From: Ong Boon Leong <boon.leong.ong@intel.com>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Jose Abreu <joabreu@synopsys.com>,
"David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Ong Boon Leong <boon.leong.ong@intel.com>,
Voon Weifeng <weifeng.voon@intel.com>,
Wong Vee Khee <vee.khee.wong@intel.com>
Subject: [PATCH net-next 0/1] stmmac: add PCH and PSE PTP clock setting
Date: Wed, 17 Mar 2021 09:32:46 +0800 [thread overview]
Message-ID: <20210317013247.25131-1-boon.leong.ong@intel.com> (raw)
Hi,
Intel mGBE controllers that are integrated into EHL, TGL SoC have
different clock source selection. This patch adds the required setting for
running linuxptp time-sync.
The patch has been tested on both PSE (/dev/ptp0) and PCH TSN(/dev/ptp2)
and the results for the time sync looks correct.
############################ PSE TSN ####################################
> cat gPTP.conf
[global]
gmCapable 1
priority1 248
priority2 248
logAnnounceInterval 0
logSyncInterval -3
syncReceiptTimeout 3
neighborPropDelayThresh 800
min_neighbor_prop_delay -20000000
assume_two_step 1
path_trace_enabled 1
follow_up_info 1
transportSpecific 0x1
ptp_dst_mac 01:80:C2:00:00:0E
network_transport L2
delay_mechanism P2P
ingressLatency 231
egressLatency 147
tx_timestamp_timeout 50
> /usr/local/sbin/ptp4l -v
3.1
#################################
# Start ptp4l eth0 [verbose mode]
#################################
> /usr/local/sbin/ptp4l -P2Hi eth0 -f gPTP.conf --step_threshold=1 -m
ptp4l[8380.510]: selected /dev/ptp0 as PTP clock
ptp4l[8380.535]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[8380.535]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[8381.655]: port 1: link down
ptp4l[8381.655]: port 1: LISTENING to FAULTY on FAULT_DETECTED (FT_UNSPECIFIED)
ptp4l[8381.676]: selected local clock f6cd9d.fffe.e6dc36 as best master
ptp4l[8381.676]: port 1: assuming the grand master role
ptp4l[8383.705]: port 1: link up
ptp4l[8383.727]: port 1: FAULTY to LISTENING on INIT_COMPLETE
ptp4l[8387.099]: port 1: LISTENING to MASTER on ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES
ptp4l[8387.099]: selected local clock f6cd9d.fffe.e6dc36 as best master
ptp4l[8387.099]: port 1: assuming the grand master role
ptp4l[8388.357]: port 1: new foreign master d63d87.fffe.60a9eb-1
ptp4l[8390.357]: selected best master clock d63d87.fffe.60a9eb
ptp4l[8390.357]: port 1: MASTER to UNCALIBRATED on RS_SLAVE
ptp4l[8390.981]: port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED
ptp4l[8391.607]: rms 24333463708388 max 48666927416912 freq -1919 +/- 725 delay 101 +/- 0
ptp4l[8392.607]: rms 2 max 6 freq -2194 +/- 3 delay 101 +/- 0
ptp4l[8393.607]: rms 5 max 10 freq -2192 +/- 7 delay 101 +/- 0
ptp4l[8394.607]: rms 4 max 5 freq -2195 +/- 5 delay 100 +/- 0
ptp4l[8395.607]: rms 4 max 9 freq -2198 +/- 4 delay 100 +/- 0
ptp4l[8396.607]: rms 5 max 9 freq -2201 +/- 6 delay 100 +/- 0
ptp4l[8397.607]: rms 6 max 8 freq -2196 +/- 8 delay 101 +/- 0
ptp4l[8398.607]: rms 5 max 9 freq -2195 +/- 7 delay 102 +/- 0
ptp4l[8399.607]: rms 7 max 13 freq -2199 +/- 9 delay 102 +/- 0
ptp4l[8400.608]: rms 6 max 14 freq -2198 +/- 8 delay 101 +/- 0
ptp4l[8401.608]: rms 8 max 10 freq -2195 +/- 10 delay 101 +/- 0
#########################################################################
############################ PCH TSN ####################################
> cat gPTP.conf
[global]
gmCapable 1
priority1 248
priority2 248
logAnnounceInterval 0
logSyncInterval -3
syncReceiptTimeout 3
neighborPropDelayThresh 800
min_neighbor_prop_delay -20000000
assume_two_step 1
path_trace_enabled 1
follow_up_info 1
transportSpecific 0x1
ptp_dst_mac 01:80:C2:00:00:0E
network_transport L2
delay_mechanism P2P
ingressLatency 503
egressLatency 275
tx_timestamp_timeout 50
> /usr/local/sbin/ptp4l -v
3.1
#################################
# Start ptp4l eth2 [verbose mode]
#################################
> /usr/local/sbin/ptp4l -P2Hi eth2 -f gPTP.conf --step_threshold=1 -m
ptp4l[8526.902]: selected /dev/ptp2 as PTP clock
ptp4l[8526.957]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[8526.957]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[8526.957]: port 1: link down
ptp4l[8526.957]: port 1: LISTENING to FAULTY on FAULT_DETECTED (FT_UNSPECIFIED)
ptp4l[8526.978]: selected local clock 7ab054.fffe.8aaa86 as best master
ptp4l[8526.979]: port 1: assuming the grand master role
ptp4l[8528.026]: port 1: link up
ptp4l[8528.058]: port 1: FAULTY to LISTENING on INIT_COMPLETE
ptp4l[8531.070]: port 1: LISTENING to MASTER on ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES
ptp4l[8531.070]: selected local clock 7ab054.fffe.8aaa86 as best master
ptp4l[8531.070]: port 1: assuming the grand master role
ptp4l[8532.878]: port 1: new foreign master 5ee86b.fffe.dd4586-1
ptp4l[8534.878]: selected best master clock 5ee86b.fffe.dd4586
ptp4l[8534.878]: port 1: MASTER to UNCALIBRATED on RS_SLAVE
ptp4l[8535.387]: port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED
ptp4l[8536.012]: rms 24333477164408 max 48666954328964 freq -1980 +/- 749 delay 224 +/- 0
ptp4l[8537.012]: rms 48 max 61 freq -2195 +/- 13 delay 221 +/- 0
ptp4l[8538.012]: rms 29 max 43 freq -2182 +/- 6 delay 221 +/- 0
ptp4l[8539.012]: rms 13 max 27 freq -2192 +/- 14 delay 221 +/- 0
ptp4l[8540.012]: rms 8 max 13 freq -2205 +/- 10 delay 221 +/- 0
ptp4l[8541.013]: rms 12 max 20 freq -2217 +/- 13 delay 224 +/- 0
ptp4l[8542.013]: rms 7 max 17 freq -2214 +/- 10 delay 221 +/- 0
ptp4l[8543.013]: rms 7 max 11 freq -2208 +/- 10 delay 221 +/- 0
ptp4l[8544.013]: rms 8 max 16 freq -2214 +/- 10 delay 220 +/- 0
#########################################################################
Thanks
Boon Leong
Wong, Vee Khee (1):
stmmac: intel: Add PSE and PCH PTP clock source selection
.../net/ethernet/stmicro/stmmac/dwmac-intel.c | 46 +++++++++++++++++++
drivers/net/ethernet/stmicro/stmmac/dwmac4.h | 7 +++
.../net/ethernet/stmicro/stmmac/stmmac_ptp.c | 3 ++
include/linux/stmmac.h | 1 +
4 files changed, 57 insertions(+)
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-03-17 1:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-17 1:32 Ong Boon Leong [this message]
2021-03-17 1:32 ` [PATCH net-next 1/1] stmmac: intel: Add PSE and PCH PTP clock source selection Ong Boon Leong
2021-03-19 2:20 ` [PATCH net-next 0/1] stmmac: add PCH and PSE PTP clock setting patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210317013247.25131-1-boon.leong.ong@intel.com \
--to=boon.leong.ong@intel.com \
--cc=alexandre.torgue@st.com \
--cc=davem@davemloft.net \
--cc=joabreu@synopsys.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
--cc=vee.khee.wong@intel.com \
--cc=weifeng.voon@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).