linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Grygorii Strashko <grygorii.strashko@ti.com>
Cc: linux-gpio@vger.kernel.org, linux-omap@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Aaro Koskinen <aaro.koskinen@iki.fi>,
	Adam Ford <aford173@gmail.com>,
	Andreas Kemnade <andreas@kemnade.info>,
	Peter Ujfalusi <peter.ujfalusi@gmail.com>
Subject: [PATCHv2] gpio: omap: Save and restore sysconfig
Date: Sat, 17 Apr 2021 11:38:39 +0300	[thread overview]
Message-ID: <20210417083839.46985-1-tony@atomide.com> (raw)

As we are using cpu_pm to save and restore context, we must also save and
restore the GPIO sysconfig register. This is needed because we are not
calling PM runtime functions at all with cpu_pm.

We need to save the sysconfig on idle as it's value can get reconfigured by
PM runtime and can be different from the init time value. Device specific
flags like "ti,no-idle-on-init" can affect the init value.

Fixes: b764a5863fd8 ("gpio: omap: Remove custom PM calls and use cpu_pm instead")
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Adam Ford <aford173@gmail.com>
Cc: Andreas Kemnade <andreas@kemnade.info>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/gpio/gpio-omap.c                | 9 +++++++++
 include/linux/platform_data/gpio-omap.h | 3 +++
 2 files changed, 12 insertions(+)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -29,6 +29,7 @@
 #define OMAP4_GPIO_DEBOUNCINGTIME_MASK 0xFF
 
 struct gpio_regs {
+	u32 sysconfig;
 	u32 irqenable1;
 	u32 irqenable2;
 	u32 wake_en;
@@ -1069,6 +1070,7 @@ static void omap_gpio_init_context(struct gpio_bank *p)
 	const struct omap_gpio_reg_offs *regs = p->regs;
 	void __iomem *base = p->base;
 
+	p->context.sysconfig	= readl_relaxed(base + regs->sysconfig);
 	p->context.ctrl		= readl_relaxed(base + regs->ctrl);
 	p->context.oe		= readl_relaxed(base + regs->direction);
 	p->context.wake_en	= readl_relaxed(base + regs->wkup_en);
@@ -1088,6 +1090,7 @@ static void omap_gpio_restore_context(struct gpio_bank *bank)
 	const struct omap_gpio_reg_offs *regs = bank->regs;
 	void __iomem *base = bank->base;
 
+	writel_relaxed(bank->context.sysconfig, base + regs->sysconfig);
 	writel_relaxed(bank->context.wake_en, base + regs->wkup_en);
 	writel_relaxed(bank->context.ctrl, base + regs->ctrl);
 	writel_relaxed(bank->context.leveldetect0, base + regs->leveldetect0);
@@ -1115,6 +1118,10 @@ static void omap_gpio_idle(struct gpio_bank *bank, bool may_lose_context)
 
 	bank->saved_datain = readl_relaxed(base + bank->regs->datain);
 
+	/* Save syconfig, it's runtime value can be different from init value */
+	if (bank->loses_context)
+		bank->context.sysconfig = readl_relaxed(base + bank->regs->sysconfig);
+
 	if (!bank->enabled_non_wakeup_gpios)
 		goto update_gpio_context_count;
 
@@ -1279,6 +1286,7 @@ static int gpio_omap_cpu_notifier(struct notifier_block *nb,
 
 static const struct omap_gpio_reg_offs omap2_gpio_regs = {
 	.revision =		OMAP24XX_GPIO_REVISION,
+	.sysconfig =		OMAP24XX_GPIO_SYSCONFIG,
 	.direction =		OMAP24XX_GPIO_OE,
 	.datain =		OMAP24XX_GPIO_DATAIN,
 	.dataout =		OMAP24XX_GPIO_DATAOUT,
@@ -1302,6 +1310,7 @@ static const struct omap_gpio_reg_offs omap2_gpio_regs = {
 
 static const struct omap_gpio_reg_offs omap4_gpio_regs = {
 	.revision =		OMAP4_GPIO_REVISION,
+	.sysconfig =		OMAP4_GPIO_SYSCONFIG,
 	.direction =		OMAP4_GPIO_OE,
 	.datain =		OMAP4_GPIO_DATAIN,
 	.dataout =		OMAP4_GPIO_DATAOUT,
diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h
--- a/include/linux/platform_data/gpio-omap.h
+++ b/include/linux/platform_data/gpio-omap.h
@@ -85,6 +85,7 @@
  * omap2+ specific GPIO registers
  */
 #define OMAP24XX_GPIO_REVISION		0x0000
+#define OMAP24XX_GPIO_SYSCONFIG		0x0010
 #define OMAP24XX_GPIO_IRQSTATUS1	0x0018
 #define OMAP24XX_GPIO_IRQSTATUS2	0x0028
 #define OMAP24XX_GPIO_IRQENABLE2	0x002c
@@ -108,6 +109,7 @@
 #define OMAP24XX_GPIO_SETDATAOUT	0x0094
 
 #define OMAP4_GPIO_REVISION		0x0000
+#define OMAP4_GPIO_SYSCONFIG		0x0010
 #define OMAP4_GPIO_EOI			0x0020
 #define OMAP4_GPIO_IRQSTATUSRAW0	0x0024
 #define OMAP4_GPIO_IRQSTATUSRAW1	0x0028
@@ -148,6 +150,7 @@
 #ifndef __ASSEMBLER__
 struct omap_gpio_reg_offs {
 	u16 revision;
+	u16 sysconfig;
 	u16 direction;
 	u16 datain;
 	u16 dataout;
-- 
2.31.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-04-17  8:40 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-17  8:38 Tony Lindgren [this message]
2021-04-20 10:50 ` [PATCHv2] gpio: omap: Save and restore sysconfig Grygorii Strashko
2021-04-21 14:44 ` Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210417083839.46985-1-tony@atomide.com \
    --to=tony@atomide.com \
    --cc=aaro.koskinen@iki.fi \
    --cc=aford173@gmail.com \
    --cc=andreas@kemnade.info \
    --cc=bgolaszewski@baylibre.com \
    --cc=grygorii.strashko@ti.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=peter.ujfalusi@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).