Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org,
	linuxppc-dev@lists.ozlabs.org, linux-sh@vger.kernel.org
Cc: Daniel Mack <daniel@zonque.org>,
	Robert Jarzmik <robert.jarzmik@free.fr>,
	Haojian Zhuang <haojian.zhuang@gmail.com>,
	Yoshinori Sato <ysato@users.sourceforge.jp>,
	Rich Felker <dalias@libc.org>,
	Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	Michael Ellerman <mpe@ellerman.id.au>,
	Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH 8/9] powerpc: Convert irq_domain_add_legacy_isa use to irq_domain_add_legacy
Date: Tue,  6 Apr 2021 10:35:56 +0100
Message-ID: <20210406093557.1073423-9-maz@kernel.org> (raw)
In-Reply-To: <20210406093557.1073423-1-maz@kernel.org>

irq_domain_add_legacy_isa is a pain. It only exists for the benefit of
two PPC-specific drivers, and creates an ugly dependency between asm/irq.h
and linux/irqdomain.h

Instead, let's convert these two drivers to irq_domain_add_legacy(),
stop using NUM_ISA_INTERRUPTS by directly setting NR_IRQS_LEGACY.

The dependency cannot be broken yet as there is a lot of PPC-related
code that depends on it, but that's the first step towards it.

A followup patch will remove irq_domain_add_legacy_isa.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 arch/powerpc/include/asm/irq.h         | 4 ++--
 arch/powerpc/platforms/ps3/interrupt.c | 4 ++--
 arch/powerpc/sysdev/i8259.c            | 3 ++-
 arch/powerpc/sysdev/mpic.c             | 2 +-
 arch/powerpc/sysdev/tsi108_pci.c       | 3 ++-
 arch/powerpc/sysdev/xics/xics-common.c | 2 +-
 6 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index f3f264e441a7..aeb209144c68 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -23,8 +23,8 @@ extern atomic_t ppc_n_lost_interrupts;
 /* Total number of virq in the platform */
 #define NR_IRQS		CONFIG_NR_IRQS
 
-/* Same thing, used by the generic IRQ code */
-#define NR_IRQS_LEGACY		NUM_ISA_INTERRUPTS
+/* Number of irqs reserved for a legacy isa controller */
+#define NR_IRQS_LEGACY		16
 
 extern irq_hw_number_t virq_to_hw(unsigned int virq);
 
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index 78f2339ed5cb..93e367a00452 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -45,7 +45,7 @@
  * implementation equates HV plug value to Linux virq value, constrains each
  * interrupt to have a system wide unique plug number, and limits the range
  * of the plug values to map into the first dword of the bitmaps.  This
- * gives a usable range of plug values of  {NUM_ISA_INTERRUPTS..63}.  Note
+ * gives a usable range of plug values of  {NR_IRQS_LEGACY..63}.  Note
  * that there is no constraint on how many in this set an individual thread
  * can acquire.
  *
@@ -721,7 +721,7 @@ static unsigned int ps3_get_irq(void)
 	}
 
 #if defined(DEBUG)
-	if (unlikely(plug < NUM_ISA_INTERRUPTS || plug > PS3_PLUG_MAX)) {
+	if (unlikely(plug < NR_IRQS_LEGACY || plug > PS3_PLUG_MAX)) {
 		dump_bmp(&per_cpu(ps3_private, 0));
 		dump_bmp(&per_cpu(ps3_private, 1));
 		BUG();
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
index c1d76c344351..dc1a151c63d7 100644
--- a/arch/powerpc/sysdev/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -260,7 +260,8 @@ void i8259_init(struct device_node *node, unsigned long intack_addr)
 	raw_spin_unlock_irqrestore(&i8259_lock, flags);
 
 	/* create a legacy host */
-	i8259_host = irq_domain_add_legacy_isa(node, &i8259_host_ops, NULL);
+	i8259_host = irq_domain_add_legacy(node, NR_IRQS_LEGACY, 0, 0,
+					   &i8259_host_ops, NULL);
 	if (i8259_host == NULL) {
 		printk(KERN_ERR "i8259: failed to allocate irq host !\n");
 		return;
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index b0426f28946a..995fb2ada507 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -602,7 +602,7 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic)
 /* Find an mpic associated with a given linux interrupt */
 static struct mpic *mpic_find(unsigned int irq)
 {
-	if (irq < NUM_ISA_INTERRUPTS)
+	if (irq < NR_IRQS_LEGACY)
 		return NULL;
 
 	return irq_get_chip_data(irq);
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index 49f9541954f8..042bb38fa5c2 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -404,7 +404,8 @@ void __init tsi108_pci_int_init(struct device_node *node)
 {
 	DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
 
-	pci_irq_host = irq_domain_add_legacy_isa(node, &pci_irq_domain_ops, NULL);
+	pci_irq_host = irq_domain_add_legacy(node, NR_IRQS_LEGACY, 0, 0,
+					     &pci_irq_domain_ops, NULL);
 	if (pci_irq_host == NULL) {
 		printk(KERN_ERR "pci_irq_host: failed to allocate irq domain!\n");
 		return;
diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c
index 7e4305c01bac..fdf8db4444b6 100644
--- a/arch/powerpc/sysdev/xics/xics-common.c
+++ b/arch/powerpc/sysdev/xics/xics-common.c
@@ -201,7 +201,7 @@ void xics_migrate_irqs_away(void)
 		struct ics *ics;
 
 		/* We can't set affinity on ISA interrupts */
-		if (virq < NUM_ISA_INTERRUPTS)
+		if (virq < NR_IRQS_LEGACY)
 			continue;
 		/* We only need to migrate enabled IRQS */
 		if (!desc->action)
-- 
2.29.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-06  9:35 [PATCH 0/9] Cleaning up some of the irqdomain features Marc Zyngier
2021-04-06  9:35 ` [PATCH 1/9] irqdomain: Reimplement irq_linear_revmap() with irq_find_mapping() Marc Zyngier
2021-04-06 11:21   ` Christophe Leroy
2021-04-06 12:12     ` Marc Zyngier
2021-04-06  9:35 ` [PATCH 2/9] ARM: PXA: Kill use of irq_create_strict_mappings() Marc Zyngier
2021-04-26 22:39   ` Guenter Roeck
2021-04-27  8:30     ` Marc Zyngier
2021-04-27 12:56       ` Guenter Roeck
2021-04-06  9:35 ` [PATCH 3/9] irqchip/jcore-aic: " Marc Zyngier
2021-04-06  9:35 ` [PATCH 4/9] sh: intc: Drop the use of irq_create_identity_mapping() Marc Zyngier
2021-04-06 10:32   ` Geert Uytterhoeven
2021-04-06 13:02     ` Marc Zyngier
2021-04-06  9:35 ` [PATCH 5/9] irqdomain: Kill irq_create_strict_mappings()/irq_create_identity_mapping() Marc Zyngier
2021-04-06  9:35 ` [PATCH 6/9] mips: netlogic: Use irq_domain_simple_ops for XLP PIC Marc Zyngier
2021-04-06 11:36   ` Thomas Bogendoerfer
2021-04-06  9:35 ` [PATCH 7/9] irqdomain: Drop references to recusive irqdomain setup Marc Zyngier
2021-04-06  9:35 ` Marc Zyngier [this message]
2021-04-06  9:35 ` [PATCH 9/9] irqdomain: Kill irq_domain_add_legacy_isa Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210406093557.1073423-9-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=dalias@libc.org \
    --cc=daniel@zonque.org \
    --cc=haojian.zhuang@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=robert.jarzmik@free.fr \
    --cc=tglx@linutronix.de \
    --cc=tsbogend@alpha.franken.de \
    --cc=ysato@users.sourceforge.jp \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git