linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH net-next 0/5] Flow control for NXP ENETC
@ 2021-04-16 23:42 Vladimir Oltean
  2021-04-16 23:42 ` [PATCH net-next 1/5] net: enetc: create a common enetc_pf_to_port helper Vladimir Oltean
                   ` (7 more replies)
  0 siblings, 8 replies; 14+ messages in thread
From: Vladimir Oltean @ 2021-04-16 23:42 UTC (permalink / raw)
  To: Jakub Kicinski, David S. Miller, netdev, Po Liu
  Cc: Claudiu Manoil, Alex Marginean, Rob Herring, Shawn Guo,
	linux-arm-kernel, devicetree, Russell King - ARM Linux admin,
	Andrew Lunn, Michael Walle, Vladimir Oltean

From: Vladimir Oltean <vladimir.oltean@nxp.com>

This patch series contains logic for enabling the lossless mode on the
RX rings of the ENETC, and the PAUSE thresholds on the internal FIFO
memory.

During testing it was found that, with the default FIFO configuration,
a sender which isn't persuaded by our PAUSE frames and keeps sending
will cause some MAC RX frame errors. To mitigate this, we need to ensure
that the FIFO never runs completely full, so we need to fix up a setting
that was supposed to be configured well out of reset. Unfortunately this
requires the addition of a new mini-driver.

Vladimir Oltean (5):
  net: enetc: create a common enetc_pf_to_port helper
  dt-bindings: net: fsl: enetc: add the IERB documentation
  net: enetc: add a mini driver for the Integrated Endpoint Register
    Block
  arm64: dts: ls1028a: declare the Integrated Endpoint Register Block
    node
  net: enetc: add support for flow control

 .../devicetree/bindings/net/fsl-enetc.txt     |  15 ++
 .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi |   6 +
 drivers/net/ethernet/freescale/enetc/Kconfig  |   9 +
 drivers/net/ethernet/freescale/enetc/Makefile |   3 +
 drivers/net/ethernet/freescale/enetc/enetc.h  |  16 ++
 .../ethernet/freescale/enetc/enetc_ethtool.c  |  18 ++
 .../net/ethernet/freescale/enetc/enetc_hw.h   |   9 +
 .../net/ethernet/freescale/enetc/enetc_ierb.c | 155 ++++++++++++++++++
 .../net/ethernet/freescale/enetc/enetc_ierb.h |  20 +++
 .../net/ethernet/freescale/enetc/enetc_pf.c   |  95 ++++++++++-
 .../net/ethernet/freescale/enetc/enetc_qos.c  |  16 +-
 11 files changed, 349 insertions(+), 13 deletions(-)
 create mode 100644 drivers/net/ethernet/freescale/enetc/enetc_ierb.c
 create mode 100644 drivers/net/ethernet/freescale/enetc/enetc_ierb.h

-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2021-04-20 14:19 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-16 23:42 [PATCH net-next 0/5] Flow control for NXP ENETC Vladimir Oltean
2021-04-16 23:42 ` [PATCH net-next 1/5] net: enetc: create a common enetc_pf_to_port helper Vladimir Oltean
2021-04-16 23:42 ` [PATCH net-next 2/5] dt-bindings: net: fsl: enetc: add the IERB documentation Vladimir Oltean
2021-04-16 23:42 ` [PATCH net-next 3/5] net: enetc: add a mini driver for the Integrated Endpoint Register Block Vladimir Oltean
2021-04-16 23:42 ` [PATCH net-next 4/5] arm64: dts: ls1028a: declare the Integrated Endpoint Register Block node Vladimir Oltean
2021-04-16 23:42 ` [PATCH net-next 5/5] net: enetc: add support for flow control Vladimir Oltean
2021-04-19  9:07   ` Claudiu Manoil
2021-04-19 21:04 ` [PATCH net-next 0/5] Flow control for NXP ENETC Jakub Kicinski
2021-04-19 21:49   ` Vladimir Oltean
2021-04-19 22:40 ` patchwork-bot+netdevbpf
2021-04-20 13:27 ` Michael Walle
2021-04-20 14:04   ` Vladimir Oltean
2021-04-20 14:10     ` Michael Walle
2021-04-20 14:16       ` Vladimir Oltean

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).