_KERNEL);
> +	if (!cal_data->count_r)
> +		return -ENOMEM;
> +
> +	cal_data->count_rc = devm_kcalloc(dev, lvts_data->num_sensor,
> +					  sizeof(*cal_data->count_rc), GFP_KERNEL);
> +	if (!cal_data->count_rc)
> +		return -ENOMEM;
> +
> +	if (ops->efuse_to_cal_data)
> +		ops->efuse_to_cal_data(lvts_data);
> +
> +	cal_data->use_fake_efuse = 1;
> +	if (cal_data->golden_temp != 0) {
> +		cal_data->use_fake_efuse = 0;
> +	} else {
> +		for (i = 0; i < lvts_data->num_sensor; i++) {
> +			if (cal_data->count_r[i] != 0 ||
> +			    cal_data->count_rc[i] != 0) {
> +				cal_data->use_fake_efuse = 0;
> +				break;
> +			}
> +		}
> +	}
> +
> +	if (cal_data->use_fake_efuse) {
> +		/* It means all efuse data are equal to 0 */
> +		dev_err(dev,
> +			"[lvts_cal] This sample is not calibrated, fake !!\n");
> +
> +		cal_data->golden_temp = cal_data->default_golden_temp;
> +		for (i = 0; i < lvts_data->num_sensor; i++) {
> +			cal_data->count_r[i] = cal_data->default_count_r;
> +			cal_data->count_rc[i] = cal_data->default_count_rc;
> +		}
> +	}
> +
> +	lvts_data->coeff.golden_temp = cal_data->golden_temp;
> +
> +	dev_info(dev, "[lvts_cal] golden_temp = %d\n", cal_data->golden_temp);
> +
> +	size = sizeof(buffer);
> +	offset = snprintf(buffer, size, "[lvts_cal] num:g_count:g_count_rc ");
> +	for (i = 0; i < lvts_data->num_sensor; i++)
> +		offset += snprintf(buffer + offset, size - offset, "%d:%d:%d ",
> +				   i, cal_data->count_r[i], cal_data->count_rc[i]);
> +
> +	buffer[offset] = '\0';
> +	dev_info(dev, "%s\n", buffer);
> +
> +	return 0;
> +}
> +
> +static int get_calibration_data(struct lvts_data *lvts_data)
> +{
> +	struct device *dev = lvts_data->dev;
> +	char cell_name[8];
> +	struct nvmem_cell *cell;
> +	u32 *buf;
> +	size_t len;
> +	int i, j, index = 0, ret;
> +
> +	lvts_data->efuse = devm_kcalloc(dev, lvts_data->num_efuse_addr,
> +					sizeof(*lvts_data->efuse), GFP_KERNEL);
> +	if (!lvts_data->efuse)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < lvts_data->num_efuse_block; i++) {
> +		snprintf(cell_name, sizeof(cell_name), "e_data%d", i + 1);
> +		cell = nvmem_cell_get(dev, cell_name);
> +		if (IS_ERR(cell)) {
> +			dev_err(dev, "Error: Failed to get nvmem cell %s\n", cell_name);
> +			return PTR_ERR(cell);
> +		}
> +
> +		buf = (u32 *)nvmem_cell_read(cell, &len);
> +		nvmem_cell_put(cell);
> +
> +		if (IS_ERR(buf))
> +			return PTR_ERR(buf);
> +
> +		for (j = 0; j < (len / sizeof(u32)); j++) {
> +			if (index >= lvts_data->num_efuse_addr) {
> +				dev_err(dev, "Array efuse is going to overflow");
> +				kfree(buf);
> +				return -EINVAL;
> +			}
> +
> +			lvts_data->efuse[index] = buf[j];
> +			index++;
> +		}
> +
> +		kfree(buf);
> +	}
> +
> +	ret = prepare_calibration_data(lvts_data);
> +
> +	return ret;
> +}
> +
> +static int of_update_lvts_data(struct lvts_data *lvts_data,
> +			       struct platform_device *pdev)
> +{
> +	struct device *dev = lvts_data->dev;
> +	struct power_domain *domain;
> +	struct resource *res;
> +	unsigned int i;
> +	int ret;
> +
> +	lvts_data->clk = devm_clk_get(dev, "lvts_clk");
> +	if (IS_ERR(lvts_data->clk))
> +		return PTR_ERR(lvts_data->clk);
> +
> +	domain = devm_kcalloc(dev, lvts_data->num_domain, sizeof(*domain), GFP_KERNEL);
> +	if (!domain)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < lvts_data->num_domain; i++) {
> +		/* Get base address */
> +		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
> +		if (!res) {
> +			dev_err(dev, "No IO resource, index %d\n", i);
> +			return -ENXIO;
> +		}
> +
> +		domain[i].base = devm_ioremap_resource(dev, res);
> +		if (IS_ERR(domain[i].base)) {
> +			dev_err(dev, "Failed to remap io, index %d\n", i);
> +			return PTR_ERR(domain[i].base);
> +		}
> +
> +		/* Get interrupt number */
> +		res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
> +		if (!res) {
> +			dev_err(dev, "No irq resource, index %d\n", i);
> +			return -EINVAL;
> +		}
> +		domain[i].irq_num = res->start;
> +
> +		/* Get reset control */
> +		domain[i].reset = devm_reset_control_get_by_index(dev, i);
> +		if (IS_ERR(domain[i].reset)) {
> +			dev_err(dev, "Failed to get, index %d\n", i);
> +			return PTR_ERR(domain[i].reset);
> +		}
> +	}
> +
> +	lvts_data->domain = domain;
> +
> +	lvts_data->sen_data = devm_kcalloc(dev, lvts_data->num_sensor,
> +					   sizeof(*lvts_data->sen_data), GFP_KERNEL);
> +	if (!lvts_data->sen_data)
> +		return -ENOMEM;
> +
> +	ret = get_calibration_data(lvts_data);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static void lvts_device_close(struct lvts_data *lvts_data)
> +{
> +	unsigned int i;
> +	void __iomem *base;
> +
> +	for (i = 0; i < lvts_data->num_tc; i++) {
> +		base = GET_BASE_ADDR(i);
> +		lvts_write_device(lvts_data, RESET_ALL_DEVICES, i);
> +		writel(DISABLE_LVTS_CTRL_CLK, LVTSCLKEN_0 + base);
> +	}
> +}
> +
> +static void lvts_close(struct lvts_data *lvts_data)
> +{
> +	disable_all_sensing_points(lvts_data);
> +	wait_all_tc_sensing_point_idle(lvts_data);
> +	lvts_device_close(lvts_data);
> +	clk_disable_unprepare(lvts_data->clk);
> +}
> +
> +static void tc_irq_handler(struct lvts_data *lvts_data, int tc_id)
> +{
> +	struct device *dev = lvts_data->dev;
> +	unsigned int ret = 0;
> +	void __iomem *base;
> +
> +	base = GET_BASE_ADDR(tc_id);
> +
> +	ret = readl(LVTSMONINTSTS_0 + base);
> +	/* Write back to clear interrupt status */
> +	writel(ret, LVTSMONINTSTS_0 + base);
> +
> +	dev_info(dev, "[Thermal IRQ] LVTS thermal controller %d, LVTSMONINTSTS=0x%08x\n",
> +		 tc_id, ret);
> +
> +	if (ret & THERMAL_PROTECTION_STAGE_3)
> +		dev_info(dev,
> +			 "[Thermal IRQ]: Thermal protection stage 3 interrupt triggered\n");
> +}
> +
> +static irqreturn_t irq_handler(int irq, void *dev_id)
> +{
> +	struct lvts_data *lvts_data = (struct lvts_data *)dev_id;
> +	struct device *dev = lvts_data->dev;
> +	struct tc_settings *tc = lvts_data->tc;
> +	unsigned int i, *irq_bitmap;
> +	void __iomem *base;
> +
> +	irq_bitmap = kcalloc(lvts_data->num_domain, sizeof(*irq_bitmap), GFP_ATOMIC);
> +
> +	if (!irq_bitmap)
> +		return IRQ_NONE;
> +
> +	for (i = 0; i < lvts_data->num_domain; i++) {
> +		base = lvts_data->domain[i].base;
> +		irq_bitmap[i] = readl(THERMINTST + base);
> +		dev_info(dev, "%s : THERMINTST = 0x%x\n", __func__, irq_bitmap[i]);
> +	}
> +
> +	for (i = 0; i < lvts_data->num_tc; i++) {
> +		if ((irq_bitmap[tc[i].domain_index] & tc[i].irq_bit) == 0)
> +			tc_irq_handler(lvts_data, i);
> +	}
> +
> +	kfree(irq_bitmap);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int lvts_register_irq_handler(struct lvts_data *lvts_data)
> +{
> +	struct device *dev = lvts_data->dev;
> +	unsigned int i;
> +	int ret;
> +
> +	for (i = 0; i < lvts_data->num_domain; i++) {
> +		ret = devm_request_irq(dev, lvts_data->domain[i].irq_num, irq_handler,
> +				       IRQF_TRIGGER_HIGH, "mtk_lvts", lvts_data);
> +
> +		if (ret) {
> +			dev_err(dev, "Failed to register LVTS IRQ, ret %d, domain %d irq_num %d\n",
> +				ret, i, lvts_data->domain[i].irq_num);
> +			lvts_close(lvts_data);
> +			return ret;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int lvts_register_thermal_zones(struct lvts_data *lvts_data)
> +{
> +	struct device *dev = lvts_data->dev;
> +	struct thermal_zone_device *tzdev;
> +	struct soc_temp_tz *lvts_tz;
> +	int i, ret;
> +
> +	for (i = 0; i < lvts_data->num_sensor + 1; i++) {
> +		lvts_tz = devm_kzalloc(dev, sizeof(*lvts_tz), GFP_KERNEL);
> +		if (!lvts_tz) {
> +			lvts_close(lvts_data);
> +			return -ENOMEM;
> +		}
> +
> +		lvts_tz->id = i;
> +		lvts_tz->lvts_data = lvts_data;
> +
> +		tzdev = devm_thermal_zone_of_sensor_register(dev, lvts_tz->id,
> +							     lvts_tz, &soc_temp_lvts_ops);
> +
> +		if (IS_ERR(tzdev)) {
> +			if (lvts_tz->id != 0)
> +				return 0;
> +
> +			ret = PTR_ERR(tzdev);
> +			dev_err(dev, "Error: Failed to register lvts tz %d, ret = %d\n",
> +				lvts_tz->id, ret);
> +			lvts_close(lvts_data);
> +			return ret;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int lvts_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct lvts_data *lvts_data;
> +	int ret;
> +
> +	lvts_data = (struct lvts_data *)of_device_get_match_data(dev);
> +
> +	if (!lvts_data)	{
> +		dev_err(dev, "Error: Failed to get lvts platform data\n");
> +		return -ENODATA;
> +	}
> +
> +	lvts_data->dev = &pdev->dev;
> +
> +	ret = of_update_lvts_data(lvts_data, pdev);
> +	if (ret)
> +		return ret;
> +
> +	platform_set_drvdata(pdev, lvts_data);
> +
> +	ret = lvts_init(lvts_data);
> +	if (ret)
> +		return ret;
> +
> +	ret = lvts_register_irq_handler(lvts_data);
> +	if (ret)
> +		return ret;
> +
> +	ret = lvts_register_thermal_zones(lvts_data);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int lvts_remove(struct platform_device *pdev)
> +{
> +	struct lvts_data *lvts_data;
> +
> +	lvts_data = (struct lvts_data *)platform_get_drvdata(pdev);
> +
> +	lvts_close(lvts_data);
> +
> +	return 0;
> +}
> +
> +static int lvts_suspend(struct platform_device *pdev, pm_message_t state)
> +{
> +	struct lvts_data *lvts_data;
> +
> +	lvts_data = (struct lvts_data *)platform_get_drvdata(pdev);
> +
> +	lvts_close(lvts_data);
> +
> +	return 0;
> +}
> +
> +static int lvts_resume(struct platform_device *pdev)
> +{
> +	int ret;
> +	struct lvts_data *lvts_data;
> +
> +	lvts_data = (struct lvts_data *)platform_get_drvdata(pdev);
> +
> +	ret = lvts_init(lvts_data);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +/*==================================================
> + * LVTS v4 common code
> + *==================================================
> + */
> +static void device_enable_and_init_v4(struct lvts_data *lvts_data)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < lvts_data->num_tc; i++) {
> +		lvts_write_device(lvts_data, STOP_COUNTING_V4, i);
> +		lvts_write_device(lvts_data, SET_RG_TSFM_LPDLY_V4, i);
> +		lvts_write_device(lvts_data, SET_COUNTING_WINDOW_20US1_V4, i);
> +		lvts_write_device(lvts_data, SET_COUNTING_WINDOW_20US2_V4, i);
> +		lvts_write_device(lvts_data, TSV2F_CHOP_CKSEL_AND_TSV2F_EN_V4, i);
> +		lvts_write_device(lvts_data, TSBG_DEM_CKSEL_X_TSBG_CHOP_EN_V4, i);
> +		lvts_write_device(lvts_data, SET_TS_RSV_V4, i);
> +		lvts_write_device(lvts_data, SET_TS_EN_V4, i);
> +		lvts_write_device(lvts_data, TOGGLE_RG_TSV2F_VCO_RST1_V4, i);
> +		lvts_write_device(lvts_data, TOGGLE_RG_TSV2F_VCO_RST2_V4, i);
> +	}
> +
> +	lvts_data->counting_window_us = 20;
> +}
> +
> +static void device_enable_auto_rck_v4(struct lvts_data *lvts_data)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < lvts_data->num_tc; i++)
> +		lvts_write_device(lvts_data, SET_LVTS_AUTO_RCK_V4, i);
> +}
> +
> +static int device_read_count_rc_n_v4(struct lvts_data *lvts_data)
> +{
> +	/* Resistor-Capacitor Calibration */
> +	/* count_RC_N: count RC now */
> +	struct device *dev = lvts_data->dev;
> +	struct tc_settings *tc = lvts_data->tc;
> +	struct sensor_cal_data *cal_data = &lvts_data->cal_data;
> +	unsigned int offset, size, s_index, data;
> +	void __iomem *base;
> +	int ret, i, j;
> +	char buffer[512];
> +
> +	cal_data->count_rc_now = devm_kcalloc(dev, lvts_data->num_sensor,
> +					      sizeof(*cal_data->count_rc_now), GFP_KERNEL);
> +	if (!cal_data->count_rc_now)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < lvts_data->num_tc; i++) {
> +		base = GET_BASE_ADDR(i);
> +		for (j = 0; j < tc[i].num_sensor; j++) {
> +			s_index = tc[i].sensor_map[j];
> +
> +			lvts_write_device(lvts_data, SELECT_SENSOR_RCK_V4(j), i);
> +			lvts_write_device(lvts_data, SET_DEVICE_SINGLE_MODE_V4, i);
> +			usleep_range(10, 20);
> +
> +			lvts_write_device(lvts_data, KICK_OFF_RCK_COUNTING_V4, i);
> +			usleep_range(30, 40);
> +
> +			ret = readl_poll_timeout(LVTS_CONFIG_0 + base, data,
> +						 !(data & DEVICE_SENSING_STATUS), 2, 200);
> +			if (ret)
> +				dev_err(dev,
> +					"Error: LVTS %d DEVICE_SENSING_STATUS didn't ready\n", i);
> +
> +			data = lvts_read_device(lvts_data, 0x00, i);
> +
> +			cal_data->count_rc_now[s_index] = (data & GENMASK(23, 0));
> +		}
> +
> +		/* Recover Setting for Normal Access on
> +		 * temperature fetch
> +		 */
> +		lvts_write_device(lvts_data, SET_SENSOR_NO_RCK_V4, i);
> +		lvts_write_device(lvts_data, SET_DEVICE_LOW_POWER_SINGLE_MODE_V4, i);
> +	}
> +
> +	size = sizeof(buffer);
> +	offset = snprintf(buffer, size, "[COUNT_RC_NOW] ");
> +	for (i = 0; i < lvts_data->num_sensor; i++)
> +		offset += snprintf(buffer + offset, size - offset, "%d:%d ",
> +				   i, cal_data->count_rc_now[i]);
> +
> +	buffer[offset] = '\0';
> +	dev_info(dev, "%s\n", buffer);
> +
> +	return 0;
> +}
> +
> +static void set_calibration_data_v4(struct lvts_data *lvts_data)
> +{
> +	struct tc_settings *tc = lvts_data->tc;
> +	struct sensor_cal_data *cal_data = &lvts_data->cal_data;
> +	unsigned int i, j, s_index, e_data;
> +	void __iomem *base;
> +
> +	for (i = 0; i < lvts_data->num_tc; i++) {
> +		base = GET_BASE_ADDR(i);
> +
> +		for (j = 0; j < tc[i].num_sensor; j++) {
> +			s_index = tc[i].sensor_map[j];
> +			if (IS_ENABLE(FEATURE_DEVICE_AUTO_RCK))
> +				e_data = cal_data->count_r[s_index];
> +			else
> +				e_data = (((unsigned long long)
> +					cal_data->count_rc_now[s_index]) *
> +					cal_data->count_r[s_index]) >> 14;
> +
> +			writel(e_data, LVTSEDATA00_0 + base + 0x4 * j);
> +		}
> +	}
> +}
> +
> +static void init_controller_v4(struct lvts_data *lvts_data)
> +{
> +	struct device *dev = lvts_data->dev;
> +	unsigned int i;
> +	void __iomem *base;
> +
> +	for (i = 0; i < lvts_data->num_tc; i++) {
> +		base = GET_BASE_ADDR(i);
> +
> +		lvts_write_device(lvts_data, SET_DEVICE_LOW_POWER_SINGLE_MODE_V4, i);
> +
> +		writel(SET_SENSOR_INDEX, LVTSTSSEL_0 + base);
> +		writel(SET_CALC_SCALE_RULES, LVTSCALSCALE_0 + base);
> +
> +		set_polling_speed(lvts_data, i);
> +		set_hw_filter(lvts_data, i);
> +
> +		dev_info(dev, "lvts%d: read all %d sensors in %d us, one in %d us\n",
> +			 i, GET_TC_SENSOR_NUM(i), GROUP_LATENCY_US(i), SENSOR_LATENCY_US(i));
> +	}
> +}
> +
> +/*==================================================
> + * LVTS MT6873
> + *==================================================
> + */
> +
> +#define MT6873_NUM_LVTS (ARRAY_SIZE(mt6873_tc_settings))
> +
> +enum mt6873_lvts_domain {
> +	MT6873_AP_DOMAIN,
> +	MT6873_MCU_DOMAIN,
> +	MT6873_NUM_DOMAIN
> +};
> +
> +enum mt6873_lvts_sensor_enum {
> +	MT6873_TS1_0,
> +	MT6873_TS1_1,
> +	MT6873_TS2_0,
> +	MT6873_TS2_1,
> +	MT6873_TS3_0,
> +	MT6873_TS3_1,
> +	MT6873_TS3_2,
> +	MT6873_TS3_3,
> +	MT6873_TS4_0,
> +	MT6873_TS4_1,
> +	MT6873_TS5_0,
> +	MT6873_TS5_1,
> +	MT6873_TS6_0,
> +	MT6873_TS6_1,
> +	MT6873_TS7_0,
> +	MT6873_TS7_1,
> +	MT6873_TS7_2,
> +	MT6873_NUM_TS
> +};
> +
> +static void mt6873_efuse_to_cal_data(struct lvts_data *lvts_data)
> +{
> +	struct sensor_cal_data *cal_data = &lvts_data->cal_data;
> +
> +	cal_data->golden_temp = GET_CAL_DATA_BITMASK(0, 31, 24);
> +	cal_data->count_r[MT6873_TS1_0] = GET_CAL_DATA_BITMASK(1, 23, 0);
> +	cal_data->count_r[MT6873_TS1_1] = GET_CAL_DATA_BITMASK(2, 23, 0);
> +	cal_data->count_r[MT6873_TS2_0] = GET_CAL_DATA_BITMASK(3, 23, 0);
> +	cal_data->count_r[MT6873_TS2_1] = GET_CAL_DATA_BITMASK(4, 23, 0);
> +	cal_data->count_r[MT6873_TS3_0] = GET_CAL_DATA_BITMASK(5, 23, 0);
> +	cal_data->count_r[MT6873_TS3_1] = GET_CAL_DATA_BITMASK(6, 23, 0);
> +	cal_data->count_r[MT6873_TS3_2] = GET_CAL_DATA_BITMASK(7, 23, 0);
> +	cal_data->count_r[MT6873_TS3_3] = GET_CAL_DATA_BITMASK(8, 23, 0);
> +	cal_data->count_r[MT6873_TS4_0] = GET_CAL_DATA_BITMASK(9, 23, 0);
> +	cal_data->count_r[MT6873_TS4_1] = GET_CAL_DATA_BITMASK(10, 23, 0);
> +	cal_data->count_r[MT6873_TS5_0] = GET_CAL_DATA_BITMASK(11, 23, 0);
> +	cal_data->count_r[MT6873_TS5_1] = GET_CAL_DATA_BITMASK(12, 23, 0);
> +	cal_data->count_r[MT6873_TS6_0] = GET_CAL_DATA_BITMASK(13, 23, 0);
> +	cal_data->count_r[MT6873_TS6_1] = GET_CAL_DATA_BITMASK(14, 23, 0);
> +	cal_data->count_r[MT6873_TS7_0] = GET_CAL_DATA_BITMASK(15, 23, 0);
> +	cal_data->count_r[MT6873_TS7_1] = GET_CAL_DATA_BITMASK(16, 23, 0);
> +	cal_data->count_r[MT6873_TS7_2] = GET_CAL_DATA_BITMASK(17, 23, 0);
> +
> +	cal_data->count_rc[MT6873_TS1_0] = GET_CAL_DATA_BITMASK(21, 23, 0);
> +
> +	cal_data->count_rc[MT6873_TS2_0] = (GET_CAL_DATA_BITMASK(1, 31, 24) << 16) +
> +					   (GET_CAL_DATA_BITMASK(2, 31, 24) << 8) +
> +					    GET_CAL_DATA_BITMASK(3, 31, 24);
> +
> +	cal_data->count_rc[MT6873_TS3_0] = (GET_CAL_DATA_BITMASK(4, 31, 24) << 16) +
> +					   (GET_CAL_DATA_BITMASK(5, 31, 24) << 8) +
> +					    GET_CAL_DATA_BITMASK(6, 31, 24);
> +
> +	cal_data->count_rc[MT6873_TS4_0] = (GET_CAL_DATA_BITMASK(7, 31, 24) << 16) +
> +					   (GET_CAL_DATA_BITMASK(8, 31, 24) << 8) +
> +					    GET_CAL_DATA_BITMASK(9, 31, 24);
> +
> +	cal_data->count_rc[MT6873_TS5_0] = (GET_CAL_DATA_BITMASK(10, 31, 24) << 16) +
> +					   (GET_CAL_DATA_BITMASK(11, 31, 24) << 8) +
> +					    GET_CAL_DATA_BITMASK(12, 31, 24);
> +
> +	cal_data->count_rc[MT6873_TS6_0] = (GET_CAL_DATA_BITMASK(13, 31, 24) << 16) +
> +					   (GET_CAL_DATA_BITMASK(14, 31, 24) << 8) +
> +					    GET_CAL_DATA_BITMASK(15, 31, 24);
> +
> +	cal_data->count_rc[MT6873_TS7_0] = (GET_CAL_DATA_BITMASK(16, 31, 24) << 16) +
> +					   (GET_CAL_DATA_BITMASK(17, 31, 24) << 8) +
> +					    GET_CAL_DATA_BITMASK(18, 31, 24);
> +}
> +
> +static struct tc_settings mt6873_tc_settings[] = {
> +	[0] = {
> +		.domain_index = MT6873_MCU_DOMAIN,
> +		.addr_offset = 0x0,
> +		.num_sensor = 2,
> +		.sensor_map = {MT6873_TS1_0, MT6873_TS1_1},
> +		.tc_speed = SET_TC_SPEED_IN_US(118, 118, 118, 118),
> +		.hw_filter = LVTS_FILTER_2_OF_4,
> +		.dominator_sensing_point = SENSING_POINT1,
> +		.hw_reboot_trip_point = 117000,
> +		.irq_bit = BIT(3),
> +	},
> +	[1] = {
> +		.domain_index = MT6873_MCU_DOMAIN,
> +		.addr_offset = 0x100,
> +		.num_sensor = 2,
> +		.sensor_map = {MT6873_TS2_0, MT6873_TS2_1},
> +		.tc_speed = SET_TC_SPEED_IN_US(118, 118, 118, 118),
> +		.hw_filter = LVTS_FILTER_2_OF_4,
> +		.dominator_sensing_point = SENSING_POINT0,
> +		.hw_reboot_trip_point = 117000,
> +		.irq_bit = BIT(4),
> +	},
> +	[2] = {
> +		.domain_index = MT6873_MCU_DOMAIN,
> +		.addr_offset = 0x200,
> +		.num_sensor = 4,
> +		.sensor_map = {MT6873_TS3_0, MT6873_TS3_1, MT6873_TS3_2, MT6873_TS3_3},
> +		.tc_speed = SET_TC_SPEED_IN_US(118, 118, 118, 118),
> +		.hw_filter = LVTS_FILTER_2_OF_4,
> +		.dominator_sensing_point = SENSING_POINT0,
> +		.hw_reboot_trip_point = 117000,
> +		.irq_bit = BIT(5),
> +	},
> +	[3] = {
> +		.domain_index = MT6873_AP_DOMAIN,
> +		.addr_offset = 0x0,
> +		.num_sensor = 2,
> +		.sensor_map = {MT6873_TS4_0, MT6873_TS4_1},
> +		.tc_speed = SET_TC_SPEED_IN_US(118, 118, 118, 118),
> +		.hw_filter = LVTS_FILTER_2_OF_4,
> +		.dominator_sensing_point = SENSING_POINT0,
> +		.hw_reboot_trip_point = 117000,
> +		.irq_bit = BIT(3),
> +	},
> +	[4] = {
> +		.domain_index = MT6873_AP_DOMAIN,
> +		.addr_offset = 0x100,
> +		.num_sensor = 2,
> +		.sensor_map = {MT6873_TS5_0, MT6873_TS5_1},
> +		.tc_speed = SET_TC_SPEED_IN_US(118, 118, 118, 118),
> +		.hw_filter = LVTS_FILTER_2_OF_4,
> +		.dominator_sensing_point = SENSING_POINT1,
> +		.hw_reboot_trip_point = 117000,
> +		.irq_bit = BIT(4),
> +	},
> +	[5] = {
> +		.domain_index = MT6873_AP_DOMAIN,
> +		.addr_offset = 0x200,
> +		.num_sensor = 2,
> +		.sensor_map = {MT6873_TS6_0, MT6873_TS6_1},
> +		.tc_speed = SET_TC_SPEED_IN_US(118, 118, 118, 118),
> +		.hw_filter = LVTS_FILTER_2_OF_4,
> +		.dominator_sensing_point = SENSING_POINT1,
> +		.hw_reboot_trip_point = 117000,
> +		.irq_bit = BIT(5),
> +	},
> +	[6] = {
> +		.domain_index = MT6873_AP_DOMAIN,
> +		.addr_offset = 0x300,
> +		.num_sensor = 3,
> +		.sensor_map = {MT6873_TS7_0, MT6873_TS7_1, MT6873_TS7_2},
> +		.tc_speed = SET_TC_SPEED_IN_US(118, 118, 118, 118),
> +		.hw_filter = LVTS_FILTER_2_OF_4,
> +		.dominator_sensing_point = SENSING_POINT2,
> +		.hw_reboot_trip_point = 117000,
> +		.irq_bit = BIT(6),
> +	}
> +};
> +
> +static struct lvts_data mt6873_lvts_data = {
> +	.num_domain = MT6873_NUM_DOMAIN,
> +	.num_tc = MT6873_NUM_LVTS,
> +	.tc = mt6873_tc_settings,
> +	.num_sensor = MT6873_NUM_TS,
> +	.ops = {
> +		.efuse_to_cal_data = mt6873_efuse_to_cal_data,
> +		.device_enable_and_init = device_enable_and_init_v4,
> +		.device_enable_auto_rck = device_enable_auto_rck_v4,
> +		.device_read_count_rc_n = device_read_count_rc_n_v4,
> +		.set_cal_data = set_calibration_data_v4,
> +		.init_controller = init_controller_v4,
> +	},
> +	.feature_bitmap = FEATURE_DEVICE_AUTO_RCK,
> +	.num_efuse_addr = 22,
> +	.num_efuse_block = 1,
> +	.cal_data = {
> +		.default_golden_temp = 50,
> +		.default_count_r = 35000,
> +		.default_count_rc = 2750,
> +	},
> +	.coeff = {
> +		.a = -250460,
> +		.b = 250460,
> +	},
> +};
> +
> +/*==================================================
> + *==================================================
> + * Support chips
> + *==================================================
> + */
> +static const struct of_device_id lvts_of_match[] = {
> +	{
> +		.compatible = "mediatek,mt6873-lvts",
> +		.data = (void *)&mt6873_lvts_data,
> +	},
> +	{
> +	},
> +};
> +MODULE_DEVICE_TABLE(of, lvts_of_match);
> +/*==================================================*/
> +static struct platform_driver soc_temp_lvts = {
> +	.probe = lvts_probe,
> +	.remove = lvts_remove,
> +	.suspend = lvts_suspend,
> +	.resume = lvts_resume,
> +	.driver = {
> +		.name = "mtk-soc-temp-lvts",
> +		.of_match_table = lvts_of_match,
> +	},
> +};
> +
> +module_platform_driver(soc_temp_lvts);
> +MODULE_AUTHOR("Yu-Chia Chang <ethan.chang@mediatek.com>");
> +MODULE_AUTHOR("Michael Kao <michael.kao@mediatek.com>");
> +MODULE_DESCRIPTION("Mediatek soc temperature driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/thermal/mediatek/soc_temp_lvts.h b/drivers/thermal/mediatek/soc_temp_lvts.h
> new file mode 100644
> index 000000000000..1d90bdec53c6
> --- /dev/null
> +++ b/drivers/thermal/mediatek/soc_temp_lvts.h
> @@ -0,0 +1,312 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2020 MediaTek Inc.
> + */
> +
> +#ifndef __MTK_SOC_TEMP_LVTS_H__
> +#define __MTK_SOC_TEMP_LVTS_H__
> +
> +/* LVTS HW filter settings
> + * 000: Get one sample
> + * 001: Get 2 samples and average them
> + * 010: Get 4 samples, drop max and min, then average the rest of 2 samples
> + * 011: Get 6 samples, drop max and min, then average the rest of 4 samples
> + * 100: Get 10 samples, drop max and min, then average the rest of 8 samples
> + * 101: Get 18 samples, drop max and min, then average the rest of 16 samples
> + */
> +enum lvts_hw_filter {
> +	LVTS_FILTER_1,
> +	LVTS_FILTER_2,
> +	LVTS_FILTER_2_OF_4,
> +	LVTS_FILTER_4_OF_6,
> +	LVTS_FILTER_8_OF_10,
> +	LVTS_FILTER_16_OF_18
> +};
> +
> +enum lvts_sensing_point {
> +	SENSING_POINT0,
> +	SENSING_POINT1,
> +	SENSING_POINT2,
> +	SENSING_POINT3,
> +	ALL_SENSING_POINTS
> +};
> +
> +/*==================================================
> + * Data structure
> + *==================================================
> + */
> +struct lvts_data;
> +
> +struct speed_settings {
> +	unsigned int period_unit;
> +	unsigned int group_interval_delay;
> +	unsigned int filter_interval_delay;
> +	unsigned int sensor_interval_delay;
> +};
> +
> +struct tc_settings {
> +	unsigned int domain_index;
> +	unsigned int addr_offset;
> +	unsigned int num_sensor;
> +	unsigned int sensor_map[ALL_SENSING_POINTS]; /* In sensor ID */
> +	struct speed_settings tc_speed;
> +	/* HW filter setting
> +	 * 000: Get one sample
> +	 * 001: Get 2 samples and average them
> +	 * 010: Get 4 samples, drop max and min, then average the rest of 2 samples
> +	 * 011: Get 6 samples, drop max and min, then average the rest of 4 samples
> +	 * 100: Get 10 samples, drop max and min, then average the rest of 8 samples
> +	 * 101: Get 18 samples, drop max and min, then average the rest of 16 samples
> +	 */
> +	unsigned int hw_filter;
> +	/* Dominator_sensing point is used to select a sensing point
> +	 * and reference its temperature to trigger Thermal HW Reboot
> +	 * When it is ALL_SENSING_POINTS, it will select all sensing points
> +	 */
> +	int dominator_sensing_point;
> +	int hw_reboot_trip_point; /* -274000: Disable HW reboot */
> +	unsigned int irq_bit;
> +};
> +
> +struct formula_coeff {
> +	int a;
> +	int b;
> +	unsigned int golden_temp;
> +};
> +
> +struct sensor_cal_data {
> +	int use_fake_efuse;	/* 1: Use fake efuse, 0: Use real efuse */
> +	unsigned int golden_temp;
> +	unsigned int *count_r;
> +	unsigned int *count_rc;
> +	unsigned int *count_rc_now;
> +
> +	unsigned int default_golden_temp;
> +	unsigned int default_count_r;
> +	unsigned int default_count_rc;
> +};
> +
> +struct platform_ops {
> +	void (*efuse_to_cal_data)(struct lvts_data *lvts_data);
> +	void (*device_enable_and_init)(struct lvts_data *lvts_data);
> +	void (*device_enable_auto_rck)(struct lvts_data *lvts_data);
> +	int (*device_read_count_rc_n)(struct lvts_data *lvts_data);
> +	void (*set_cal_data)(struct lvts_data *lvts_data);
> +	void (*init_controller)(struct lvts_data *lvts_data);
> +};
> +
> +struct power_domain {
> +	void __iomem *base;	/* LVTS base addresses */
> +	unsigned int irq_num;	/* LVTS interrupt numbers */
> +	struct reset_control *reset;
> +};
> +
> +struct sensor_data {
> +	int temp;		/* Current temperature */
> +	unsigned int msr_raw;	/* MSR raw data from LVTS */
> +};
> +
> +struct lvts_data {
> +	struct device *dev;
> +	struct clk *clk;
> +	unsigned int num_domain;
> +	struct power_domain *domain;
> +
> +	int num_tc;			/* Number of LVTS thermal controllers */
> +	struct tc_settings *tc;
> +	int counting_window_us;		/* LVTS device counting window */
> +
> +	int num_sensor;			/* Number of sensors in this platform */
> +	struct sensor_data *sen_data;
> +
> +	struct platform_ops ops;
> +	int feature_bitmap;		/* Show what features are enabled */
> +
> +	unsigned int num_efuse_addr;
> +	unsigned int *efuse;
> +	unsigned int num_efuse_block;	/* Number of contiguous efuse indexes */
> +	struct sensor_cal_data cal_data;
> +	struct formula_coeff coeff;
> +};
> +
> +struct soc_temp_tz {
> +	unsigned int id; /* if id is 0, get max temperature of all sensors */
> +	struct lvts_data *lvts_data;
> +};
> +
> +struct match_entry {
> +	char	chip[32];
> +	struct lvts_data *lvts_data;
> +};
> +
> +struct lvts_match_data {
> +	unsigned int hw_version;
> +	struct match_entry *table;
> +	void (*set_up_common_callbacks)(struct lvts_data *lvts_data);
> +	struct list_head node;
> +};
> +
> +struct lvts_id {
> +	unsigned int hw_version;
> +	char	chip[32];
> +};
> +
> +/*==================================================
> + * LVTS device register
> + *==================================================
> + */
> +#define RG_TSFM_DATA_0	0x00
> +#define RG_TSFM_DATA_1	0x01
> +#define RG_TSFM_DATA_2	0x02
> +#define RG_TSFM_CTRL_0	0x03
> +#define RG_TSFM_CTRL_1	0x04
> +#define RG_TSFM_CTRL_2	0x05
> +#define RG_TSFM_CTRL_3	0x06
> +#define RG_TSFM_CTRL_4	0x07
> +#define RG_TSV2F_CTRL_0	0x08
> +#define RG_TSV2F_CTRL_1	0x09
> +#define RG_TSV2F_CTRL_2	0x0A
> +#define RG_TSV2F_CTRL_3	0x0B
> +#define RG_TSV2F_CTRL_4	0x0C
> +#define RG_TSV2F_CTRL_5	0x0D
> +#define RG_TSV2F_CTRL_6	0x0E
> +#define RG_TEMP_DATA_0	0x10
> +#define RG_TEMP_DATA_1	0x11
> +#define RG_TEMP_DATA_2	0x12
> +#define RG_TEMP_DATA_3	0x13
> +#define RG_RC_DATA_0	0x14
> +#define RG_RC_DATA_1	0x15
> +#define RG_RC_DATA_2	0x16
> +#define RG_RC_DATA_3	0x17
> +#define RG_DIV_DATA_0	0x18
> +#define RG_DIV_DATA_1	0x19
> +#define RG_DIV_DATA_2	0x1A
> +#define RG_DIV_DATA_3	0x1B
> +#define RG_TST_DATA_0	0x70
> +#define RG_TST_DATA_1	0x71
> +#define RG_TST_DATA_2	0x72
> +#define RG_TST_CTRL	0x73
> +#define RG_DBG_FQMTR	0xF0
> +#define RG_DBG_LPSEQ	0xF1
> +#define RG_DBG_STATE	0xF2
> +#define RG_DBG_CHKSUM	0xF3
> +#define RG_DID_LVTS	0xFC
> +#define RG_DID_REV	0xFD
> +#define RG_TSFM_RST	0xFF
> +/*==================================================
> + * LVTS controller register
> + *==================================================
> + */
> +#define LVTSMONCTL0_0	0x000
> +#define LVTS_SINGLE_SENSE	BIT(9)
> +#define ENABLE_SENSING_POINT(num)	(LVTS_SINGLE_SENSE | GENMASK(((num) - 1), 0))
> +#define DISABLE_SENSING_POINT	(LVTS_SINGLE_SENSE | 0x0)
> +#define LVTSMONCTL1_0	0x004
> +#define LVTSMONCTL2_0	0x008
> +#define LVTSMONINT_0	0x00C
> +#define STAGE3_INT_EN	BIT(31)
> +#define LVTSMONINTSTS_0	0x010
> +#define LVTSMONIDET0_0	0x014
> +#define LVTSMONIDET1_0	0x018
> +#define LVTSMONIDET2_0	0x01C
> +#define LVTSMONIDET3_0	0x020
> +#define LVTSH2NTHRE_0	0x024
> +#define LVTSHTHRE_0	0x028
> +#define LVTSCTHRE_0	0x02C
> +#define LVTSOFFSETH_0	0x030
> +#define LVTSOFFSETL_0	0x034
> +#define LVTSMSRCTL0_0	0x038
> +#define LVTSMSRCTL1_0	0x03C
> +#define LVTSTSSEL_0	0x040
> +#define SET_SENSOR_INDEX	0x13121110
> +#define LVTSDEVICETO_0	0x044
> +#define LVTSCALSCALE_0	0x048
> +#define SET_CALC_SCALE_RULES	0x00000300
> +#define LVTS_ID_0	0x04C
> +#define LVTS_CONFIG_0	0x050
> +
> +#define BROADCAST_ID_UPDATE	BIT(26)
> +#define DEVICE_SENSING_STATUS	BIT(25)
> +#define DEVICE_ACCESS_STARTUS	BIT(24)
> +#define WRITE_ACCESS		BIT(16)
> +#define DEVICE_WRITE		(BIT(31) | CK26M_ACTIVE | DEVICE_ACCESS_STARTUS \
> +				| BIT(17) | WRITE_ACCESS)
> +#define DEVICE_READ		(BIT(31) | CK26M_ACTIVE | DEVICE_ACCESS_STARTUS \
> +				| 1 << 17)
> +#define RESET_ALL_DEVICES	(DEVICE_WRITE | RG_TSFM_RST << 8 | 0xFF)
> +#define READ_BACK_DEVICE_ID	(BIT(31) | CK26M_ACTIVE | BROADCAST_ID_UPDATE	\
> +				| DEVICE_ACCESS_STARTUS | BIT(17)	\
> +				| RG_DID_LVTS << 8)
> +#define READ_DEVICE_REG(reg_idx)	(DEVICE_READ | (reg_idx) << 8 | 0x00)
> +#define LVTSEDATA00_0	0x054
> +#define LVTSEDATA01_0	0x058
> +#define LVTSEDATA02_0	0x05C
> +#define LVTSEDATA03_0	0x060
> +#define LVTSMSR0_0	0x090
> +#define MRS_RAW_MASK		GENMASK(15, 0)
> +#define MRS_RAW_VALID_BIT	BIT(16)
> +#define LVTSMSR1_0	0x094
> +#define LVTSMSR2_0	0x098
> +#define LVTSMSR3_0	0x09C
> +#define LVTSIMMD0_0	0x0A0
> +#define LVTSIMMD1_0	0x0A4
> +#define LVTSIMMD2_0	0x0A8
> +#define LVTSIMMD3_0	0x0AC
> +#define LVTSRDATA0_0	0x0B0
> +#define LVTSRDATA1_0	0x0B4
> +#define LVTSRDATA2_0	0x0B8
> +#define LVTSRDATA3_0	0x0BC
> +#define LVTSPROTCTL_0	0x0C0
> +#define PROTOFFSET	GENMASK(15, 0)
> +#define LVTSPROTTA_0	0x0C4
> +#define LVTSPROTTB_0	0x0C8
> +#define LVTSPROTTC_0	0x0CC
> +#define LVTSCLKEN_0	0x0E4
> +#define ENABLE_LVTS_CTRL_CLK	(1)
> +#define DISABLE_LVTS_CTRL_CLK	(0)
> +#define LVTSDBGSEL_0	0x0E8
> +#define LVTSDBGSIG_0	0x0EC
> +#define LVTSSPARE0_0	0x0F0
> +#define LVTSSPARE1_0	0x0F4
> +#define LVTSSPARE2_0	0x0F8
> +#define LVTSSPARE3_0	0x0FC
> +
> +#define THERMINTST	0xF04
> +/*==================================================
> + * LVTS register mask
> + *==================================================
> + */
> +#define THERMAL_COLD_INTERRUPT_0		0x00000001
> +#define THERMAL_HOT_INTERRUPT_0			0x00000002
> +#define THERMAL_LOW_OFFSET_INTERRUPT_0		0x00000004
> +#define THERMAL_HIGH_OFFSET_INTERRUPT_0		0x00000008
> +#define THERMAL_HOT2NORMAL_INTERRUPT_0		0x00000010
> +#define THERMAL_COLD_INTERRUPT_1		0x00000020
> +#define THERMAL_HOT_INTERRUPT_1			0x00000040
> +#define THERMAL_LOW_OFFSET_INTERRUPT_1		0x00000080
> +#define THERMAL_HIGH_OFFSET_INTERRUPT_1		0x00000100
> +#define THERMAL_HOT2NORMAL_INTERRUPT_1		0x00000200
> +#define THERMAL_COLD_INTERRUPT_2		0x00000400
> +#define THERMAL_HOT_INTERRUPT_2			0x00000800
> +#define THERMAL_LOW_OFFSET_INTERRUPT_2		0x00001000
> +#define THERMAL_HIGH_OFFSET_INTERRUPT_2		0x00002000
> +#define THERMAL_HOT2NORMAL_INTERRUPT_2		0x00004000
> +#define THERMAL_AHB_TIMEOUT_INTERRUPT		0x00008000
> +#define THERMAL_DEVICE_TIMEOUT_INTERRUPT	0x00008000
> +#define THERMAL_IMMEDIATE_INTERRUPT_0		0x00010000
> +#define THERMAL_IMMEDIATE_INTERRUPT_1		0x00020000
> +#define THERMAL_IMMEDIATE_INTERRUPT_2		0x00040000
> +#define THERMAL_FILTER_INTERRUPT_0		0x00080000
> +#define THERMAL_FILTER_INTERRUPT_1		0x00100000
> +#define THERMAL_FILTER_INTERRUPT_2		0x00200000
> +#define THERMAL_COLD_INTERRUPT_3		0x00400000
> +#define THERMAL_HOT_INTERRUPT_3			0x00800000
> +#define THERMAL_LOW_OFFSET_INTERRUPT_3		0x01000000
> +#define THERMAL_HIGH_OFFSET_INTERRUPT_3		0x02000000
> +#define THERMAL_HOT2NORMAL_INTERRUPT_3		0x04000000
> +#define THERMAL_IMMEDIATE_INTERRUPT_3		0x08000000
> +#define THERMAL_FILTER_INTERRUPT_3		0x10000000
> +#define THERMAL_PROTECTION_STAGE_1		0x20000000
> +#define THERMAL_PROTECTION_STAGE_2		0x40000000
> +#define THERMAL_PROTECTION_STAGE_3		0x80000000
> +#endif /* __MTK_SOC_TEMP_LVTS_H__ */

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [v3,1/3] thermal: mediatek: Relocate driver to mediatek folder
  2021-04-07  9:08   ` Michael Kao
@ 2021-04-07  9:10     ` Daniel Lezcano
  0 siblings, 0 replies; 11+ messages in thread
From: Daniel Lezcano @ 2021-04-07  9:10 UTC (permalink / raw)
  To: Michael Kao, Zhang Rui
  Cc: linux-pm, srv_heupstream, Eduardo Valentin, Rob Herring,
	Mark Rutland, Matthias Brugger, hsinyi, devicetree, linux-kernel,
	linux-arm-kernel, linux-mediatek

On 07/04/2021 11:08, Michael Kao wrote:
> Hi Maintainers,
>  
> Gentle pin for this patch.
>  
> Thanks

ack, pong



-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [v3,1/3] thermal: mediatek: Relocate driver to mediatek folder
  2021-03-12  3:40 ` [v3,1/3] thermal: mediatek: Relocate driver to mediatek folder Michael Kao
  2021-04-07  9:08   ` Michael Kao
@ 2021-04-20 21:22   ` Daniel Lezcano
  2021-04-22  8:32     ` Michael Kao
  2021-04-22  8:47     ` Michael Kao
  1 sibling, 2 replies; 11+ messages in thread
From: Daniel Lezcano @ 2021-04-20 21:22 UTC (permalink / raw)
  To: Michael Kao, Zhang Rui, linux-pm, srv_heupstream
  Cc: Eduardo Valentin, Rob Herring, Mark Rutland, Matthias Brugger,
	hsinyi, devicetree, linux-kernel, linux-arm-kernel,
	linux-mediatek

On 12/03/2021 04:40, Michael Kao wrote:
> Add Mediatek proprietary folder to upstream more thermal zone and cooler
> drivers. Relocate the original thermal controller driver to it and rename
> as soc_temp.c to show its purpose more clearly.

We already know the purpose :)

soc_temp gives no additional information.

Either keep the name or give the hardware sensor name. It is a driver
directory.

> Signed-off-by: Michael Kao <michael.kao@mediatek.com>
> ---
>  drivers/thermal/Kconfig                       | 14 ++++-------
>  drivers/thermal/Makefile                      |  2 +-
>  drivers/thermal/mediatek/Kconfig              | 23 +++++++++++++++++++
>  drivers/thermal/mediatek/Makefile             |  1 +
>  .../{mtk_thermal.c => mediatek/soc_temp.c}    |  0

[ ... ]

vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv


> +config MTK_THERMAL
> +	tristate "Mediatek thermal drivers"
> +	depends on THERMAL_OF
> +	help
> +	  This is the option for Mediatek thermal software
> +	  solutions. Please enable corresponding options to
> +	  get temperature information from thermal sensors or
> +	  turn on throttle mechaisms for thermal mitigation.
> +
> +if MTK_THERMAL


^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

All the above not needed.

> +config MTK_SOC_THERMAL
> +	tristate "Temperature sensor driver for mediatek SoCs"
> +	depends on HAS_IOMEM
> +	depends on NVMEM
> +	depends on RESET_CONTROLLER
> +	help
> +	  Enable this option if you want to get SoC temperature
> +	  information for Mediatek platforms. This driver
> +	  configures thermal controllers to collect temperature
> +	  via AUXADC interface.
> +
> +endif
> diff --git a/drivers/thermal/mediatek/Makefile b/drivers/thermal/mediatek/Makefile
> new file mode 100644
> index 000000000000..f75313ddce5e
> --- /dev/null
> +++ b/drivers/thermal/mediatek/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_MTK_SOC_THERMAL)	+= soc_temp.o
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mediatek/soc_temp.c
> similarity index 100%
> rename from drivers/thermal/mtk_thermal.c
> rename to drivers/thermal/mediatek/soc_temp.c



-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [v3,1/3] thermal: mediatek: Relocate driver to mediatek folder
  2021-04-20 21:22   ` Daniel Lezcano
@ 2021-04-22  8:32     ` Michael Kao
  2021-04-22  8:47     ` Michael Kao
  1 sibling, 0 replies; 11+ messages in thread
From: Michael Kao @ 2021-04-22  8:32 UTC (permalink / raw)
  To: Daniel Lezcano, Zhang Rui, linux-pm, srv_heupstream
  Cc: Eduardo Valentin, Rob Herring, Mark Rutland, Matthias Brugger,
	hsinyi, devicetree, linux-kernel, linux-arm-kernel,
	linux-mediatek

On Tue, 2021-04-20 at 23:22 +0200, Daniel Lezcano wrote:
> On 12/03/2021 04:40, Michael Kao wrote:
> > Add Mediatek proprietary folder to upstream more thermal zone and
> > cooler
> > drivers. Relocate the original thermal controller driver to it and
> > rename
> > as soc_temp.c to show its purpose more clearly.
> 
> We already know the purpose :)
> 
> soc_temp gives no additional information.
> 
> Either keep the name or give the hardware sensor name. It is a driver
> directory.
> 
Dear Daniel,

We introduce the new thermal hardware design called lvts in the new
project. The new project will desgin with lvts will enable the
CONFIG_MTK_SOC_THERMAL_LVTS to build lvts driver[1].
The old project will use CONFIG_MTK_THERMAL to build soc_temp.c.

The new design use lvts device to access thermal sensors in the soc.
The original design access thermal sensors by auxadc.

[1] [v3,2/3] thermal: mediatek: Add LVTS drivers for SoC theraml zones


> > Signed-off-by: Michael Kao <michael.kao@mediatek.com>
> > ---
> >  drivers/thermal/Kconfig                       | 14 ++++-------
> >  drivers/thermal/Makefile                      |  2 +-
> >  drivers/thermal/mediatek/Kconfig              | 23
> > +++++++++++++++++++
> >  drivers/thermal/mediatek/Makefile             |  1 +
> >  .../{mtk_thermal.c => mediatek/soc_temp.c}    |  0
> 
> [ ... ]
> 
> vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
> 
> 
> > +config MTK_THERMAL
> > +	tristate "Mediatek thermal drivers"
> > +	depends on THERMAL_OF
> > +	help
> > +	  This is the option for Mediatek thermal software
> > +	  solutions. Please enable corresponding options to
> > +	  get temperature information from thermal sensors or
> > +	  turn on throttle mechaisms for thermal mitigation.
> > +
> > +if MTK_THERMAL
> 
> 
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> 
> All the above not needed.
> 
> > +config MTK_SOC_THERMAL
> > +	tristate "Temperature sensor driver for mediatek SoCs"
> > +	depends on HAS_IOMEM
> > +	depends on NVMEM
> > +	depends on RESET_CONTROLLER
> > +	help
> > +	  Enable this option if you want to get SoC temperature
> > +	  information for Mediatek platforms. This driver
> > +	  configures thermal controllers to collect temperature
> > +	  via AUXADC interface.
> > +
> > +endif
> > diff --git a/drivers/thermal/mediatek/Makefile
> > b/drivers/thermal/mediatek/Makefile
> > new file mode 100644
> > index 000000000000..f75313ddce5e
> > --- /dev/null
> > +++ b/drivers/thermal/mediatek/Makefile
> > @@ -0,0 +1 @@
> > +obj-$(CONFIG_MTK_SOC_THERMAL)	+= soc_temp.o
> > diff --git a/drivers/thermal/mtk_thermal.c
> > b/drivers/thermal/mediatek/soc_temp.c
> > similarity index 100%
> > rename from drivers/thermal/mtk_thermal.c
> > rename to drivers/thermal/mediatek/soc_temp.c
> 
> 
> 
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [v3,1/3] thermal: mediatek: Relocate driver to mediatek folder
  2021-04-20 21:22   ` Daniel Lezcano
  2021-04-22  8:32     ` Michael Kao
@ 2021-04-22  8:47     ` Michael Kao
  1 sibling, 0 replies; 11+ messages in thread
From: Michael Kao @ 2021-04-22  8:47 UTC (permalink / raw)
  To: Daniel Lezcano, Zhang Rui, linux-pm, srv_heupstream
  Cc: Eduardo Valentin, Rob Herring, Mark Rutland, Matthias Brugger,
	hsinyi, devicetree, linux-kernel, linux-arm-kernel,
	linux-mediatek

On Tue, 2021-04-20 at 23:22 +0200, Daniel Lezcano wrote:
> On 12/03/2021 04:40, Michael Kao wrote:
> > Add Mediatek proprietary folder to upstream more thermal zone and
> > cooler
> > drivers. Relocate the original thermal controller driver to it and
> > rename
> > as soc_temp.c to show its purpose more clearly.
> 
> We already know the purpose :)
> 
> soc_temp gives no additional information.
> 
> Either keep the name or give the hardware sensor name. It is a driver
> directory.
> 

Dear Daniel,
The new thermal hardware design called lvts (Low voltage thermal
sensor).
Instead of original one using auxadc, the lvts use lvts device to
access thermal senosrs.
It will save power and be more efficient.
We use the config CONFIG_MTK_THERMAL and CONFIG_MTK_SOC_THERMAL_LVTS[1]
to select the different hardware archtecture.

[1] [v3,2/3] thermal: mediatek: Add LVTS drivers for SoC theraml zones

https://patchwork.kernel.org/project/linux-mediatek/patch/20210312034018.17437-3-michael.kao@mediatek.com/

> > Signed-off-by: Michael Kao <michael.kao@mediatek.com>
> > ---
> >  drivers/thermal/Kconfig                       | 14 ++++-------
> >  drivers/thermal/Makefile                      |  2 +-
> >  drivers/thermal/mediatek/Kconfig              | 23
> > +++++++++++++++++++
> >  drivers/thermal/mediatek/Makefile             |  1 +
> >  .../{mtk_thermal.c => mediatek/soc_temp.c}    |  0
> 
> [ ... ]
> 
> vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
> 
> 
> > +config MTK_THERMAL
> > +	tristate "Mediatek thermal drivers"
> > +	depends on THERMAL_OF
> > +	help
> > +	  This is the option for Mediatek thermal software
> > +	  solutions. Please enable corresponding options to
> > +	  get temperature information from thermal sensors or
> > +	  turn on throttle mechaisms for thermal mitigation.
> > +
> > +if MTK_THERMAL
> 
> 
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> 
> All the above not needed.
> 
> > +config MTK_SOC_THERMAL
> > +	tristate "Temperature sensor driver for mediatek SoCs"
> > +	depends on HAS_IOMEM
> > +	depends on NVMEM
> > +	depends on RESET_CONTROLLER
> > +	help
> > +	  Enable this option if you want to get SoC temperature
> > +	  information for Mediatek platforms. This driver
> > +	  configures thermal controllers to collect temperature
> > +	  via AUXADC interface.
> > +
> > +endif
> > diff --git a/drivers/thermal/mediatek/Makefile
> > b/drivers/thermal/mediatek/Makefile
> > new file mode 100644
> > index 000000000000..f75313ddce5e
> > --- /dev/null
> > +++ b/drivers/thermal/mediatek/Makefile
> > @@ -0,0 +1 @@
> > +obj-$(CONFIG_MTK_SOC_THERMAL)	+= soc_temp.o
> > diff --git a/drivers/thermal/mtk_thermal.c
> > b/drivers/thermal/mediatek/soc_temp.c
> > similarity index 100%
> > rename from drivers/thermal/mtk_thermal.c
> > rename to drivers/thermal/mediatek/soc_temp.c
> 
> 
> 
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, back to index

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-12  3:40 [v3,0/3] thermal: mediatek: Add LVTS architecture thermal controller Michael Kao
2021-03-12  3:40 ` [v3,1/3] thermal: mediatek: Relocate driver to mediatek folder Michael Kao
2021-04-07  9:08   ` Michael Kao
2021-04-07  9:10     ` Daniel Lezcano
2021-04-20 21:22   ` Daniel Lezcano
2021-04-22  8:32     ` Michael Kao
2021-04-22  8:47     ` Michael Kao
2021-03-12  3:40 ` [v3,2/3] thermal: mediatek: Add LVTS drivers for SoC theraml zones Michael Kao
2021-04-07  9:09   ` Michael Kao
2021-03-12  3:40 ` [v3, 3/3] dt-bindings: thermal: Add binding document for mt6873 thermal controller Michael Kao
2021-03-23 20:20   ` Rob Herring

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git